Geologia, Geocronologia, Geoquímica e Petrogênese das Rochas Ígneas Cretácicas da Província Magmática do Cabo e suas Relações com as Unidades Sedimentares da Bacia de Pernambuco (NE do Brasil)

The area studied forms a thin NNE-directed belt situated south of Recife town (Pernambuco state), northeastern Brazil. Geologically, it comprises the Pernambuco Basin (PB), which is limited by the Pernambuco Lineament to the north, the Maragogi high to the south and the Pernambuco Alagoas massif to the west, all of them with Precambrian age. This thesis reports the results obtained for the Cabo Magmatic Province (CMP), aiming the characterization of the geology, stratigraphy, geochronology, geochemistry and petrogenesis of the Cretaceous igneous rocks presented in the PB. The PB is composed of the Cabo Formation (rift phase) at the base (polymictic conglomerates, sandstones, shales), an intermediate unit, the Estiva Formation (marbles and argillites), and, at the top, the Algodoais Formation (monomictic conglomerates, sandstones, shales). The CMP is represented by trachytes, rhyolites, pyroclastics (ignimbrites), basalts / trachy-andesites, monzonites and alkali-feldspar granite, which occur as dykes, flows, sills, laccoliths and plugs. Field observations and well descriptions show that the majority of the magmatic rocks have intrusive contacts with the Cabo Formation, although some occurrences are also suggestive of synchronism between volcanism and siliciclastic sedimentation. 40Ar/39Ar and zircon fission tracks for the magmatic rocks indicate an average age of 102 r 1 Ma for the CMP. This age represents an expressive event in the province and is detected in all igneous dated materials. It is considered as a minimum age (Albian) for the magmatic episode and the peak of the rift phase in the PB. The 40Ar/39Ar dates are about 10-14 Ma younger than published palynologic ages for this basin. Geochemically, the CMP may be divided in two major groups; i) a transitional to alkaline suite, constituted by basalts to trachy-andesites (types with fine-grained textures and phenocrysts of sanidine and plagioclase), trachytes (porphyrytic texture, with phenocrysts of sanidine and plagioclase) and monzonites; ii) a alkaline suite, highly fractionated, acidic volcano-plutonic association, formed by four subtypes (pyroclastic flows ignimbrites, fine-to medium-grained rhyolites, a high level granite, and later rhyolites). These four types are distinguished essentially by field aspects and petrographic and textural features. Compatible versus incompatible trace element concentrations and geochemical modeling based on both major and trace elements suggest the evolution through low pressure fractional crystallization for trachytes and other acidic rocks, whereas basalts / trachy-andesites and monzonites evolved by partial melting from a mantle source. Sr and Nd isotopes reveal two distinct sources for the rocks of the CMP. Concerning the acidic ones, the high initial Sr ratios (ISr = 0.7064-1.2295) and the negative HNd (-0.43 to -3.67) indicate a crustal source with mesoproterozoic model ages (TDM from 0.92 to 1.04 Ga). On the other hand, the basic to intermediate rocks have low ISr (0.7031-0.7042) and positive HNd (+1.28 to +1.98), which requires the depleted mantle as the most probable source; their model ages are in the range 0.61-0.66 Ga. However, the light rare earth enrichment of these rocks and partial melting modeling point to an incompatible-enriched lherzolitic mantle with very low quantity of garnet (1-3%). This apparent difference between geochemical and Nd isotopes may be resolved by assuming that the metasomatizing agent did not obliterate the original isotopic characteristics of the magmas. A 2 to 5% partial melting of this mantle at approximately 14 kbar and 1269oC account very well the basalts and trachy-andesites studied. By using these pressure and temperatures estimates for the generation of the basaltic to trachy-andesitic magma, it is determined a lithospheric stretching (E) of 2.5. This E value is an appropriated estimate for the sub-crustal stretching (astenospheric or the base of the lithosphere?) region under the Pernambuco Basin, the crustal stretching probably being lower. The integration of all data obtained in this thesis permits to interpret the magmatic evolution of the PB as follows; 1st) the partial melting of a garnet-bearing lherzolite generates incompatible-enriched basaltic, trachy-andesitic and monzonitic magmas; 2nd) the underplating of these basaltic magmas at the base of the continental crust triggers the partial melting of this crust, and thus originating the acidic magmas; 3rd) concomitantly with the previous stage, trachytic magmas were produced by fractionation from a monzonitic to trachy-andesitic liquid; 4th) the emplacement of the several magmas in superficial (e.g. flows) or sub-superficial (e.g. dykes, sills, domes, laccoliths) depths was almost synchronically, at about 102 r 1 Ma, and usually crosscutting the sedimentary rocks of the Cabo Formation. The presence of garnet in the lherzolitic mantle does not agree with pressures of about 14 kbar for the generation of the basaltic magma, as calculated based on chemical parameters. This can be resolved by admitting the astenospheric uplifting under the rift, which would place deep and hot material (mantle plume?) at sub-crustal depths. The generation of the magmas and their subsequent emplacement would be coupled with the crustal rifting of the PB, the border (NNE-SSW directed) and transfer (NW-SE directed) faults serving as conduits for the magma emplacement. Based on the E parameter and the integration of 40Ar/39Ar and palynologic data it is interpreted a maximum duration of 10-14 Ma for the rift phase (Cabo Formation clastic sedimentation and basic to acidic magmatism) of the PB

