Multiscale fabrication of functional materials for life sciences

Regenerative medicine claims for a better understanding of the cause-effect relation between cell behaviour and environment signals. The latter encompasses topographical, chemical and mechanical stimuli, electromagnetic fields, gradients of chemo-attractants and haptotaxis. In this perspective, a spatial control of the structures composing the environment is required. In this thesis I describe a novel approach for the multiscale patterning of biocompatible functional materials in order to provide systems able to accurately control cell adhesion and proliferation. The behaviour of different neural cell lines in response to several stimuli, specifically chemical, topographical and electrical gradients is presented. For each of the three kind of signals, I chose properly tailored materials and fabrication and characterization techniques. After a brief introduction on the state of art of nanotechnology, nanofabrication techniques and regenerative medicine in Chapter 1 and a detailed description of the main fabrication and characterization techniques employed in this work in Chapter 2, in Chapter 3 an easy route to obtain accurate control over cell proliferation close to 100% is described (chemical control). In Chapter 4 (topographical control) it is shown how the multiscale patterning of a well-established biocompatible material as titanium dioxide provides a versatile and robust method to study the effect of local topography on cell adhesion and growth. The third signal, viz. electric field, is investigated in Chapter 5 (electrical control), where the very early stages of neural cell adhesion are studied in the presence of modest steady electric fields. In Chapter 6 (appendix) a new patterning technique, called Lithographically Controlled Etching (LCE), is proposed. It is shown how LCE can provide at the same time the micro/nanostructuring and functionalization of a surface with nanosized objects, thus being suitable for applications both in regenerative medicine in biosensing.

Use of complementary and alternative medicine and quality of life: changes at the end of life

The purpose of this study was to compare the physical, psychological and social dimensions associated with quality-of-life outcomes over the last year of life, between advanced cancer users and nonusers of complementary and alternative medicine. One hundred and eleven patients were identified through Queensland Cancer Registry records, and followed up every four to six weeks until close to death using standardized protocols. Outcome measures were symptom burden, psychological distress, subjective wellbeing, satisfaction with conventional medicine and need for control over treatment decisions. At the initial interview, 36 (32%) participants had used complementary/ alternative medicine the previous week; mainly vitamins, minerals and tonics and herbal remedies. Among all participants, 53 (48%) used at least one form of complementary/ alternative medicine over the study period. Only six (11%) visited alternative practitioners on a regular basis. Overall, complementary/ alternative medicine users reported higher levels of anxiety and pain, less satisfaction with conventional medicine and lower need for control over treatment decisions compared with nonusers. These differences tend to change as death approaches. A more rigorous assessment of complementary/ alternative medicine use, psychological distress, pain and subjective wellbeing among patients with advanced cancer is needed in the clinical setting.

Every child a wanted child: mid-life women's experiences of contraception

This paper is based on qualitative research which found that the contraceptive pill had achieved a "hegemonic status" among some British women in their thirties. In addition, despite the risk of sexually transmitted diseases, the idea of using condoms was very unpopular, and the research suggests that this is linked to a reluctance to rely on male cooperation over contraception. This paper will further argue that the women generally chose methods that they felt would be in their own best interests, and were often exercising considerable agency within the constraints of their relationships. Moreover, by accepting the responsibility for contraception, the women not only gained sole control over their fertility, but contraception may be an area within heterosexuality where women can exercise power.

(S)excerpts from a Life Told:sex, gender and learning lisability

This is an article about Sarah’s sexual teenage journey, seen through the lens of her mother, the author. It tackles learning disability, sexual experimentation, education, governance and responsibility. By using an autoethnographical method the article speaks personally to these intimate lived experiences and yet broadly and contextually these issues can give further insight into the difficult social processes that permeate surveillance and control, of sexual activity amongst a particular group of adults (young, learning disabled), by way of legal practice and sex education; family practices and the negotiation of power and control over sexual activity; and sexual citizenship and rights to a sexual identity.

