Evaluation of light transmission through translucent and opaque posts

Objectives: The transmission of light through translucent posts was observed, and the microhardness of light-cured cement used to secure these posts was evaluated at different depths. Methods: Fifteen single-rooted standard bovine teeth, 16 mm in size, were used. The root canals were prepared using #3 drills Light-Post (five teeth) and Aestheti Post (five teeth) systems (BISCO), with a working-length of 12 mm. In five teeth, translucent posts were cemented (Light-Post #2), while another five teeth received opaque posts (Aestheti Post #2). The roots were painted with black nail varnish to prevent the passage of light through the lateral walls of the roots. The root canals of all the specimens were treated with the All-Bond 2 adhesive system (BISCO) and cemented with light-cured cement (Enforce, Dentsply). All the roots were transversally cut to obtain six specimens 1.5 mm thick. Every two sections corresponded to a specific region of the root (cervical, middle, apical), making it possible to observe the cement microhardness at different levels. The groups (n=10) were defined as: G1: translucent post (TP)/cervical region; G2: TP/middle region; G3: TP/apical region; G4: Opaque post (OP)/cervical region; G5: OP/middle region; G6: PO/apical region. Five root canals were only filled with cement for use as a control (G7). Then, Vickers microhardness analyses were performed. Results: In G3, G5 and G6, the cement was not sufficiently hard to allow for microhardness analysis. When submitted to the ANOVA test, G1 (35.07), G2 (24.28) and G4 (28.64) presented no statistical differences. When the previous groups were compared to G7 (51.00) using the Kruskal-Wallis test, a statistical difference was found. Conclusion: Translucent posts allow cement polymerization up to the middle portion of the root.

The gradually truncated Lévy flight: Stochastic process for complex systems

Power-law distributions, i.e. Levy flights have been observed in various economical, biological, and physical systems in high-frequency regime. These distributions can be successfully explained via gradually truncated Levy flight (GTLF). In general, these systems converge to a Gaussian distribution in the low-frequency regime. In the present work, we develop a model for the physical basis for the cut-off length in GTLF and its variation with respect to the time interval between successive observations. We observe that GTLF automatically approach a Gaussian distribution in the low-frequency regime. We applied the present method to analyze time series in some physical and financial systems. The agreement between the experimental results and theoretical curves is excellent. The present method can be applied to analyze time series in a variety of fields, which in turn provide a basis for the development of further microscopic models for the system. © 2000 Elsevier Science B.V. All rights reserved.

Length-weight relationships, condition and population structure of the genus Atlantoraja (Elasmobranchii, Rajidae, Arhynchobatinae) in Southeastern Brazilian waters, SW Atlantic Ocean

During the present study, 107 specimens of Atlantoraja castelnaui, 188 of A. platana, and 770 of A. cyclophora, were obtained by commercial vessels operating in Southeastern Brazil from March 2005 to April 2006. Males of A. castelnaui ranged from 17.9-111.0 cm and females from 17.4-116.0 cm total length. Males of A. platana ranged from 13.1-70.0 cm and females from 12.5-76.0 cm total length. Males of A. cyclophora ranged from 13.3-58.5 cm and females from 11.5-68.0 cm total length. Length-weight curves were sexually dimorphic in the three species. The analysis of the angular coefficient (b) demonstrated that growth (in weight) in relation to length was allometric (b>3) in males of A. castelnaui and A. platana, while isometric (b = 3) in females of these species. Conversely, growth of A. cyclphora was isometric in males, while in females it was allometric (b>3). The condition factor varied significantly throughout the year only in females of A. castelnaui.

Bond strength of adhesive systems with different solvents to dry and wet dentin

Aim: This study evaluates bond strength between dentin and composite using adhesives with different solvents to dry and wet dentin. Materials and methods: Ninety bovine incisors were used; the vestibular surfaces were worn by the exposure of an area with a diameter of 4 mm of dentin. The specimens were divided into 6 groups, according to the type of adhesive used and hydratation stals: Group SB-wet: Single Bond 2 in wet dentin, Group SBdry: Single Bond 2 in dry dentin, Group SL-wet: Solobond M in wet dentin, Group SL-dry: Solobond M in dentin dry. Group XPwet: XP Bond in wet dentin, Group XP-dry: XP Bond in dentin dry. They were cut to obtain specimens in the shape of stick with 1 × 1 mm and subjected to microtensile test in universal testing machine with a cross speed of 1mm/min. The data were analyzed with ANOVA and Tukey's tests (5%). Results: ANOVA showed significant differences for surface treatment and interaction, but no difference was found for adhesive factor. The Tukey's test showed that the samples with wet dentin shown higher values of bond strength. Conclusion: The adhesive did not influence in the bond strength. The groups with wet dentin showed higher values of bond strength than groups with dry dentin.