Anisotropia sísmica crustal na região de Cascavel - CE

This dissertation presents a study on crustal seismic anisotropy in Cascavel - CE. The earthquake data employed here are from the Seismological Laboratory at Universidade Federal do Rio Grande do Norte (UFRN) and were colected from 29 September 1997 to 05 march 1998 using six three-component digital seismographic stations. In general, the cause of the observed seismic anisotropy in many regions of the world is interpreted in terms of fluid-filled stress aligned microcracks in the rockmass (EDA). In other words, the polarisation direction of the faster shear-wave splitting is parallel to SHmax. However, other researches on seismic anisotropy carried out in NE Brazil have shown a remarkable consistency of the faster shear-wave polarisation direction with the direction of the Precambrian fabric. The present work is another case study that is used to investigate this issue. In order to map the Precambrian fabric we used aeromagnetic data, since the study area is mostly covered with sediments (up to 50m thick) and in-situ field mapping would be very difficult to be carried out. According to the results from the present research, the observations of the faster shear-wave polarisation directions in two seismographic stations in Cascavel region are best explained in the framework of EDA. For the remaining two stations, the observed anisotropy may have two interpretions: (i) - 90_ flips of the direction of polarisation of the faster shear-wave, since that the event-to-station ray path would be through the fracture zone and hence would travel under a higher pore pressure and (ii) - the observed seismic anisotropy would agree with the direction on the ductile Precambrian fabric

Estimativa de espessura crustal na Província Borborema (NE/Brasil) através de função do recpetor

Crustal thickness and VP/VS estimates are essential to the studies of subsurface geological structures and also to the understanding of the regional tectonic evolution of a given area. In this dissertation, we use the Langston´s (1979) Receiver Function Method using teleseismic events reaching the seismographic station with angles close to the vertical. In this method, the information of the geologic structures close to the station is isolated so that effects related to the instrument response and source mechanics are not present. The resulting time series obtained after the deconvolution between horizontal components contains the larger amplitude referring to the P arrival, followed by smaller arrival caused by the reverberation and conversion of the P-wave at the base of the crust. We also used the HK-Stacking after Zhu & Kanamori (2000) to obtain crustal thickness and Vp/VS estimates. This method works stacking receiver functions so that the best estimates of crustal thickness and Vp/VS are found when the direct P, the Ps wave and the first multiple are coherently stacked. We used five broadband seismographic stations distributed over the Borborema Province, NE Brazil. Crustal thickness and Vp/VS estimates are consistent with the crust-mantle interface obtained using gravity data. We also identified crutal thickening in the NW portion of the province, close to Sobral/CE. Towards the center-north portion of the province, there is an evident crustal thinning which coincides with a geological feature consisting of an alignment of sedimentary basins known as the Cariris-Potiguar trend. Towards the NE portion of the province, in Solânea/PB and Agrestina/PE regions, occurs a crustal thickening and a systematic increase in the VP/VS values which suggest the presence of mafic rocks in the lower crust also consistent with the hypothesis of underplating in the region

Mecanismos de alojamento de magmas granitóides :exemplo do plúton de Japi(RN)

