Life cycle analysis of UK coal fired power plants

This paper examines the life cycle GHG emissions from existing UK pulverized coal power plants. The life cycle of the electricity Generation plant includes construction, operation and decommissioning. The operation phase is extended to upstream and downstream processes. Upstream processes include the mining and transport of coal including methane leakage and the production and transport of limestone and ammonia, which are necessary for flue gas clean up. Downstream processes, on the other hand, include waste disposal and the recovery of land used for surface mining. The methodology used is material based process analysis that allows calculation of the total emissions for each process involved. A simple model for predicting the energy and material requirements of the power plant is developed. Preliminary calculations reveal that for a typical UK coal fired plant, the life cycle emissions amount to 990 g CO2-e/kWh of electricity generated, which compares well with previous UK studies. The majority of these emissions result from direct fuel combustion (882 g/kWh 89%) with methane leakage from mining operations accounting for 60% of indirect emissions. In total, mining operations (including methane leakage) account for 67.4% of indirect emissions, while limestone and other material production and transport account for 31.5%. The methodology developed is also applied to a typical IGCC power plant. It is found that IGCC life cycle emissions are 15% less than those from PC power plants. Furthermore, upon investigating the influence of power plant parameters on life cycle emissions, it is determined that, while the effect of changing the load factor is negligible, increasing efficiency from 35% to 38% can reduce emissions by 7.6%. The current study is funded by the UK National Environment Research Council (NERC) and is undertaken as part of the UK Carbon Capture and Storage Consortium (UKCCSC). Future work will investigate the life cycle emissions from other power generation technologies with and without carbon capture and storage. The current paper reveals that it might be possible that, when CCS is employed. the emissions during generation decrease to a level where the emissions from upstream processes (i.e. coal production and transport) become dominant, and so, the life cycle efficiency of the CCS system can be significantly reduced. The location of coal, coal composition and mining method are important in determining the overall impacts. In addition to studying the net emissions from CCS systems, future work will also investigate the feasibility and technoeconomics of these systems as a means of carbon abatement.

Development of advanced tools and methods for the assessment and management of risk due to atypical major accident scenarios

Proper hazard identification has become progressively more difficult to achieve, as witnessed by several major accidents that took place in Europe, such as the Ammonium Nitrate explosion at Toulouse (2001) and the vapour cloud explosion at Buncefield (2005), whose accident scenarios were not considered by their site safety case. Furthermore, the rapid renewal in the industrial technology has brought about the need to upgrade hazard identification methodologies. Accident scenarios of emerging technologies, which are not still properly identified, may remain unidentified until they take place for the first time. The consideration of atypical scenarios deviating from normal expectations of unwanted events or worst case reference scenarios is thus extremely challenging. A specific method named Dynamic Procedure for Atypical Scenarios Identification (DyPASI) was developed as a complementary tool to bow-tie identification techniques. The main aim of the methodology is to provide an easier but comprehensive hazard identification of the industrial process analysed, by systematizing information from early signals of risk related to past events, near misses and inherent studies. DyPASI was validated on the two examples of new and emerging technologies: Liquefied Natural Gas regasification and Carbon Capture and Storage. The study broadened the knowledge on the related emerging risks and, at the same time, demonstrated that DyPASI is a valuable tool to obtain a complete and updated overview of potential hazards. Moreover, in order to tackle underlying accident causes of atypical events, three methods for the development of early warning indicators were assessed: the Resilience-based Early Warning Indicator (REWI) method, the Dual Assurance method and the Emerging Risk Key Performance Indicator method. REWI was found to be the most complementary and effective of the three, demonstrating that its synergy with DyPASI would be an adequate strategy to improve hazard identification methodologies towards the capture of atypical accident scenarios.