Communication Architecture Design for Real-Time Networked Control Systems

Networked control over data networks has received increasing attention in recent years. Among many problems in networked control systems (NCSs) is the need to reduce control latency and jitter and to deal with packet dropouts. This paper introduces our recent progress on a queuing communication architecture for real-time NCS applications, and simple strategies for dealing with packet dropouts. Case studies for a middle-scale process or multiple small-scale processes are presented for TCP/IP based real-time NCSs. Variations of network architecture design are modelled, simulated, and analysed for evaluation of control latency and jitter performance. It is shown that a simple bandwidth upgrade or adding hierarchy does not necessarily bring benefits for performance improvement of control latency and jitter. A co-design of network and control is necessary to maximise the real-time control performance of NCSs

From emotional suppression to regulated empathy : the changing face of control in the CES

Between the 1970s and the 1990s the level and type of emotionality in the Commonwealth Employment Service (the Australian national employment service) altered. Within a context of changing economic conditions and concomitant work intensification, it is argued that untenable working conditions resulted in new recruits adopting a coping strategy that led to the use rather than the suppression of emotions. The use of emotions provided workers with job satisfaction and greater control over service interactions. Management subsequently commandeered the use of emotions to complement the introduction of private sector management techniques and service delivery reforms, regaining control over worker-client interactions.

The exploration of consumer power in online brand communities : a comparison case study in Australia and China

Aided by the development of information technology, the balance of power in the market place is rapidly shifting from marketers towards consumers and nowhere is this more obvious than in the online environment (Denegri-Knott, Zwick, & Schroeder, 2006; Moynagh & Worsley, 2002; Newcomer, 2000; Samli, 2001). From the inception and continuous development of the Internet, consumers are becoming more empowered. They can choose what they want to click on the Internet, they can shop and transact payments, watch and download video, chat with others, be it friends or even total strangers. Especially in online communities, like-minded consumers share and exchange information, ideas and opinions. One form of online community is the online brand community, which gathers specific brand lovers. As with any social unit, people form different roles in the community and exert different effects on each other. Their interaction online can greatly influence the brand and marketers. A comprehensive understanding of the operation of this special group form is essential to advancing marketing thought and practice (Kozinets, 1999). While online communities have strongly shifted the balance of power from marketers to consumers, the current marketing literature is sparse on power theory (Merlo, Whitwell, & Lukas, 2004). Some studies have been conducted from an economic point of view (Smith, 1987), however their application to marketing has been limited. Denegri-Knott (2006) explored power based on the struggle between consumers and marketers online and identified consumer power formats such as control over the relationship, information, aggregation and participation. Her study has built a foundation for future power studies in the online environment. This research project bridges the limited marketing literature on power theory with the growing recognition of online communities among marketing academics and practitioners. Specifically, this study extends and redefines consumer power by exploring the concept of power in online brand communities, in order to better understand power structure and distribution in this context. This research investigates the applicability of the factors of consumer power identified by Denegri-Knott (2006) to the online brand community. In addition, by acknowledging the model proposed by McAlexander, Schouten, & Koenig (2002), which emphasized that community study should focus on the role of consumers and identifying multiple relationships among the community, this research further explores how member role changes will affect power relationships as well as consumer likings of the brand. As a further extension to the literature, this study also considers cultural differences and their effect on community member roles and power structure. Based on the study of Hofstede (1980), Australia and China were chosen as two distinct samples to represent differences in two cultural dimensions, namely individualism verses collectivism and high power distance verses low power distance. This contribution to the research also helps answer the research gap identified by Muñiz Jr & O'Guinn (2001), who pointed out the lack of cross cultural studies within the online brand community context. This research adopts a case study methodology to investigate the issues identified above. Case study is an appropriate research strategy to answer “how” and “why” questions of a contemporary phenomenon in real-life context (Yin, 2003). The online brand communities of “Haloforum.net” in Australia and “NGA.cn” in China were selected as two cases. In-depth interviews were used as the primary data collection method. As a result of the geographical dispersion and the preference of a certain number of participants, online synchronic interviews via MSN messenger were utilized along with the face-to-face interviews. As a supplementary approach, online observation was carried over two months, covering a two week period prior to the interviews and a six week period following the interviews. Triangulation techniques were used to strengthen the credibility and validity of the research findings (Yin, 2003). The findings of this research study suggest a new definition of power in an online brand community. This research also redefines the consumer power types and broadens the brand community model developed by McAlexander et al. (2002) in an online context by extending the various relationships between brand and members. This presents a more complete picture of how the perceived power relationships are structured in the online brand community. A new member role is discovered in the Australian online brand community in addition to the four member roles identified by Kozinets (1999), in contrast however, all four roles do not exist in the Chinese online brand community. The research proposes a model which links the defined power types and identified member roles. Furthermore, given the results of the cross-cultural comparison between Australia and China showed certain discrepancies, the research suggests that power studies in the online brand community should be country-specific. This research contributes to the body of knowledge on online consumer power, by applying it to the context of an online brand community, as well as considering factors such as cross cultural difference. Importantly, it provides insights for marketing practitioners on how to best leverage consumer power to serve brand objective in online brand communities. This, in turn, should lead to more cost effective and successful communication strategies. Finally, the study proposes future research directions. The research should be extended to communities of different sizes, to different extents of marketer control over the community, to the connection between online and offline activities within the brand community, and (given the cross-cultural findings) to different countries. In addition, a greater amount of research in this area is recommended to determine the generalizability of this study.

