Correlating Additives to Deterioration and Assessing the Effectiveness of Acrylic Coatings for the Protection of Rubber

Conservators have long been aware of the problems associated with the preservation of rubber objects due to inherent instability that can be attributed, in part, to the presence of additives. Inorganic additives, such as fillers, accelerators, stabilizers, and special ingredients are necessary in manufacturing to alter the properties of natural rubber. These materials all have different interactions with the rubber, and each other, and differing effects on the ageing process. To date, the most effective and accepted methods to preserve rubber are cold, dark storage of objects, or the use of low oxygen environments. While these methods are effective, they greatly limit access. The application of coatings to the surface of rubber objects can slow deterioration and greatly increase the ability of an institution to handle and display rubber objects. While numerous coatings for preventive and interventive treatment have been tested, none have been so successful to warrant routine use. The first section of this research highlighted the relationship between the inclusion of certain additives in natural rubber objects and the accelerated or slowed down overall degradation. In the second part of this research, the acrylic varnishes Golden Polymer Varnish with UVLS, Lascaux Acrylic Transparent Varnish-UV, Sennelier Matte Lacquer with UV Protection, and Liquitex Soluvar Varnish containing ultraviolet light absorbers or stabilizers were tested as a preventative coating for rubber. Through testing the visual and physical properties of the samples, as well as compound analysis the results of this research suggest that acrylic varnishes do provide protection, each to varying degrees. The results also provided insight into the behavior of rubber and these varnishes with continuing light exposure.

Chiral thiouronium salts: synthesis, characterisation and application in NMR enantio-discrimination of chiral oxoanions

Chiral thioureas and functionalised chiral thiouronium salts were synthesised starting from the relatively cheap and easily available chiral amines: (S)-methylbenzylamine and rosin-derived (+)-dehydroabietylamine. The introduction of a delocalised positive charge to the thiourea functionality, by an alkylation reaction at the sulfur atom, enables dynamic rotameric processes: hindered rotations about the delocalised CN and CS bonds. Hence, four different rotamers/isomers may be recognised: syn-syn, syn-anti, anti-syn and anti-anti. Extensive H-1 and C-13 NMR studies have shown that in hydrogen-bond acceptor solvents, such as perdeuteriated dimethyl sulfoxide, the syn-syn conformation is preferable. On the other hand, when using non-polar solvents, such as CDCl3, the mixture of syn-syn and syn-anti isomers is detectable, with an excess of the latter. Apart from this, in the case of S-butyl-N,N'-bis(dehydroabietyl)thiouronium ethanoate in CDCl3, the H-1 NMR spectrum revealed that strong bifurcated hydrogen bonding between the anion and the cation causes global rigidity without signs of hindered rotamerism observable on the NMR time scale. This suggested that these new salts might be used as NMR discriminating agents for chiral oxoanions, and are indeed more effective than their archetypal guanidinium analogues or the neutral thioureas. The best results in recognition of a model substrate, mandelate, were obtained with S-butyl-N,N'-bis(dehydroabietyl) thiouronium bistriflamide. It was confirmed that the chiral recognition occurred not only for carboxylates but also for sulfonates and phosphonates. Further H-1 NMR studies confirmed a 1 : 1 recognition mode between the chiral agent (host) and the substrate (guest); binding constants were determined by H-1 NMR titrations in solutions of DMSO-d(6) in CDCl3. It was also found that the anion of the thiouronium salt had a significant influence on the recognition process: anions with poor hydrogen-bond acceptor abilities led to the best discrimination. The presence of host-guest hydrogen bonding was confirmed in the X-ray crystal structure of S-butyl-N,N'-bis(dehydroabietyl)thiouronium bromide and by computational studies (density functional theory).