Mitigazione sequestro e stoccaggio di diossido di carbonio

The main objective of my thesis was the technical-economic feasibility of a system of electricity generation integrated with CCS. The policy framework for development processing is part of the recent attention that at the political level has been directed towards the use of CCS technologies with the aim of addressing the problems of actual climate change. Several technological options have been proposed to stabilize and reduce the atmospheric concentrations of carbon dioxide (CO2) among which, the most promising for IPPC (Intergovernmental Panel on Climate Change)are the CCS technologies (Carbon Capture and Storage & Carbon Capture and Sequestration). The remedy proposed for large stationary CO2 sources as thermoelectric power plants is to separate the flue gas capturing CO2 and to store it into deep subsurface geological formations (more than 800 meters of depth). In order to support the identification of potential CO2 storage reservoirs in Italy and in Europe by Geo Capacity(an European database) new studies are developing. From the various literature data analyzed shows that most of the CO2 emitted from large stationary sources comes from the processes of electricity generation (78% of total emissions) and from (about 60%) those using coal especially. The CCS have the objective of return "to the sender" , the ground, the carbon in oxidized form (CO2) after it has been burned by man starting from its reduced form (CH4, oil and coal), then the carbon dioxide is not a "pollutant" if injected into the subsurface, CO2 is an acid reagent that interacts with the rock, with underground fluid and the characteristics of the host rock. The results showed that the CCS technology are very urgent, because unfortunately there are too many industrial sources of CO2 in assets (power plants, refineries, cement plants, steel mills) in the world who are carrying too quickly the CO2 atmospheric concentration levels to values that aren't acceptable for our dear planet.

Table 6 Generalised properties of Utsira caprocks, based on analysis of cuttings (page 79)

Executive Summary: Carbon dioxide capture and storage (CCS) is one option for mitigating atmospheric emissions of carbon dioxide and thereby contributes in actions for stabilization of atmospheric greenhouse gas concentrations. The Bellona Foundation is striving to achieve wide implementation of carbon dioxide (CO2) capture and storage both in Norway and internationally. Bellona considers CCS as the only viable large scale option to close the gap between energy production and demand in an environmentally sound way, thereby ensuring that climate changes and acidification of the oceans due to increased CO2 concentrations in the atmosphere will be stabilised. ff

Effects of high temperature and CO2 on intracellular DMSP in the cold-water coral Lophelia pertusa

Significant warming and acidification of the oceans is projected to occur by the end of the century. CO2 vents, areas of upwelling and downwelling, and potential leaks from carbon capture and storage facilities may also cause localised environmental changes, enhancing or depressing the effect of global climate change. Cold-water coral ecosystems are threatened by future changes in carbonate chemistry, yet our knowledge of the response of these corals to high temperature and high CO2 conditions is limited. Dimethylsulphoniopropionate (DMSP), and its breakdown product dimethylsulphide (DMS), are putative antioxidants that may be accumulated by invertebrates via their food or symbionts, although recent research suggests that some invertebrates may also be able to synthesise DMSP. This study provides the first information on the impact of high temperature (12 °C) and high CO2 (817 ppm) on intracellular DMSP in the cold-water coral Lophelia pertusa from the Mingulay Reef Complex, Scotland (56°49' N, 07°23' W), where in situ environmental conditions are meditated by tidally induced downwellings. An increase in intracellular DMSP under high CO2 conditions was observed, whilst water column particulate DMS + DMSP was reduced. In both high temperature treatments, intracellular DMSP was similar to the control treatment, whilst dissolved DMSP + DMS was not significantly different between any of the treatments. These results suggest that L. pertusa accumulates DMSP from the surrounding water column; uptake may be up-regulated under high CO2 conditions, but mediated by high temperature. These results provide new insight into the biotic control of deep-sea biogeochemistry and may impact our understanding of the global sulphur cycle, and the survival of cold-water corals under projected global change.

Escenario de potenciales tecnologías limpias de carbón y evaluación de las iniciativas dereducción de CO2 en su aproximación a centrales de generación eléctrica de emisiones cero

