Microfluidic electronic tongue

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Performance of an electronic tongue during monitoring 2-rnethylisoborneol and geosmin in water samples

2-Methylisoborneol (MIB) and geosmin (GSM) are sub products from algae decomposition and, depending on their concentration, can be toxic: otherwise, they give unpleasant taste and odor to water. For water treatment companies it is important to constantly monitor their presence in the distributed water and avoid further costumer complaints. Lower-cost and easy-to-read instrumentation would be very promising in this regard. In this study, we evaluate the potentiality of an electronic tongue (ET) system based on non-specific polymeric sensors and impedance measurements in monitoring MIB and GSM in water samples. Principal component analysis (PCA) applied to the generated data matrix indicated that this ET was capable to perform with remarkable reproducibility the discrimination of these two contaminants in either distilled or tap water, in concentrations as low as 25 ng L-1. Nonetheless, this analysis methodology was rather qualitative and laborious, and the outputs it provided were greatly subjective. Also, data analysis based on PCA severely restricts automation of the measuring system or its use by non-specialized operators. To circumvent these drawbacks, a fuzzy controller was designed to quantitatively perform sample classification while providing outputs in simpler data charts. For instance, the ET along with the referred fuzzy controller performed with a 100% hit rate the quantification of MIB and GSM samples in distilled and tap water. The hit rate could be read directly from the plot. The lower cost of these polymeric sensors allied to the especial features of the fuzzy controller (easiness on programming and numerical outputs) provided initial requirements for developing an automated ET system to monitor odorant species in water production and distribution. (C) 2012 Elsevier B.V. All rights reserved.

Timely follow-up of abnormal diagnostic imaging test results in an outpatient setting: are electronic medical records achieving their potential?

BACKGROUND: Given the fragmentation of outpatient care, timely follow-up of abnormal diagnostic imaging results remains a challenge. We hypothesized that an electronic medical record (EMR) that facilitates the transmission and availability of critical imaging results through either automated notification (alerting) or direct access to the primary report would eliminate this problem. METHODS: We studied critical imaging alert notifications in the outpatient setting of a tertiary care Department of Veterans Affairs facility from November 2007 to June 2008. Tracking software determined whether the alert was acknowledged (ie, health care practitioner/provider [HCP] opened the message for viewing) within 2 weeks of transmission; acknowledged alerts were considered read. We reviewed medical records and contacted HCPs to determine timely follow-up actions (eg, ordering a follow-up test or consultation) within 4 weeks of transmission. Multivariable logistic regression models accounting for clustering effect by HCPs analyzed predictors for 2 outcomes: lack of acknowledgment and lack of timely follow-up. RESULTS: Of 123 638 studies (including radiographs, computed tomographic scans, ultrasonograms, magnetic resonance images, and mammograms), 1196 images (0.97%) generated alerts; 217 (18.1%) of these were unacknowledged. Alerts had a higher risk of being unacknowledged when the ordering HCPs were trainees (odds ratio [OR], 5.58; 95% confidence interval [CI], 2.86-10.89) and when dual-alert (>1 HCP alerted) as opposed to single-alert communication was used (OR, 2.02; 95% CI, 1.22-3.36). Timely follow-up was lacking in 92 (7.7% of all alerts) and was similar for acknowledged and unacknowledged alerts (7.3% vs 9.7%; P = .22). Risk for lack of timely follow-up was higher with dual-alert communication (OR, 1.99; 95% CI, 1.06-3.48) but lower when additional verbal communication was used by the radiologist (OR, 0.12; 95% CI, 0.04-0.38). Nearly all abnormal results lacking timely follow-up at 4 weeks were eventually found to have measurable clinical impact in terms of further diagnostic testing or treatment. CONCLUSIONS: Critical imaging results may not receive timely follow-up actions even when HCPs receive and read results in an advanced, integrated electronic medical record system. A multidisciplinary approach is needed to improve patient safety in this area.

Linear system solvers for parallel computers /

Includes bibliographical references.

Control system components /

Mode of access: Internet.

Electronic Database Support Systems for Strategic Planning Activities in the Hospitality Industry

An electronic database support system for strategic planning activities can be built by providing conceptual and system specific information. The design and development of this type of system center around the information needs of strategy planners. Data that supply information on the organization's internal and external environments must be originated, evaluated, collected, organized, managed, and analyzed. Strategy planners may use the resulting information to improve their decision making.

Records Management System: Pilot Projects Functional Report, 1998

The Iowa Department of Transportation began preparation for the acquisition of an electronic document management system in 1996. The first phase was development of a strategic plan. The plan provided guidelines for defining the acquisition and implementation of a document management system to automate document handling and distribution. Phase 2 involved developing draft standards (document, indexing and technology) for planning and implementation of a document management system. These standards were to identify existing industry standards and determine which standards would best support the specific requirements of the Iowa Department of Transportation. During development of these standards, the decision was made to enlarge the scope of this effort from a document management system to a records management system (RMS). Phase .3 identified business processes that were to be further developed as pilot projects of a much larger agency-wide records management system.