Comparison of tack of pressure-sensitive adhesives (PSAs) at different temperatures

Pressure-sensitive adhesives (PSAs) have applications in the fields of packaging, joining, wound care, and personal care. Depending on the application of the PSA, different performance tests are carried out when new products are developed or the quality of the existing products is checked. Tack is the property of an adhesive that enables it to form instant bond on the surface under light pressure. The tack of a PSA strongly depends on the way the bond is created. Parameters such as the bonded area, contact time and the nature of tack materials all affect the tack force measured. In the development of any PSA, it is desirable to correlate the performance related properties such as tack and peel strength to the rheological behaviour. Finding these correlations would make it possible to evaluate the performance of a PSA using its rheological characteristics. In this investigation we have studied the influence of rheological behaviour of three different PSAs on their tackiness. The three different PSAs used in this study are a low molecular weight rosin ester, high molecular weight rosin ester, and dicyclopentadiene. Various rheological properties such as viscosity, phase angle, and elastic and viscous moduli are measured versus the frequency and temperature. Also the tack properties at various removal speeds and temperatures are evaluated. Analysis of the results indicates different performances of the three PSAs which could be related to their rheological properties, especially the phase angle, at different frequencies and temperatures. The PSA with high molecular weight rosin ester is more sensitive to temperature changes and showed drastic changes in tackiness from high temperature to low temperature. On the other hand, rosin ester with low molecular weight is less sensitive to temperature changes. © 2010 VSP.

Embalagens Flexíveis: estudo do processo de reticulação de adesivos e do coeficiente de atrito

A dissertação foi realizada em ambiente industrial, mais precisamente na empresa Monteiro, Ribas – Embalagens Flexíveis, S.A.. Esta empresa dedica-se à impressão e laminagem de filmes, assim como à confeção de sacos. Os seus produtos são direcionados na sua maioria para a indústria alimentar, exportando mais de 50% da sua produção, e dizem respeito a complexos (dois ou mais filmes unidos pela presença de um adesivo) que podem possuir impressão ou não. Estes complexos podem ser enviados para o cliente em bobina ou já em saco. Os objetivos propostos pela empresa diziam respeito a estudos relacionados com a força de laminagem dos complexos, com o coeficiente de atrito dos mesmos e com a identificação dos espetros dos componentes dos adesivos, assim como o estudo do processo de reticulação dos mesmos por espetrofotometria de Infravermelho. Relativamente aos resultados obtidos verificou-se que tanto a tinta como os metalizados influenciam negativamente a força de laminagem. Por sua vez o coeficiente de atrito é afetado por vários fatores. Através dos ensaios experimentais verificou-se que o adesivo, a tinta e o verniz mate favorecem o aumento do valor do COF. Além disso, nos complexos em que se utilizaram filmes de polietileno de maior espessura obtiveram-se valores de COF mais baixos, e no que diz respeito à temperatura e à tensão de enrolamento, verificou-se que valores mais elevados e muito baixos da primeira traduzem-se num aumento do valor do COF e uma tensão de enrolamento maior também tem o mesmo efeito. Relativamente ao tipo de filme impresso, substratos com maior energia superficial atraem mais o agente de deslizamento (slip). Por último, não se conseguiu perceber qual o tipo de adesivo (com ou sem solvente) que tem maior impacto no COF uma vez que em 55% dos casos o valor do COF é superior nas amostras que foram complexadas com adesivo sem solvente e em 45% o COF era superior nas amostras complexadas com adesivo base solvente. No que diz respeito aos espetros obtidos verificou-se que a reticulação dos adesivos é identificada pela diminuição da extensão do pico correspondente à ligação N=C=O.

Daptomycin for highly resistant Enterococcus faecium infection.

We report a case series of 11 patients with severe E. faecium infections treated with daptomycin. All strains were resistant to ampicillin (MIC >8 mg/l), but susceptible to vancomycin. Seven out of 11 strains were also highly resistant to gentamicin (MIC >500 mg/l). All patients were treated with multiple broad-spectrum antibiotics prior to isolation of E. faecium and had severe underlying diseases. Our experience suggests that salvage therapy with daptomycin might be a safe and efficacious treatment for E. faecium infections.

Recueil de vers en l'honneur de Châlons-sur-Marne et de ses conseillers.