Dentro del objetivo común que persigue alcanzar una estabilidad social y una economía de éxito sostenible en el actual e incierto contexto mundial, el pronóstico es que la demanda de energía siga aumentando y que la generación mundial de electricidad se duplique entre los años 2005 y 2030. En este escenario, los combustibles fósiles podrían mantener una contribución muy significativa al mix energético posiblemente hasta el año 2050, participando del mercado de generación de energía eléctrica mundial en aproximadamente un 70% y siendo base de la generación de energía eléctrica europea en un 60%. El carbón sin duda seguirá teniendo una contribución clave. Este incremento en la demanda energética y energía eléctrica, en el consumo de carbón y de combustibles fósiles en general, sin duda tendrá impacto sobre los niveles de concentración de CO2 a nivel global en los diferentes escenarios evaluados, con un fatal pronóstico de triplicar, si no se contiene de alguna manera su emisión, los niveles actuales de concentración de CO2 hasta valores próximos a 1.200 ppm para finales de este siglo XXI. El Protocolo de Kyoto, adoptado en 1997, fue el primer tratado de responsabilidad a nivel mundial para el monitoreo y limitación de las emisiones de CO2, realizando una primera aproximación hasta el año 2012 y tomando como valores de referencia los referidos a los niveles de concentración de gases de efecto invernadero registrados en 1990. Algunos de los principales países emisores de CO2 como USA y China no ratificaron los objetivos de límite de emisión y niveles de reducción de CO2, y sin embargo están tomando sus propias acciones y medidas en paralelo para reducir sus emisiones. Los procesos de combustión más eficientes y con menor consumo de combustible, proporcionan una significativa contribución del sector de generación eléctrica a la reducción de los niveles de concentración de CO2, pero podría no ser suficiente. Tecnologías de captura y almacenamiento de carbono (CCS, del inglés Carbon Capture and Storage) han comenzado a ganar más importancia desde principios de esta década, se ha intensificado la investigación y proliferado la creación de fondos que impulsen su desarrollo y estimulen su despliegue. Tras los primeros proyectos de investigación básica y ensayos a pequeña escala, casi embrionaria, tres procesos de captura se posicionan como los más viables actualmente, con potencial para alcanzar niveles de reducción de CO2 del 90%, mediante su aplicación en centrales de carbón para generación eléctrica. En referencia al último paso del esquema CCS en el proceso de reducción de las ingentes cantidades de CO2 que habría que eliminar de la atmósfera, dos opciones deberían ser consideradas: la reutilización (EOR y EGR) y el almacenamiento. El presente artículo evalúa el estado de las diferentes tecnologías de captura de CO2, su disponibilidad, su desarrollo y su coste de instalación estimado. Se incorpora un pequeño análisis de los costes de operación y varias extrapolaciones, dado que solo están disponibles algunos de estos datos hasta la fecha. Además este artículo muestra los principales hallazgos y los potenciales de reducción de emisiones de CO2 en la utilización del carbón para generar electricidad y proporciona una visión del desarrollo y despliegue actual de la tecnología. Se realiza una revisión de las iniciativas existentes a nivel mundial mediante proyectos de demostración orientados a la viabilidad comercial del esquema CCS para el período 2020 ? 2030. Se evalúan los diferentes programas en curso y sus avances, como el programa de UK, el EEPR (European Energy Program for Recovery), etc. Las principales fuentes empleadas en la elaboración de este artículo son el DOE, NETL, MIT, EPRI, Centros e Institutos de Investigación, Universidades Europeas, Administraciones Públicas y Agencias Internacionales, suministradores de tecnología crítica, compañías eléctricas (utilities) y empresas tecnológicas.

CO2and Rn degassing from the natural analog of Campo de Calatrava(Spain): Implications for monitoring of CO2storage sites

Natural analogs offer a valuable opportunity to investigate the long-term impacts associated with thepotential leakage in geological storage of CO2.Degassing of CO2and radon isotopes (222Rn?220Rn) from soil, gas vents and thermal water dischargeswas investigated in the natural analog of Campo de Calatrava Volcanic Field (CCVF; Central Spain) todetermine the CO2?Rn relationships and to assess the role of CO2as carrier gas for radon. Furthermore,radon measurements to discriminate between shallow and deep gas sources were evaluated under theperspective of their applicability in monitoring programs of carbon storage projects.CO2flux as high as 5000 g m?2d?1and222Rn activities up to 430 kBq m?3were measured;220Rn activi-ties were one order of magnitude lower than those of222Rn. The222Rn/220Rn ratios were used to constrainthe source of the Campo de Calatrava soil gases since a positive correlation between radon isotopic ratiosand CO2fluxes was observed. Thus, in agreement with previous studies, our results indicate a deepmantle-related origin of CO2for both free and soil gases, suggesting that carbon dioxide is an efficientcarrier for Rn. Furthermore, it was ascertained that the increase of222Rn in the soil gases was likely pro-duced by two main processes: (i) direct transport by a carrier gas, i.e., CO2and (ii) generation at shallowlevel due to the presence of relatively high concentrations of dissolved U and Ra in the thermal aquiferof Campo de Calatrava.The diffuse CO2soil flux and radon isotopic surveys carried out in the Campo de Calatrava VolcanicFields can also be applicable to geochemical monitoring programs in CCS (Carbon Capture and Storage)areas as these parameters are useful to: (i) constrain CO2leakages once detected and (ii) monitor both theevolution of the leakages and the effectiveness of subsequent remediation activities. These measurementscan also conveniently be used to detect diffuse leakages.