Strategies for zonal cartilage repair using hydrogels

Articular cartilage is a highly hydrated tissue with depth-dependent cellular and matrix properties that provide low-friction load bearing in joints. However, the structure and function are frequently lost and there is insufficient repair response to regenerate high-quality cartilage. Several hydrogel-based tissue-engineering strategies have recently been developed to form constructs with biomimetic zonal variations to improve cartilage repair. Modular hydrogel systems allow for systematic control over hydrogel properties, and advanced fabrication techniques allow for control over construct organization. These technologies have great potential to address many unanswered questions involved in prescribing zonal properties to tissue-engineered constructs for cartilage repair.

Is implementing criterion-referenced assessment worth the effort with gen Y?

Well implemented criterion-referenced assessment (CRA) requires dedicated time and effort, especially in describing realistic expectations of evidence of achievement to students in the form of criteria sheets (or grading rubrics). It is also takes time out of delivering content to teach students how to judge their own work using criteria sheets. In 2007, to engage third year Microbiology students in using criteria sheets for the first time in their degree, we devised an innovative assessment tutorial supported by online resources. We were sceptical of much of the literature that reported ‘agreed’ characteristics of our predominantly gen Y cohort, because of the older ages of the majority of authors. These authors claim gen Y has a propensity for digital media, overconfidence in their own abilities and a collaborative orientation. We rejected this stereotype when developing the tutorial. Evaluations by students were positive and there was no dramatic change to grades for the unit. These results are similar to those in the literature for non gen Y cohorts. This lends support to our claim that giving students control over their own learning, irrespective of their generational label, is worth the time and effort.

Men's intimate partner abuse and control : reconciling paradoxical masculinities and social contradictions

Intimate partner abuse and control is one of the most common forms of violence against women, and is considered an international problem of social, political, legal and human rights significance. Yet few studies have attempted to understand this problem from the perspective of male perpetrators. This gap is addressed by conducting in-depth interviews with 16 able-bodied men of white European ancestry born and educated in New Zealand or Australia, who have been physically violent and/or emotionally, intellectually, sexually or financially controlling of a live-in female partner. This thesis extends and deepens the dominant ways of thinking about men’s intimate partner abuse by utilising a new theoretical framework compatible with contemporary feminist scholarship. A synthesis of Connell’s theory of masculinities and Bourdieu’s field theory is utilised for the purpose of exploring more nuanced, complex understandings of manliness and men’s relationships with men, women and social structures. Through such an analysis, this thesis finds that men’s perpetration of power and control over women is driven by a need to avoid the stigma of appearing weak. As a consequence, their desire and ability to show love, care and empathy is suppressed in favour of a presumed honourable manliness, and their female partners are used as weapons in the pursuit of symbolic capital in the form of recognition, prestige and acceptance from real and/or imagined men. This research also uncovers the complex interplay between masculine practices and particular social contexts. For example, the norms of practice encountered from those in authority, such as teachers, sports coaches, police, court judges and workplace management, influences the decision making of the men in this study, to use, or not to use, physical violence, psychological abuse and structural control. The principal conclusion is that there is a repertoire of paradoxical masculinities and contradictory social messages available to the men in this study. But gender policing by other men, complicit women and those in authority provides little room for legitimate complexity in masculine practices. Perpetrators in this study reconcile these conflicts of interest by generally avoiding subordinated masculinity and possible ostracism, and instead practicing more heroic hegemonic masculinities by abusing and controlling women and particular other men. This thesis concludes that for intimate partner abuse and control to cease, changes in power structures have to occur at all levels of society.