Cartographie semi-automatisée des chutes de pierres le long d’infrastructures linéaires

La caractérisation détaillée de vastes territoires pose un défi de taille et est souvent limitée par les ressources disponibles et le temps. Les travaux de cette maîtrise s’incorporent au projet ParaChute qui porte sur le développement d’une Méthode québécoise d’Évaluation du Danger des Chutes de Pierres (MEDCP) le long d’infrastructures linéaires. Pour optimiser l’utilisation des ressources et du temps, une méthode partiellement automatisée facilitant la planification des travaux de terrain a été développée. Elle se base principalement sur la modélisation des trajectoires de chutes de pierres 3D pour mieux cibler les falaises naturelles potentiellement problématiques. Des outils d’automatisation ont été développés afin de permettre la réalisation des modélisations sur de vastes territoires. Les secteurs où l’infrastructure a le plus de potentiel d’être atteinte par d’éventuelles chutes de pierres sont identifiés à partir des portions de l’infrastructure les plus traversées par les trajectoires simulées. La méthode a été appliquée le long du chemin de fer de la compagnie ArcelorMittal Infrastructures Canada. Le secteur couvert par l’étude débute à une dizaine de kilomètres au nord de Port-Cartier (Québec) et s’étend sur 260 km jusqu’au nord des monts Groulx. La topographie obtenue de levés LiDAR aéroportés est utilisée afin de modéliser les trajectoires en 3D à l’aide du logiciel Rockyfor3D. Dans ce mémoire, une approche facilitant la caractérisation des chutes de pierres le long d’un tracé linéaire est présentée. Des études de trajectoires préliminaires sont réalisées avant les travaux sur le terrain. Les informations tirées de ces modélisations permettent de cibler les secteurs potentiellement problématiques et d’éliminer ceux qui ne sont pas susceptibles de générer des chutes de pierres avec le potentiel d’atteindre les éléments à risque le long de l’infrastructure linéaire.

Report : school survey to collect data on material performance

A survey of a number of schools in a number of different climates was carried out to determine the condition of building components of interest in the project. Schools in Melbourne, the Victorian Surf Coast, Brisbane, Townsville and the Sunshine Coast were inspected. A rating system was devised to categorise the components and the results collated in tables. Analysis of the data (where sufficient examples permitted) resulted in formulae to predict the service of the components and a database was derived.

A comparative study of manufacturing practices and performance variables

The reported study was conducted to compare and contrast current manufacturing practices between two countries, Australia and Malaysia, and identify the practices that significantly influence their manufacturing performances. The results are based on data collected from surveys using a standard questionnaire in both countries. Evidence indicates that product quality and reliability is the main competitive factor for manufacturers. Maintaining a supplier rating system and regularly updating it with field failure and warranty data and making use of product data management are found to be effective manufacturing practices. In terms of the investigated manufacturing performance, Australian manufacturers are marginally ahead of their Malaysian counterparts. However, Malaysian manufacturers came out ahead on most dimensions of advanced quality and manufacturing practices, particularly in the adoption of product data management, effective supply chains and relationships with suppliers and customers.

A Tale of two helicopters

This paper discusses similarities and differences in autonomous helicopters developed at USC and CSIRO. The most significant differences are in the accuracy and sample rate of the sensor systems used for control. The USC vehicle, like a number of others, makes use of a sensor suite that costs an order of magnitude more than the vehicle. The CSIRO system, by contrast, utilizes low-cost inertial, magnetic, vision and GPS to achieve the same ends. We describe the architecture of both autonomous helicopters, discuss the design issues and present comparative results.

Exercise and cancer rehabilitation : a systematic review

Introduction: Cancer is increasingly being viewed as a chronic illness requiring long-term management, and there is a growing need for evidence-based rehabilitation interventions for cancer survivors. Previous reviews have evaluated the benefits of exercise interventions for patients undergoing cancer treatment and long-term survivors, but none have investigated the role of exercise during cancer rehabilitation, the period immediately following cancer treatment completion. This systematic review summarises the literature on the health effects of exercise during cancer rehabilitation and evaluates the methodological rigour of studies in this area to date.----------- Methods: Relevant studies were identified through a systematic search of PubMed and Embase to April 2009. Data on study design, recruitment strategy, participants, exercise intervention, adherence rates, and outcomes were extracted. Methodological rigour was assessed using a structured rating system.---------- Results: Ten studies were included. Breast cancer patients were the predominate patient group represented. Most interventions were aerobic or resistance-training exercise programmes, and exercise type, frequency, duration and intensity varied across studies. Improvements in physical functioning, strength, physical activity levels, quality of life, fatigue, immune function, haemoglobin concentrations, potential markers of recurrence, and body composition were reported. However, all studies were limited by incomplete reporting and methodological limitations.---------- Conclusions: Although the methodological limitations of studies in this new field must be acknowledged, initial evidence indicates that exercise is feasible and may provide physiological and psychological benefits for cancer survivors during the rehabilitation period. Future studies with rigorous study designs are now required to advance the field.

Classification of railway bridges based on criticality and vulnerability factors

Bridges are currently rated individually for maintenance and repair action according to the structural conditions of their elements. Dealing with thousands of bridges and the many factors that cause deterioration, makes this rating process extremely complicated. The current simplified but practical methods are not accurate enough. On the other hand, the sophisticated, more accurate methods are only used for a single or particular bridge type. It is therefore necessary to develop a practical and accurate rating system for a network of bridges. The first most important step in achieving this aim is to classify bridges based on the differences in nature and the unique characteristics of the critical factors and the relationship between them, for a network of bridges. Critical factors and vulnerable elements will be identified and placed in different categories. This classification method will be used to develop a new practical rating method for a network of railway bridges based on criticality and vulnerability analysis. This rating system will be more accurate and economical as well as improve the safety and serviceability of railway bridges.

From evidence to action: a shared leadership approach

This paper proposes an organisational effectiveness model that applies the theoretical frameworks of shared leadership, appreciative inquiry, and knowledge creation. Similar to many libraries worldwide, Auraria Library technical services department struggled to establish efficient and effective workflow for electronic resources management. The library purchased an Electronic Resource Management System, as the literature suggests; however, this technology-enabled system did not resolve workflow issues. The Auraria Library case study demonstrates that a technical services division can successfully reorganize personnel, reassign responsibilities, and measure outcomes within an evidencebased shared leadership culture, which invites and enables participants to identify problems and create solutions amidst a dynamically changing electronic resources environment.