Täyteainepitoisuuden ja retentioainesysteemin optimointi

Työssä tutkittiin tarrapaperikoneen pohjapaperin täyteainepitoisuuden nostamisen vaikutusta koneen ajettavuuteen ja paperin ominaisuuksiin. Työn tavoitteena oli löytää ne prosessitekniset keinot, joilla voitaisiin saavuttaa raskaiden pintapapereiden tavoitetuhkatasot. Lisäksi pyrittiin optimoimaan retentioaineiden annokset ja ajotavat korkeilla tuhkatasoilla. Kirjallisuusosassa tarkasteltiin pinta- ja kolloidikemian perusteita sekä täyteainepitoisuuden vaikutusta paperin ominaisuuksiin ja prosessoitavuuteen. Lisäk-si syvennyttiin märänpään kemiaan selvittämällä mm. kalsiumkarbonaatin vesiliuoskemiaa ja erilaisten retentioaineiden ominaisuuksia ja niiden reaktiomekanismeja. Työn kokeellinen osa koostui kahdesta koeajosta. Ensimmäisessä koeajossa selvitettiin täyteainesaostumien muodostumismekanismeja ja paperikoneen ajettavuutta täyteainepitoisuutta nostettaessa yli raskaiden pintapapereiden tavoitetasojen. Saadut tulokset osoittivat, että märänpään kemiantila pysyi koeajon aikana muuttumattomana eikä mitään saostumien muodostumista havaittu. Täyteainepitoisuudessa päästiin 3 % yli lajikohtaisen tuhkatavoitteen ilman ajettavuusongelmia. Toisessa koeajossa keskityttiin erityisesti märänpään retentioaineiden määrien optimointiin ja paperin laatuominaisuuksiin. Koeajossa täyteainepitoisuutta nostettiin yli tavoitetasojen. Saadut tulokset osoittivat, että täyteainepitoisuuden nostolla ei ollut vaikutusta paperin laatuun tai paperikoneen ajettavuuteen. Massatärkkelyksen avulla pystyttiin korvaamaan kationisen polymeerin retentiovaste ja kompensoimaan täyteainepitoisuuden noston myötä tullut paperin lujuuksien lasku. Koeajoissa ja prosessin seurannassa tuli ilmi myös useita eri tekijöitä, joilla oli vaikutusta retentioon, retentioaineiden tehoon ja prosessin stabiilisuuteen. Tehdyistä yksittäisistä havainnoista on hyötyä pyrittäessä ymmärtämään märänpään prosessin tilaa ja sen vaikutusta paperikoneen ajettavuuteen. Työ saavutti sille asetetut tavoitteet ja sen ansiosta paperikoneen märänpään raaka-aineiden ja kemikaalien syöttösuhteita pystyttiin muuttamaan tavalla, joka vähensi paperinvalmistuksen kustannuksia ilman että paperin laatuominaisuudet huononivat.

Biolietteen kuiva-ainepitoisuuden parantaminen elektro-kuivauksen avulla

Tässä työssä tutkittiin sähkön käyttömahdollisuuksia metsäteollisuuden jäteveden-puhdistamolla syntyvän biolietteen kuivauksessa. Lisäksi selvityksen kohteena olivat lietteen sähkökuivaukseen vaikuttavat tekijät. Työn kirjallisessa osassa perehdyttiin lietteiden syntyyn jätevedenpuhdistamolla sekä lietteiden ominaisuuksiin. Työssä tutustuttiin myös lietteiden käsittelyyn ja siinä käytettäviin tekniikoihin. Ennen työn kokeellista osaa esiteltiin sähkökuivauksen periaate sekä sähkökuivaukselle aiemmin tehtyjä tutkimuksia ja niistä saatuja kokemuksia. Myös tuotteistetut elektrokuivauksen sovellukset olivat osa työtä. Kokeellisessa osassa keskityttiin varsinaisiin sähkökuivauskokeisiin. Tutkimukset suoritettiin suodatuskokein, jotka toteutettiin imuun perustuvalla Büchner-suodattimella sekä painesuodattimella. Kokeissa tutkittiin tasavirran, virran pulssituksen ja vaihtovirran vaikutusta metsäteollisuuden primääri- ja biolietteeseen. Tasavirtatutkimuksissa sähkövirtaa johdettiin lietteeseen suodatuksen aikana, kun taas vaihtovirtaa testattaessa liete käsiteltiin ensin sähköllä ja suodatettiin erikseen. Suodatuskokeiden lisäksi tutkimuksissa tarkkailtiin lietteiden kuiva-ainepitoisuuksia, redox-potentiaalia, lämpötilaa, pH:ta ja sähkönjohtokykyä. Lietteitä tutkittiin myös tuhkapitoisuuden suhteen sekä suoritettiin solututkimuksia fluoresenssilukijan avulla. Työn laboratoriotutkimukset osoittivat sähkön vaikuttavan selkeästi biolietteen ve-denerotuskykyyn: sähkö nopeutti lietteen suodatusta parhaimmillaan yli 70 %. Säh-kökuivauksella lietteen kuiva-ainepitoisuudet pysyivät samoina, mutta suodatus nopeutui ja suodatusajat jopa puolittuivat. Myös lietteen sähkönjohtokyky kasvoi sähkökäsittelyn aikana, mikä viittasi veden vapautumiseen solujen sisältä. Lietteen kunto ja ominaisuudet, polymeeri, sekoitus sekä sähkökäsittelyn parametrit olivat tärkeässä asemassa sähkökuivauksen onnistumisen kannalta.

