The Export Base Model with a Supply-Side Stimulus to the Export Sector

Paper delivered at the Western Regional Science Association Annual Conference, Sedona, Arizona, February, 2010.

Treatment of congenital aortic valve stenosis: impact of the Ross operation.

GOAL: To evaluate the impact of the Ross operation, recently (1997) introduced in our unit, for the treatment of patients with congenital aortic valve stenosis. METHODS: The period from January 1997 to December 2000 was compared with the previous 5 years (1992-96). Thirty-seven children (< 16 yrs) and 49 young adults (16-50 yrs) with congenital aortic valve stenosis underwent one of these treatments: percutaneous balloon dilatation (PBD), aortic valve commissurotomy, aortic valve replacement and the Ross operation. The Ross operation was performed in 16 patients, mean age 24.5 yrs (range 9-46 yrs) with a bicuspid stenotic aortic valve, 7/10 adults with calcifications, 2/10 adults with previous aortic valve commissurotomy, 4/6 children with aortic regurgitation following PBD, and 1/6 children who had had a previous aortic valve replacement with a prosthetic valve and aortic root enlargement. RESULTS: PBD was followed by death in two neonates (fibroelastosis); all other children survived PBD. Although there were no deaths, PBD in adults was recently abandoned, owing to unfavourable results. Aortic valve commissurotomy showed good results in children (no deaths). Aortic valve replacement, although associated with good results (no deaths), has been recently abandoned in children in favour of the Ross operation. Over a mean follow-up of 16 months (2-40 months) all patients are asymptomatic following Ross operation, with no echocardiographic evidence of aortic valve regurgitation in 10/16 patients and with trivial regurgitation in 6/16 patients. CONCLUSIONS: The approach now for children and young adults with congenital aortic valve stenosis should be as follows: (1) PBD is the first choice in neonates and infants; (2) Aortic valve commissurotomy is the first choice for children, neonates and infants after failed PBD; (3) The Ross operation is increasingly used in children after failed PBD and in young adults, even with a calcified aortic valve.

Präoperative Azidose und Entwicklung von Säuglingen nach Operation angeborener Herzfehler Preoperative acidosis and infant development following surgery for congenital heart disease.

OBJECTIVE: Prenatal diagnosis has been shown to decrease pre-operative acidosis and might prevent the occurrence of disturbed developmental outcome. The aim of this study is to evaluate parameters for acidosis and their predictive value on developmental outcome in newborns with congenital heart disease. METHODS: A total of 117 patients requiring surgery for structural heart disease in the first 31 days of life were included. Diagnosis was established either pre- or postnatally. Preoperative values of lactate, pH and base excess levels were compared to the occurrence of disturbed developmental outcome, i.e. an underperformance of more than 10% on the P90 of a standardized Dutch developmental scale. Patients were divided into groups according to blood levels of acidosis parameters, using receiver operating characteristics curves to determine cut-off values for pH, base excess and lactate. RESULTS: No significant difference in developmental outcome was found using values for pH or base excess as a cut-off level. Preoperative lactate values exceeding 6.1 mmol/l resulted in a significant increase in impaired development compared to infants with a pre-operative lactate lower than 6.1 mmol/l: 40.9% vs 15.1% in (p=0.03). CONCLUSIONS: Pre-operative lactate values might have a prognostic value on developmental outcome in newborns with congenital heart disease. The limited prognostic value of pH can be explained by the fact that pH can be easily corrected, while lactate better reflects the total oxygen debt experienced by these patients.

Long diagnostic delay in Crohn's disease is associated with complicated disease course and increased operation rate

