Reading is now 'cool': a study of English teachers' perspectives on e-reading devices as a challenge and an opportunity

E-reading devices such as The Kindle have rapidly secured a significant place in a number of societies as at least one major platform for reading. To some extent they are part of the overarching move towards a fully digitised world but they have a distinctiveness in being deliberately “book-like”. Teachers generally have some suspicion towards “New Media”, especially when it challenges their established practice and nothing dominates the school more than the physical book. What may be the challenges but also the benefits of e-readers to teachers and students? What may be the particular challenges to those teachers who are, traditionally, the guardians of the book, that is the teachers of mother tongue literature? This article reports on a survey of English teachers in England to gauge their reactions to e-readers, both personally and professionally and describes their speculations about the place of e-readers in schools in the future. There is a mixed reaction with some teachers concerned about the demise of the book and the potential negative impact on reading. However, the majority welcome e-readers as a dynamic element within the reading environment with particular potential to enthuse reluctant readers and those with special or linguistic needs. They also, some grudgingly, view the fact that reading using this form of technology appeals to the “e-generation” and may succeed in making reading “cool”. This form of technology is, ironically (given that it appears to threaten traditional books) likely to be rapidly adopted in classrooms.

Sarah Kane: Cool Britannia’s reluctant feminist

Aleks Sierz in his important survey of mid 1990s drama has identified the plays of Sarah Kane as exemplars of what he terms ‘In-Yer Face’ theatre. Sierz argues that Kane and her contemporaries such as Mark Ravenhill and Judy Upton represent a break with the ideological concerns of the previous generation of playwrights such as Doug Lucie and Stephen Lowe, whose work was shaped through recognizable political concerns, often in direct opposition to Thatcherism. In contrast Sarah Kane and her generation have frequently been seen as literary embodiments of ‘Thatcher’s Children’, whereby following the fall of the Berlin Wall and the inertia of the Major years, their drama eschews a recognizable political position, and seems more preoccupied with the plight of individuals cut adrift from society. In the case of Sarah Kane her frequently quoted statement, ‘I have no responsibility as a woman writer because I don’t believe there’s such a thing’, has compounded this perception. Moreover, its dogmatism also echoes the infamous comments attributed to Mrs Thatcher regarding the role of the individual to society. However, this article seeks to reassess Kane’s position as a woman writer and will argue that her drama is positioned somewhere between the female playwrights who emerged after 1979 such as Sarah Daniels, Timberlake Wertenbaker and Clare McIntyre, whose drama was distinguished by overtly feminist concerns, and its subsequent breakdown, best exemplified by the brief cultural moment associated with the newly elected Blair government known as ‘Cool Britannia’. Drawing on a variety of sources, including Kane’s unpublished monologues, written while she was a student just after Mrs Thatcher left office, this paper will argue that far from being an exponent of post-feminism, Kane’s drama frequently revisits and is influenced by the generation of dramatists whose work was forged out the sharp ideological positions that characterized the 1980s and a direct consequence of Thatcherism.

Study on the application of cool paintings for the passive cooling of existing buildings in Mediterranean climates

Building roofs play a very important role in the energy balance of buildings, especially in summer, when they are hit by a rather high solar irradiance. Depending on the type of finishing layer, roofs can absorb a great amount of heat and reach quite high temperatures on their outermost surface, which determines significant room overheating. However, the use of highly reflective cool materials can help to maintain low outer surface temperatures; this practice may improve indoor thermal comfort and reduce the cooling energy need during the hot season.This technology is currently well known and widely used in the USA, while receiving increasing attention in Europe. In order to investigate the effectiveness of cool roofs as a passive strategy for passive cooling in moderately hot climates, this paper presents the numerical results of a case study based on the dynamic thermal analysis of an existing office building in Catania (southern Italy, Mediterranean area). The results show how the application of a cool paint on the roof can enhance the thermal comfort of the occupants by reducing the operative temperatures of the rooms and to reduce the overall energy needs of the building for space heating and cooling.

Cool roofs for passive cooling: performance in different climates and for different insulation levels in Italy

Roofs are severely hit by solar radiation in summer; hence the use of cool materials on the finishing layer provides a significant reduction in the heat flow entering the building, with sensible attenuation in the building cooling load. In this paper, a case study is presented, based on the dynamic simulation of an existing office building in Catania (southern Italy). Here, a part of the roof has been recently treated with a commercial cool paint, with the aim of improving thermal comfort in summer. Hence, the simulations represent a preliminary study that will allow assessing the expected effectiveness of the intervention. More in detail, the results of the simulations will be discussed in terms of both thermal comfort and energy savings, through the evaluation of parameters such as the roof surface temperature, the operative temperature and the cooling load for both conditions, i.e. with and without the cool paint. The paper also discusses the potential increase in the energy needs for winter heating, and looks at the overall annual balance in terms of primary energy; this is made by considering different climatic conditions and envelope characteristics. These aspects are usually not well highlighted in the current scientific literature.