Utilização de luz ultravioleta contínua (UV-C) e luz pulsada para conservação de mangas CV. Tommy Atkins minimamente processadas

Pós-graduação em Agronomia (Produção Vegetal) - FCAV

Avaliação do tempo e da concentração do condicionamento com ácido fluorídrico sobre a resistência de união entre cerâmica e cimento resinoso

The aim of this study was to verify through microtensile test the influence of time and concentration of surface conditioning with hydrofluoric acid and its interference in the adhesion of dual resin cement to porcelain.We used 32 bodies of glass-ceramic lithium disilicate system IPS e.max Press LT with dimensions of 6mm thick, 8 mm in length and 8 mm in length, which will be molded to obtain composite resin blocks corresponding to blocks ceramics. Ceramic and resin blocks were divided into 16 groups (n = 4) and numbered according to the concentration of hydrofluoric acid (2.5%, 5%, 7.5% and 10%) and conditioning time (20 seconds, 40 seconds, 1 minute and 2 minutes). The blocks were cleaned in ultrasonic apparatus with distilled water and dried with compressed air, subjected to acid etching and air-jet washed with water, dried with compressed air and received application of silane agent Monobond-S, followed by adhesive Excite ( Ivoclar Vivaden). Each ceramic block was bonded to the corresponding block of resin through the resin cement Multilink Automix. The specimens were cut to obtain nine micro samples for each set of ceramic-resin with 1 mm X 1 mm X 12 mm in length, which were submitted to microtensile test. The results were analyzed with descriptive statistics and analysis of variance with significance level of 5%, revealing that there were statistically significant (p = 0.000001 <0.05). From the Tukey test can be concluded that etching with hydrofluoric acid and 2.5% for 120 seconds gave the best bond strength, however, no statistical difference between the conditioning with the same acid in the concentration of 5.0% for 20 to 40 seconds

Bonding ability of paste-paste glass ionomer systems to tooth structure: in vitro studies

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Risk-based Modeling to Develop Zoning Criteria for Land-use Near Canadian Airports

Land development in the vicinity of airports often leads to land-use that can attract birds that are hazardous to aviation operations. For this reason, certain forms of land-use have traditionally been discouraged within prescribed distances of Canadian airports. However, this often leads to an unrealistic prohibition of land-use in the vicinity of airports located in urban settings. Furthermore, it is often unclear that the desired safety goals have been achieved. This paper describes a model that was created to assist in the development of zoning regulations for a future airport site in Canada. The framework links land-use to bird-related safety-risks and aircraft operations by categorizing the predictable relationships between: (i) different land uses found in urbanized and urbanizing settings near airports; (ii) bird species; and (iii) the different safety-risks to aircraft during various phases of flight. The latter is assessed relative to the runway approach and departure paths. Bird species are ranked to reflect the potential severity of an impact with an aircraft (using bird weight, flocking characteristics, and flight behaviours). These criteria are then employed to chart bird-related safety-risks relative to runway reference points. Each form of land-use is categorized to reflect the degree to which it attracts hazardous bird species. From this information, hazard and risk matrices have been developed and applied to the future airport setting, thereby providing risk-based guidance on appropriate land-uses that range from prohibited to acceptable. The framework has subsequently been applied to an existing Canadian airport, and is currently being adapted for national application. The framework provides a risk-based and science-based approach that offers municipalities and property owner’s flexibility in managing the risks to aviation related to their land use.