Background: We have recently shown that the median diagnostic delay to establish Crohn's disease (CD) diagnosis (i.e. the period from first symptom onset to diagnosis) in the Swiss IBD Cohort (SIBDC) was 9 months. Seventy five percent of all CD patients were diagnosed within 24 months. The clinical impact of a long diagnostic delay on the natural history of CD is unknown. Aim: To compare the frequency and type of CD-related complications in the patient groups with long diagnostic delay (>24 months) vs. the ones diagnosed within 24 months. Methods: Retrospective analysis of data from the SIBDCS, comprising a large sample of CD patients followed in hospitals and private practices across Switzerland. The proportions of the following outcomes were compared between groups of patients diagnosed 1, 2-5, 6-10, 11-15, and ≥ 16 years ago and stratified according to the length of diagnostic delay: bowel stenoses, internal fistulas, perianal fistulas, CD-related surgical interventions, and extraintestinal manifestations. Results: Two hundred CD patients (121 female, mean age 44.9 ± 15.0 years, 38% smokers, 71% ever treated with immunomodulators and 35% with anti-TNF) with long diagnostic delay were compared to 697 CD patients (358 female, mean age 39.1 ± 14.9 years, 33% smokers, 74% ever treated with immunomodulators and 33% with anti-TNF) diagnosed within 24 months. No differences in the outcomes were observed between the two patient groups within year one after CD diagnosis. Among those diagnosed 2-5 years ago, CD patients with long diagnostic delay (n = 45) presented more frequently with internal fistulas (11.1% vs. 3.1%, p = 0.03) and bowel stenoses (28.9% vs. 15.7%, p = 0.05), and they more frequently underwent CD-related operations (15.6% vs. 5.0%, p = 0.02) compared to the patients diagnosed within 24 months (n = 159). Among those diagnosed 6-10 years ago, CD patients with long diagnostic delay (n = 48) presented more frequently with extraintestinal manifestations (60.4% vs. 34.6%, p = 0.001) than those diagnosed within 24 months (n = 182). For the patients diagnosed 11-15 years ago, no differences in outcomes were found between the long diagnostic delay group (n = 106) and the one diagnosed within 24 months (n = 32). Among those diagnosed ≥ 16 years ago, the group with long diagnostic delay (n = 71) more frequently underwent CD-related operations (63.4% vs. 46.5%, p = 0.01) compared to the group diagnosed with CD within 24 months (n = 241). Conclusions: A long diagnostic delay in CD patients is associated with a more complicated disease course and higher number of CD-related operations in the years following the diagnosis. Our results indicate that efforts should be undertaken to shorten the diagnostic delay in CD patients in order to reduce the risk for progression towards a complicated disease phenotype.

Debris Mitigation Methods for Bridge Piers, Final Repory, June 2012

Debris accumulation on bridge piers is an on-going national problem that can obstruct the waterway openings at bridges and result in significant erosion of stream banks and scour at abutments and piers. In some cases, the accumulation of debris can adversely affect the operation of the waterway opening or cause failure of the structure. In addition, removal of debris accumulation is difficult, time consuming, and expensive for maintenance programs. This research involves a literature search of publications, products, and pier design recommendations that provide a cost effective method to mitigate debris accumulation at bridges. In addition, a nationwide survey was conducted to determine the state-of-the-practice and the results are presented within.

Design and Operation of the Traffic Simulator, HR-100, 1967

Heavy traffic volumes frequently cause distress in asphalt pavements which were designed under accepted design methods and criteria. The distress appears in the form of rutting in the wheel tracks and rippling or shoving in areas where traffic accelerates or decelerates. Apparently accepted stability test methods alone do not always assure the desired service performance of asphaltic pavements under heavy traffic. The Bituminous Research Laboratory, Engineering Research Institute of Iowa State University undertook the development of a laboratory device by which the resistance of an asphalt paving mix to displacement under traffic might be evaluated, and also be used as a supplemental test to determine adequacy of design of the mix by stability procedures.

Diagnostic delay in Crohn's disease is associated with a complicated disease course and increased operation rate.

OBJECTIVES: The impact of diagnostic delay (a period from appearance of first symptoms to diagnosis) on the clinical course of Crohn's disease (CD) is unknown. We examined whether length of diagnostic delay affects disease outcomes. METHODS: Data from the Swiss IBD cohort study were analyzed. Patients were recruited from university centers (68%), regional hospitals (14%), and private practices (18%). The frequencies of occurrence of bowel stenoses, internal fistulas, perianal fistulas, and CD-related surgery (intestinal and perianal) were analyzed. RESULTS: A total of 905 CD patients (53.4% female, median age at diagnosis 26 (20-36) years) were stratified into four groups according to the quartiles of diagnostic delay (0-3, 4-9, 10-24, and ≥25 months, respectively). Median diagnostic delay was 9 (3-24) months. The frequency of immunomodulator and/or antitumor necrosis factor drug use did not differ among the four groups. The length of diagnostic delay was positively correlated with the occurrence of bowel stenosis (odds ratio (OR) 1.76, P=0.011 for delay of ≥25 months) and intestinal surgery (OR 1.76, P=0.014 for delay of 10-24 months and OR 2.03, P=0.003 for delay of ≥25 months). Disease duration was positively associated and non-ileal disease location was negatively associated with bowel stenosis (OR 1.07, P<0.001, and OR 0.41, P=0.005, respectively) and intestinal surgery (OR 1.14, P<0.001, and OR 0.23, P<0.001, respectively). CONCLUSIONS: The length of diagnostic delay is correlated with an increased risk of bowel stenosis and CD-related intestinal surgery. Efforts should be undertaken to shorten the diagnostic delay.