This dissertation describes the igneous suites of the Japi granitoid pluton, intrusive in the Paleoproterozoic gneiss-migmatite complex of the eastern domain of the Seridó Belt, northeastern Brazil. Field relations show that the pluton is affected by strong deformation associated to the Brasiliano orogeny (known as the D3 phase) , with a NW-trending extensionalleft-hand senestral shear zone (the Japi Shear Zone, JSZ) bordering the intrusive body to the west. Four plutonic suites are found in the main pluton and as satellyte intrusions, besides Iate pegmatite and pink leucogranites. An alkaline granitoid suite, dominated by syenogranites bearing sodic augite (and subordinate hornblende), define a main elliptical intrusion. In its northern part, this intrusion is made up by concentric sheets, contrasting with a smaller rounded stock to the south. These granites display a pervasive solid-state S>L fabric developed under high T conditions, characterized by plastic deformation of quartz and feldspar. It is especially, developed along the border of the pluton, with inward dips. A regular magmatic layering is present sometimes, parallel to the tectonic foliation. The syntectonic emplacement as regards to the Brasiliano (D3) event is indicated by the common occurrence of dykes and sheets along transtensional or extensional sites of the major structure. Field relations attest to the early emplacement of the alkaline granites as regards to the other suites. A basic-to-intermediate suite occurs as a western satellyte body and occupying the southern tail of the main alkaline pluton. It comprises a wide variety of compositional terms, including primitive gabbros and gabbro-norites, differentiated to monzonitic intermediate facies containing amphibole and biotite as their main mafic phases. These rocks display transitional high-K calc-alkaline to shoshonitic affinities. Porphyritic monzogranite suítes commonly occur as dykes and minor intrusives, isolated or associated with the basic-tointermediate rocks. In the latter case, magma mingling and mixing features attest that these are contemporaneous igneous suites. These granites show K-feldspar phenocrysts and a hornblende+biotite+titanite assemblage, displaying subalkaline/monzonitic geochemical affinities. Both suites exhibit SL magmatic fabrics overprinting or transitional to solid-state D3 deformation related to the JSI. Chemical data clearly show that they are related to different parental magmas. Finally, a microgranite suite occurs along a few topographic ridges paralell to the JSI. It comprises dominantly granodiorites with a mineralogy similar to the one of the porphyritic granitoids. However, discriminant diagrams show their distinct calc-alkaline affinity. The granodiorites display an essencially magmatic fabric, even though an incipient D3 solid-state structure may be developed along the JSI. Intrusion relationships with the previous suites, as well as regards to the D3 structures, point to their Iate emplacement. All these suites are intrusive in a Paleoproterozoic, high-grade gneiss-migmatite complex affected by two previous deformation phases (D1, D2). The fabrics associated with these earlier events are folded and overprinted by the younger D3 structures along the JSZ. The younger deformation is characterized by NE-dipping foliations and N/NE-plunging stretching lineations. In the JSZ northern termination the foliation acquires an ENE orientation, containing a stretching lineation plunging to the south. Symmetric kinematic cri teria developed at this site confirms the transpressional termination of the JSZ, as also shown by orthorrombic quartz c-axis patterns. E-W-trending d extra I shear zones developed in the central part of the JSZ are interpreted as antithetic structures associated to the transtensional deformation along the JSZ. This is consistent with its extensional-transcurrent kinematics and a flat-and-ramp geometry at depth, as shown by gravimetric data. The lateral displacement of the negative residual Bouguer anomalies, as regards to the main outcropping alkaline pluton, may be modelized by other deeper-seated granite bodies. Based on numerical modelling it was possible to infer two distinct intrusion styles for the alkaline pluton. The calculated model values are consistent with an emplacement by sheeting for the northern body, as already suggested by satellyte imagery and field mapping. On the other hand, the results point to a transition towards a diapir-related style associated to the smaller. southern stock. This difference in intrusion styles may relate to intensity variations and transtensional sites of the shear deformation along the JSZ. Trace element and Sr and Nd isotopes of the alkaline granites are compatible with their derivation trom a more basic crustal source, as compared to the presently outcropping highgrade gneisses, with participation (or alternatively dominated by) of an enriched lithospheric mantle component. Like other igneous suites in the Seridó Belt, the high LlL contents and fractionated REE patterns of the basic rocks also point to an enriched mantle as the source for this kind of magmatism. Geochemical and isotope data are compatible with a lower crustal origin for the porphyritic granites. On the basis of the strong control of the JSZ on the emplacement of lower crustal (porphyritic and alkaline granites) or lithospheric mantle (basic rocks, alkaline granites or a component of them) magmas, one may infer a deep root for this structure, bearing an important role in magma extraction, transport and emplacement in the Japi region, eastern domain of the Seridó Belt

The Serido Group of NE Brazil, a late Neoproterozoic pre- to syn-collisional basin in West Gondwana: insights from SHRIMP U-Pb detrital zircon ages and Sm-Nd crustal residence (T-DM) ages

