The agroindustrial residue valorisation with high pressure CO2 within biorefinery concept

Dissertação para obtenção do Grau de Mestre em Engenharia Química e Bioquímica

Valorization of agroindustrial waste

The main objective of this work is the valorization of residues from agro-industry giving them an added value. The valorization was performed by using a "green" and sustainable solvent - supercritical fluid, in this case carbon dioxide. Two residues and one biomass were used to produce two different final products, thereby emphasizing the versatility of the waste recovery - spent coffee grounds and microalgae Chlorella protothecoides to produce biodiesel, and tomato pomace to extract carotenoids. In the first part of this work it was demonstrated the possibility to obtain a conversion of coffee spent grounds oil into biodiesel, through an enzymatic transesterification reaction, of 98.01% with the following operating conditions: molar ratio oil:methanol 1:24, residence time 0.8 min, pressure 25 MPa, temperature 313,15K. In this first phase, it was also used the microalgae Chlorella protothecoides, a biomass, to produce biodiesel and favorable results were obtained with this green process compared with a traditional process - basic catalysis / acid. In the second part of this work, by an extraction with supercritical CO2 it was obtained 3.38% oil from tomato pomace under the following conditions: pressure 35.1 MPa, temperature 313,15K. It was found that this oil contains various carotenoids: β-carotene, lutein and lycopene. The latter is present in larger amount.

Bioproduction of succinic acid from renewable feedstocks by Actinobacillus succinogenes 130Z

Succinic acid (SA) is a highly versatile building block that is used in a wide range of industrial applications. The biological production of succinic acid has emerged in the last years as an efficient alternative to the chemical production based on fossil fuels. However, in order to fully replace the competing petro-based chemical process from which it has been produced so far, some challenges remain to be surpassed. In particular, one main obstacle would be to reduce its production costs, mostly associated to the use of refined sugars. The present work is focused on the development of a sustainable and cost-e↵ective microbial production process based on cheap and renewable resources, such as agroindustrial wastes. Hence, glycerol and carob pods were identified as promising feedstocks and used as inexpensive carbon sources for the bioproduction of succinic acid by Actinobacillus succinogenes 130Z, one of the best naturally producing strains. Even though glycerol is a highly available carbon source, as by-product of biodiesel production, its consumption by A. succinogenes is impaired due to a redox imbalance during cell growth. However, the use of an external electron acceptor such as dimethylsulfoxide (DMSO) may improve glycerol metabolism and succinic acid production by this strain. As such, DMSO was tested as a co-substrate for glycerol consumption and concentrations of DMSO between 1 and 4% (v/v) greatly promoted glycerol consumption and SA production by this biocatalyst. Aiming at obtaining higher succinic acid yield and production rate, batch and fed-batch experiments were performed under controlled cultivation conditions. Batch experiments resulted in a succinic acid yield on glycerol of 0.95 g SA/g GLY and a production rate of 2.13 g/L.h, with residual production of acetic and formic acids. In fed-batch experiment, the SA production rate reached 2.31 g/L.h, the highest value reported in the literature for A. succinogenes using glycerol as carbon source. DMSO dramatically improved the conversion of glycerol by A. succinogenes and may be used as a co-substrate, opening new perspectives for the use of glycerol by this biocatalyst. Carob pods, highly available in Portugal as a residue from the locust bean gum industry, contain a significant amount of fermentable sugars such as sucrose, glucose and fructose and were also used as substrate for succinic acid production. Sugar extraction from raw and roasted carobs was optimized varying solid/water ratio and extraction time, maximizing sugar recovery while minimizing the extraction of polyphenols. Kinetic studies of glucose, fructose and sucrose consumption by A. succinogenes as individual carbon sources till 30 g/L were first determined to assess possible metabolic diferences. Results showed no significant diferences related to sugar consumption and SA production between the diferent sugars. Carob pods water extracts were then used as carbon source during controlled batch cultivations. (...)

