Morphological and phytochemical characterization of Piper hispidinervum DC. and Piper aduncum L. populations in the state of Acre

Because of the increasing demand of the industry for the production of essential oils, studies highlight the genetic variability of Piper hispidinervum and P. aduncum species according to their patterns of spatial distribution, showing the Amazon region as the source of superior genetic material in the production of safrole and dillapiole. Thus, the objective this study was to characterize the morphology and the phytochemistry of Piper hispidinervum and P. aduncum populations in the Active Germplasm Bank of Embrapa Acre to generate subsidies for the genetic improvement of these species. The results showed that the average values for leaf width and length were 141.67 and 48.04 mm, and petioles length and diameter measurements were 2.83 and 1.78 mm for P. hispidinervum and 189.22; 67.74; 6.03 and 2.22 mm for P. aduncum respectively. The average height and canopy volume measurements were 2.39 m and 6.30 m3 and 2.70 m and 7.78 m3 respectively for each species. For P. hispidinervum, the population with higher performance indried yield and content of safrole was population 02, with 3.9%, and the population 04 showed 94.3% safrole content, both with genetic material from the region of Acrelândia and Plácido de Castro. To P. aduncum, the populations with better performance were 207, 208 and 209, forming a homogeneous group with dried yield average of 3.8% and dillapiol content of 84-85%. Such populations are indicated for selection in breeding program of these species due to better performance.

Yield of essential oil and safrole content based on fresh and dry biomass of long pepper in the Brazilian Amazon

Long pepper (Piper hispidinervum) is an Amazonian species of commercial interest due to the production of safrole. Drying long pepper biomass to extract safrole is a time consuming and costly process that can also result in the contamination of the material by microorganisms. The objective of this study was to analyze the yield of essential oil and safrole content of fresh and dried biomass of long pepper accessions maintained in the Active Germoplasm Bank of Embrapa Acre, in the state of Acre, Brazil, aiming at selecting genotypes with best performance on fresh biomass to recommend to the breeding program of the species. Yield of essential oil and safrole content were assessed in 15 long pepper accessions. The essential oil extraction was performed by hydrodistillation and analyzed by gas chromatography. A joint analysis of experiments was performed and the means of essential oil yield and safrole content for each biomass were compared by Student's t-test. There was variability in the essential oil yield and safrole content. There was no difference between the types of biomass for oil yield; however to the safrole content there was difference. Populations 9, 10, 12 and 15 had values of oil yield between 4.1 and 5.3%, and safrole content between 87.2 and 94.3%. The drying process does not interfere in oil productivity. These populations have potential for selection to the long pepper breeding program using oil extraction in the fresh biomass

Manipulating sex ratio to increase population growth: the example of the Lesser Kestrel

Small or decreasing populations call for emergency actions like, for example, captive breeding programs. Such programs aim at rapidly increasing population sizes in order to reduce the loss of genetic variability and to avoid possible Allee effects. The Lesser Kestrel Falco naumanni is one of the species that is currently supported in several captive breeding programs at various locations. Here, we model the demographic and genetic consequences of potential management strategies that are based on offspring sex ratio manipulation. Increased population growth could be achieved by manipulating female conditions and/or male attractiveness in the captive breeders and consequently shifting the offspring sex ratio towards more female offspring, which are then used for reintroduction. Fragmenting populations into wild-breeding and captive-breeding demes and manipulating population sex ratio both immediately increase the inbreeding coefficient in the next generation (i.e. decrease N-e) but may, in the long term, reduce the loss of genetic variability if population growth is restricted by the number of females. We use the Lesser Kestrel and the wealth of information that is available on this species to predict the long-term consequences of various kinds of sex-ratio manipulation. We find that, in our example and possibly in many other cases, a sex-ratio manipulation that seems realistic could have a beneficial effect on the captive breeding program. However, the possible long-term costs and benefits of such measures need to be carefully optimized.