Long diagnostic delay in Crohn's disease is associated with complicated disease course and increased operation rate

Background and Aims: The impact of d iagnostic delay ( a period from appearance of f irst s ymptoms t o diagnosis) o n the clinical c ourse o f Crohn's disease (CD) i s unknown. W e examined whether length of d iagnostic delay a ffects d isease outcome. Methods: Data from the Swiss IBD cohort study were analyzed. T he frequencies of o ccurrence of b owel s tenoses, internal fistulas, perianal f istulas, and CD-related surgery at distinct i ntervals a fter C D diagnosis (0 - < 2 , 2 - < 6,  6 years) were c ompared f or g roups o f patients w ith different length of d iagnostic delay. Results: T he data from a g roup o f 200 CD patients with long diagnostic delay (> 24 months, 76th - 100th p ercentile) were c ompared to t hose from a group of 4 61 patients with a short diagnostic delay ( within 9 months, 1st - 50th p ercentile). T reatment r egimens d id n ot d iffer between t he two groups. Two years following diagnosis, p atients with long diagnostic delay presented more frequently with bowel stenoses (25% vs. 13.1%, p = 0.044), internal fistulas (10% vs. 2%, p = 0.018), perianal f istulas ( 20% vs. 8 .1%, p = 0.023) a nd more frequently underwent intestinal surgery (15% vs. 5 .1%, p = 0.024) t han patients with short diagnostic delay. Intestinal surgery was a lso m ore frequently p erformed  6 y ears after diagnosis in t he group with long d iagnostic delay ( 56.2% vs. 42.3%, p = 0.005) w hen compared to t he g roup with short diagnostic delay. Conclusions: L ong diagnostic delay i s associated with worse o utcome c haracterized by t he development o f increased bowel damage, n ecessitating more frequently operations in t he years following CD d iagnosis. Efforts should be undertaken to shorten the diagnostic delay.

On the diurnal soil water content dynamics during evaporation using dielectric methods

The water content dynamics in the upper soil surface during evaporation is a key element in land-atmosphere exchanges. Previous experimental studies have suggested that the soil water content increases at the depth of 5 to 15 cm below the soil surface during evapo- ration, while the layer in the immediate vicinity of the soil surface is drying. In this study, the dynamics of water content profiles exposed to solar radiative forcing was monitored at a high temporal resolution using dielectric methods both in the presence and absence of evaporation. A 4-d comparison of reported moisture content in coarse sand in covered and uncovered buckets using a commercial dielectric-based probe (70 MHz ECH2O-5TE, Decagon Devices, Pullman, WA) and the standard 1-GHz time domain reflectometry method. Both sensors reported a positive correlation between temperature and water content in the 5- to 10-cm depth, most pronounced in the morning during heating and in the afternoon during cooling. Such positive correlation might have a physical origin induced by evaporation at the surface and redistribution due to liquid water fluxes resulting from the temperature- gradient dynamics within the sand profile at those depths. Our experimental data suggest that the combined effect of surface evaporation and temperature-gradient dynamics should be considered to analyze experimental soil water profiles. Additional effects related to the frequency of operation and to protocols for temperature compensation of the dielectric sensors may also affect the probes' response during large temperature changes.