Caracterización de parámetros petrofísicos relacionados con la capacidad de almacenamiento de CO2 en el acuífero salino profundo de Hontomín (Burgos)

La conciencia de la crisis de la modernidad -que comienza ya a finales del siglo XIX- ha cobrado más experiencia debido al conocimiento de los límites del desarrollo económico, ya que como parecía razonable pensar, también los recursos naturales son finitos. En 1972, el Club de Roma analizó las distintas opciones disponibles para conseguir armonizar el desarrollo sostenible y las limitaciones medioambientales. Fue en 1987 cuando la Comisión Mundial para el Medio Ambiente y el Desarrollo de la ONU definía por primera vez el concepto de desarrollo sostenible. Definición que posteriormente fue incorporada en todos los programas de la ONU y sirvió de eje, por ejemplo, a la Cumbre de la Tierra celebrada en Río de Janeiro en 1992. Parece evidente que satisfacer la demanda energética, fundamentalmente desde la Revolución Industrial en el s XIX, trajo consigo un creciente uso de los combustibles fósiles, con la consiguiente emisión de los gases de efecto invernadero (GEI) y el aumento de la temperatura global media terrestre. Esta temperatura se incrementó en los últimos cien años en una media de 0.74ºC. La mayor parte del incremento observado desde la mitad del siglo XX en esta temperatura media se debe, con una probabilidad de al menos el 90%, al aumento observado en los GEI antropogénicos, siendo uno de ellos el CO2 que proviene de la transformación del carbono de los combustibles fósiles durante su combustión. Ante el creciente uso de los combustibles fósiles, los proyectos CAC, proyectos de captura, transporte y almacenamiento, se presentan como una contribución al desarrollo sostenible ya que se trata de una tecnología que permite mitigar el cambio climático. Para valorar si la tecnología CAC es sostenible, habrá que comprobar si existe o no capacidad para almacenar el CO2 en una cantidad mayor a la de producción y durante el tiempo necesario que impone la evolución de la concentración de CO2 en la atmósfera para mantenerla por debajo de las 450ppmv (concentración de CO2 que propone el Panel Intergubernamental para el Cambio Climático). El desarrollo de los proyectos CAC completos pasa por la necesaria selección de adecuados almacenes de CO2 que sean capaces de soportar los efectos de las presiones de inyección, así como asegurar la capacidad de dichos almacenes y la estanqueidad del CO2 en los mismos. La caracterización geológica de un acuífero susceptible de ser almacén de CO2 debe conducir a determinar las propiedades que dicho almacén posee para asegurar un volumen adecuado de almacenamiento, una inyectabilidad del CO2 en el mismo a un ritmo adecuado y la estanqueidad del CO2 en dicho acuífero a largo plazo. El presente trabajo pretende estudiar los parámetros que tienen influencia en el cálculo de la capacidad del almacén, para lo que en primer lugar se ha desarrollado la tecnología necesaria para llevar a cabo la investigación mediante ensayos de laboratorio. Así, se ha desarrollado una patente, "ATAP, equipo para ensayos petrofísicos (P201231913)", con la que se ha llevado a cabo la parte experimental de este trabajo para la caracterización de los parámetros que tienen influencia en el cálculo de la capacidad del almacén. Una vez desarrollada la tecnología, se aborda el estudio de los distintos parámetros que tienen influencia en la capacidad del almacén realizando ensayos con ATAP. Estos ensayos definen el volumen del almacenamiento, llegándose a la conclusión de que en la determinación de este volumen, juegan un papel importante el alcance de los mecanismos trampa, físicos o químicos, del CO2 en el almacén. Ensayos que definen la capacidad del almacén de "aceptar" o "rechazar" el CO2 inyectado, la inyectabilidad, y por último, ensayos encaminados a determinar posibles fugas que se pueden dar a través de los pozos de inyección, definidos estos como caminos preferenciales de fugas en un almacén subterráneo de CO2. Queda de este modo caracterizada la estanqueidad del CO2 en el acuífero a largo plazo y su influencia obvia en la determinación de la capacidad del almacén. Unido al propósito de la estimación de la capacidad del almacén, se encuentra el propósito de asegurar la estanqueidad de dichos almacenes en el tiempo, y adelantarse a la evolución de la pluma de CO2 en el interior de dichos almacenes. Para cumplir este propósito, se ha desarrollado un modelo dinámico a escala de laboratorio, mediante el programa ECLIPSE 300, con el fin de establecer una metodología para el cálculo de la capacidad estimada