Biometrical analysis and selection of tetraploid progenies of Panicum maximum using mixed model methods

The objectives of this work were to estimate the genetic and phenotypic parameters and to predict the genetic and genotypic values of the selection candidates obtained from intraspecific crosses in Panicum maximum as well as the performance of the hybrid progeny of the existing and projected crosses. Seventy-nine intraspecific hybrids obtained from artificial crosses among five apomictic and three sexual autotetraploid individuals were evaluated in a clonal test with two replications and ten plants per plot. Green matter yield, total and leaf dry matter yields and leaf percentage were evaluated in five cuts per year during three years. Genetic parameters were estimated and breeding and genotypic values were predicted using the restricted maximum likelihood/best linear unbiased prediction procedure (REML/BLUP). The dominant genetic variance was estimated by adjusting the effect of full-sib families. Low magnitude individual narrow sense heritabilities (0.02-0.05), individual broad sense heritabilities (0.14-0.20) and repeatability measured on an individual basis (0.15-0.21) were obtained. Dominance effects for all evaluated characteristics indicated that breeding strategies that explore heterosis must be adopted. Less than 5% increase in the parameter repeatability was obtained for a three-year evaluation period and may be the criterion to determine the maximum number of years of evaluation to be adopted, without compromising gain per cycle of selection. The identification of hybrid candidates for future cultivars and of those that can be incorporated into the breeding program was based on the genotypic and breeding values, respectively. The prediction of the performance of the hybrid progeny, based on the breeding values of the progenitors, permitted the identification of the best crosses and indicated the best parents to use in crosses.

Relationship between grain colour and preharvest sprouting-resistance in wheat

Since red alleles (R) of the genes that control grain colour are important for the improvement of preharvest sprouting resistance in wheat and there are three independently inherited loci, on chromosomes 3A, 3B and 3D of hexaploid wheat, it is possible to vary the dosage of dominant alleles in a breeding program. The objective of this work was to evaluate the dosage effect of R genes on preharvest sprouting, in a single seed descent population, named TRL, derived from the cross between Timgalen, white-grained wheat, and RL 4137, red-grained wheat. The study was carried out using sprouting data in ripe ears obtained under artificial conditions in a rainfall simulator over three years. According to the results there is a significant effect on preharvest sprouting provided by colour and a weaker effect of increasing R dosage. However, the significant residual genotypic variation between red lines and all lines (reds and whites) at 0.1% level showed that preharvest sprouting was also controlled by other genes. There are no significant correlations between sprouting and date of ripeness or between ripeness, R dosage and colour intensity.

Genotype and environment interaction on soybean yield in Mato Grosso State, Brazil

The objective of this work was to investigate the genotype-environment interaction in Mato Grosso State, MT. The relative importance of locations, years, sowing dates and cultivars and their interactions was analyzed from data collected in regional yield trials performed in a randomized complete block design with four replications, from 1994-1995 through 1999-2000, in nine locations and two sowing dates. Individual and pooled analyses of variance over years and locations were performed. Complementary analyses of variances partitioned MT State in two main and five smaller regions, respectively: North and South of Cuiabá; and MT-South-A (Pedra Preta area), MT-South-B (Rondonópolis and Itiquira), MT-East (Primavera do Leste and Campo Verde), MT-Central (Nova Mutum, Lucas do Rio Verde and Sorriso) and MT-Parecis (Campo Novo dos Parecis and Sapezal). Locations are relatively more important than years for yield testing soybeans in the MT State, therefore, investment should be made in increasing locations rather than years to improve experimental precision. Partitioning the MT State into regions has little impact on soybean yield testing results and, consequently, on the efficiency of the soybean breeding program in the State. Breeding genotypes with broad adaptation for the MT State is an efficient strategy for cultivar development.

Key locations for soybean genotype assessment in Central Brazil

The objective of this work was to identify key locations for the establishment of soybean (Glycine max) genetic breeding programs, in the Central Region of Brazil. Grain yield data of three maturity groups of soybean genotypes, from regional trials conducted over three years, at 18 locations in Brazilian Cerrado were used. A key location for the early phases of the breeding program was defined as the site that best classifies the winning genotypes in the region. Key locations for the final phases were defined as those sites that best represent each environmental stratum, in relation to the adaptability of the respective winning genotype. This adaptability was estimated by additive main effects and multiplicative interaction (AMMI) model analysis, using the distance between the score of each location in a stratum and the score of the winning genotype, which characterizes such stratum in an AMMI biplot. The locations that best classified the winning genotypes over space and time were Mineiros, Placas and Rio Verde. For the final phases of genotype selection, with data from the three maturity group, the recommended locations were: Buritis, Chapadão do Céu, Iraí, Pamplona, Placas, Planaltina, Rio Verde, Sacramento, Senador Canedo, Uberaba, and Uberlândia.