Long diagnostic delay in Crohn's disease is associated with complicated disease course and increased operation rate

Background: We have recently shown that the median diagnostic delay to establish Crohn's disease (CD) diagnosis in the Swiss IBD Cohort (SIBDC) was 9 months. Seventy five percent of all CD patients were diagnosed within 24 months. The clinical impact of a long diagnostic delay on the natural history of CD is unknown. Aim: To compare the frequency and type of CD-related complications in the patient groups with long diagnostic delay (>24 months) vs. the ones diagnosed within 24 months. Methods: Retrospective analysis of data from the SIBDCS, comprising a large sample of CD patients followed in hospitals and private practices across Switzerland. Results: Two hundred CD patients (121 female, mean age 44.9 ± 15.0 years, 38% smokers, 71% ever treated with immunomodulators and 35% with anti-TNF) with long diagnostic delay were compared to 697 CD patients (358 female, mean age 39.1 ± 14.9 years, 33% smokers, 74% ever treated with immunomodulators and 33% with anti-TNF) diagnosed within 24 months. No differences in the outcomes were observed between the two patient groups within year one after CD diagnosis. Among those diagnosed 2-5 years ago, CD patients with long diagnostic delay (n = 45) presented more frequently with internal fistulas (11.1% vs. 3.1%, p = 0.03) and bowel stenoses (28.9% vs. 15.7%, p = 0.05), and they more frequently underwent CD-related operations (15.6% vs. 5.0%, p = 0.02) compared to the patients diagnosed within 24 months (n = 159). Among those diagnosed 6-10 years ago, CD patients with long diagnostic delay (n = 48) presented more frequently with extraintestinal manifestations (60.4% vs. 34.6%, p = 0.001) than those diagnosed within 24 months (n = 182). For the patients diagnosed 11-15 years ago, no differences in outcomes were found between the long diagnostic delay group (n = 106) and the one diagnosed within 24 months (n = 32). Among those diagnosed >= 16 years ago, the group with long diagnostic delay (n = 71) more frequently underwent CD-related operations (63.4% vs. 46.5%, p = 0.01) compared to the group diagnosed with CD within 24 months (n = 241). Conclusions: A long diagnostic delay in CD patients is associated with a more complicated disease course and higher number of CD-related operations in the years following the diagnosis. Our results indicate that efforts should be undertaken to shorten the diagnostic delay in CD patients in order to reduce the risk for progression towards a complicated disease phenotype.

Electromagnetic Design of a Solid Steel Rotor Motor for Demanding Operation Environments

The solid-rotor induction motor provides a mechanically and thermally reliable solution for demanding environments where other rotor solutions are prohibited or questionable. Solid rotors, which are manufactured of single pieces of ferromagnetic material, are commonly used in motors in which the rotationspeeds exceed substantially the conventional speeds of laminated rotors with squirrel-cage. During the operation of a solid-rotor electrical machine, the rotor core forms a conductor for both the magnetic flux and the electrical current. This causes an increase in the rotor resistance and rotor leakage inductance, which essentially decreases the power factor and the efficiency of the machine. The electromagnetic problems related to the solid-rotor induction motor are mostly associated with the low performance of the rotor. Therefore, the main emphasis in this thesis is put on the solid steel rotor designs. The rotor designs studied in thisthesis are based on the fact that the rotor construction should be extremely robust and reliable to withstand the high mechanical stresses caused by the rotational velocity of the rotor. In addition, the demanding operation environment sets requirements for the applied materials because of the high temperatures and oxidizing acids, which may be present in the cooling fluid. Therefore, the solid rotors analyzed in this thesis are made of a single piece of ferromagnetic material without any additional parts, such as copper end-rings or a squirrel-cage. A pure solid rotor construction is rigid and able to keep its balance over a large speed range. It also may tolerate other environmental stresses such as corroding substances or abrasive particles. In this thesis, the main target is to improve the performance of an induction motor equipped with a solid steel rotor by traditional methods: by axial slitting of the rotor, by selecting a proper rotor core material and by coating the rotor with a high-resistive stainless ferromagnetic material. In the solid steel rotor calculation, the rotor end-effects have a significant effect on the rotor characteristics. Thus, the emphasis is also put on the comparison of different rotor endfactors. In addition, a corrective slip-dependent end-factor is proposed. The rotor designs covered in this thesis are the smooth solid rotor, the axially slitted solid rotor and the slitted rotor having a uniform ferromagnetic coating cylinder. The thesis aims at design rules for multi-megawatt machines. Typically, mega-watt-size solidrotor machines find their applications mainly in the field of electric-motor-gas-compression systems, in steam-turbine applications, and in various types of largepower pump applications, where high operational speeds are required. In this thesis, a 120 kW, 10 000 rpm solid-rotor induction motor is usedas a small-scale model for such megawatt-range solid-rotor machines. The performance of the 120 kW solid-rotor induction motors is determined by experimental measurements and finite element calculations.