del almacén, así como el estudio de la evolución de la pluma de CO2 dentro del acuífero a lo largo del tiempo, partiendo de los resultados obtenidos en los ensayos realizados en ATAP y con la modelización de la probeta de roca almacén empleada en dichos ensayos. Presentamos por tanto un trabajo que establece las bases metodológicas para el estudio de la influencia de distintos parámetros petrofísicos en el cálculo de la capacidad del almacén unidos al desarrollo tecnológico de ATAP y su utilización para la determinación de dichos parámetros aplicables a cada acuífero concreto de estudio. ABSTRACT The crisis of modernity –which begins at the end of 19th Century- has been more important due to the knowledge of the limits of economic development, since it appeared to be thought reasonable, the natural resources are finite. In 1972, The Club of Rome analyzed the different options available in order to harmonize the sustainability and the environment development. It was in 1987 when The Global Commission on The Environment and the Development of UN, defined for the first time the concept of Sustainable Development. This definition that was fully incorporated in all the UN programs and it was useful as an axis, for example, in La Cumbre de la Tierra summit in Río de Janeiro in 1992. It seems obvious to satisfy energetic demand, basically after The Industrial Revolution in 19th Century, which represented an increasing use of fossil fuels, therefore greenhouse gases emission and the increasing of global average temperature. This temperature increased in the last 100 years up to 0.74ºC. The major part of the temperature increase is due to the increase observed in Greenhouse gases with human origin, at least with 90% of probability. The most important gas is the CO2 because of its quantity. In the face of the increasing use of fossil fuels, the CCS projects, Carbon Capture and Storage projects, appear as a contribution of sustainable development since it is a technology for avoiding the climate change. In order to evaluate if CCS technology is sustainable, it will be necessary to prove if the capacity for CO2 storage is available or not in a quantity greater than the production one and during the time necessary to keep the CO2 concentration in the atmosphere lower than 450ppmv (concentration imposed by IPCC). The development of full CCS projects goes through the selection of good CO2 storages that are able to support the effects of pressure injection, and assure the capacity of such storages and the watertightness of CO2. The geological characterization of the aquifer that could be potential CO2 storage should lead to determine the properties that such storage has in order to assure the adequate storage volume, the CO2 injectivity in a good rate, and the watertightness of the CO2 in the long term. The present work aims to study the parameters that have influence on the calculation of storage capacity, and for that purpose the appropriate technology has been developed for carrying out the research by mean of laboratory tests. Thus, a patent has been developed, "ATAP, equipo para ensayos petrofísicos (P201231913)", that has been used for developing the experimental part of this work. Once the technology has been developed, the study of different parameters, that have influence on the capacity of the storage, has been addressed developing different tests in ATAP. These tests define the storage volume which is related to the scope of different CO2 trap mechanisms, physical or chemical, in the storage. Tests that define the capacity of the storage to “accept” or “reject” the injected CO2, the injectivity, and tests led to determine possible leakages through injection wells. In this way we could talk about the watertightness in the aquifer in the long term and its influence on the storage capacity estimation. Together with the purpose of the storage capacity estimation, is the purpose of assuring the watertightness of such storages in the long term and anticipating the evolution of CO2 plume inside such aquifers. In order to fulfill this purpose, a dynamic model has been developed with ECLIPSE 300, for stablishing the methodology for the calculation of storage capacity estimation and the evolution of the CO2 plume, starting out with the tests carried out in ATAP. We present this work that establishes the methodology bases for the study of the influence of different petrophysics parameters in the calculation of the capacity of the storage together with the technological development of ATAP and its utilization for the determination of such parameters applicable to each aquifer.