Energy savings in buildings or UHI mitigation? Comparison between green roofs and cool roofs

The intensification of the Urban Heat Island effect (UHI) is a problem that involves several fields, and new adequate solutions are required to mitigate its amplitude. The construction sector is strictly related with this phenomenon; in particular, roofs are the envelope components subject to the highest solar irradiance, hence any mitigation strategy should start from them and involve their appropriate design process. For this purpose, cool materials, i.e. materials which are able to reflect a large amount of solar radiation and avoid overheating of building surfaces have been deeply analyzed in the last years both at building and urban scales, showing their benefits especially in hot climates. However, green roofs also represent a possible way to cope with UHI, even if their design is not straightforward and requires taking into account many variables, strictly related with the local climatic conditions. In this context, the present paper proposes a comparison between cool roofs and green roofs for several Italian cities that are representative of different climatic conditions. In search of the most effective solution, the answers may be different depending on the perspective that leads the comparison, i.e. the need to reduce the energy consumption in buildings or the desire to minimize the contribution of the UHI effect.

Proper evaluation of the external convective heat transfer for the thermal analysis of cool roofs

Cool materials are characterized by high solar reflectance and high thermal emittance; when applied to the external surface of a roof, they make it possible to limit the amount of solar irradiance absorbed by the roof, and to increase the rate of heat flux emitted by irradiation to the environment, especially during nighttime. However, a roof also releases heat by convection on its external surface; this mechanism is not negligible, and an incorrect evaluation of its entity might introduce significant inaccuracy in the assessment of the thermal performance of a cool roof, in terms of surface temperature and rate of heat flux transferred to the indoors. This issue is particularly relevant in numerical simulations, which are essential in the design stage, therefore it deserves adequate attention. In the present paper, a review of the most common algorithms used for the calculation of the convective heat transfer coefficient due to wind on horizontal building surfaces is presented. Then, with reference to a case study in Italy, the simulated results are compared to the outcomes of a measurement campaign. Hence, the most appropriate algorithms for the convective coefficient are identified, and the errors deriving by an incorrect selection of this coefficient are discussed.

The urban cool island phenomenon in a high-rise high-density city and its mechanisms

The urban heat island (UHI) phenomenon has been studied extensively, but there are relatively fewer reports on the so-called urban cool island (UCI) phenomenon. We reveal here that the UCI phenomenon exists in Hong Kong during the day, and is associated with the UHI at night under all wind and cloud conditions. The possible mechanisms for the UCI phenomenon in such a high-rise compact city have been discovered using a lumped urban air temperature model. A new concept of urban cool island degree hours (UCIdh) to measure the UCI intensity and duration is proposed. Our analyses reveal that when anthropogenic heat is small or absent, a high-rise and high-density city experiences a significant daytime UCI effect. This is explained by an intensified heat storage capacity and the reduced solar radiation gain of urban surfaces. However, if anthropogenic heat in the urban area increases further, the UCI phenomenon still exists, yet UCIdh decrease dramatically in a high-rise compact city. In a low-rise, low-density city, the UCI phenomenon also occurs when there is no anthropogenic heat, but easily disappears when there is little anthropogenic heat, and the UHI phenomenon dominates. This probably explains why the UHI phenomenon is often observed, but the UCI phenomenon is rarely observed. The co-existence of urban heat/cool island phenomena implies reduction of the daily temperature range (DTR) in such cities, and its dependence on urban morphology also implies that urban morphology can be used to control the urban thermal environment.

Cool Roofs for improving thermal performance of EU office buildings: an investigation for different climates and building layouts

Cool materials are characterized by having a high solar reflectance r – which is able to reduce heat gains during daytime - and a high thermal emissivity ε that enables them to dissipate the heat absorbed throughout the day during night. Despite the concept of cool roofs - i.e. the application of cool materials to roof surfaces - is well known in US since 1990s, many studies focused on their performance in both residential and commercial sectors under various climatic conditions for US countries, while only a few case studies are analyzed in EU countries. The present work aims at analyzing the thermal benefits due to their application to existing office buildings located in EU countries. Indeed, due to their weight in the existing buildings stock, as well as the very low rate of new buildings construction, the retrofit of office buildings is a topic of great concern worldwide. After an in-depth characterization of the existing buildings stock in the EU, the book gives an insight into roof energy balance due to different technological solutions, showing in which cases and to what extent cool roofs are preferable. A detailed description of the physical properties of cool materials and their availability on the market provides a solid background for the parametric analysis carried out by means of detailed numerical models that aims at evaluating cool roofs performance for various climates and office buildings configurations. With the help of dynamic simulations, the thermal behavior of representative office buildings of the existing EU buildings stock is assessed in terms of thermal comfort and energy needs for air conditioning. The results, which consider several variations of building features that may affect the resulting energy balance, show how cool roofs are an effective strategy for reducing overheating occurrences and thus improving thermal comfort in any climate. On the other hand, potential heating penalties due to a reduction in the incoming heat fluxes through the roof are taken into account, as well as the aging process of cool materials. Finally, an economic analysis of the best performing models shows the boundaries for their economic convenience.