Characterisation of waste for combustion : with special reference to the role of zinc

Waste combustion has gone from being a volume reducing discarding-method to an energy recovery process for unwanted material that cannot be reused or recycled. Different fractions of waste are used as fuel today, such as; municipal solid waste, refuse derived fuel, and solid recovered fuel. Furthermore, industrial waste, normally a mixture between commercial waste and building and demolition waste, is common, either as separate fuels or mixed with, for example, municipal solid waste. Compared to fossil or biomass fuels, waste mixtures are extremely heterogeneous, making it a complicated fuel. Differences in calorific values, ash content, moisture content, and changing levels of elements, such as Cl and alkali metals, are common in waste fuel. Moreover, waste contains much higher levels of troublesome trace elements, such as Zn, which is thought to accelerate a corrosion process. Varying fuel quality can be strenuous on the boiler system and may cause fouling and corrosion of heat exchanger surfaces. This thesis examines waste fuels and waste combustion from different angles, with the objective of giving a better understanding of waste as an important fuel in today’s fuel economy. Several chemical characterisation campaigns of waste fuels over longer time periods (10-12 months) was used to determine the fossil content of Swedish waste fuels, to investigate possible seasonal variations, and to study the presence of Zn in waste. Data from the characterisation campaigns were used for thermodynamic equilibrium calculations to follow trends and determine the effect of changing concentrations of various elements. The thesis also includes a study of the thermal behaviour of Zn and a full—scale study of how the bed temperature affects the volatilisation of alkali metals and Zn from the fuel. As mixed waste fuel contains considerable amounts of fresh biomass, such as wood, food waste, paper etc. it would be wrong to classify it as a fossil fuel. When Sweden introduced waste combustion as a part of the European Union emission trading system in the beginning of 2013 there was a need for combustion plants to find a usable and reliable method to determine the fossil content. Four different methods were studied in full-scale of seven combustion plants; 14Canalysis of solid waste, 14C-analysis of flue gas, sorting analysis followed by calculations, and a patented balance method that is using a software program to calculate the fossil content based on parameters from the plant. The study showed that approximately one third of the coal in Swedish waste mixtures has fossil origins and presented the plants with information about the four different methods and their advantages and disadvantages. Characterisation campaigns also showed that industrial waste contain higher levels of trace elements, such as Zn. The content of Zn in Swedish waste fuels was determined to be approximately 800 mg kg-1 on average, based on 42 samples of solid waste from seven different plants with varying mixtures between municipal solid waste and industrial waste. A review study of the occurrence of Zn in fuels confirmed that the highest amounts of Zn are present in waste fuels rather than in fossil or biomass fuels. In tires, Zn is used as a vulcanizing agent and can reach concentration values of 9600-16800 mg kg-1. Waste Electrical and Electronic Equipment is the second Zn-richest fuel and even though on average Zn content is around 4000 mg kg-1, the values of over 19000 mg kg-1 were also reported. The increased amounts of Zn, 3000-4000 mg kg-1, are also found in municipal solid waste, sludge with over 2000 mg kg-1 on average (some exceptions up to 49000 mg kg-1), and other waste derived fuels (over 1000 mg kg-1). Zn is also found in fossil fuels. In coal, the average level of Zn is 100 mg kg-1, the higher amount of Zn was only reported for oil shale with values between 20-2680 mg kg-1. The content of Zn in biomass is basically determined by its natural occurrence and it is typically 10-100 mg kg-1. The thermal behaviour of Zn is of importance to understand the possible reactions taking place in the boiler. By using thermal analysis three common Zn-compounds were studied (ZnCl2, ZnSO4, and ZnO) and compared to phase diagrams produced with thermodynamic equilibrium calculations. The results of the study suggest that ZnCl2(s/l) cannot exist readily in the boiler due to its volatility at high temperatures and its conversion to ZnO in oxidising conditions. Also, ZnSO4 decomposes around 680°C, while ZnO is relatively stable in the temperature range prevailing in the boiler. Furthermore, by exposing ZnO to HCl in a hot environment (240-330°C) it was shown that chlorination of ZnO with HCl gas is possible. Waste fuel containing high levels of elements known to be corrosive, for example, Na and K in combination with Cl, and also significant amounts of trace elements, such as Zn, are demanding on the whole boiler system. A full-scale study of how the volatilisation of Na, K, and Zn is affected by the bed temperature in a fluidised bed boiler was performed parallel with a lab-scale study with the same conditions. The study showed that the fouling rate on deposit probes were decreased by 20 % when the bed temperature was decreased from 870°C to below 720°C. In addition, the lab-scale experiments clearly indicated that the amount of alkali metals and Zn volatilised depends on the reactor temperature.