Assessment of CO2 adsorption capacity on activated carbons by a combination of batch and dynamic tests

In this work, batch and dynamic adsorption tests are coupled for an accurate evaluation of CO2 adsorption performance for three different activated carbons obtained from olives stones by chemical activation followed by physical activation with CO2 at varying times, i.e. 20, 40 and 60 h. Kinetic and thermodynamic CO2 adsorption tests from simulated flue-gas at different temperature and CO2 pressure are carried out both in batch (a manometric equipment operating with pure CO2) and dynamic (a lab-scale fixed-bed column operating with CO2/N2 mixture) conditions. The textural characterization of the activated carbon samples shows a direct dependence of both micropore and ultramicropore volume on the activation time, hence AC60 has the higher contribution. The adsorption tests conducted at 273 and 293 K showed that, when CO2 pressure is lower than 0.3 bar, the lower the activation time the higher CO2 adsorption capacity and a ranking ωeq(AC20)>ωeq(AC40)>ωeq(AC60) can be exactly defined when T= 293 K. This result can be likely ascribed to a narrower pore size distribution of the AC20 sample, whose smaller pores are more effective for CO2 capture at higher temperature and lower CO2 pressure, the latter representing operating conditions of major interest for decarbonation of a flue-gas effluent. Moreover, the experimental results obtained from dynamic tests confirm the results derived from the batch tests in terms of CO2 adsorption capacity. It is important to highlight that the adsorption of N2 on the synthesized AC samples can be considered negligible. Finally, the importance of a proper analysis of characterization data and adsorption experimental results is highlighted for a correct assessment of CO2 removal performances of activated carbons at different CO2 pressure and operating temperature.

Seawater carbonate chemistry and reproduction of the two calanoid copepods Centropages typicus and Temora longicornis in a laboratory experiment

Some planktonic groups suffer negative effects from ocean acidification (OA), although copepods might be less sensitive. We investigated the effect of predicted CO2 levels (range 480-750 ppm), on egg production and hatching success of two copepod species, Centropages typicus and Temora longicornis. In these short-term incubations there was no significant effect of high CO2 on these parameters. Additionally a very high CO2 treatment, (CO2 = 9830 ppm), representative of carbon capture and storage scenarios, resulted in a reduction of egg production rate and hatching success of C. typicus, but not T. longicornis. In conclusion, reproduction of C. typicus was more sensitive to acute elevated seawater CO2 than that of T. longicornis, but neither species was affected by exposure to CO2 levels predicted for the year 2100. The duration and seasonal timing of exposures to high pCO2, however, might have a significant effect on the reproduction success of calanoid copepods.

Climate seasonality limits leaf carbon assimilation and wood productivity in tropical forests.

The seasonal climate drivers of the carbon cy- cle in tropical forests remain poorly known, although these forests account for more carbon assimilation and storage than any other terrestrial ecosystem. Based on a unique combina- tion of seasonal pan-tropical data sets from 89 experimental sites (68 include aboveground wood productivity measure- ments and 35 litter productivity measurements), their asso- ciated canopy photosynthetic capacity (enhanced vegetation index, EVI) and climate, we ask how carbon assimilation and aboveground allocation are related to climate seasonal- ity in tropical forests and how they interact in the seasonal carbon cycle. We found that canopy photosynthetic capacity seasonality responds positively to precipitation when rain- fall is < 2000 mm yr-1 (water-limited forests) and to radia- tion otherwise (light-limited forests). On the other hand, in- dependent of climate limitations, wood productivity and lit- terfall are driven by seasonal variation in precipitation and evapotranspiration, respectively. Consequently, light-limited forests present an asynchronism between canopy photosyn- thetic capacity and wood productivity. First-order control by precipitation likely indicates a decrease in tropical forest pro- ductivity in a drier climate in water-limited forest, and in cur- rent light-limited forest with future rainfall < 2000 mm yr-1.

Experimental and numerical characterization of flame instability in hydrogen-containing flames

In the framework of the energy transition, the acquisition of proper knowledge of fundamental aspects characterizing the use of alternative fuels is paramount as well as the development of optimized know-how and technologies. In this sense, the use of hydrogen has been indicated as a promising route for decarbonization at the end-users stage in the energy supply chain. However, the elevated reactivity and the low-density at atmospheric conditions of hydrogen pose new challenges. Among the others, the dilution of hydrogen with carbon dioxide from carbon capture and storage systems represents a possible route. However, the interactions between these species have been poorly studied so far. For these reasons, this thesis, in collaboration between the University of Bologna and Technische Universität Bergakademie of Freiberg in Saxony (Germany), investigates the laminar flame of hydrogen-based premixed gas with the dilution of carbon dioxide. An experimental system, called a heat flux burner, was adopted ad different operating conditions. The presence of the cellularity phenomenon, forming the so-called cellular flame, was observed and analysed. Theoretical and visual methods have allowed for the characterization of the investigated flames, opening new alternatives for sustainable energy production via hydrogen transformation.