The Serido Group is a deformed and metamorphosed metasedimentary sequence that overlies early Paleoproterozoic to Archean basement of the Rio Grande do Norte domain in the Borborema Province of NE Brazil. The age of the Serido Group has been disputed over the past two decades, with preferred sedimentation ages being either Paleoproterozoic or Neoproterozoic. Most samples of the Serido Formation, the upper part of the Serido Group, have Sm-Nd T-DM ages between 1200 and 1600 Ma. Most samples of the Jucurutu Formation, the lower part of the Serido Group, have T-DM ages ranging from 1500 to 1600 Ma; some basal units have T-DM ages as old as 2600 Ma, reflecting proximal basement. Thus, based on Sm-Nd data, most, if not all, of the Serido Group was deposited after 1600 Ma and upper parts must be younger than 1200 Ma.Cathodoluminescence photos of detrital zircons show very small to no overgrowths produced during ca. 600 Ma Brasiliano deformation and metamorphism, so that SHRIMP and isotope dilution U-Pb ages must represent crystallization ages of the detrital zircons. Zircons from meta-arkose near the base of the Jucurutu Formation yield two groups of ages: ca. 2200 Ma and ca. 1800 Ma. In contrast, zircons from a metasedimentary gneiss higher in the Jucurutu Formation yield much younger ages, with clusters at ca. 1000 Ma and ca. 650 Ma. Zircons from metasedimentary and metatuffaceous units in the Serido Formation also yield ages primarily between 1000 and 650 Ma, with clusters at 950-1000, 800, 750, and 650 Ma. Thus, most, if not all, of the Serido Group must be younger than 650 Ma. Because these units were deformed and metamorphosed in the ca. 600 Ma Brasiliano fold belt during assembly of West Gondwana, deposition probably occurred ca. 610-650 Ma, soon after crystallization of the youngest population of zircons and before or during the onset of Brasiliano deformation.The Serido Group was deposited upon Paleoproterozoic basement in a basin receiving detritus from a variety of sources. The Jucurutu Formation includes some basal volcanic rocks and initially received detritus from proximal 2.2-2.0 Ga (Transamazonian) to late Paleoproterozoic (1.8-1.7 Ga) basement. Provenance for the upper Jucurutu Formation and all of the Serido Formation was dominated by more distal and younger sources ranging in age from 1000 to 650 Ma. We suggest that the Serido basin may have developed as the result of late Neoproterozoic extension of a pre-existing continental basement, with formation of small marine basins that were largely floored by cratonic basement (subjacent oceanic crust has not yet been found). Immature sediment was initially derived from surrounding land; as the basin evolved much of the detritus probably came from highlands to the south (present coordinates). Alternatively, if the Patos shear zone is a major terrane boundary, the basin may have formed as an early collisional foredeep associated with south-dipping subduction. In any case, within 30 million years the region was compressed, deformed, and metamorphosed during final assembly of West Gondwana and formation of the Brasiliano-Pan African fold belts. (C) 2003 Elsevier B.V. All rights reserved.

Gravity Data and Crustal Structure of North-Central Brazil

The Bouguer gravity anomaly of the northwest Ceará state in north-central Brazil was separated into its regional and residual components which were interpreted separately. By assuming that the sources of the regional anomalies are the depth variations of the crust-mantle interface, the mapping of these variations permited identifying crustal thickening zones which may be related to regional structures. The gravity residual sources coincide with occurrences of high-grade rocks (granulites) associated to medium-grade gneisses. Besides, the major strike-slip zones present significant signatures in the gravity data. This geophysical interpretation is compatible with the interpretation that the tectonic framework of the area is related to two crustal blocks conjoined by an A-type suture. The blocks are displaced along an oblique ramp with dextral movement, which played an important role in uplifting high-grade rocks from the lower crust to upper crustal levels. The suture zone corresponds to an imbricated compressive system dipping to the east and complicated by late dextral strike-slip shear zones.