Selection strategies of segregant soybean populations for resistance to Asian rust

The objective of this work was to identify the best selection strategies for the more promising parental combinations to obtain lines with good resistance to soybean Asian rust (Phakopsora pachyrhizi). Two experiments were carried out in the field during the 2006/2007 and 2007/2008 growing seasons, to determine the percentage of infected leaf area of individual plants of five parents and their segregant F2 and F3 populations. The data obtained indicates that additive genetic variance predominates in the control of soybean resistance to Asian rust, and that the year and time of assessment do not significantly influence the estimates of the genetic parameters obtained. The narrow-sense heritability (h²r) ranged from 23.12 to 55.83%, and indicates the possibility of successful selection of resistant individuals in the early generations of the breeding program. All the procedures used to select the most promising populations to generate superior inbred lines for resistance to P. pachyrhizi presented similar results and identified the BR01-18437 x BRS 232 population as the best for inbred line selection.

Divergence and genetic variability among superior rubber tree genotypes

The objective of this work was to estimate the genetic variability and divergence among 22 superior rubber tree (Hevea sp.) genotypes of the IAC 400 series. Univariate and multivariate analyses were performed using eight quantitative traits (descriptors), including yield. In the univariate analyses, the estimated parameters were: genetic and environmental variances; genetic and environmental coefficients of variation; and the variation index. The Mahalanobis generalized distance, the Tocher agglomerative method and canonical variables were used for the multivariate analyses. In the univariate analyses, variability was verified among the genotypes for all the variables evaluated. The Tocher method grouped the genotypes into 11 clusters of dissimilarity. The first four canonical variables explained 87.93% of the cumulative variation. The highest genetic variability was found in rubber yield-related traits, which contributed the most to the genetic divergence. The most divergent pairs of genotypes are suggested for crossbreeding. The genotypes evaluated are suitable for breeding and may be used to continue the IAC rubber tree breeding program.

Genetic diversity in table grapes based on RAPD and microsatellite markers

The objective of this work was to analyze the genetic diversity of 47 table grape accessions, from the grapevine germplasm bank of Embrapa Semiárido, using 20 RAPD and seven microsatellite markers. Genetic distances between pairs of accessions were obtained based on Jaccard's similarity index for RAPD data and on the arithmetic complement of the weighted index for microsatellite data. The groups were formed according to the Tocher's cluster analysis and to the unweighted pair‑group method with arithmetic mean (UPGMA). The microsatellite markers were more efficient than the RAPD ones in the identification of genetic relationships. Information on the genetic distance, based on molecular characteristics and coupled with the cultivar agronomic performance, allowed for the recommendation of parents for crossings, in order to obtain superior hybrids in segregating populations for the table grape breeding program of Embrapa Semiárido.

Genetic parameters and estimated genetic gains in young rubber tree progenies

The objective of this work was to assess the genetic parameters and to estimate genetic gains in young rubber tree progenies. The experiments were carried out during three years, in a randomized block design, with six replicates and ten plants per plot, in three representative Hevea crop regions of the state of São Paulo, Brazil. Twenty-two progenies were evaluated, from three to five years old, for rubber yield and annual girth growth. Genetic gain was estimated with the multi-effect index (MEI). Selection by progenies means provided greater estimated genetic gain than selection based on individuals, since heritability values of progeny means were greater than the ones of individual heritability, for both evaluated variables, in all the assessment years. The selection of the three best progenies for rubber yield provided a selection gain of 1.28 g per plant. The genetic gains estimated with MEI using data from early assessments (from 3 to 5-year-old) were generally high for annual girth growth and rubber yield. The high genetic gains for annual girth growth in the first year of assessment indicate that progenies can be selected at the beginning of the breeding program. Population effective size was consistent with the three progenies selected, showing that they were not related and that the population genetic variability is ensured. Early selection with the genetic gains estimated by MEI can be made on rubber tree progenies.

Inheritance of late flowering in natural variants of soybean cultivars under short-day conditions

The objective of this work was to determine the inheritance of the long juvenile period trait in natural variants of the Doko, BR 9 (Savana), Davis, Embrapa 1 (IAS 5RC), and BR 16 soybean cultivars. Complete diallel crosses were made between the Doko and BR 16 cultivars and their variants. A 3:1 segregation ratio was observed in the F2 populations of the 'Doko' x Doko-18T, 'Doko' x Doko-Milionária, 'Davis' x São Carlos, and 'BR 9 (Savana)' x MABR92-836 (Savanão) crosses, indicating that the long juvenile period trait is controlled by a pair of recessive genes. The difference in late flowering between the Doko cultivar and both of its variants was caused by a recessive spontaneous mutation at the same genetic locus. However, the variants Doko-18T and Doko-Milionária are identical mutants that share a pair of genes that control the long juvenile period under short-day conditions. These mutants can be used in breeding programs to develop cultivars adapted to low-latitude tropical regions.

