Use of Headed Reinforcement Bars in Contruction. A Theoretical Approach to Determine the Dimensions of Anchorage Plates and Experimental Tests on Knee Joints Subjected to a Closing Moment

In order to reduce costs and time while improving quality, durability and sustainability in structural concrete constructions, a widely used material nowadays, special care must be taken in some crucial phases of the project and execution, including the structure design and calculation, the dosage, dumping and curing of concrete: another important aspect is the proper design and execution of assembly plans and construction details. The framework, a name designating the whole reinforcement bars cage already assembled as shown in the drawings, can be made up of several components and implies higher or lower industrialization degree. The framework costs constitute about one third of the price per cubic meter placed in concrete works. The best solutions from all points of view are clearly those involving an easier processing to achieve the same goal, and consequently carrying a high degree of industrialization, meaning quality and safety in the work. This thesis aims to provide an indepth analysis of a relatively new type of anchoring by plate known as headed reinforcement bars, which can potentially replace standard or L-shaped hooks, improving the cleaning of construction details and enabling a faster, more flexible, and therefore a more economical assembly. A literature review on the topic and an overview of typical applications is provided, followed by some examples of specific applications in real projects. Since a strict theoretical formulation used to provide the design plate dimensions has not yet been put forward, an equation is proposed for the side-face blowout strength of the anchorage, based on the capacity of concrete to carry concentrated loads in cases in which no transverse reinforcement is provided. The correlation of the calculated ultimate load with experimental results available in the literature is given. Besides, the proposed formulation can be expanded to cases in which a certain development length is available: using a software for nonlinear finite element analysis oriented to the study of reinforced concrete, numerical tests on the bond-bearing interaction are performed. The thesis ends with a testing of eight corner joints subjected to a closing moment, held in the Structures Laboratory of the Polytechnic University of Madrid, aiming to check whether the design of such plates as stated is adequate for these elements and whether an element with plate-anchored reinforcement is equivalent to one with a traditional construction detail.

Regulation of microfilament organization and anchorage-independent growth by tropomyosin 1.

Variants of chemically immortalized Syrian hamster embryo cells that had either retained (supB+) or lost (supB-) the ability to suppress tumorigenicity when hybridized with a fibrosarcoma cell line were subcloned. Both supB cell types are nontumorigenic; however, the supB- but not supB+ cells exhibit conditional anchorage-independent growth. Alterations of actin microfilament organization were observed in supB- but not supB+ cells that corresponded to a significant reduction of the actin-binding protein tropomyosin 1 (TM-1) in subB- cells. To examine the possibility of a direct relationship between TM-1 expression and the subB- phenotype, subB+ cells were transfected with an expression vector containing the TM-1 cDNA in an antisense orientation. The antisense-induced reduction of TM-1 levels in supB+ clones caused a microfilament reorganization and conferred anchorage-independent growth potential that were indistinguishable from those characteristic of supB- cells. These data provide direct evidence that TM-1 regulates both microfilament organization and anchorage-independent growth and suggest that microfilament alterations are sufficient for anchorage-independent growth.

The anchorage function of CipA (CelL), a scaffolding protein of the Clostridium thermocellum cellulosome.

Enzymatic cellulose degradation is a heterogeneous reaction requiring binding of soluble cellulase molecules to the solid substrate. Based on our studies of the cellulase complex of Clostridium thermocellum (the cellulosome), we have previously proposed that such binding can be brought about by a special "anchorage subunit." In this "anchor-enzyme" model, CipA (a major subunit of the cellulosome) enhances the activity of CelS (the most abundant catalytic subunit of the cellulosome) by anchoring it to the cellulose surface. We have subsequently reported that CelS contains a conserved duplicated sequence at its C terminus and that CipA contains nine repeated sequences with a cellulose binding domain (CBD) in between the second and third repeats. In this work, we reexamined the anchor-enzyme mechanism by using recombinant CelS (rCelS) and various CipA domains, CBD, R3 (the repeat next to CBD), and CBD/R3, expressed in Escherichia coli. As analyzed by non-denaturing gel electrophoresis, rCelS, through its conserved duplicated sequence, formed a stable complex with R3 or CBD/R3 but not with CBD. Although R3 or CBD alone did not affect the binding of rCelS to cellulose, such binding was dependent on CBD/R3, indicating the anchorage role of CBD/R3. Such anchorage apparently increased the rCelS activity toward crystalline cellulose. These results substantiate the proposed anchor-enzyme model and the expected roles of individual CipA domains and the conserved duplicated sequence of CelS.

Partial collapse of a ventilated stone façade: Diagnosis and analysis of the anchorage system

The mechanical behaviour of transventilated façades performed by natural stone is necessarily based on the correct execution of both anchoring elements on the stone cladding as in the ones corresponding to the enclosure support, either with brick masonry walls or reinforced concrete walls. In the case studied in the present work, the origin of the damages suffered on the façade of a building located in Alcoy has been analyzed, where the detachment of part of the outer enclosure occurred. This enclosure is a transventilated façade formed by Bateig Blue stone tiles. To this end, “in situ” tests of the anchoring systems employed have been performed, as well as laboratory tests of mechanical characterization of the material and of different types of anchor, comparing these results with those obtained in both the simplified analytical models of continuum mechanics as developed by the Finite Element Method (FEM).