Efficient Forest Data Structure for Evolutionary Algorithms Applied to Network Design

The design of a network is a solution to several engineering and science problems. Several network design problems are known to be NP-hard, and population-based metaheuristics like evolutionary algorithms (EAs) have been largely investigated for such problems. Such optimization methods simultaneously generate a large number of potential solutions to investigate the search space in breadth and, consequently, to avoid local optima. Obtaining a potential solution usually involves the construction and maintenance of several spanning trees, or more generally, spanning forests. To efficiently explore the search space, special data structures have been developed to provide operations that manipulate a set of spanning trees (population). For a tree with n nodes, the most efficient data structures available in the literature require time O(n) to generate a new spanning tree that modifies an existing one and to store the new solution. We propose a new data structure, called node-depth-degree representation (NDDR), and we demonstrate that using this encoding, generating a new spanning forest requires average time O(root n). Experiments with an EA based on NDDR applied to large-scale instances of the degree-constrained minimum spanning tree problem have shown that the implementation adds small constants and lower order terms to the theoretical bound.

Vulnerability to risk among small farmers in Tajikistan: results of a 2011 survey

Tajikistan is judged to be highly vulnerable to risk, including food insecurity risks and climate change risks. By some vulnerability measures it is the most vulnerable among all 28 countries in the World Bank’s Europe and Central Asia Region – ECA (World Bank 2009). The rural population, with its relatively high incidence of poverty, is particularly vulnerable. The Pilot Program for Climate Resilience (PPCR) in Tajikistan (2011) provided an opportunity to conduct a farm-level survey with the objective of assessing various dimensions of rural population’s vulnerability to risk and their perception of constraints to farming operations and livelihoods. The survey should be accordingly referred to as the 2011 PPCR survey. The rural population in Tajikistan is highly agrarian, with about 50% of family income deriving from agriculture (see Figure 4.1; also LSMS 2007 – own calculations). Tajikistan’s agriculture basically consists of two groups of producers: small household plots – the successors of Soviet “private agriculture” – and dehkan (or “peasant”) farms – new family farming structures that began to be created under relevant legislation passed after 1992 (Lerman and Sedik, 2008). The household plots manage 20% of arable land and produce 65% of gross agricultural output (GAO). Dehkan farms manage 65% of arable land and produce close to 30% of GAO. The remaining 15% of arable land is held in agricultural enterprises – the rapidly shrinking sector of corporate farms that succeeded the Soviet kolkhozes and sovkhozes and today produces less than 10% of GAO (TajStat 2011) The survey conducted in May 2011 focused on dehkan farms, as budgetary constraints precluded the inclusion of household plots. A total of 142 dehkan farms were surveyed in face-to-face interviews. They were sampled from 17 districts across all four regions – Sughd, Khatlon, RRP, and GBAO. The districts were selected so as to represent different agro-climatic zones, different vulnerability zones (based on the World Bank (2011) vulnerability assessment), and different food-insecurity zones (based on WFP/IPC assessments). Within each district, 3-4 jamoats were chosen at random and 2-3 farms were selected in each jamoat from lists provided by jamoat administration so as to maximize the variability by farm characteristics. The sample design by region/district is presented in Table A, which also shows the agro-climatic zone and the food security phase for each district. The sample districts are superimposed on a map of food security phases based on IPC April 2011.

Automated optimization of polymer extrusion dies using finite element analysis

An extrusion die is used to continuously produce parts with a constant cross section; such as sheets, pipes, tire components and more complex shapes such as window seals. The die is fed by a screw extruder when polymers are used. The extruder melts, mixes and pressures the material by the rotation of either a single or double screw. The polymer can then be continuously forced through the die producing a long part in the shape of the die outlet. The extruded section is then cut to the desired length. Generally, the primary target of a well designed die is to produce a uniform outlet velocity without excessively raising the pressure required to extrude the polymer through the die. Other properties such as temperature uniformity and residence time are also important but are not directly considered in this work. Designing dies for optimal outlet velocity variation using simple analytical equations are feasible for basic die geometries or simple channels. Due to the complexity of die geometry and of polymer material properties design of complex dies by analytical methods is difficult. For complex dies iterative methods must be used to optimize dies. An automated iterative method is desired for die optimization. To automate the design and optimization of an extrusion die two issues must be dealt with. The first is how to generate a new mesh for each iteration. In this work, this is approached by modifying a Parasolid file that describes a CAD part. This file is then used in a commercial meshing software. Skewing the initial mesh to produce a new geometry was also employed as a second option. The second issue is an optimization problem with the presence of noise stemming from variations in the mesh and cumulative truncation errors. In this work a simplex method and a modified trust region method were employed for automated optimization of die geometries. For the trust region a discreet derivative and a BFGS Hessian approximation were used. To deal with the noise in the function the trust region method was modified to automatically adjust the discreet derivative step size and the trust region based on changes in noise and function contour. Generally uniformity of velocity at exit of the extrusion die can be improved by increasing resistance across the die but this is limited by the pressure capabilities of the extruder. In optimization, a penalty factor that increases exponentially from the pressure limit is applied. This penalty can be applied in two different ways; the first only to the designs which exceed the pressure limit, the second to both designs above and below the pressure limit. Both of these methods were tested and compared in this work.

