Optical waveguides and switches based on periodic arrays of carbon nanotubes

This document presents the modeling and characterization of novel optical devices based on periodic arrays of multiwalled carbon nanotubes. Vertically aligned carbon nanotubes can be grown in the arrangement of two-dimensional arrays of precisely determined dimensions. Having their dimensions comparable to the wavelength of light makes carbon nanotubes good candidates for utilization in nano-scale optical devices. We report that highly dense periodic arrays of multiwalled carbon nanotubes can be utilized as sub-wavelength structures for establishing advanced optical materials, such as metamaterials and photonic crystals. We demonstrate that when carbon nanotubes are grown close together at spacing of the order of few hundred nanometers, they display artificial optical properties towards the incident light, acting as metamaterials. By utilizing these properties we have established micro-scaled plasmonic high pass filter which operates in the optical domain. Highly dense arrays of multiwalled also offer a periodic dielectric constant to the incident light and display interesting photonic band gaps, which are frequency domains within which on wave propagation can take place. We have utilized these band gaps displayed by a periodic nanotube array, having 400 nm spacing, to construct photonic crystals based optical waveguides and switches. © 2011 IEEE.

Magnetic sensor with compensation for lead and coil resistance

A measurement system for magnetic fields or electric currents uses a single-core fluxgate, magneto-inductive or magneto-impedance device driven from a radio frequency excitation source. Flux nulling feedback circuitry is provided to maintain the core of the sensor at substantially zero net flux and improve the linearity and dynamic response of the sensor system. A high pass filter is provided for reducing the dc effects of the ohmic resistance of the coil and lead wires on the effectiveness of the flux nulling feedback.

Simultaneous reduction of particulate matter and NOx emissions using 4-way catalyzed filtration systems

The next generation of diesel emission control devices includes 4-way catalyzed filtration systems (4WCFS) consisting of both NOx and diesel particulate matter (DPM) control. A methodology was developed to simultaneously evaluate the NOx and DPM control performance of miniature 4WCFS made from acicular mullite, an advanced ceramic material (ACM), that were challenged with diesel exhaust. The impact of catalyst loading and substrate porosity on catalytic performance of the NOx trap was evaluated. Simultaneously with NOx measurements, the real-time solid particle filtration performance of catalyst-coated standard and high porosity filters was determined for steady-state and regenerative conditions. The use of high porosity ACM 4-way catalyzed filtration systems reduced NOx by 99% and solid and total particulate matter by 95% when averaged over 10 regeneration cycles. A "regeneration cycle" refers to an oxidizing ("lean") exhaust condition followed by a reducing ("rich") exhaust condition resulting in NOx storage and NOx reduction (i.e., trap "regeneration"), respectively. Standard porosity ACM 4-way catalyzed filtration systems reduced NOx by 60-75% and exhibited 99.9% filtration efficiency. The rich/lean cycling used to regenerate the filter had almost no impact on solid particle filtration efficiency but impacted NOx control. Cycling resulted in the formation of very low concentrations of semivolatile nucleation mode particles for some 4WCFS formulations. Overall, 4WCFS show promise for significantly reducing diesel emissions into the atmosphere in a single control device. © 2013 American Chemical Society.