Evidence for 2.35 to 2.30 Ga juvenile crustal growth in the northwest Borborema Province, NE Brazil

The c. 600 Ma Brasiliano Borborema Province of NE Brazil comprises a complex collage of Precambrian crustal blocks cut by a series of continental-scale shear zones. The predominant basement rocks in the province are 2.1-2.0 Ga Transamazonian gneisses of both juvenile and reworked nature. U-Pb zircon and Sm-Nd whole-rock studies of tonalite-trondhjemite-granodiorite basement gneisses in the NW Ceará or Médio Coreaú domain in the northwestern part of the Borborema Province indicate that this represents a continental fragment formed by 2.35-2.30 Ga juvenile crust. This block has no apparent genetic affinity with any other basement gneisses in the Borborema Province, and it does not represent the tectonized margin of the c. 2.1-2.0 Ga São Luis Craton to the NW. The petrological and geochemical characteristics, as well as the Nd-isotopic signatures of these gneisses, are consistent with their genesis in an island arc setting. This finding documents a period of crustal growth during a period of the Earth's history which is known for its tectonic quiescence and paucity of crust formation. © Geological Society of London 2009.

Crustal growth in the 3.4-2.7Ga São José de Campestre Massif, Borborema Province, NE Brazil

The Archean (3.45-2.70Ga) rocks of the São José do Campestre Massif (SJCM) in the Borborema Province (NE Brazil) make up a small area (~6000km2) and are composed of granitoids and metasupracrustal rocks that define a complex magmatic and deformational history. The massif provides the opportunity to study mantle- and crustal-derived magmas generated since the Palaeoarchean. The orthogneisses of the SJCM are composed of: (1) tonalite to granodiorite with diorite enclaves (Bom Jesus gneiss, 3412±8Ma; TDM Nd model ages from 4.1 to 3.5Ga and negative epsilon Nd values); (2) biotite and ferroan-diopside monzogranite (Presidente Juscelino complex, 3356±21Ma and 3251±44Ma; TDM model ages range from 4.1 to 3.4Ga and epsilon Nd values that are slightly positive to negative); (3) hornblende tonalite to granodiorite (Brejinho complex, 3333±77Ma and 3187±8Ma; dominantly positive epsilon Nd values and TDM ages from 3.6 to 3.2Ga); (4) biotite monzogranite (São Pedro do Potengi gneiss, 3120±22Ma; TDM =3.5Ga; negative epsilon Nd value); (5) ferroan-diopside-grossular anorthosite and metagabbro (Senador Elói de Souza complex, 3033±3Ma); and (6) quartz diorite to syenogranite (São José do Campestre complex; 2685±9Ma and 2655±4Ma; negative epsilon Nd values and TDM ages from 3.9 to 3.3Ga). The orthogneisses are subalkaline to faintly alkaline, magnesian to ferroan, M- and I-type granitoids that follow either the K-enrichment or the trondhjemite trends. Each group has a subset with REE characteristics similar to Archean TTG and another that is analogous to Phanerozoic granitoids. They have negative Ta-Nb and Ti anomalies and have trace element contents of granitoids from subduction zones. Geochemical and Nd isotope data suggest that subducted oceanic crust and a depleted and metasomatised mantle wedge both acted as the magma sources. We propose a convergent tectonic model in which hybridisation of the upper mantle occurs through interactions with adakitic or trondhjemitic melts and recycling of earlier crust. The results imply that both the subducted oceanic crust and the mantle wedge played major roles in continent formation throughout successive episodes of arc accretion in Palaeo- and Mesoarchean times. The Archean rocks of the SJCM shares some similarities with the Pilbara, Kaapvaal, West African, and São Francisco cratons. However, the most reliable comparisons with the SJCM are with the neighbouring basement of the Nigeria and Cameroon shields. © 2012 Elsevier B.V.

Uma nova abordagem para interpretação de anomalias gravimétricas regionais e residuais aplicada ao estudo da organização crustal: exemplo da Região Norte do Piauí e Noroeste do Ceará