RAPD markers utilization and other parameters in the determination of mango hybrids genitors

Actually mango (Mangifera indica, L.) is considered one of the largest Brazilian fruitbusiness for the export market. Cultivar selection having high fruit quality is a fundamental step to obtain excellent results in this business. A mango breeding program based on intervarietal hybridization may produce new improved cultivars for mango growers. Mango hybrids have been obtained by controlled or open crosses. In the last one, it is important to identify the male parent because it is useful for the genetic cultivar history, thus it is important for planning further improvements. This work presents a parentage test using among others parameters RAPD (Random amplified Polymorphic DNA) markers to estimate the male parent of the selected hybrids in an open cross plot by using five mango cultivars densely planted in a latin square design.

Molecular characterization of papaya genotypes using AFLP markers

Due to the low genetic variability reported in the commercial plantations of papaya (Carica papaya L.), the objective of this study was analyze the genetic diversity of 32 genotypes including cultivars, landraces, inbred lines, and improved germplasm using the AFLP technique (Amplified Fragment Length Polymorphism). The genetic distance matrix was obtained using the Nei and Li genetic distance and clustering was performed using the unweighted pair-method with arithmetic mean (UPGMA). Using 11 combinations of EcoRI/MseI primers, 383 polymorphic bands were obtained. On average, 34.8 polymorphic bands were obtained per primer combination. Five clusters were formed. The traditional cultivar 'Sunrise' and the inbred line CMF-L30-08 were the closest genotypes, and the improved germplasm (CMF041) and landrace (CMF233) the most distant. The main papaya cultivars commercially grown in Brazil, as well as four inbred lines and three improved germplasm, were clustered together, however, were not grouped in the same branch. The genetic distance between the Sunrise and Golden cultivars was 0.329, and even arising from mutation and selection within the Sunrise variety, the Golden stores considerable genetic variability. Additional variability was observed in the inbred lines derived from papaya breeding program at Embrapa Cassava and Fruits.

Biotechnology applied to Annona species: a review

Annonaceae is an ancient family of plants including approximately 50 genera growing worldwide in a quite restricted area with specific agroclimatic requirements. Only few species of this family has been cultivated and exploited commercially and most of them belonging to the genus Annona such as A. muricata, A. squamosa, the hybrid A. cherimola x A. squamosa and specially Annona cherimola: the cherimoya, commercially cultivated in Spain, Chile, California, Florida, México, Australia, Ecuador, Peru, Brazil, New Zealand and several countries in South and Central America. The cherimoya shows a high degree of heterozygosis, and to obtain homogeneous and productive orchards it is necessary to avoid the propagation by seeds of this species. Additionally, the traditional methods of vegetative propagation were inefficient and inadequate, due to the low morphogenetic potential of this species, and the low rooting rate. The in vitro tissue culture methods of micropropagation can be applied successfully to cherimoya and other Annona sp to overcome these problems. Most of the protocols of micropropagation and regeneration were developed using the cultivar Fino de Jete, which is the major cultivar in Spain. First it is developed the method to micropropagate the juvenile material of cherimoya (ENCINA et al., 1994), and later it was optimized a protocol to micropropagate adult cherimoya genotypes selected by outstanding agronomical traits (PADILLA and ENCINA, 2004) and further it was improved the process through micrografting (PADILLA and ENCINA, 2011).At the present time we are involved in inducing and obtaining new elite genotypes, as part of a breeding program for the cherimoya and other Annonas, using and optimizing different methodologies in vitro: a) Adventitious organogenesis and regeneration from cellular cultures (ENCINA, 2004), b) Ploidy manipulation of the cherimoya, to obtain haploid, tetraploid and triploid plants (seedless), c) Genetic transformation, for the genes introduction to control the postharvest processes and the genes introduction to provide resistance to pathogen and insects and d) Micropropagation and regeneration of other wild Annona or related Annonaceae species such as: Annona senegalensis, A. scleroderma, A. montana, A. reticulata, A. glabra, A. diversifolia and Rollinia sp.