卫星高度计资料在海洋潮汐研究中的应用

本文依据收集到的392个地面验潮站8个主要分潮（M2、S2、K1、O1、N2、K2、P1及Q1）的调和常数，对现有7个全球大洋潮汐模式的准确度进行了检验，结果显示各模式在深海区域均达到了比较高的准确度，相互之间差别也不大。经验模式GOT00和CSR4.0、同化模式NAO99、反演同化模式TPXO7.0、数值同化模式FES2002和FES2004的M2分潮均方根偏差在3 cm左右，其它分潮（S2、K1、O1、N2、K2、P1及Q1）大约在1～2 cm。本文还依据中国近海18个岛屿的调和常数对其中的5个大洋潮汐模式的准确度进行了检验，结果表明，M2分潮均方根偏差在6～14 cm，明显高于大洋部分的偏差，其中日本国家天文台的潮汐模式NAO99在中国近海的结果相对较准确。 我们利用1992年8月至2008年8月的TOPEX/POSEIDON和JASON-1(T/P-J)卫星高度计资料，对沿卫星轨道的302816个站点进行了14个分潮的潮汐调和分析，得到了全球大洋潮汐的8个主要分潮以及2个气象分潮Sa、Ssa的经验同潮图。主要结果有：（1）各分潮在卫星上升轨道与下降轨道的交叉点(约7000个)相关性分析表明：M2分潮的振幅和迟角的相关系数很高（分别为0.9965和0.9961）；S2，K1，O1和Sa分潮也有较好的相关性（相关系数为0.94～0.99）；（2）该结果与392地面个验潮站吻合较好，其中M2分潮的振幅、迟角和向量的均方根偏差分别为：1.73 cm，2.340和2.93 cm；S2，K1和O1分潮的振幅、迟角和向量的均方根偏差为1 cm左右，5.250～7.270和1.5～2.1 cm，该精度与最近几年国际上的主要大洋潮汐模式的准确度相近；（3）首次通过卫星资料获得了Sa、Ssa分潮的同潮图。周期为1年的Sa分潮与大洋105个地面站相比，振幅、迟角和向量的均方根偏差分别为1.50 cm、18.360和2.16 cm。在此基础上，进一步分析了构成Sa、Ssa气象分潮的两个主要因素（海水密度以及海面气压）在全球的分布。 在T/P-J等卫星资料无法覆盖到南大洋和北冰洋，本文利用Princeton Ocean Model（POM）进行了数值模拟，模拟结果与162个地面实测站（其中南大洋30个，北冰洋132个）的观测比较一致。基于卫星资料分析的结果和数值模拟结果合并得到了全球大洋的8个主要分潮同潮图。在此基础上通过全球潮汐能量耗散的计算得到潮能通量的分布，并得到全球M2、S2、K1和O1分潮的潮汐能量耗散率为2.431TW、0.401TW、0.336TW和0.176TW。 本文还利用卫星资料对南海潮汐进行了研究，在中国南海，获得了主要的半日潮、全日潮、四分日分潮和长周期分潮（M2，S2，N2，K2，K1，O1，P1，Q1，M4, MS4，Sa, Ssa）的经验同潮图。与南海沿岸94个地面验潮站的数据符合得比较好，M2，S2，K1及O1等4个主要分潮的平均振幅差为2～4 cm，均方根偏差分别是9～11 cm.其它4个主要分潮N2，K2，P1，Q1的平均振幅差为1～2 cm，均方根偏差为2～4 cm。此外，本文还利用卫星高度计资料潮汐分析结果沿卫星轨道进行高通滤波，分离得出中国近海的M2，S2，K1及O1分潮的内潮信息。

Plate-specific gain map correction for the improvement of detective quantum efficiency in computed radiography.

PURPOSE: The purpose of this work is to improve the noise power spectrum (NPS), and thus the detective quantum efficiency (DQE), of computed radiography (CR) images by correcting for spatial gain variations specific to individual imaging plates. CR devices have not traditionally employed gain-map corrections, unlike the case with flat-panel detectors, because of the multiplicity of plates used with each reader. The lack of gain-map correction has limited the DQE(f) at higher exposures with CR. This current work describes a feasible solution to generating plate-specific gain maps. METHODS: Ten high-exposure open field images were taken with an RQA5 spectrum, using a sixth generation CR plate suspended in air without a cassette. Image values were converted to exposure, the plates registered using fiducial dots on the plate, the ten images averaged, and then high-pass filtered to remove low frequency contributions from field inhomogeneity. A gain-map was then produced by converting all pixel values in the average into fractions with mean of one. The resultant gain-map of the plate was used to normalize subsequent single images to correct for spatial gain fluctuation. To validate performance, the normalized NPS (NNPS) for all images was calculated both with and without the gain-map correction. Variations in the quality of correction due to exposure levels, beam voltage/spectrum, CR reader used, and registration were investigated. RESULTS: The NNPS with plate-specific gain-map correction showed improvement over the noncorrected case over the range of frequencies from 0.15 to 2.5 mm(-1). At high exposure (40 mR), NNPS was 50%-90% better with gain-map correction than without. A small further improvement in NNPS was seen from carefully registering the gain-map with subsequent images using small fiducial dots, because of slight misregistration during scanning. Further improvement was seen in the NNPS from scaling the gain map about the mean to account for different beam spectra. CONCLUSIONS: This study demonstrates that a simple gain-map can be used to correct for the fixed-pattern noise in a given plate and thus improve the DQE of CR imaging. Such a method could easily be implemented by manufacturers because each plate has a unique bar code and the gain-map for all plates associated with a reader could be stored for future retrieval. These experiments indicated that an improvement in NPS (and hence, DQE) is possible, depending on exposure level, over a wide range of frequencies with this technique.