A interpretação de anomalias gravimétricas é de grande importância no estudo de feições geológicas que ocorrem na crosta terrestre. Esta interpretação é, no entanto, dificultada pelo fato das anomalias gravimétricas serem resultantes da soma total dos efeitos produzidos por todos os contrastes de densidades de subsuperfície. Desse modo, com o intuito de separar efeitos de feições mais profundas de efeitos de feições mais rasas, bem como a caracterização da geometria desses dois conjuntos de feições, apresentamos um método de separação das componentes regional e residual do campo e a subsequente interpretação de cada componente. A separação regional-residual de dados gravimétricos é efetuada através da aproximação do campo regional por um polinômio ajustado ao campo observado por um método robusto. Este método é iterativo e usa como aproximação inicial a solução obtida através do ajuste polinomial pelo método dos mínimos quadrados. O método empregado minimiza a influência de observações contendo forte contribuição do campo residual no ajuste do campo regional. A componente regional obtida a partir da separação regional-residual é transformada em um mapa de distâncias verticais em relação a um nível de referência. Esta transformação compreende duas etapas. A primeira consiste na obtenção da continuação para baixo da componente regional, que é pressuposta ser causada por uma interface suave separando dois meios homogêneos, representando a interface crosta-manto, cujo contraste de densidade é supostamente conhecido. A segunda consiste na transformação do mapa de continuação para baixo em um mapa de distâncias verticais entre o nível de continuação (tomado como nível de referência) e a interface. Este método apresenta duas dificuldades. A primeira está ligada à instabilidade, havendo portanto a necessidade do emprego de um estabilizador o que acarreta a perda de resolução das feições que se desejam mapear. A segunda, inerente ao método gravimétrico, consiste na impossibilidade da determinação das profundidades absolutas da interface em cada ponto, bastando entretanto o conhecimento da profundidade absoluta em um ponto, através de informação independente, para que todas as outras profundidades absolutas sejam conhecidas. A componente residual obtida a partir da separação regional-residual é transformada em um mapa de contrastes de densidade aparente. Esta transformação consiste no cálculo do contraste de densidade de várias fontes prismáticas através de uma inversão linear pressupondo que as fontes reais estejam das a uma placa horizontal, com contrastes de densidade variando apenas nas direções horizontais. O desempenho do método de separação regional-residual apresentado foi avaliado, através de testes empregando dados sintéticos, fornecendo resultados superiores em relação aos métodos dos mínimos quadrados e da análise espectral. O método de interpretação da componente regional teve seu desempenho avaliado em testes com dados sintéticos onde foram produzidos mapeamentos de interfaces bem próximas das estruturas reais. O limite de resolução das feições que se desejam mapear depende não só do grau do polinômio ajustante, como também da própria limitação inerente ao método gravimétrico. Na interpretação da componente residual é necessário que se postule ou tenha informação a priori sobre a profundidade do topo e espessura da placa onde as fontes estão supostamente confinadas. No entanto, a aplicação do método em dados sintéticos, produziu estimativas razoáveis para os limites laterais das fontes, mesmo na presença de fontes interferentes, e pressupondo-se valores para profundidade do topo e espessura da placa, diferentes dos valores verdadeiros. A ambiguidade envolvendo profundidade do topo, espessura e densidade pode ser visualizada através de gráficos de valores de densidade aparente contra profundidade do topo presumida para a placa para vários valores postulados para a espessura da placa. Estes mesmos gráficos permitem, pelo aspecto das curvas, a elaboração de uma interpretação semi-quantitativa das profundidades das fontes reais. A seqüência dos três métodos desenvolvidos neste trabalho foi aplicada a dados gravimétricos da região norte do Piauí e noroeste do Ceará levando a um modelo de organização crustal que compreende espessamentos e adelgaçamentos crustais associados a um evento compressivo que possibilitou a colocação de rochas densas da base da crosta a profundidades rasas. Este modelo ê compatível com os dados geológicos de superfície. É ainda sugerida a continuidade, por mais 200 km em direção a sudoeste, do Cinturão de Cisalhamento Noroeste do Ceará por sob os sedimentos da Bacia do Parnaíba, com base nas evidências fornecidas pela interpretação da anomalia residual. Embora esta seqüência de métodos tenha sido desenvolvida com vistas ao estudo de feições crustais de porte continental, ela também pode ser aplicada ao estudo de feições mais localizadas como por exemplo no mapeamento do relevo do embasamento de/bacias sedimentares onde os sedimentos são cortados por rochas intrusivas mais densas.

Batólito Guaporeí: uma extensão do Complexo Granitoide Pensamiento em Mato Grosso, SW do Cráton Amazônico