Contient : 1 « La fondation de Chaalons. Eclogue par J. DE MEULLES, Sr Du Rosier. 1627 » ; a « A messieurs du conseil de la ville de Chaalons. Epistre. Messieurs, je fais discourir poetiquement les bergers de cette eclogue, touchant l'ancienne fondation de Chaalons... » ; b « Argument. Un berger nommé Rosin, rencontre Amydor en sa loge, contre la forêt de Sary, pendant les froidures extresmes du commencement de l'année... » ; c Eclogue. Amydor. Aristandre. Lygdamon. Rosin » ; 2 « Le triomphe de la vertu », par le même. « Dedié à messieurs du conseil de la ville de Chaalons »

Exploring an emotion intervention for preschoolers with autism spectrum disorder /

The purpose of this multiple case study was 1) to explore the effectiveness of an emotions recognition program for preschoolers with Autism Spectrum Disorders (ASD), and 2) to investigate one parent's perception of the emotions program. To address these objectives, the emotion unit scores of 7 preschoolers with ASD aged 3 to 5 years old (1 female, 6 males) were graphed and analyzed using visual inspection. In addition, the mother of 1 participant was interviewed to explore her perceptions of the emotions program and emotional learning. Overall, results revealed that participants' emotion recognition scores increased over the course of the emotions unit. The parent reported improvements in her son's expression and understanding of emotion, but noted that he continued to have difficulty with regulation of emotion. Implications for theory, education, and future research are discussed.

Canada Starch Company (CASCO) Fonds, 1980-1987, n.d.

CASCO (Canada Starch Company) began operations in 1982 and was officially opened in May of 1983. Premier William Davis was in attendance. CASCO is a company whose roots can be traced back to 1858 when it was founded by W.T. Benson in Cardinal, Ontario. The company grew as corn uses were developed. Corn derived products now include: corn oil, liquid sweetener and feed for dairy and cattle. Starch is used as a finish for fine papers, a component in dry cell batteries, pharmaceuticals, wallpaper, film, tires, surgical dressings, plastics and plywood. Corn syrup is used in beverages, canned fruit, frozen seafood, licorice, ice cream and baking products. Corn solubles are used in animal feed, rubber substitutes, soap, paint and varnish. There are more than 250 industrial and food uses for corn

Évaluation des niveaux d’éthanolémie résultant de l’exposition à l’éthanol par inhalation : études chez des volontaires et modélisation toxicocinétique

Un modèle pharmacocinétique à base physiologique (PBPK) d’exposition par inhalation à l’éthanol a antérieurement été développé en se basant sur des données provenant d’une étude chez des volontaires exposés par inhalation à plus de 5000 ppm. Cependant, une incertitude persiste sur la capacité du modèle PBPK à prédire les niveaux d’éthanolémie pour des expositions à de faibles concentrations. Ces niveaux sont fréquemment rencontrés par une large partie de la population et des travailleurs suite à l’utilisation de produits tels que les vernis et les solutions hydroalcooliques (SHA). Il est ainsi nécessaire de vérifier la validité du modèle existant et de déterminer l’exposition interne à l’éthanol dans de telles conditions. Les objectifs du mémoire sont donc 1) de documenter les niveaux d’éthanolémie résultant de l’exposition par inhalation à de faibles concentrations d’éthanol (i.e., ≤ 1000 ppm) et de valider/raffiner le modèle PBPK existant pour ces concentrations ; et 2) de déterminer les concentrations d’éthanol atmosphérique provenant d’utilisation de SHA et de vernis et de prédire les niveaux d’éthanolémie découlant de leur utilisation. Les données toxicocinétiques récoltées chez des volontaires nous suggèrent qu’il est insuffisant de limiter au foie la clairance métabolique de l’éthanol lors d’exposition à de faibles niveaux d’éthanol, contrairement aux expositions à de plus forts niveaux. De plus, il a clairement été démontré qu’un effort physique léger (50 W) influençait à la hausse (2-3 fois) l’éthanolémie des volontaires exposés à 750 ppm. L’ajout au modèle PBPK d’une clairance métabolique de haute affinité et de faible capacité associée aux tissus richement perfusés a permis de simuler plus adéquatement la cinétique de l’éthanolémie pour des expositions à des concentrations inférieures à 1000 ppm. Des mesures de concentrations d’éthanol dans l’air inhalé générées lors d’utilisation de SHA et de vernis ont permis de simuler des expositions lors de l’utilisation de ces produits. Pour l’utilisation de 1,5 g et 3 g de SHA dans un local peu ventilé, des concentrations sanguines maximales (Cmax) de 0.383 et 0.366 mg.L-1 ont été respectivement simulées. Dans un local bien ventilé, les Cmax simulées étaient de 0.264 et 0.414 mg.L-1. Selon les simulations, une application de vernis résulterait en une Cmax respectivement de 0.719 mg.L-1 et de 0.729 mg.L-1, chez les hommes et femmes. Les Cmax sanguines d’éthanol estimées suites aux différentes simulations sont inférieures à la concentration toxique pour les humains (100 mg.L-1). Ainsi, de telles expositions ne semblent pas être un danger pour la santé. Les résultats de cette étude ont permis de mieux décrire et comprendre les processus d’élimination de l’éthanol à faibles doses et permettront de raffiner l’évaluation du risque associé à l’inhalation chronique de faibles niveaux d’éthanol pour la population, particulièrement chez les travailleurs.