Quantization effects in the polyphase N-path IIR structure

Polyphase IIR structures have recently proven themselves very attractive for very high performance filters that can be designed using very few coefficients. This, combined with their low sensitivity to coefficient quantization in comparison to standard FIR and IIR structures, makes them very applicable for very fast filtering when implemented in fixed-point arithmetic. However, although the mathematical description is very simple, there exist a number of ways to implement such filters. In this paper, we take four of these different implementation structures, analyze the rounding noise originating from the limited arithmetic wordlength of the mathematical operators, and check the internal data growth within the structure. These analyses need to be done to ensure that the performance of the implementation matches the performance of the theoretical design. The theoretical approach that we present has been proven by the results of the fixed-point simulation done in Simulink and verified by an equivalent bit-true implementation in VHDL.

Le rôle des fréquences spatiales dans l’effet d’encombrement en identification de lettres

L’effet d’encombrement, qui nous empêche d’identifier correctement un stimulus visuel lorsqu’il est entouré de flanqueurs, est omniprésent à travers une grande variété de classes de stimuli. L’excentricité du stimulus cible ainsi que la distance cible-flanqueur constituent des facteurs fondamentaux qui modulent l’effet d’encombrement. La similarité cible-flanqueur semble également contribuer à l’ampleur de l’effet d’encombrement, selon des données obtenues avec des stimuli non-linguistiques. La présente étude a examiné ces trois facteurs en conjonction avec le contenu en fréquences spatiales des stimuli, dans une tâche d’identification de lettres. Nous avons présenté des images filtrées de lettres à des sujets non-dyslexiques exempts de troubles neurologiques, tout en manipulant l’excentricité de la cible ainsi que la similarité cible-flanqueurs (selon des matrices de confusion pré-établies). Quatre types de filtrage de fréquences spatiales ont été utilisés : passe-bas, passe-haut, à large bande et mixte (i.e. élimination des fréquences moyennes, connues comme étant optimales pour l’identification de lettres). Ces conditions étaient appariées en termes d’énergie de contraste. Les sujets devaient identifier la lettre cible le plus rapidement possible en évitant de commettre une erreur. Les résultats démontrent que la similarité cible-flanqueur amplifie l’effet d’encombrement, i.e. l’effet conjoint de distance et d’excentricité. Ceci étend les connaissances sur l’impact de la similarité sur l’encombrement à l’identification visuelle de stimuli linguistiques. De plus, la magnitude de l’effet d’encombrement est plus grande avec le filtre passe-bas, suivit du filtre mixte, du filtre passe-haut et du filtre à large bande, avec différences significatives entre les conditions consécutives. Nous concluons que : 1- les fréquences spatiales moyennes offrent une protection optimale contre l’encombrement en identification de lettres; 2- lorsque les fréquences spatiales moyennes sont absentes du stimulus, les hautes fréquences protègent contre l’encombrement alors que les basses fréquences l’amplifient, probablement par l’entremise de leur impact opposé quant la disponibilité de l’information sur les caractéristiques distinctives des stimul.