Synthesis and Characterization of Cellulose fiber-silica nanocomposites

Cellulose fiber-silica nanocomposites with novel mechanical, chemical and thermal properties have potential to be widely applied in different area. Monodispered silica nanoparticles play an important role in enhancing hybrids properties of hardness, strength, thermal stability etc. On the other hand, cellulose is one of the world’s most abundant and renewable polymers and possesses several unique properties required in many areas and biomedicine. The aim of this master thesis is to study if silica particles from reaction of sodium silicate and sulphuric acid can be adsorbed onto cellulose fiber surfaces via in situ growth. First, nanosilica particles were synthesized. Effect of pH and silica contents were tested. In theoretical part, introduction of silica, methods of preparation of nanosilica from sodium silicate, effect factors and additives were discussed. Then, cellulose fiber-silica nanocomposites were synthesis via route from sodium silicate and route silicic acid. In the experiment of route from sodium silicate, the effects of types of sodium silicate, pH and target ratio of silica to fiber were investigated. From another aspect, the effects of types of sodium silicate, fiber concentration in mixture solution and target ratio of silica to fiber were tested in the experiment of route from silicic acid. Samples were investigated via zeta potential measurement, particle size distribution, ash content measurement and Scanning Electron Microscopy (SEM). The Results of the experiment of preparing silica sol were that the particle size of silica sol was smaller prepared in pH 11.7 than that prepared in pH 9.3. Then in the experiment of synthesis of cellulose fiber-silica nanocomposites, it was concluded that the zeta potential of all the samples were around -16 mV and the highest ash content of all the samples was only 1.4%. The results of SEM images showed only a few of silica particles could be observed on the fiber surface, which corresponded to the value of ash content measurement.

Functional properties and proximate composition of cactus pear cladodes flours

The objective of this research was to study the functional properties and proximate composition of three different flours prepared from cactus pear cladodes. Immature cactus pear cladodes were dried at 60 °C, 70 °C and 80 °C. The flours were analyzed for chemical composition, amino acid profile, fatty acid composition, functional properties and color. The analyses showed no significant differences in crude protein, total lipid, crude fiber and total ash content in the flours, possibly due to the drying temperature effect. Nevertheless, during the drying at 80 °C, a reduction of the water holding capacity (55%) was observed, along with a reduction of the green color intensity (34%) - characteristic of cactus pear. The heating produced larger concentrations of tyrosine, proline, aspartic acid, and glutamic acid. In the lipids of the flours, the most abundant fatty acids were palmitic acid (C16:0), linoleic acid (C18:2n6), linolenic acid (C18:3n3), and oleic acid (C18:1n9). The cladodes flours prepared at 60 °C presented a higher quality regarding their nutritional and functional properties.