Monitoring of crystallization processes by using infrared spectroscopy and multivariate methods

Väitöstutkimuksessa on tarkasteltuinfrapunaspektroskopian ja monimuuttujaisten aineistonkäsittelymenetelmien soveltamista kiteytysprosessin monitoroinnissa ja kidemäisen tuotteen analysoinnissa. Parhaillaan kiteytysprosessitutkimuksessa maailmanlaajuisesti tutkitaan intensiivisesti erilaisten mittausmenetelmien soveltamista kiteytysprosessin ilmiöidenjatkuvaan mittaamiseen niin nestefaasista kuin syntyvistä kiteistäkin. Lisäksi tuotteen karakterisointi on välttämätöntä tuotteen laadun varmistamiseksi. Erityisesti lääkeaineiden valmistuksessa kiinnostusta tämäntyyppiseen tutkimukseen edistää Yhdysvaltain elintarvike- ja lääkeaineviraston (FDA) prosessianalyyttisiintekniikoihin (PAT) liittyvä ohjeistus, jossa määritellään laajasti vaatimukset lääkeaineiden valmistuksessa ja tuotteen karakterisoinnissa tarvittaville mittauksille turvallisten valmistusprosessien takaamiseksi. Jäähdytyskiteytyson erityisesti lääketeollisuudessa paljon käytetty erotusmenetelmä kiinteän raakatuotteen puhdistuksessa. Menetelmässä puhdistettava kiinteä raaka-aine liuotetaan sopivaan liuottimeen suhteellisen korkeassa lämpötilassa. Puhdistettavan aineen liukoisuus käytettävään liuottimeen laskee lämpötilan laskiessa, joten systeemiä jäähdytettäessä liuenneen aineen konsentraatio prosessissa ylittää liukoisuuskonsentraation. Tällaiseen ylikylläiseen systeemiin pyrkii muodostumaan uusia kiteitä tai olemassa olevat kiteet kasvavat. Ylikylläisyys on yksi tärkeimmistä kidetuotteen laatuun vaikuttavista tekijöistä. Jäähdytyskiteytyksessä syntyvän tuotteen ominaisuuksiin voidaan vaikuttaa mm. liuottimen valinnalla, jäähdytyprofiililla ja sekoituksella. Lisäksi kiteytysprosessin käynnistymisvaihe eli ensimmäisten kiteiden muodostumishetki vaikuttaa tuotteen ominaisuuksiin. Kidemäisen tuotteen laatu määritellään kiteiden keskimääräisen koon, koko- ja muotojakaumansekä puhtauden perusteella. Lääketeollisuudessa on usein vaatimuksena, että tuote edustaa tiettyä polymorfimuotoa, mikä tarkoittaa molekyylien kykyä järjestäytyä kidehilassa usealla eri tavalla. Edellä mainitut ominaisuudet vaikuttavat tuotteen jatkokäsiteltävyyteen, kuten mm. suodattuvuuteen, jauhautuvuuteen ja tabletoitavuuteen. Lisäksi polymorfiamuodolla on vaikutusta moniin tuotteen käytettävyysominaisuuksiin, kuten esim. lääkeaineen liukenemisnopeuteen elimistössä. Väitöstyössä on tutkittu sulfatiatsolin jäähdytyskiteytystä käyttäen useita eri liuotinseoksia ja jäähdytysprofiileja sekä tarkasteltu näiden tekijöiden vaikutustatuotteen laatuominaisuuksiin. Infrapunaspektroskopia on laajalti kemian alan tutkimuksissa sovellettava menetelmä. Siinä mitataan tutkittavan näytteenmolekyylien värähtelyjen aiheuttamia spektrimuutoksia IR alueella. Tutkimuksessa prosessinaikaiset mittaukset toteutettiin in-situ reaktoriin sijoitettavalla uppoanturilla käyttäen vaimennettuun kokonaisheijastukseen (ATR) perustuvaa Fourier muunnettua infrapuna (FTIR) spektroskopiaa. Jauhemaiset näytteet mitattiin off-line diffuusioheijastukseen (DRIFT) perustuvalla FTIR spektroskopialla. Monimuuttujamenetelmillä (kemometria) voidaan useita satoja, jopa tuhansia muuttujia käsittävä spektridata jalostaa kvalitatiiviseksi (laadulliseksi) tai kvantitatiiviseksi (määrälliseksi) prosessia kuvaavaksi informaatioksi. Väitöstyössä tarkasteltiin laajasti erilaisten monimuuttujamenetelmien soveltamista mahdollisimman monipuolisen prosessia kuvaavan informaation saamiseksi mitatusta spektriaineistosta. Väitöstyön tuloksena on ehdotettu kalibrointirutiini liuenneen aineen konsentraation ja edelleen ylikylläisyystason mittaamiseksi kiteytysprosessin aikana. Kalibrointirutiinin kehittämiseen kuuluivat aineiston hyvyyden tarkastelumenetelmät, aineiston esikäsittelymenetelmät, varsinainen kalibrointimallinnus sekä mallin validointi. Näin saadaan reaaliaikaista informaatiota kiteytysprosessin ajavasta voimasta, mikä edelleen parantaa kyseisen prosessin tuntemusta ja hallittavuutta. Ylikylläisyystason vaikutuksia syntyvän kidetuotteen laatuun seurattiin usein kiteytyskokein. Työssä on esitetty myös monimuuttujaiseen tilastolliseen prosessinseurantaan perustuva menetelmä, jolla voidaan ennustaa spontaania primääristä ytimenmuodostumishetkeä mitatusta spektriaineistosta sekä mahdollisesti päätellä ydintymisessä syntyvä polymorfimuoto. Ehdotettua menetelmää hyödyntäen voidaan paitsi ennakoida kideytimien muodostumista myös havaita mahdolliset häiriötilanteet kiteytysprosessin alkuhetkillä. Syntyvää polymorfimuotoa ennustamalla voidaan havaita ei-toivotun polymorfin ydintyminen,ja mahdollisesti muuttaa kiteytyksen ohjausta halutun polymorfimuodon saavuttamiseksi. Monimuuttujamenetelmiä sovellettiin myös kiteytyspanosten välisen vaihtelun määrittämiseen mitatusta spektriaineistosta. Tämäntyyppisestä analyysistä saatua informaatiota voidaan hyödyntää kiteytysprosessien suunnittelussa ja optimoinnissa. Väitöstyössä testattiin IR spektroskopian ja erilaisten monimuuttujamenetelmien soveltuvuutta kidetuotteen polymorfikoostumuksen nopeaan määritykseen. Jauhemaisten näytteiden luokittelu eri polymorfeja sisältäviin näytteisiin voitiin tehdä käyttäen tarkoitukseen soveltuvia monimuuttujaisia luokittelumenetelmiä. Tämä tarjoaa nopean menetelmän jauhemaisen näytteen polymorfikoostumuksen karkeaan arviointiin, eli siihen mitä yksittäistä polymorfia kyseinen näyte pääasiassa sisältää. Varsinainen kvantitatiivinen analyysi, eli sen selvittäminen paljonko esim. painoprosentteina näyte sisältää eri polymorfeja, vaatii kaikki polymorfit kattavan fysikaalisen kalibrointisarjan, mikä voi olla puhtaiden polymorfien huonon saatavuuden takia hankalaa.