An evaluation of the impact of Inner City Development's Cooperative Home School: An educational alternative program to increase the quality and level of education in San Antonio's West Side community

The research study was intended to evaluate the effectiveness of Inner City Development's (I.C.D.) Cooperative Home School, an educational alternative program to the Title I public schools of San Antonio's West Side community. The study investigated students', parents' and tutors' perception of parental involvement and educational resources. The study also investigated each student's academic achievement. ^ The study found that students progressed toward expected math proficiency at a faster rate than they did in reading proficiency. However, because the target population size was small and a comparison group was not used, the results of this study are only suggestive. This research also indicated that study subjects believed students' quality and level of education increased substantially since program exposure. Study subjects mainly attributed the students' strides in academic performance to the increased amount of individualized attention students received in the small twelve-student class size. Study subjects were more satisfied with the home school's educational resources than those of the Title I public schools. Study subjects also perceived that parental involvement both at home and at school increased since enrollment in the home school program because: (1) there were more opportunities for involvement in the home school; and (2) parents felt closer to the tutors than the teachers in public school. ^ This evaluation also suggested improvements to program operations. With the help of additional volunteers, I.C.D. program operators could improve collection and organization of academic records. Furthermore, as suggested by program participants, science could be added to the curriculum. Lastly, a formal tutor orientation could be implemented to familiarize and train tutors on classroom management procedures. ^

Factores que afectan la emisión de escapo floral y producción de bulbillos aéreos en ajo (Allium sativum L.)