Effect of soaking on the nutritional quality of pequi (Caryocar brasiliense Camb.) peel flour

Pequi peel comprises 76% of the whole fruit and it is discarded during consumption. Thus, pequi peel has been considered a solid residue, although it has potential for use in various applications. Limitations in the use of this material are mainly due to the lack of information of its nutritional composition, especially about the toxic or antinutritional factors. Soaking is often used to prepare complementary foods and has been reported to be beneficial for enhancing nutritive value. The effect of soaking on the nutritional quality of pequi peel flour was determined by measuring changes in chemical composition, antinutritional factors, total phenols and in vitro protein and starch digestibility. The results showed that 24 h of maceration increases the content of lipids (200%), protein (28.3%) and dietary fibber (31%), while carbohydrate and ash content decreases. There were no haemagglutination activity or α-amylase inhibitors, but it was detected the presence of phytic acid (0.4 g 100 g-1). The soaking reduced 8.5% phenols and 19.0% tannins, 6.2% protein digestibility, and was also effective to eliminate trypsin inhibitors, and increase starch digestibility (24.2%). Soaking was efficient to improve nutritional characteristics of the pequi peel flour, opening up possibilities for its use in food formulations.

Effect of Amaranth addition on the nutritional composition and consumer acceptability of extruded provitamin A-biofortified maize snacks

The objective of this study was to determine the effect of adding Amaranth leaf powder on the nutrient content and consumer acceptability of extruded provitamin A-biofortified (PVA) maize snacks. Flours of four varieties of PVA maize were composited with Amaranth leaf powder at 0, 1 and 3% (w/w) substitution of, respectively, and extruded into snacks. The ash content of the snacks increased from 0.53 g/100 g-0.58 g/100 g to 0.650 g/100g-89 g/100 g and protein content increased from 9.12 g/100 g-10.94 g/100 g when Amaranth was increased from 0% to 3%. Similarly, lysine content increased from 0.10 g/100 g to 0.17 g/100 g, whilst methionine increased from 0.14 g/100 g to 0.19 g/100 g. The provitamin A content of the snacks ranged from 1.29 µg/g to 1.40 µg/g at 0% Amaranth and 1.54 µg/g to 1.78 µg/g at 3% Amaranth. The acceptability of the snacks decreased with increasing Amaranth concentration, only a very small proportion (2-8%) of the panel liked the snacks extremely. PVA maize with added Amaranth leaf powder has a potential for use in nutritious and healthy extruded snacks, but the consumer acceptability of the snacks should be improved.

Application of Fermentation Techniques in the Utilization of Prawn Shell Waste

The present study aimed at the utlisation of microbial organisms for the production of good quality chitin and chitosan. The three strains used for the study were Lactobacillus plantarum, Lactobacililus brevis and Bacillus subtilis. These strains were selected on the basis of their acid producing ability to reduce the pH of the fermenting substrates to prevent spoilage and thus caused demineralisation of the shell. Besides, the proteolytic enzymes in these strains acted on proteinaceous covering of shrimp and thus caused deprotenisation of shrimp shell waste. Thus the two processes involved in chitin production can be affected to certain extent using bacterial fermentation of shrimp shell.Optimization parameters like fermentation period, quantity of inoculum, type of sugar, concentration of sugar etc. for fermentation with three different strains were studied. For these, parameters like pH, Total titrable acidity (TTA), changes in sugar concentration, changes in microbial count, sensory changes etc. were studied.Fermentation study with Lactobacillus plantarum was continued with 20% w/v jaggery broth for 15 days. The inoculum prepared yislded a cell concentration of approximately 108 CFU/ml. In the present study, lactic acid and dilute hydrochloric acid were used for initial pH adjustment because; without adjusting the initial pH, it took more than 5 hours for the lactic acid bacteria to convert glucose to lactic acid and during this delay spoilage occurred due to putrefying enzymes active at neutral or higher pH. During the fermentation study, pH first decreased in correspondence with increase in TTA values. This showed a clear indication of acid production by the strain. This trend continued till their proteolytic activity showed an increasing trend. When the available sugar source started depleting, proteolytic activity also decreased and pH increased. This was clearly reflected in the sensory evaluation results. Lactic acid treated samples showed greater extent of demineralization and deprotenisation at the end of fermentation study than hydrochloric acid treated samples. It can be due to the effect of strong hydrochloric acid on the initial microbial count, which directly affects the fermentation process. At the end of fermentation, about 76.5% of ash was removed in lactic acid treated samples and 71.8% in hydrochloric acid treated samples; 72.8% of proteins in lactic acid treated samples and 70.6% in hydrochloric acid treated samples.The residual protein and ash in the fermented residue were reduced to permissible limit by treatment with 0.8N HCI and 1M NaOH. Characteristics of chitin like chitin content, ash content, protein content, % of N- acetylation etc. were studied. Quality characteristics like viscosity, degree of deacetylation and molecular weight of chitosan prepared were also compared. The chitosan samples prepared from lactic acid treated showed high viscosity than HCI treated samples. But degree of deacetylation is more in HCI treated samples than lactic acid treated ones. Characteristics of protein liquor obtained like its biogenic composition, amino acid composition, total volatile base nitrogen, alpha amino nitrogen etc. also were studied to find out its suitability as animal feed supplement.Optimization of fermentation parameters for Lactobacillus brevis fermentation study was also conducted and parameters were standardized. Then detailed fermentation study was done in 20%wlv jaggery broth for 17 days. Also the effect of two different acid treatments (mild HCI and lactic acid) used for initial pH adjustment on chitin production were also studied. In this study also trend of changes in pH. changes in sugar concentration ,microbial count changes were similar to Lactobacillus plantarum studies. At the end of fermentation, residual protein in the samples were only 32.48% in HCI treated samples and 31.85% in lactic acid treated samples. The residual ash content was about 33.68% in HCI treated ones and 32.52% in lactic acid treated ones. The fermented residue was converted to chitin with good characteristics by treatment with 1.2MNaOH and 1NHCI.Characteristics of chitin samples prepared were studied and extent of Nacetylation was about 84% in HCI treated chitin and 85%in lactic acid treated ones assessed from FTIR spectrum. Chitosan was prepared from these samples by usual chemical method and its extent of solubility, degree of deacetylation, viscosity and molecular weight etc were studied. The values of viscosity and molecular weight of the samples prepared were comparatively less than the chitosan prepared by Lactobacillus plantarum fermentation. Characteristics of protein liquor obtained were analyzed to determine its quality and is suitability as animal feed supplement.Another strain used for the study was Bacillus subtilis and fermentation was carried out in 20%w/v jaggery broth for 15 days. It was found that Bacillus subtilis was more efficient than other Lactobacillus species for deprotenisation and demineralization. This was mainly due to the difference in the proteolytic nature of the strains. About 84% of protein and 72% of ash were removed at the end of fermentation. Considering the statistical significance (P