Identifying quantitative operation principles in metabolic pathways: a systematic method for searching feasible enzyme activity patterns leading to cellular adaptive responses

Background: Optimization methods allow designing changes in a system so that specific goals are attained. These techniques are fundamental for metabolic engineering. However, they are not directly applicable for investigating the evolution of metabolic adaptation to environmental changes. Although biological systems have evolved by natural selection and result in well-adapted systems, we can hardly expect that actual metabolic processes are at the theoretical optimum that could result from an optimization analysis. More likely, natural systems are to be found in a feasible region compatible with global physiological requirements. Results: We first present a new method for globally optimizing nonlinear models of metabolic pathways that are based on the Generalized Mass Action (GMA) representation. The optimization task is posed as a nonconvex nonlinear programming (NLP) problem that is solved by an outer- approximation algorithm. This method relies on solving iteratively reduced NLP slave subproblems and mixed-integer linear programming (MILP) master problems that provide valid upper and lower bounds, respectively, on the global solution to the original NLP. The capabilities of this method are illustrated through its application to the anaerobic fermentation pathway in Saccharomyces cerevisiae. We next introduce a method to identify the feasibility parametric regions that allow a system to meet a set of physiological constraints that can be represented in mathematical terms through algebraic equations. This technique is based on applying the outer-approximation based algorithm iteratively over a reduced search space in order to identify regions that contain feasible solutions to the problem and discard others in which no feasible solution exists. As an example, we characterize the feasible enzyme activity changes that are compatible with an appropriate adaptive response of yeast Saccharomyces cerevisiae to heat shock Conclusion: Our results show the utility of the suggested approach for investigating the evolution of adaptive responses to environmental changes. The proposed method can be used in other important applications such as the evaluation of parameter changes that are compatible with health and disease states.