The high road or the low road? Alternatives for Australia's future

The OECD suggests that countries now have a choice. They can focus on development based on either:  competition via investment in technology and innovation - which is important in high knowledge industries and high innovation economies, or  competition via exchange rates and wages - which is important in industries producing standardised, lower-tech goods and services. The first route will maximise higher-skilled, higher-paid employment growth and living standards. Given the lack of control over the exchange rate, the second route requires competition based on wages. It is essential to understand that markets themselves won’t shift a country from one path to the other. These conclusions arise from the OECD’s recognition that technical progress - the creation of new products or the adoption of more efficient methods of production - is the main source of economic growth and enhanced quality of life. Technological change is, the OECD suggests, ...also the engine for job creation as higher wages and profits resulting from technology-induced productivity gains and lower prices lead to increased demand for new products from existing as well as new industries (1997: 4).Further, Competitiveness in high-technology industries is mainly driven by technology factors and much less by wage and exchange rate movements, while the reverse is true in low-technology industries (OECD 1996e: 12). The OECD has shown that sound macroeconomic conditions, such as the low inflation and reduced public sector debt visible in almost all member countries in the 1990s, are not enough to deal with high levels of unemployment and the need to increase levels of income: If economic performance is to improve, additional structural reform, which can increase innovation and the diffusion of technologies within and among national economies, seems necessary (OECD 1997: 4 Emphasis added).

Educational change and youth voice: Informing school action on cyberbullying

Change is a regular part of school life. Educational innovations are constantly being implements in order to benefit students, improve outcomes and meet the obligations and accountability demands of governments. Rapid social and technological change has occurred within and around schools during the past 15 or more years, impacting upon curricula and pedagogies. Simultaneously, there has been a trend towards incorporating youth voice, where young people share in the decisions that will impact on their school experiences (Mitra, 2008a, 2004). Most recently, with the advent of the first National Australian Curriculum (McGaw, 2010), there is an imposed curriculum change, which reflects the growing global trend towards centralised control over what students learn in school (Zhao, 2011) and highlights that schools have to respond to change from all levels. Spears (in press) also notes that parents are raising children in an increasingly wireless world which is far removed from the one in which they were raised. Educators are teaching in schools that are vastly different technologically from those they knew as children and adolescents, or even those in which they were teaching a decade ago. Children born in 1995, the year when the Internet was first commercialised, are 16 years old in 2011 and, whilst parents may have embraced technological advances in their own adult working or social lives, they are yet to fathom fully what it means for their children and their relationships: to be educated and to socialise in the midst of mobile social media. Young people have greater access to more information than at any time past and move seamlessly between online and offline environments, often referring to them as ‘the same life’ (Spears, Kofoed, Bartolo, Palermiti and Castabile, in press). Along with these changes has come the transformation of traditional forms of bullying to cyberbullying, amid the public perception that bullying generally is becoming worse in schools.