Zur Reaktionskinetik der Oxidation von Kohlenstoffmaterialien aus Biomasse

Zur Modellierung von Vergasungs- und Verbrennungsprozessen zur energetischen Nutzung von Biomasse ist die Kenntnis von reaktionskinetischen Daten für die Sauerstoff-Oxidation von Biomassepyrolysaten erforderlich. Eine ausführliche Literaturübersicht zeigt den Stand der Forschung bezüglich der experimentellen Ermittlung von reaktionskinetischen Parametern für die Oxidation von Pyrolysaten aus Lignin, Cellulose und pflanzlicher Biomasse sowie der Suche nach einem plausiblen Reaktionsmechanismus für die Reaktion von Sauerstoff mit festen Kohlenstoffmaterialien. Es wird eine Versuchsanlage mit einem quasistationär betriebenen Differentialreaktor konstruiert, die eine Messung der Reaktionskinetik und der reaktiven inneren Oberfläche (RSA) für die Reaktion eines Pyrolysats aus Maispflanzen mit Sauerstoff ermöglicht. Die getrockneten und zerkleinerten Maispflanzen werden 7 Minuten lang bei 1073 K in einem Drehrohrofen pyrolysiert. Das Pyrolysat zeichnet sich vor allem durch seine hohe Porosität von über 0,9 und seinen hohen Aschegehalt von 0,24 aus. Die RSA wird nach der Methode der Messung von Übergangskinetiken (TK) bestimmt. Die Bestimmung der RSA erfolgt für die Reaktionsprodukte CO und CO2 getrennt, für die entsprechend ermittelten Werte werden die Bezeichnungen CO-RSA und CO2-RSA eingeführt. Die Abhängigkeit dieser Größen von der Sauerstoffkonzentration läßt sich durch eine Langmuir-Isotherme beschreiben, ebenso das leichte Absinken der CO-RSA mit der Kohlendioxidkonzentration. Über dem Abbrand zeigen sich unterschiedliche Verläufe für die CO-RSA, CO2-RSA und die innere Oberfläche nach der BET-Methode. Zur Charakterisierung der Oberflächenzwischenprodukte werden temperaturprogrammierte Desorptionsversuche (TPD) durchgeführt. Die Ergebnisse zeigen, daß eine Unterscheidung in zwei Kohlenstoff-Sauerstoff-Oberflächenkomplexe ausreichend ist. Die experimentellen Untersuchungen zum Oxidationsverlauf werden im kinetisch bestimmten Bereich durchgeführt. Dabei werden die Parameter Temperatur, Sauerstoff-, CO- und CO2-Konzentration variiert. Anhand der Ergebnisse der reaktionskinetischen Untersuchungen wird ein Reaktionsmechanismus für die Kohlenstoff-Sauerstoff-Reaktion entwickelt. Dieser Reaktionsmechanismus umfaßt 7 Elementarreaktionen, für welche die reaktionskinetischen Parameter numerisch ermittelt werden. Darüber hinaus werden reaktionskinetische Parameter für einfachere massenbezogene Reaktionsgeschwindigkeitsansätze berechnet und summarische Reaktionsgeschwindigkeitsansätze für die Bildung von CO und CO2 aus dem Reaktionsmechanismus hergeleitet.