A new perspective on blocking

It is argued that the essential aspect of atmospheric blocking may be seen in the wave breaking of potential temperature (θ) on a potential vorticity (PV) surface, which may be identified with the tropopause, and the consequent reversal of the usual meridional temperature gradient of θ. A new dynamical blocking index is constructed using a meridional θ difference on a PV surface. Unlike in previous studies, the central blocking latitude about which this difference is constructed is allowed to vary with longitude. At each longitude it is determined by the latitude at which the climatological high-pass transient eddy kinetic energy is a maximum. Based on the blocking index, at each longitude local instantaneous blocking, large-scale blocking, and blocking episodes are defined. For longitudinal sectors, sector blocking and sector blocking episodes are also defined. The 5-yr annual climatologies of the three longitudinally defined blocking event frequencies and the seasonal climatologies of blocking episode frequency are shown. The climatologies all pick out the eastern North Atlantic–Europe and eastern North Pacific–western North America regions. There is evidence that Pacific blocking shifts into the western central Pacific in the summer. Sector blocking episodes of 4 days or more are shown to exhibit different persistence characteristics to shorter events, showing that blocking is not just the long timescale tail end of a distribution. The PV–θ index results for the annual average location of Pacific blocking agree with synoptic studies but disagree with modern quantitative height field–based studies. It is considered that the index used here is to be preferred anyway because of its dynamical basis. However, the longitudinal discrepancy is found to be associated with the use in the height field index studies of a central blocking latitude that is independent of longitude. In particular, the use in the North Pacific of a latitude that is suitable for the eastern North Atlantic leads to spurious categorization of blocking there. Furthermore, the PV–θ index is better able to detect Ω blocking than conventional height field indices.

Análise e projeto de superfícies seletivas de frequência com elementos pré-fractais para aplicações em comunicações indoor

In this thesis, a frequency selective surface (FSS) consists of a two-dimensional periodic structure mounted on a dielectric substrate, which is capable of selecting signals in one or more frequency bands of interest. In search of better performance, more compact dimensions, low cost manufacturing, among other characteristics, these periodic structures have been continually optimized over time. Due to its spectral characteristics, which are similar to band-stop or band-pass filters, the FSSs have been studied and used in several applications for more than four decades. The design of an FSS with a periodic structure composed by pre-fractal elements facilitates the tuning of these spatial filters and the adjustment of its electromagnetic parameters, enabling a compact design which generally has a stable frequency response and superior performance relative to its euclidean counterpart. The unique properties of geometric fractals have shown to be useful, mainly in the production of antennas and frequency selective surfaces, enabling innovative solutions and commercial applications in microwave range. In recent applications, the FSSs modify the indoor propagation environments (emerging concept called wireless building ). In this context, the use of pre-fractal elements has also shown promising results, allowing a more effective filtering of more than one frequency band with a single-layer structure. This thesis approaches the design of FSSs using pre-fractal elements based on Vicsek, Peano and teragons geometries, which act as band-stop spatial filters. The transmission properties of the periodic surfaces are analyzed to design compact and efficient devices with stable frequency responses, applicable to microwave frequency range and suitable for use in indoor communications. The results are discussed in terms of the electromagnetic effect resulting from the variation of parameters such as: fractal iteration number (or fractal level), scale factor, fractal dimension and periodicity of FSS, according the pre-fractal element applied on the surface. The analysis of the fractal dimension s influence on the resonant properties of a FSS is a new contribution in relation to researches about microwave devices that use fractal geometry. Due to its own characteristics and the geometric shape of the Peano pre-fractal elements, the reconfiguration possibility of these structures is also investigated and discussed. This thesis also approaches, the construction of efficient selective filters with new configurations of teragons pre-fractal patches, proposed to control the WLAN coverage in indoor environments by rejecting the signals in the bands of 2.4~2.5 GHz (IEEE 802.11 b) and 5.0~6.0 GHz (IEEE 802.11a). The FSSs are initially analyzed through simulations performed by commercial software s: Ansoft DesignerTM and HFSSTM. The fractal design methodology is validated by experimental characterization of the built prototypes, using alternatively, different measurement setups, with commercial horn antennas and microstrip monopoles fabricated for low cost measurements

Neural networks training using the constructivism paradigms

The Backpropagation Algorithm (BA) is the standard method for training multilayer Artificial Neural Networks (ANN), although it converges very slowly and can stop in a local minimum. We present a new method for neural network training using the BA inspired on constructivism, an alphabetization method proposed by Emilia Ferreiro based on Piaget philosophy. Simulation results show that the proposed configuration usually obtains a lower final mean square error, when compared with the standard BA and with the BA with momentum factor.