Active sulphide mine tailings impoundments as sources of contaminated drainage: controlling factors, methods of characterisation and geochemical constraints for mitigation

Low quality mine drainage from tailings facilities persists as one of the most significant global environmental concerns related to sulphide mining. Due to the large variation in geological and environmental conditions at mine sites, universal approaches to the management of mine drainage are not always applicable. Instead, site-specific knowledge of the geochemical behaviour of waste materials is required for the design and closure of the facilities. In this thesis, tailings-derived water contamination and factors causing the pollution were investigated in two coeval active sulphide mine sites in Finland: the Hitura Ni mine and the Luikonlahti Cu-Zn-Co-Ni mine and talc processing plant. A hydrogeochemical study was performed to characterise the tailingsderived water pollution at Hitura. Geochemical changes in the Hitura tailings were evaluated with a detailed mineralogical and geochemical investigation (solid-phase speciation, acid mine drainage potential, pore water chemistry) and using a spatial assessment to identify the mechanisms of water contamination. A similar spatial investigation, applying selective extractions, was carried out in the Luikonlahti tailings area for comparative purposes (Hitura low-sulphide tailings vs. Luikonlahti sulphide-rich tailings). At both sites, hydrogeochemistry of tailings seepage waters was further characterised to examine the net results of the processes observed within the impoundments and to identify constraints for water treatment. At Luikonlahti, annual and seasonal variation in effluent quality was evaluated based on a four-year monitoring period. Observations pertinent to future assessment and mine drainage prevention from existing and future tailings facilities were presented based on the results. A combination of hydrogeochemical approaches provided a means to delineate the tailings-derived neutral mine drainage at Hitura. Tailings effluents with elevated Ni, SO₄ ^2- and Fe content had dispersed to the surrounding aquifer through a levelled-out esker and underneath the seepage collection ditches. In future mines, this could be avoided with additional basal liners in tailings impoundments where the permeability of the underlying Quaternary deposits is inadequate, and with sufficiently deep ditches. Based on the studies, extensive sulphide oxidation with subsequent metal release may already initiate during active tailings disposal. The intensity and onset of oxidation depended on e.g. the Fe sulphide content of the tailings, water saturation level, and time of exposure of fresh sulphide grains. Continuous disposal decreased sulphide weathering in the surface of low-sulphide tailings, but oxidation initiated if they were left uncovered after disposal ceased. In the sulphide-rich tailings, delayed burial of the unsaturated tailings had resulted in thick oxidized layers, despite the continuous operation. Sulphide weathering and contaminant release occurred also in the border zones. Based on the results, the prevention of sulphide oxidation should already be considered in the planning of tailings disposal, taking into account the border zones. Moreover, even lowsulphide tailings should be covered without delay after active disposal ceases. The quality of tailings effluents showed wide variation within a single impoundment and between the two different types of tailings facilities assessed. The affecting factors included source materials, the intensity of weathering of tailings and embankment materials along the seepage flow path, inputs from the process waters, the water retention time in tailings, and climatic seasonality. In addition, modifications to the tailings impoundment may markedly change the effluent quality. The wide variation in the tailings effluent quality poses challenges for treatment design. The final decision on water management requires quantification of the spatial and seasonal fluctuation at the site, taking into account changes resulting from the eventual closure of the impoundment. Overall, comprehensive hydrogeochemical mapping was deemed essential in the identification of critical contaminants and their sources at mine sites. Mineralogical analysis, selective extractions, and pore water analysis were a good combination of methods for studying the weathering of tailings and in evaluating metal mobility from the facilities. Selective extractions with visual observations and pH measurements of tailings solids were, nevertheless, adequate in describing the spatial distribution of sulphide oxidation in tailings impoundments. Seepage water chemistry provided additional data on geochemical processes in tailings and was necessary for defining constraints for water treatment.