Hyperspectral field measurements to determine dry matter yield and nutritive value of legume-grass swards

Summary: Productivity, botanical composition and forage quality of legume-grass swards are important factors for successful arable farming in both organic and conventional farming systems. As these attributes can vary considerably within a field, a non-destructive method of detection while doing other tasks would facilitate a more targeted management of crops, forage and nutrients in the soil-plant-animal system. This study was undertaken to explore the potential of field spectral measurements for a non destructive prediction of dry matter (DM) yield, legume proportion in the sward, metabolizable energy (ME), ash content, crude protein (CP) and acid detergent fiber (ADF) of legume-grass mixtures. Two experiments were conducted in a greenhouse under controlled conditions which allowed collecting spectral measurements which were free from interferences such as wind, passing clouds and changing angles of solar irradiation. In a second step this initial investigation was evaluated in the field by a two year experiment with the same legume-grass swards. Several techniques for analysis of the hyperspectral data set were examined in this study: four vegetation indices (VIs): simple ratio (SR), normalized difference vegetation index (NDVI), enhanced vegetation index (EVI) and red edge position (REP), two-waveband reflectance ratios, modified partial least squares (MPLS) regression and stepwise multiple linear regression (SMLR). The results showed the potential of field spectroscopy and proved its usefulness for the prediction of DM yield, ash content and CP across a wide range of legume proportion and growth stage. In all investigations prediction accuracy of DM yield, ash content and CP could be improved by legume-specific calibrations which included mixtures and pure swards of perennial ryegrass and of the respective legume species. The comparison between the greenhouse and the field experiments showed that the interaction between spectral reflectance and weather conditions as well as incidence angle of light interfered with an accurate determination of DM yield. Further research is hence needed to improve the validity of spectral measurements in the field. Furthermore, the developed models should be tested on varying sites and vegetation periods to enhance the robustness and portability of the models to other environmental conditions.

Effects of plant diversity on bioenergy parameters in grassland biomass

Extensive grassland biomass for bioenergy production has long been subject of scientific research. The possibility of combining nature conservation goals with a profitable management while reducing competition with food production has created a strong interest in this topic. However, the botanical composition will play a key role for solid fuel quality of grassland biomass and will have effects on the combustion process by potentially causing corrosion, emission and slagging. On the other hand, botanical composition will affect anaerobic digestibility and thereby the biogas potential. In this thesis aboveground biomass from the Jena-Experiment plots was harvested in 2008 and 2009 and analysed for the most relevant chemical constituents effecting fuel quality and anaerobic digestibility. Regarding combustion, the following parameters were of main focus: higher heating value (HHV), gross energy yield (GE), ash content, ash softening temperature (AST), K, Ca, Mg, N, Cl and S content. For biogas production the following parameters were investigated: substrate specific methane yield (CH4 sub), area specific methane yield (CH4 area), crude fibre (CF), crude protein (CP), crude lipid (CL) and nitrogen-free extract (NfE). Furthermore, an improvement of the fuel quality was investigated through applying the Integrated generation of solid Fuel and Biogas from Biomass (IFBB) procedure. Through the specific setup of the Jena-Experiment it was possible to outline the changes of these parameters along two diversity gradients: (i) species richness (SR; 1 to 60 species) and (ii) functional group (grasses, legumes, small herbs and tall herbs) presence. This was a novel approach on investigating the bioenergy characteristic of extensive grassland biomass and gave detailed insight in the sward-composition¬ - bioenergy relations such as: (i) the most relevant SR effect was the increase of energy yield for both combustion (annual GE increased by 26% from SR8→16 and by 65% from SR8→60) and anaerobic digestion (annual CH4 area increased by 22% from SR8→16 and by 49% from SR8→60) through a strong interaction of SR with biomass yield; (ii) legumes play a key role for the utilization of grassland biomass for energy production as they increase the energy content of the substrate (HHV and CH4 sub) and the energy yield (GE and CH4 area); (iii) combustion is the conversion technique that will yield the highest energy output but requires an improvement of the solid fuel quality in order to reduce the risk of corrosion, emission and slagging related problems. This was achieved through applying the IFBB-procedure, with reductions in ash (by 23%), N (28%), K (85%), Cl (56%) and S (59%) and equal levels of concentrations along the SR gradient.