Pore-scale modeling of two-phase flow instabilities in porous media

Les problèmes d'écoulements multiphasiques en média poreux sont d'un grand intérêt pour de nombreuses applications scientifiques et techniques ; comme la séquestration de C02, l'extraction de pétrole et la dépollution des aquifères. La complexité intrinsèque des systèmes multiphasiques et l'hétérogénéité des formations géologiques sur des échelles multiples représentent un challenge majeur pour comprendre et modéliser les déplacements immiscibles dans les milieux poreux. Les descriptions à l'échelle supérieure basées sur la généralisation de l'équation de Darcy sont largement utilisées, mais ces méthodes sont sujettes à limitations pour les écoulements présentant de l'hystérèse. Les avancées récentes en terme de performances computationnelles et le développement de méthodes précises pour caractériser l'espace interstitiel ainsi que la distribution des phases ont favorisé l'utilisation de modèles qui permettent une résolution fine à l'échelle du pore. Ces modèles offrent un aperçu des caractéristiques de l'écoulement qui ne peuvent pas être facilement observées en laboratoire et peuvent être utilisé pour expliquer la différence entre les processus physiques et les modèles à l'échelle macroscopique existants. L'objet premier de la thèse se porte sur la simulation numérique directe : les équations de Navier-Stokes sont résolues dans l'espace interstitiel et la méthode du volume de fluide (VOF) est employée pour suivre l'évolution de l'interface. Dans VOF, la distribution des phases est décrite par une fonction fluide pour l'ensemble du domaine et des conditions aux bords particulières permettent la prise en compte des propriétés de mouillage du milieu poreux. Dans la première partie de la thèse, nous simulons le drainage dans une cellule Hele-Shaw 2D avec des obstacles cylindriques. Nous montrons que l'approche proposée est applicable même pour des ratios de densité et de viscosité très importants et permet de modéliser la transition entre déplacement stable et digitation visqueuse. Nous intéressons ensuite à l'interprétation de la pression capillaire à l'échelle macroscopique. Nous montrons que les techniques basées sur la moyenne spatiale de la pression présentent plusieurs limitations et sont imprécises en présence d'effets visqueux et de piégeage. Au contraire, une définition basée sur l'énergie permet de séparer les contributions capillaires des effets visqueux. La seconde partie de la thèse est consacrée à l'investigation des effets d'inertie associés aux reconfigurations irréversibles du ménisque causé par l'interface des instabilités. Comme prototype pour ces phénomènes, nous étudions d'abord la dynamique d'un ménisque dans un pore angulaire. Nous montrons que, dans un réseau de pores cubiques, les sauts et reconfigurations sont si fréquents que les effets d'inertie mènent à différentes configurations des fluides. A cause de la non-linéarité du problème, la distribution des fluides influence le travail des forces de pression, qui, à son tour, provoque une chute de pression dans la loi de Darcy. Cela suggère que ces phénomènes devraient être pris en compte lorsque que l'on décrit l'écoulement multiphasique en média poreux à l'échelle macroscopique. La dernière partie de la thèse s'attache à démontrer la validité de notre approche par une comparaison avec des expériences en laboratoire : un drainage instable dans un milieu poreux quasi 2D (une cellule Hele-Shaw avec des obstacles cylindriques). Plusieurs simulations sont tournées sous différentes conditions aux bords et en utilisant différents modèles (modèle intégré 2D et modèle 3D) afin de comparer certaines quantités macroscopiques avec les observations au laboratoire correspondantes. Malgré le challenge de modéliser des déplacements instables, où, par définition, de petites perturbations peuvent grandir sans fin, notre approche numérique apporte de résultats satisfaisants pour tous les cas étudiés. - Problems involving multiphase flow in porous media are of great interest in many scientific and engineering applications including Carbon Capture and Storage, oil recovery and groundwater remediation. The intrinsic complexity of multiphase systems and the multi scale heterogeneity of geological formations represent the major challenges to understand and model immiscible displacement in porous media. Upscaled descriptions based on generalization of Darcy's law are widely used, but they are subject to several limitations for flow that exhibit hysteric and history- dependent behaviors. Recent advances in high performance computing and the development of accurate methods to characterize pore space and phase distribution have fostered the use of models that allow sub-pore resolution. These models provide an insight on flow characteristics that cannot be easily achieved by laboratory experiments and can be used to explain the gap between physical processes and existing macro-scale models. We focus on direct numerical simulations: we solve the Navier-Stokes equations for mass and momentum conservation in the pore space and employ the Volume Of Fluid (VOF) method to track the evolution of the interface. In the VOF the distribution of the phases is described by a fluid function (whole-domain formulation) and special boundary conditions account for the wetting properties of the porous medium. In the first part of this thesis we simulate drainage in a 2-D Hele-Shaw cell filled with cylindrical obstacles. We show that the proposed approach can handle very large density and viscosity ratios and it is able to model the transition from stable displacement to viscous fingering. We then focus on the interpretation of the macroscopic capillary pressure showing that pressure average techniques are subject to several limitations and they are not accurate in presence of viscous effects and trapping. On the contrary an energy-based definition allows separating viscous and capillary contributions. In the second part of the thesis we investigate inertia effects associated with abrupt and irreversible reconfigurations of the menisci caused by interface instabilities. As a prototype of these phenomena we first consider the dynamics of a meniscus in an angular pore. We show that in a network of cubic pores, jumps and reconfigurations are so frequent that inertia effects lead to different fluid configurations. Due to the non-linearity of the problem, the distribution of the fluids influences the work done by pressure forces, which is in turn related to the pressure drop in Darcy's law. This suggests that these phenomena should be taken into account when upscaling multiphase flow in porous media. The last part of the thesis is devoted to proving the accuracy of the numerical approach by validation with experiments of unstable primary drainage in a quasi-2D porous medium (i.e., Hele-Shaw cell filled with cylindrical obstacles). We perform simulations under different boundary conditions and using different models (2-D integrated and full 3-D) and we compare several macroscopic quantities with the corresponding experiment. Despite the intrinsic challenges of modeling unstable displacement, where by definition small perturbations can grow without bounds, the numerical method gives satisfactory results for all the cases studied.