Studies on adhesives for bonding rubber to rubber and rubber to textiles

The primary objective of this investigation has been to develop more efficient and low cost adhesives for bonding various elastomer combinations particularly NR to NR, NR/PB to NR/PB, CR to CR,NR to CR and NR to NBR.A significant achievement of the investigation was the development of solventless and environment friendly solid adhesives for NR to NR and NR/PB to NR/PB particularly for precured retreading. Conventionally used adhesives in this area are mostly NR based adhesive strips in the presence of a dough. The study has shown that an ultra accelerator could be added to the dough just before applying it on the tire which can significantly bring down the retreading time resulting in prolonged tire service and lower energy consumption. Further latex reclaim has been used for the preparation of the solid strip which can reduce the cost considerably.Another significant finding was that by making proper selection of the RF resin, the efficiency and shelflife of the RFL adhesive used for nylon and rayon tire cord dipping can be improved. In the conventionally used RFL adhesive, the resin once prepared has to be added to the latex within 30 minutes and the RFL has to be used after 4 hours maturation time maximum shelf life of the RFL dip solution being 72 hours. In this study a formaldehyde deficient resin was used and hence more flexibility was available for mixing with latex and maturing. It also has a much longer shelf life. In the method suggested in this study, formaldehyde donors were added only in the rubber compound to make up the formaldehyde deficiency in the RFL. The results of this investigation show that the pull through load by employing this method and the conventional method are comparable. This study has also shown that the amount of RF resin with RFL adhesive can be partially replaced by other modifying agents for cost reduction.Cashew nut shell liquid (CNSL) resin can be employed for improving the bonding of dipped nylon and rayon cord with NR.Since CNSL resin cannot be added in the dip solution since it is not soluble in water, it was added in the rubber compound. The amount of wood rosin in the rubber compound can be reduced by using CNSL resin.Another interesting result of the investigation was the use of CR based adhesive modified with chlorinated natural rubber for CR to CR bonding. Addition of chlorinated natural rubber was found to improve sea water resistance of CR based adhesive. In the bonding of a polar rubber like nitrile rubber or polychloroprene rubber to a non polar rubber like natural rubber, an adhesive based on polychloroprene rubber was found to be effective.

Diagnóstico de las relaciones bilaterales entre Colombia y República Dominicana en torno al tema del narcotráfico desde 1998 hasta el 2010

El tema del narcotráfico ha sido ampliamente tratado, así como el caso de las drogas en Colombia, pero la afectación de dicho problema no ha sido analizada desde la República Dominicana y mucho menos desde la relación bilateral entre esta y Colombia. Aunque el tema es de gran relevancia en la agenda internacional, así como en la agenda interna de cada uno de estos Estados, no es el tema principal en la relación bilateral, donde los asuntos comerciales tienen mayor importancia, aún cuando hay ciertos mecanismos que buscan eliminar el tráfico ilegal de estupefacientes. En esta investigación, se busca dar un diagnóstico de las relaciones bilaterales y de aquellos instrumentos existentes, específicamente aquellos implementados desde la acogida internacional del término responsabilidad compartida en el año 1998 hasta el año 2010, para determinar la efectividad de los mismos y de aquellos factores que no son precisamente resultantes de las relaciones bilaterales pero que sí afectan de una u otra manera el tráfico de drogas ilegales entre estos dos países. Así, se buscará encontrar las debilidades, en los instrumentos bilaterales entre Colombia y República Dominicana y hacer recomendaciones para hacerlos más efectivos.