Eliminación de compuestos causantes de olores mediante adsorbentes/catalizadores obtenidos a partir de lodos de depuradora

El aumento de la cantidad de lodos y las dificultades inherentes a su aplicación agrícola y/o disposición en vertederos, hace necesario encontrar nuevas alternativas para su gestión. A nivel europeo, hoy en día se tiende hacia la aplicación de tratamientos térmicos (incineración, pirólisis y gasificación) que permiten una valoración energética de los lodos, si bien generan un residuo sólido que sigue siendo necesario gestionar. El problema medioambiental provocado por (malos) olores resulta difícil de abordar de una manera genérica, teniendo en consideración la propia naturaleza del olor y sus posibles causas. Los olores en las EDARs son provocados básicamente por la degradación de la materia orgánica en condiciones anaeróbicas y se detectan en todas las operaciones unitarias en diferentes niveles de concentración. Esta tesis incidiendo en ambos aspectos, tiene por objeto investigar la valorización de lodos como materiales precursores de adsorbentes/ catalizadores para la eliminación de olores en el entorno de las EDARs, maximizando la reutilización de los lodos. Para la realización de los experimentos se han seleccionado lodos procedentes de tres EDARs situadas en la región de Girona (SC, SB, SL) que difieren en cuanto al tratamiento de los lodos. Ambas muestras han sido caracterizadas con el fin de determinar las diferencias más importantes en los lodos de partida. Los parámetros de caracterización incluyen el análisis de composición química (análisis elemental e inmediato, determinación contenido en cenizas, medida pH, DRX, FT-IR, SEM / EDX) así como análisis de superficie (adsorción de N2 y CO2). En primer lugar los lodos caracterizados han sido sometidos a diferentes tratamientos térmicos de gasificación y pirólisis y los adsorbentes/ catalizadores obtenidos se han probado como adsorbentes para la eliminación de H2S. Como consecuencia de este estudio, se ha desechado el uso de uno de lodos (SC) puesto que se obtenían resultados muy similares a (SB), a continuación el estudio se centró en el lodo de SL. Con este objetivo se han preparado 12 muestras 6 de ellas pirolizadas y 6 gasificadas en el rango de temperaturas que comprende 600-1100 ºC. Posteriormente las muestras han sido caracterizadas y se ha determinado la capacidad de eliminación (x/M) del H2S. Los resultados muestran que hemos sido capaces de obtener unos materiales que si bien, presentan un bajo desarrollo de porosidad dan lugar a valores de capacidades de eliminación elevados y comparables a carbones y materiales adsorbentes comerciales (Centaur, Sorbalit). Las elevadas eficiencias de eliminación se atribuyen básicamente a la presencia de especies catalíticamente activas tales como los óxidos mixtos de calcio y hierro determinados por DRX en las muestras tratadas térmicamente. El segundo bloque de resultados se centra la mejora de las propiedades texturales de estos materiales adsorbentes. Con este objetivo se llevaron acabo procesos de activación física con CO2 y química con H3PO4 e hidróxidos alcalinos (NaOH y KOH), que hasta el momento no se había probado con este tipo de precursores. Los resultados indican que la activación física (CO2) y química (H3PO4) no son unos buenos métodos para la obtención de adsorbentes altamente porosos con este tipo de materia prima bajo las condiciones probadas, sin embargo la activación con hidróxidos alcalinos da lugar a materiales adsorbentes con superficies específicas de hasta 1600 m2g-1. En el caso de la activación con hidróxidos, tanto el incremento de la relación agente activante/ precursor como el incremento de la temperatura producen un descenso del rendimiento, al mismo tiempo que incrementan el valor de SBET. Los materiales resultantes de la activación con hidróxidos alcalinos se han probado como adsorbentes/ catalizadores para la eliminación de H2S. Los resultados indican que un incremento del área superficial no es indicativo de un aumento de la capacidad de eliminación dada la naturaleza ácida de estos materiales obtenidos. Con el fin de contrarrestar el efecto ácido de estos materiales se han realizado los mismos ensayos añadiendo NaOH al lecho de reacción llegando a valores de x/M de hasta 450 mgg-1. Posteriormente también se han realizado ensayos de eliminación de NH3 con algunas de estas muestras, y los resultados obtenidos de x/M son del orden de carbones activados comerciales. Los materiales adsorbentes obtenidos tras la activación con hidróxidos alcalinos se convierten en materiales muy atractivos para ser utilizados como adsorbentes/ catalizadores de múltiples contaminantes (COVs, Hg...).