Evaluation of the main energy scenarios for the global energy transition

Energy scenarios are used as a tool to examine credible future states and pathways. The one who constructs a scenario defines the framework in which the possible outcomes exist. The credibility of a scenario depends on its compatibility with real world experiences, and on how well the general information of the study, methodology, and originality and processing of data are disclosed. In the thesis, selected global energy scenarios’ transparency and desirability from the society’s point of view were evaluated based on literature derived criteria. The global energy transition consists of changes to social conventions and economic development in addition to technological development. Energy solutions are economic and ethical choices due to far-reaching impacts of energy decision-making. Currently the global energy system is mostly based on fossil fuels, which is unsustainable over the long-term due to various reasons: negative climate change impacts, negative health impacts, depletion of fossil fuel reserves, resource-use conflicts with water management and food supply, loss of biodiversity, challenge to preserve ecosystems and resources for future generations, and inability of fossil fuels to provide universal access to modern energy services. Nuclear power and carbon capture and storage cannot be regarded as sustainable energy solutions due to their inherent risks and required long-term storage. The energy transition is driven by a growing energy demand, decreasing costs of renewables, modularity and scalability of renewable technologies, macroeconomic benefits of using renewables, investors’ risk awareness, renewable energy related attractive business opportunities, almost even distribution of solar and wind resources on the planet, growing awareness of the planet’s environmental status, environmental movements and tougher environmental legislation. Many of the investigated scenarios identified solar and wind power as a backbone for future energy systems. The scenarios, in which the solar and wind potentials were deployed in largest scale, met best the set out sustainability criteria. In future research, energy scenarios’ transparency can be improved by better disclosure on who has ordered the study, clarifying the funding, clearly referencing to used sources and indicating processed data, and by exploring how variations in cost assumptions and deployment of technologies influence on the outcomes of the study.

Análise de ciclo avançado com seqüestro de carbono

The energy is considered one of the most important elements in the human´s life providing the survival as well as the well being. Nowadays, the technologies destined to generate power burn fossil fuels which pour gases (carbon dioxide among them) that contribute to the global warming phenomenon. Several research groups and universities have been studying different methods for generating power with low carbon dioxide emissions, including the possibility of burning zero-carbon fuels. In this text, it has been put attention to the Advanced Zero Emission Power Plants (AZEP) which separate the CO2 (from the gases involved in the power generation), compress it, dehydrate it and store it in appropriate reservoirs. The goal of this study was to find a possible solution to produce CO from CO2, activated by solar energy; the reaction between CO and steam generates a syngas comprised of H2 and CO2, which can be separated by chemical and/or physical processes. The text also contains a study concerning the compressed air energy storage power plant (CAES) and come up with its modification to C[CO2]ES. This power plant stores CO2 directing it to a reverse combustion process to produce CO which is headed to a syngas reactor to produce CO2 and H2. Hydrogen is separated and carried to the thermal cycle to generate power with low carbon emissions