(Table 1) U and Th isotopic composition and 230Th ages of samples from the A1 and C1 corals of Legare Anchorage

The 14C reservoir age of the surface ocean was determined for two Holocene periods (4908-4955 and 3008-3066 calendar (cal) B.P.) using U/Th-dated corals from Biscayne National Park, Florida, United States. We found that the average reservoir ages for these two time periods (294 ± 33 and 291 ± 27 years, respectively) were lower than the average value between A.D. 1600 and 1900 (390 ± 60 years) from corals. It appears that the surface ocean was closer to isotopic equilibrium with CO2 in the atmosphere during these two time periods than it was during recent times. Seasonal d18O measurements from the younger coral are similar to modern values, suggesting that mixing with open ocean waters was indeed occurring during this coral's lifetime. Likely explanations for the lower reservoir age include increased stratification of the surface ocean or increased D14C values of subsurface waters that mix into the surface. Our results imply that a more correct reservoir age correction for radiocarbon measurements of marine samples in this location from the time periods ~3040 and ~4930 cal years B.P. is ~292 ± 30 years, less than the canonical value of 404 ± 20 years.

School bus seat restraint and seat anchorage system. Final report.

National Highway Traffic Safety Administration, Washington, D.C.

Booster seat evaluation: belt anchorage location effect and performance in rear-facing seats. Final report.

Mode of access: Internet.

Shoaling rates and related data from Knik Arm near Anchorage, Alaska /

"March 1976."

A group test for determining the anchorage points of food habits.

Mode of access: Internet.

Revision of New York anchorage regulations. Report to the secretary of commerce and labor. January 14, 1907 ...

Report by a committee appointed by the former secretary, consisting of Lawrence O. Murray, Eugene Tyler Chamberlain, Frank H. Newcomb, M.R.S. Mackenzie, Ira Harris.

Anchorage Library Competition, Anchorage, Alaska, 1981 (unbuilt project)

[Conceptual Sketch], untitled. Blue ink sketch on tracing paper, signed, 12 x 26 1/2 inches [from photographic copy by Lance Burgharrdt]

Anchorage Library Competition, Anchorage, Alaska, 1981 (unbuilt project)

[Conceptual Sketch], untitled. Blue, green and brown ink sketch on tracing paper, 18x34 inches [from photographic copy by Lance Burgharrdt]

HOXA1 is required for E-cadherin-dependent anchorage-independent survival of human mammary carcinoma cells

Forced expression of HOXA1 is sufficient to stimulate oncogenic transformation of immortalized human mammary epithelial cells and subsequent tumor formation. We report here that the expression and transcriptional activity of HOXA1 are increased in mammary carcinoma cells at full confluence. This confluence-dependent expression of HOXA1 was abrogated by incubation of cells with EGTA to produce loss of intercellular contact and rescued by extracellular addition of Ca2+. Increased HOXA1 expression at full confluence was prevented by an E-cadherin function-blocking antibody and attachment of non-confluent cells to a substrate by homophilic ligation of E-cadherin increased HOXA1 expression. E-cadherin-directed signaling increased HOXA1 expression through Rac1. Increased HOXA1 expression consequent to E-cadherin-activated signaling decreased apoptotic cell death and was required for E-cadherin-dependent anchorage-independent proliferation of human mammary carcinoma cells. HOXA1 is therefore a downstream effector of E-cadherin-directed signaling required for anchorage-independent proliferation of mammary carcinoma cells.

Enhanced anchorage of tissue-engineered cartilage using an osteoinductive approach

Articular cartilage injuries occur frequently in the knee joint. Several methods have been implemented clinically, to treat osteochondral defects but none have been able to produce a long term, durable solution. Photopolymerizable cartilage tissue engineering approaches appear promising; however, fundamentally, forming a stable interface between the tissue engineered cartilage and native tissue, mainly subchondral bone and native cartilage, remains a major challenge. The overall objective of this research is to find a solution for the current problem of dislodgment of tissue engineered cartilage at the defect site for the treatment of degraded cartilage that has been caused due to knee injuries or because of mild to moderate level of osteoarthritis. For this, an in-vitro model was created to analyze the integration of tissue engineered cartilage with the bone, healthy and diseased cartilage over time. We investigated the utility of hydroxyapatite (HA) nanoparticles to promote controlled bone-growth across the bone-cartilage interface in an in vitro engineered tissue model system using bone marrow derived stem cells. We also investigated the application of HA nanoparticles to promote enhance integration between tissue engineered cartilage and native cartilage both in healthy and diseased states. Samples incorporated with HA demonstrated significantly higher interfacial shear strength (at the junction between engineered cartilage and engineered bone and also with diseased cartilage) compared to the constructs without HA (p < 0.05), after 28 days of culture. These findings indicate that the incorporation of HA nanoparticles permits more stable anchorage of the injectable hydrogel-based engineered cartilage construct via augmented integration between bone and cartilage.^