Flexible high voltage pulsed power supply for plasma applications

Demands for delivering high instantaneous power in a compressed form (pulse shape) have widely increased during recent decades. The flexible shapes with variable pulse specifications offered by pulsed power have made it a practical and effective supply method for an extensive range of applications. In particular, the release of basic subatomic particles (i.e. electron, proton and neutron) in an atom (ionization process) and the synthesizing of molecules to form ions or other molecules are among those reactions that necessitate large amount of instantaneous power. In addition to the decomposition process, there have recently been requests for pulsed power in other areas such as in the combination of molecules (i.e. fusion, material joining), gessoes radiations (i.e. electron beams, laser, and radar), explosions (i.e. concrete recycling), wastewater, exhausted gas, and material surface treatments. These pulses are widely employed in the silent discharge process in all types of materials (including gas, fluid and solid); in some cases, to form the plasma and consequently accelerate the associated process. Due to this fast growing demand for pulsed power in industrial and environmental applications, the exigency of having more efficient and flexible pulse modulators is now receiving greater consideration. Sensitive applications, such as plasma fusion and laser guns also require more precisely produced repetitive pulses with a higher quality. Many research studies are being conducted in different areas that need a flexible pulse modulator to vary pulse features to investigate the influence of these variations on the application. In addition, there is the need to prevent the waste of a considerable amount of energy caused by the arc phenomena that frequently occur after the plasma process. The control over power flow during the supply process is a critical skill that enables the pulse supply to halt the supply process at any stage. Different pulse modulators which utilise different accumulation techniques including Marx Generators (MG), Magnetic Pulse Compressors (MPC), Pulse Forming Networks (PFN) and Multistage Blumlein Lines (MBL) are currently employed to supply a wide range of applications. Gas/Magnetic switching technologies (such as spark gap and hydrogen thyratron) have conventionally been used as switching devices in pulse modulator structures because of their high voltage ratings and considerably low rising times. However, they also suffer from serious drawbacks such as, their low efficiency, reliability and repetition rate, and also their short life span. Being bulky, heavy and expensive are the other disadvantages associated with these devices. Recently developed solid-state switching technology is an appropriate substitution for these switching devices due to the benefits they bring to the pulse supplies. Besides being compact, efficient, reasonable and reliable, and having a long life span, their high frequency switching skill allows repetitive operation of pulsed power supply. The main concerns in using solid-state transistors are the voltage rating and the rising time of available switches that, in some cases, cannot satisfy the application’s requirements. However, there are several power electronics configurations and techniques that make solid-state utilisation feasible for high voltage pulse generation. Therefore, the design and development of novel methods and topologies with higher efficiency and flexibility for pulsed power generators have been considered as the main scope of this research work. This aim is pursued through several innovative proposals that can be classified under the following two principal objectives. • To innovate and develop novel solid-state based topologies for pulsed power generation • To improve available technologies that have the potential to accommodate solid-state technology by revising, reconfiguring and adjusting their structure and control algorithms. The quest to distinguish novel topologies for a proper pulsed power production was begun with a deep and through review of conventional pulse generators and useful power electronics topologies. As a result of this study, it appears that efficiency and flexibility are the most significant demands of plasma applications that have not been met by state-of-the-art methods. Many solid-state based configurations were considered and simulated in order to evaluate their potential to be utilised in the pulsed power area. Parts of this literature review are documented in Chapter 1 of this thesis. Current source topologies demonstrate valuable advantages in supplying the loads with capacitive characteristics such as plasma applications. To investigate the influence of switching transients associated with solid-state devices on rise time of pulses, simulation based studies have been undertaken. A variable current source is considered to pump different current levels to a capacitive load, and it was evident that dissimilar dv/dts are produced at the output. Thereby, transient effects on pulse rising time are denied regarding the evidence acquired from this examination. A detailed report of this study is given in Chapter 6 of this thesis. This study inspired the design of a solid-state based topology that take advantage of both current and voltage sources. A series of switch-resistor-capacitor units at the output splits the produced voltage to lower levels, so it can be shared by the switches. A smart but complicated switching strategy is also designed to discharge the residual energy after each supply cycle. To prevent reverse power flow and to reduce the complexity of the control algorithm in this system, the resistors in common paths of units are substituted with diode rectifiers (switch-diode-capacitor). This modification not only gives the feasibility of stopping the load supply process to the supplier at any stage (and consequently saving energy), but also enables the converter to operate in a two-stroke mode with asymmetrical capacitors. The components’ determination and exchanging energy calculations are accomplished with respect to application specifications and demands. Both topologies were simply modelled and simulation studies have been carried out with the simplified models. Experimental assessments were also executed on implemented hardware and the approaches verified the initial analysis. Reports on details of both converters are thoroughly discussed in Chapters 2 and 3 of the thesis. Conventional MGs have been recently modified to use solid-state transistors (i.e. Insulated gate bipolar transistors) instead of magnetic/gas switching devices. Resistive insulators previously used in their structures are substituted by diode rectifiers to adjust MGs for a proper voltage sharing. However, despite utilizing solid-state technology in MGs configurations, further design and control amendments can still be made to achieve an improved performance with fewer components. Considering a number of charging techniques, resonant phenomenon is adopted in a proposal to charge the capacitors. In addition to charging the capacitors at twice the input voltage, triggering switches at the moment at which the conducted current through switches is zero significantly reduces the switching losses. Another configuration is also introduced in this research for Marx topology based on commutation circuits that use a current source to charge the capacitors. According to this design, diode-capacitor units, each including two Marx stages, are connected in cascade through solid-state devices and aggregate the voltages across the capacitors to produce a high voltage pulse. The polarity of voltage across one capacitor in each unit is reversed in an intermediate mode by connecting the commutation circuit to the capacitor. The insulation of input side from load side is provided in this topology by disconnecting the load from the current source during the supply process. Furthermore, the number of required fast switching devices in both designs is reduced to half of the number used in a conventional MG; they are replaced with slower switches (such as Thyristors) that need simpler driving modules. In addition, the contributing switches in discharging paths are decreased to half; this decrease leads to a reduction in conduction losses. Associated models are simulated, and hardware tests are performed to verify the validity of proposed topologies. Chapters 4, 5 and 7 of the thesis present all relevant analysis and approaches according to these topologies.