Regional variation in cortical bone properties from broiler fowl - a first look

1. We used microhardness testing as a probe for fine-scale regional variation in the mechanical performance of bone and present data showing the extent of regional variation in the femora and humeri of 7-week-old broiler birds. 2. Ash content of dry bone was broadly correlated with microhardness, although there is some evidence that the relationship linking the two differs between the femur and the humerus. 3. Regional variations in the properties of bone from poultry are widely overlooked in the literature. Awareness of them is vital and existing measures of bone 'strength' may be misleading if local variation in properties is not taken into account when exploring the effects of nutrition and husbandry practices on bone mechanical performance.

Characterization of organic matter from composting of different residues by physicochemical and spectroscopic methods

Chemical and spectroscopic methods were used to characterize organic matter transformations during the composting process. Four different residue mixtures were studied: P1 - garden trimmings (GT) only, P2 - GT plus fresh cattle manure, P3 - GT plus orange pomace and P4 - GT plus filter cake. The thermophilic phase was not reached in PI compost, but the P2, P3 and P4 composts showed all three typical process phases. The thermophilic phase and CEC/C ratio stabilized after 90 days, while C/N ratio and the ash content stabilized after 60 days. The increasing E(4)/E(6) ratio indicated oxidation reactions occurring during the process in the material from P2, P3 and P4. The (13)C NMR and FTIR results suggested extraction of both pectin and lignin in the HA-like fraction. The CEC/C ratio, temperature and E(4)/E(6) ratio showed that within 90 days P2, P3 and P4 composts were humified. However, material from P1 did not show characteristics of humified compost. From these data, it is apparent that C/N ratio and ash content are not reliable methods for monitoring the composting process. (C) 2009 Elsevier Ltd. All rights reserved.

Contribuição ao estudo petrográfico e geoquímico dos carvões da jazida de Chico Lomã Santo Antônio da Patrulha

São apresentados os resultados dos estudos petrográfico e geoquímico dos carvões da jazida de Chico Lomã, localizada no município de Santo Antônio da Patrulha, no nordeste do Rio Grande da Sul, situada entre as jazidas de Morungava (limite oeste) e Santa Terezinha (limite leste). Na sondagem estudada - 02-TG-88-RS - foram identificadas 7 camadas e 5 leitos de carvão. Entre estes, apenas as camadas E e F apresentam suficiente extensão lateral para serem consideradas economicamente exploráveis. Os carvões são ricos em matéria mineral, constituída, principalmente, de argila. O grupo maceral mais freqüente é o da vitrinita. No que diz respeito aos microlitotipos, ocorre, em geral, o predomínio de carbominerita. Foram identificadas 3 associações de microlitotipos, determinando a existência das seguintes faciologias: ambiente telmático (predomínio de vitrita-clarita), limo-telmático (predomínio de carbargilita-vitrita) e límnico (predomínio de carbargilita-durita-trimacerita). Os carvões apresentam rank que varia de betuminoso alto volátil C/sub-betuminoso A a betuminoso alto volátil A (ASTM). A utilização tecnológica dos carvões das camadas E e F, na siderurgia, pode ser sugerida, mesmo considerando-se seu elevado teor em cinza, desde que sejam submetidos a processos de beneficiamento. Em relação aos argilo-minerais, constatou-se a presença de caolinita, aparentemente relacionada ao conteúdo da matéria orgânica, e do interestratificado ilita-montmorilonita, provavelmente de origem detrítica. Foram identificados 3 grupos de elementos traços : associados à fração orgânica (Co, Ge, Ni, V e Zr), elementos intermediários (Cr, Cu e Sr) e associados à fração inorgânica (B, Ba e Ga). Observou-se, também, que os elementos do primeiro grupo, de maneira geral, se enriquecem nos litotipos com maior conteúdo de vitrênio, ao contrário dos elementos do último grupo que tendem a se enriquecer no carvão fosco e nos folhelhos. Os estudos realizados indicam um paleoambiente de água doce, no qual, provavelmente, tenham ocorrido pequenas ingressões marinhas entre as fases de formação de turfa.