O Batólito Guaporeí é um corpo de aproximadamente 240 km² alongado segundo a direção NW, localizado na região de Vila Bela da Santíssima Trindade, estado de Mato Grosso. Situa-se nos domínios da Província Rondoniana-San Ignácio, no Terreno Paraguá, na porção meridional do Cráton Amazônico. É formado por monzogranitos e, subordinadamente, granodioritos, quartzo-monzonitos e sienogranitos, caracterizados por granulação grossa e textura, em geral, porfirítica a porfiroclástica. Possui biotita como mineral máfico primário, por vezes, associada a anfibólio, e encontra-se metamorfizado na fácies xisto verde, exibindo estrutura milonítica, em estreitas zonas de cisalhamento. Evidências geoquímicas indicam que essas rochas derivam de um magma cálcio-alcalino de alto potássio a shoshonítico, metaluminoso a levemente peraluminoso evoluído por cristalização fracionada associada à assimilação crustal, possivelmente gerado em ambiente de arco continental. Duas fases de deformação relacionadas à Orogenia San Ignácio, caracterizadas pelo estiramento e alinhamento mineral evidenciadas pelas foliações S₁ e S₂, foram identificadas nestas rochas. Foi obtida pelo método de evaporação de Pb em zircão uma idade de 1.314 ± 3 Ma, interpretada como idade de cristalização do corpo granítico. Dados Sm-Nd em rocha total indicam idade modelo T_DM em torno de 1,7 Ga e valor negativo para _{εNd (t = 1,3)} (-14), corroborando a hipótese de envolvimento crustal na gênese do magma. Os resultados obtidos apontam semelhanças entre essas rochas e aquelas de região adjacente em território boliviano, sugerindo que o Granito Guaporeí representa uma extensão do Complexo Granitoide Pensamiento.

Geocronologia e evolução crustal da área do depósito de Cu-Au Gameleira, Província Mineral de Carajás (Pará), Brasil

O depósito de Cu-Au Gameleira está hospedado nas rochas do Grupo Igarapé Pojuca, pertencente ao Supergrupo Itacaiúnas, Província Mineral de Carajás, SE do Cráton Amazônico. Esse grupo está representado principalmente por rochas metavulcânicas máficas (RMV), anfibolitos, biotita xistos, formações ferríferas e/ou hidrotermalitos, cortadas por rochas intrusivas máficas (RIM), bem como por granitos arqueanos (2,56 Ga, Granito Deformado Itacaiúnas) e paleoproterozóicos (1,87 - 1,58 Ga, Granito Pojuca e Leucogranito do Gameleira). Cristais de zircão de um saprolito (2615 ± 10 Ma e 2683 ± 7 Ma) e de uma amostra de RIM (2705 ± 2 Ma), mostraram ser contemporâneos aos dos gabros do depósito Águas Claras. Datações Pb-Pb em rocha total e calcopirita de RMV indicaram idades de 2245 ± 29 Ma e 2419 ± 12 Ma, respectivamente, enquanto lixiviados de calcopirita indicaram idades de 2217 ± 19 Ma e 2180 ± 84 Ma. Essas idades são interpretadas como rejuvenescimento parcial provocado pelas intrusões graníticas proterozóicas (1,58 e 1,87 Ga) ou pelas reativações tectônicas associadas aos Sistemas Transcorrentes Carajás e Cinzento, ou total, provocada pelas últimas. As idades-modelo T_DM de 3,12 e 3,33 Ga para as RMV e RIM e os valores de _εNd (t) de -0,89 a -3,26 sugerem contribuição continental de rochas mais antigas e magmas gerados possivelmente em um ambiente de rifte continental ou de margem continental ativa.

Aspectos texturais do magmatismo e tramas da tectônica impostas ao Granito Chaval na Zona de Cisalhamento Santa Rosa, extremo Noroeste da Província Borborema