Modelagem gravimétrica da Bacia de Taubaté-vale do Rio Paraíba do Sul, leste do estado de São Paulo

This paper presents the gravity survey refinement of the Paraíba do Sul river valley, east region of São Paulo state, by acquisition of 646 gravity stations. Further than the traditional Free-Air and Bouguer corrections, it was necessary to apply the Terrain Correction due the proximity of the Mantiqueira and Mar mountain ranges. An enhanced understanding of Taubaté Basin structural framework was the main objetive of this work. As result, we present the Bouguer Gravity Map of the east region of São Paulo State and the Residual Bouguer Gravity Map generated by Upward Continuation and High-pass filtering. The 2D Gravity Modeling was applied in 4 sections, using bi-dimensional models for the bodies that produced the anomalies (Talwani Method). After integrating the gravity data with the interpretation of 11 seismic sections, it was possible to delineate the Taubate Basin structural framework, which shows an utmost sedimentary thickness of 800 m in the depocenters. It was also interpreted an ultramaphic alkaline plug in the subsurface of Caçapava city.

Electromyographic fatigue threshold of erector spinae muscle induced by a muscular endurance test in health men

Purpose: To identify the electromyographic fatigue threshold in the erector spinae muscle. Methods: Eight 19 to 24-year-old male volunteers participated in this study, in which surface electrodes were used, as well as a biological signals acquisition module (Lynx) with a sampling frequency of 1000Hz, a 1000 times gain, a 20Hz high pass filter and a 500Hz low pass filter. The test consisted of repeated isometric contractions of the erector spinae muscle in a 45° hip flexion posture, with 30%, 40%, 50% and 60% of the maximum voluntary isometric contraction. Results: A positive correlation of the RMS (root mean square) value as a function of time was found for most of the subjects with 40% (N = 6), 50% (N = 7) and 60% (N = 8) loads of the maximum voluntary isometric contraction. Conclusions: It was concluded, from this study, that the proposed protocol provides evidence, through the electromyographic signal, of the development of fatigue in the erector spinae muscle with loads of 40%, 50% and 60% of the maximum voluntary isometric contraction. The protocol also allows the electromyographic fatigue threshold and its probable applicability in the diagnosis of this phenomenon during repetitive activities to be determined.

Real-time crowd density estimation using images

This paper presents a technique for real-time crowd density estimation based on textures of crowd images. In this technique, the current image from a sequence of input images is classified into a crowd density class. Then, the classification is corrected by a low-pass filter based on the crowd density classification of the last n images of the input sequence. The technique obtained 73.89% of correct classification in a real-time application on a sequence of 9892 crowd images. Distributed processing was used in order to obtain real-time performance. © Springer-Verlag Berlin Heidelberg 2005.

Detecção de bordas em imagens digitais através de um processo de difusão anisotrópica não linear

The edges detection model by a non-linear anisotropic diffusion, consists in a mathematical model of smoothing based in Partial Differential Equation (PDE), alternative to the conventional low-pass filters. The smoothing model consists in a selective process, where homogeneous areas of the image are smoothed intensely in agreement with the temporal evolution applied to the model. The level of smoothing is related with the amount of undesired information contained in the image, i.e., the model is directly related with the optimal level of smoothing, eliminating the undesired information and keeping selectively the interest features for Cartography area. The model is primordial for cartographic applications, its function is to realize the image preprocessing without losing edges and other important details on the image, mainly airports tracks and paved roads. Experiments carried out with digital images showed that the methodology allows to obtain the features, e.g. airports tracks, with efficiency.

Utilização de equações diferenciais parciais no tratamento de imagens orbitais

Pós-graduação em Ciências Cartográficas - FCT