The role of physical activity in the lives of people with lymphoedema following cancer treatment : a social constructionist study

Lymphoedema is a chronic condition predominantly affecting the limbs, although it can involve the trunk and other areas of the body. It is characterised by swelling due to excess accumulation of fluid in body tissues. Secondary lymphoedema, which arises following cancer treatment, is the more common form of lymphoedema in developed countries. At least 20% of those diagnosed with the most common cancers will develop lymphoedema. This is a concern in Australia as incidence of these cancers is increasing. Cancer survival rates are also increasing. Currently, this equates to 9 300 new cases of secondary lymphoedema diagnosed each year. Considerable physical and psychosocial impacts of lymphoedema have been reported and its subsequent impact on health-related quality of life can exacerbate other side effects of cancer treatment. Exercise following cancer treatment has been shown to significantly reduce the impact of treatment side effects, improve quality of life and physical status. While participating in exercise does not increase risk nor exacerbate existing lymphoedema, reductions in incidence of lymphoedema exacerbations and associated symptoms have been observed in women participating in regular weight lifting following breast cancer treatment. Despite these benefits, lymphoedema prevention and management advice cautions people with lymphoedema against „repetitive use. or „overuse. of their affected arm. It is possible that this advice creates a barrier to participation in physical activity; however, little is known about the relationship between physical activity and lymphoedema. In addition, the majority of studies examining the experiences of people living with lymphoedema and the impact of the condition have been predominantly conducted internationally and have focused on women following breast cancer. This study sought to explore firstly, how men and women construct their experience of living with lymphoedema following treatment for a range of cancers in the context of everyday life in Australia; and secondly, to analyse the role of physical activity in the lives of those living with lymphoedema following cancer treatment. A social constructivist grounded theory approach was taken to explore these objectives as it is acknowledged that human actions and the meanings associated with these actions are influenced by the interaction between the self and the social world. It is also acknowledged that the research process itself is a social construction between the researcher and participant. Purposive sampling techniques were used to recruit a total of 29 participants from a variety of sources. Telephone interviews and focus groups were conducted to collect data. Data were concurrently collected and analysed and analysis was conducted using the constant comparative method. The core category that developed in objective one was „sense of self‟. The self was defined by perceptions participants held of themselves and their identity prior to a lymphoedema diagnosis and changes to their perceptions and identity since diagnosis. Three conceptual categories which related to each other and to „sense of self‟ were developed through the process of coding that represented the process of how participants constructed their experiences living with secondary lymphoedema in the context of everyday life. Firstly, altered normalcy reflected the physical and psychosocial changes experienced and the effect it had on their lives. Secondly, „accidental journey‟ reflected participants‟ journey with the heath care system prior to diagnosis through to longer term management. Thirdly, renegotiating control revealed participants perceived control over lymphoedema and their ability to participate in daily activities previously enjoyed. These findings revealed the failure of the broader health system to recognise the significant and chronic nature of a lymphoedema diagnosis following cancer treatment with greater understanding, knowledge and support from health professionals being needed. The findings also reveal access to health professionals trained in lymphoedema management, a comprehensive approach encompassing both physical and psychosocial needs and provision of practical and meaningful guidelines supported by scientific evidence would contribute to improved treatment and management of the condition. The key findings for objective two were that people with lymphoedema define physical activity in different ways. Physical activity post-diagnosis was perceived as important by most for a variety of reasons ranging from everyday functioning, to physical and psychosocial health benefits. Issues relating to the impact of lymphoedema on physical activity related to the impact on peoples‟ ability to be physically active, confusion about acceptable forms of physical activity and barriers that lymphoedema presented to being physically active. A relationship between how people construct their experiences with lymphoedema and the role of physical activity was also established. The contribution of physical activity to the lives of people living with lymphoedema following cancer treatment appeared to be influenced by their sense of self as socially constructed through their experiences prior to diagnosis and following diagnosis with lymphoedema. The influence of pre-lymphoedema habits, norms and beliefs suggests the importance of effective health promotion messages to encourage physical activity among the general population and specific messages and guidelines particular to the needs of those diagnosed with lymphoedema following cancer treatment. The influence of participant.s social constructions on the lymphoedema experience highlights the importance of improving interactions between the overall health care system and patients, providing a clear treatment plan, providing evidence-based and clear advice about participation in appropriate physical activity, which in doing so will limit the physical and psychosocial effect of lymphoedema and providing comprehensive physical and psychosocial support to those living with the condition and their families. This study has contributed to a deep understanding of people.s experiences with lymphoedema following cancer treatment and the role of physical activity in the context of daily life in Australia. Findings from this study lead to recommendations for advocacy, a comprehensive approach to diagnosis, treatment and management, and specific areas for future research.