A região Noroeste da Província Borborema apresenta uma diversidade de corpos graníticos de natureza e evolução tectônica diversificadas, do Paleoproterozoico ao Paleozoico, com maior incidência relacionada ao Neoproterozoico e alojamento em diferentes fases da orogenia Brasiliana. Um desses exemplos é o Granito Chaval, que representa um batólito aflorante próximo à costa Atlântica do Ceará e Piauí, intrusivo em ortognaisses do Complexo Granja e supracrustais do Grupo Martinópole. Ele é, em parte, coberto por depósitos cenozoicos costeiros e rochas sedimentares paleozoicas da Bacia do Parnaíba. O Granito Chaval tem como característica marcante a textura porfirítica, destacando-se megacristais de microclina, em sienogranitos e monzogranitos, e outras feições texturais/estruturais de origem magmática, Essas permitiram interpretar sua evolução como de alojamento relativamente raso do plúton, conduzido por processos de cristalização fracionada, mistura de magmas com fluxo magmático e ação gravitacional em função da diferença de densidade do magma, levando à flutuação e ascensão de megacristais de microclina no magma residual, com alojamento de leucogranitos e pegmatitos nos estágios finais da evolução deste plutonismo. Por outro lado, em toda a metade Leste do plúton, encontra-se um rico acervo de estruturas tectógenas de cisalhamento, relacionada à implantação da Zona de Cisalhamento Transcorrente Santa Rosa, que levou a transformações tectonometamórficas superpostas às feições magmáticas, as quais atingiram condições metamórficas máximas na fácies anfibolito baixo. Cartograficamente, foram individualizados três domínios estruturais em que estão presentes uma gama de variações petroestruturais do Granito Chaval, sejam feições texturais/estruturais ígneas e tectônicas. As rochas plutônicas foram deformadas e modificadas progressivamente à medida que se dirige para Leste, no qual as rochas mudam-se para tonalidades mais escuras do cinza e os processos de cominuição e recristalização dinâmica reduzem, progressivamente, a granulação grossa desses granitos bem como o tamanho dos fenocristais para dimensões mais finas, mantendo-se suas características porfiroides. Desse modo, a trama milonítica se torna evidente, acentuando-se ao atingir a porção principal da Zona de Cisalhamento Transcorrente Santa Rosa. Como principais feições estruturais, destacam-se extinção ondulante forte; encurvamento e segmentação de cristais; geminação de deformação; rotação de cristais; microbudinagem; foliação anastomosada, inclusive S-C; lineação de estiramento; formas amendoadas de porfiroclastos, fitas e folhas de quartzo e recristalização. Os produtos desses processos de cisalhamento resultam na formação de protomilonitos, milonitos e ultramilonitos. Essas faixas miloníticas representam os locais de maior concentração da deformação, por isso é possível acompanhar progressivamente suas modificações texturais e mineralógicas, configurando uma sequência clássica de deformação progressiva heterogênea, por cisalhamento simples, em condições frágil-dúctil e dúctil. O alojamento do Granito Chaval aconteceu no final do Criogeniano (aproximadamente 630 Ma) e pode ser interpretado como magmatismo sin a tardi-tectônico em relação ao evento Brasiliano. O processo de cisalhamento que gerou a Zona de Cisalhamento Transcorrente Santa Rosa se formou nos incrementos finais da deformação de uma colisão continental em um sistema de cavalgamento oblíquo, em que se edificou o Cinturão de Cisalhamento Noroeste do Ceará, devido ao extravasamento lateral de massas crustais em fluxo dúctil acontecido no final da orogenia Brasiliana no Noroeste da Província Borborema.

Comportamento fractal de superfície da zona de estiramento em aço 300M temperado

Fracture surfaces are the fracture process marks, taht it is characterized by energy release guieded by failure mode. The fracture toughness express this energy em stress and strain terms in pre-cracked samples. The strectch zone is the characteristic region forms by the transition of fatigue fracture and final fracture and it width demonstrate the relation with failure energy release.The quantitative fractography is a broadly tool uses in failure surfaces characterization that it can point to a material’s aspect or a fracture process. The image processing works like an investigation tool, guinding a lot of studies in this area. In order to evaluate the characterization effectivity and it respectivity studies, it used 300M steel that it was thermal treated by an aeronautical process known and it characterized by tensile test and energy dispersive spectroscopy (EDS). The tensile test of this material, made by ASTM E8, allowed the head treatment effectivity confirmation, beyond of mechanics porperties determination. The EDS confirmed the material composition, beyond of base the discussion about fracture mechanism presence. The fracture toughness test has also made, that it works to obtain the fracture surfeaces studies below self-similarity and self-affinity approaches. In front of all the exposed it was possible to conclude that the fractal dimension works like a study parameter of fracture process, allowinf the relation of their values with changes in thickness, which interferes directly in material’s behaviour in fracture toughness approach

Correlações entre zona de estiramento e tenacidade à fratura para aço 15-5PH

This work includes a study on the stretch zone and the influence of the toughness conditions at fracture in size and appearance. It was done a literature review about material properties, fracture mechanics concepts, definitions and formation of stretch zone, importance of tenacity for structural calculation, methods and standards to measure the toughness of metallic material fracture and presents the method used in microscopy. After the literature review were carried out identification and measurements of stretch zones of proof bodies were made through confocal optical microscopy and then analyzed the results in order to find relationships between the values obtained with the theory

Correlações entre zona de estiramento e tenacidade à fratura para aço 15-5PH

This work includes a study on the stretch zone and the influence of the toughness conditions at fracture in size and appearance. It was done a literature review about material properties, fracture mechanics concepts, definitions and formation of stretch zone, importance of tenacity for structural calculation, methods and standards to measure the toughness of metallic material fracture and presents the method used in microscopy. After the literature review were carried out identification and measurements of stretch zones of proof bodies were made through confocal optical microscopy and then analyzed the results in order to find relationships between the values obtained with the theory