El ajo constituye el principal producto agrícola no transformado destinado a la exportación en Mendoza. En la Argentina, la ausencia de cultivares específicas de ajo y producción de semilla fiscalizada han sido unas de las principales debilidades del sistema exportador. Para que los materiales provenientes de los planes de mejoramiento y saneados lleguen rápidamente al productor es necesario acelerar la tasa de multiplicación de los mismos. Con esta finalidad, los bulbillos aéreos que se forman en el extremo del escapo de ajo tipo “colorado" (Grupo IV, Argentina) libre de virus, pueden ser utilizados como propágulos en la producción de ajo “semilla". El objetivo general del presente trabajo fue establecer la influencia del: genotipo, liberación de virus (OYDV y LYSV), tamaño de “diente" empleado como propágulo, fertilización nitrogenada y conservación de los escapos luego de la cosecha, en la producción de bulbillos aéreos. En Mendoza, Argentina, se evaluaron durante el ciclo 1994, 32 introducciones de ajo tipo “colorado" de distinto origen, por su hábito de floración y producción de bulbillos aéreos. Se llevaron a cabo durante los años 1995 y 1996 dos ciclos de ensayos, en los que se evaluó en una población clonal de ajo “colorado criollo" (AR-I-051) y una de ajo “ruso" (AR-I-033) el efecto del saneamiento viral sobre la floración y producción de bulbillos aéreos, trabajando con material crónicamente enfermo y libre de OYDV y LYSV. En AR-I-051 además se estudió el efecto del tamaño de “diente" (2; 3,5 y 5 g ó 1,2; 3,2 y 5,2 g) e influencia de la fertilización nitrogenada (0, 50 y 100 kg.ha-1 de N como SO4(NH4)2). Entre 1995 y 1998, se compararon diversas métodos de “curado" de los escapos luego de la cosecha de las plantas (en planta entera, cortados de distintas longitudes, mantenidos en seco o con inmersión de sus bases en agua o en solución nutritiva con o sin el regulador del crecimiento CCC). Se concluye que la producción de bulbillos aéreos depende del genotipo considerado. En ajo “colorado" se distinguen 5 grupos por su modalidad de floración y potencialidad de producción de bulbillos. La producción de bulbillos aéreos útiles (>2,4 mm de diámetro) depende del tiempo transcurrido entre floración y cosecha y no entre plantación y floración. Se puede predecir la cantidad de bulbillos aéreos útiles (Numa) sobre la base del diámetro de espata (espa) y la longitud de escapo (long) al momento de cosecha, según la ecuación: Numa = - 81,62 + 4,79 espa + 1,05 long (r2 = 0,88). v La capacidad de cada genotipo de emitir escapos, disminuye con la liberación de OYDV y LYSV, por lo que la producción por hectárea de bulbillos aéreos útiles es menor en el material saneado. El empleo de material saneado, “dientes" grandes, como la fertilización con N producen plantas de mayor tamaño y con mayor área foliar, lo que se traduce en un mayor rendimiento en la producción de bulbos. Sin embargo, la producción de bulbillos aéreos por hectárea disminuye, debido al menor porcentaje de plantas que emiten escapos y no a la disminución del número de bulbillos por planta. En cambio, todas aquellas condiciones que favorecen menor expresión vegetativa de las plantas aumentan la emisión de escapos. El “curado" de los escapos separados de la planta madre se puede llevar a cabo sin necesidad de realizar la inmersión de la base de los mismos en agua o en solución nutritiva con o sin CCC. La longitud a la cual se deben cortar los escapos, de manera de no afectar la producción de bulbillos, depende del grado de crecimiento de los bulbillos en el campo. La longitud de corte del escapo en ajo “criollo", con escaso crecimiento de los bulbillos aéreos en el campo, no debe ser inferior a 50 cm. En ajo “ruso", que presenta al momento de cosecha de las plantas un desarrollo avanzado de los bulbillos aéreos, los escapos pueden cortarse de menor longitud, sin afectar la producción de bulbillos aéreos. La longitud del escapo, en planta o separado de ella, afecta la producción de bulbillos aéreos en forma directamente proporcional.

Survival probability of round and tape tethers against debris impact

The current space environment, consisting of manmade debris and micrometeoroids, poses a risk to safe operations in space, and the situation is continuously deteriorating due to in-orbit debris collisions and to new satellite launches. Bare electrodynamic tethers can provide an efficient mechanism for rapid deorbiting of satellites from low Earth orbit at end of life. Because of its particular geometry (length very much larger than cross-sectional dimensions), a tether may have a relatively high risk of being severed by the single impact of small debris. The rates of fatal impact of orbital debris on round and tape tethers of equal length and mass, evaluated with an analytical approximation to debris flux modeled by NASA’s ORDEM2000, shows much higher survival probability for tapes. A comparative numerical analysis using debris flux model ORDEM2000 and ESA’s MASTER2005 validates the analytical result and shows that, for a given time in orbit, a tape has a probability of survival of about one and a half orders of magnitude higher than a round tether of equal mass and length. Because deorbiting from a given altitude is much faster for the tape due to its larger perimeter, its probability of survival in a practical sense is quite high.

Uncertainty in ellipse fitting using a flatbed scanner: development and experimental verification

In the field of dimensional metrology, the use of optical measuring machines requires the handling of a large number of measurement points, or scanning points, taken from the image of the measurand. The presence of correlation between these measurement points has a significant influence on the uncertainty of the result. The aim of this work is the development of an estimation procedure for the uncertainty of measurement in a geometrically elliptical shape, taking into account the correlation between the scanning points. These points are obtained from an image produced using a commercial flat bed scanner. The characteristic parameters of the ellipse (coordinates of the center, semi-axes and the angle of the semi-major axis with regard to the horizontal) are determined using a least squares fit and orthogonal distance regression. The uncertainty is estimated using the information from the auto-correlation function of the residuals and is propagated through the fitting algorithm according to the rules described in Evaluation of Measurement Data—Supplement 2 to the ‘Guide to the Expression of Uncertainty in Measurement’—Extension to any number of output quantities. By introducing the concept of cut-off length, it can be observed how it is possible to take into account the presence of the correlation in the estimation of uncertainty in a very simple way while avoiding underestimation.