Análisis de la política prohibicionista de Estados Unidos hacia Colombia en el tema de las drogas ilícitas

El análisis de la política exterior de EE.UU hacia Colombia en el tema de las drogas ilícitas, revela en qué consiste el prohibicionismo y cuáles han sido sus resultados en Colombia y los países vecinos.

Los horarios laborales y su influencia en la percepción del equilibro trabajo-familia

Conciliar el trabajo y la familia es una lucha cotidiana que cada persona realiza para satisfacer las exigencias de ambas dimensiones de su vida. El no tener consciencia del problema que surge en el empleado para lograr esta conciliación y la ausencia de soluciones eficaces a éste, no sólo afecta a la organización a través de la baja productividad, el absentismo, el aumento del estrés, entre otros efectos; sino también a la vida familiar, social, física y psicológica del trabajador. Es por ello, que este proyecto de grado busca a partir de la revisión de la literatura mostrar cómo la percepción que tienen los trabajadores de su equilibrio trabajo-familia, se ve influenciada por un factor organizativo, como lo son los turnos laborales; además evidenciar las soluciones que se han implementado en las diferentes empresas de manera exitósa, para finalmente plantear estrategias que se puedan aplicar en las organizaciones facilitando el equilibrio trabajo-familia de los trabajadores.

Caracterización de las principales cadenas agroalimentarias en Argentina y Brasil

Cada día es mayor la demanda de alimentos a nivel mundial y menor su oferta debido a múltiples razones, por eso que es de gran importancia encontrar las mejores prácticas para que la cadena de suministro de productos alimenticios sea más eficiente y productiva, no sólo con el fin de llegar a la mayor población posible, sino también de mejorar los rendimientos de cada uno de los participantes de la misma. Este proyecto busca analizar las tres principales cadenas agroalimentarias de Argentina y Brasil, con el fin de determinar su desempeño actual, su grado de madurez y su productividad; para lograr esto, primero se va a levantar la información pertinente al tema, luego se identificarán las mejores prácticas en la cadena de suministro para los tres productos más importantes de la canasta básica de ambos países, posteriormente se analizará el desempeño de las agrocadenas y por último se determinará la madurez y productividad de las mismas. La metodología utilizada en este documento se basa principalmente en la búsqueda de información en fuentes gubernamentales y oficiales de cada país para obtener información verídica, confiable y actualizada. Estas fuentes nos aportarán la información que junto con un análisis propio permitirá cumplir los objetivos del proyecto. El resultado de estos datos es de gran importancia, ya que con la investigación realizada se podrán identificar las buenas prácticas para enriquecer el análisis o identificar las malas prácticas y así, proponer modelos que permitan el manejo eficiente de las agrocadenas buscando su desarrollo y perdurabilidad.

Logística humanitaria en las agrocadenas en América Latina

Entre muchas de las preocupaciones en el ámbito internacional está la desnutrición y la desigualdad social, por eso, esta investigación propone la logística humanitaria como herramienta para hacer más eficientes las Agrocadenas de suministro llegando de esta forma a las poblaciones más vulnerables. Gracias a esto, nace este proyecto a nivel internacional Con alianzas de Universidades en Colombia y Argentina. Para esta investigación es necesario responder preguntas como: ¿Qué es la Logística humanitaria? ¿Cuál es el alcance de la logística humanitaria? ¿Qué es una Agrocadenas? ¿Cómo se pueden optimizar las Agrocadenas a partir de la logística humanitaria? ¿Qué impacto tendría en Latinoamérica la mejora en los procesos de las Agrocadenas? Por Ultimo es importante resaltar, que en este proyecto se hará la caracterización de las Agrocadenas de tres productos importantes para la economía de los países anteriormente mencionados: maíz, arroz y trigo; se visualizaran sus puntos fuertes y débiles y así, lograr tener un mejor enfoque en cuanto los puntos más importantes a optimizar en toda la cadena.