Colonisation by epibionts and meiofauna of real and mimic pneumatophores in a cool temperate mangrove habitat

The size and pace of change in meiofaunal assemblages suggest that meiofauna make excellent subjects for testing theories about how ecological communities change. A field experiment was performed in which the  abundance and composition of epibionts and meiofauna on natural,  transplanted and mimic pneumatophores were monitored over a 47 wk period. Meiofaunal density increased with growth of algal epibionts, both reaching maximum values after 24 wk, at the end of winter. At this time the assemblages from the 3 substrata were similar, although the combined abundances of meiofauna on transplants and mimics were only 28% of the average on natural pneumatophores. Meiofaunal abundance on all substrata decreased rapidly during spring as algal cover declined due to desiccation. Twenty-three species of nematode were recorded from mimics compared with 8 and 7 from transplants and pneumatophores, respectively. A temporal sequence of feeding groups occurred in the order of epigrowth feeders, deposit feeders, and omnivore/predators, with the latter 2 adding to rather than replacing earlier trophic groups. Scavengers were found only on natural pneumatophores. The turnover rates of nematode species between all census times were similar, peaking at 63%, but there was no trend in the turnover rates with time. We conclude that mimics are more suitable than transplanted pneumatophores for colonisation studies because of their greater persistence and more easily standardised surface area. Moreover, the composition of colonising assemblages on them closely resembled assemblages on natural pneumatophores at the time of peak meiofaunal abundance.

Meiofaunal recruitment to mimic pneumatophores in a cool-temperate mangrove forest: spatial context and biofilm effects

A field experiment was devised to test whether meiofauna that colonised mimic pneumatophores (artificial substrates) resembled the assemblage on adjacent live pneumatophores in three randomly chosen intertidal, estuarine sites. The experiment showed that the close proximity of particular biota on living pneumatophores did not reliably influence subsequent development of assemblages upon mimic pneumatophores within a scale of 10 m during a colonisation period of less than 20 weeks. There was some convergence of the composition of the colonising assemblage of meiofauna on mimic pneumatophores with the local assemblages in sites dominated by barnacles, or where the natural pneumatophores were free from macroscopic epibionts. However, tychopelagic meiofauna from algal epiphytes did not significantly colonise mimic pneumatophores during the 20-week trial, probably due a lack of growing algae. During the conditioning phase suspended in water at a marine site 20 km from the mangroves, mimic pneumatophores acquired an assemblage of meiofauna different from the estuarine assemblage that colonised mimics following implantation in the estuarine mudflat. Enhanced colonisation rates of mimics in suspended bags at the conditioning site may be explained by the absence of benthic macroinvertebrates, and the lack of intertidal exposure. Biofilms aged 2, 7, and 11 weeks had no consistent, different effect on the subsequent colonisation of meiofauna. We conclude that divergence of phytal-based assemblages of meiofauna depends upon the amount of coverage, as well as the type, of fouling macro-epibionts on the pneumatophores. Meiofaunal assemblages on artificial substrates after 20 weeks colonisation displayed less intrinsic patchiness than mature phytal assemblages on natural pneumatophores, and so present a potentially useful way of improving the power of biomonitoring applications using meiofauna.

Epiphytic bryophytes of Dicksonia antarctica Labill. from selected pockets of cool temperate rainforest, Central Highlands, Victoria

Epiphytic bryophytes of the Soft Tree-fern Dicksonia antarctica Labill. were examined in four Cool Temperate Rainforest pockets of the Central Highlands of Victoria. Thirty-two species, 17 mosses and 15 liverworts, were noted. There was no distinction in species assemblage between the north and south side of tree-ferns although bryophytes occurred on the south side of more tree-ferns than they did on the north side.

Epiphytes on Nothofagus cunninghamii and Eucalyptus regnans in a Victorian cool temperate rainforest

This study investigated the epiphytic communities on Myrtle Beech Nothofagus cunninghamii (Hook.) Oerst. and Mountain Ash Eucalyptus regnans F.Muell. trees in a pocket of Cool Temperate Rainforest in the Yarra Ranges National Park, Victoria, Australia. Twenty species were identified growing on N. cunninghamii, with nine species found on E. regnans. The dominant epiphytes were the moss Dicranoloma menziesii on N. cunninghamii, and the liverwort Bazzania adnexa var. adnexa on E. regnans.

Cool temperate rainforest Lichens of Victoria, Australia: floristics and distribution

Lichen floristics and distribution were examined in cool temperate rainforests of Victoria, Australia. Forty sites were sampled, ten from each of the Otways, Yarra Ranges, Baw Baw, and Errinundra regions. A total of 165 lichen species were recorded, representing 38 fam- ilies. Seventeen species are new for Victoria. Non-metric Multidimensional Scaling showed three lichen groups that corresponded with the rainforest types in which they occurred. A sub-group of lichen species were considered widespread and represented the core of Victoria's rainforest lichen flora.