Coupling organic substrate removal to methane production in a fully biological microbial electrolysis cell

Microbial electrolysis cells (MECs) are an innovative and emerging technique based on the use of solid-state electrodes to stimulate microbial metabolism for wastewater treatment and simultaneous production of value-added compounds (such as methane). This research studied the performance of a two-chamber MEC in terms of organic matter oxidation (at the anode) and methane production (at the cathode). MEC‟s anode had been previously inoculated with an activated sludge, whereas the cathode chamber inoculum was an anaerobic sludge (containing methanogenic microorganisms). During the experimentation, the bioanode was continuously fed with synthetic solutions in anaerobic basal medium, at an organic load rate (OLR) of around 1 g L-1 d-1, referred to the chemical oxygen demand (COD). At the beginning (Run I), the feeding solution contained acetate and subsequently (Run II) it was replaced with a more complex solution containing soluble organic compounds other than acetate. For both conditions, the anode potential was controlled at -0.1 V vs. standard hydrogen electrode, by means of a potentiostat. During Run I, over 80% of the influent acetate was anaerobically oxidized at the anode, and the resulting electric current was recovered as methane at the cathode (with a cathode capture efficiency, CCE, accounting around 115 %). The average energy efficiency of the system (i.e., the energy captured into methane relative to the electrical energy input) under these conditions was over 170%. However, reactor‟s performance decreased over time during this run. Throughout Run II, a substrate oxidation over 60% (on COD basis) was observed. The electric current produced (57% of coulombic efficiency) was also recovered as methane, with a CCE of 90%. For this run the MEC‟s average energy efficiency accounted for almost 170 %. During all the experimentation, a very low biomass growth was observed at the anode whereas ammonium was transferred through the cationic membrane and concentrated at the cathode. Tracer experiments and scanning electron microscopy analyses were also carried out to gain a deeper insight into the reactor performance and also to investigate the possible reasons for partial loss of performance. In conclusion, this research suggests the great potential of MEC to successfully treat low-strength wastewaters, with high energy efficiency and very low sludge production.

Bacterial cellulose as a novel substrate for retinal pigment epithelium cells transplantation in age-related macular degeneration

Tese de Doutoramento em Engenharia Química e Biológica.

Assessment of the properties to characterize the interface between clay brick substrate and strengthening mortar

The behaviour of masonry elements under in-plane and out-of-plane loads can be improved through the application of strengthening systems based on reinforcing overlays. After strengthening, the transition region between the original substrate and the strengthening layer is especially stressed, and premature failure of the strengthened masonry is reached if insufficient interfacial capacity is assured. Therefore, the assessment of the mechanical behaviour of the interface is critical to the development of the masonry strengthening system based on the application of strengthening overlays. In this research a method for the characterization of the interface behaviour between two different materials, a polypropylene fibre reinforced mortar (PFRM) and a ceramic brick used for masonry construction is presented. Direct shear tests were carried out in couplet specimens. Due to the orthotropic nature of the bricks surface, the shear load was applied along three different directions in order to perform an overall estimation of the interface behaviour. The peak and residual shear stresses, as well as the failure modes, were obtained at different levels of the normal stress. Based on these experimental results constitutive laws were assessed for the simulation of the interface mechanical behaviour based on the Mohr and Mohr-Coulomb failure criteria.

Acetylated bacterial cellulose coated with urinary bladder matrix as a substrate for retinal pigment epithelium

This work evaluated the effect of acetylated bacterial cellulose (ABC) substrates coated with urinary bladder matrix (UBM) on the behavior of Retinal Pigment Epithelium (RPE), as assessed by cell adhesion, proliferation and development of cell polarity exhibiting transepithelial resistance and polygonal shaped-cells with microvilli. Acetylation of bacterial cellulose (BC) generated a moderate hydrophobic surface (around 65°) while the adsorption of UBM onto these acetylated substrates did not affect significantly the surface hydrophobicity. The ABS substrates coated with UBM enabled the development of a cell phenotype closer to that of native RPE cells. These cells were able to express proteins essential for their cytoskeletal organization and metabolic function (ZO-1 and RPE65), while showing a polygonal shaped morphology with microvilli and a monolayer configuration. The coated ABC substrates were also characterized, exhibiting low swelling effect (between 1.52.0 swelling/mm3), high mechanical strength (2048 MPa) and non-pyrogenicity (2.12 EU/L). Therefore, the ABC substrates coated with UBM exhibit interesting features as potential cell carriers in RPE transplantation that ought to be further explored.

Lard as a suitable and cheap substrate for microbial lipids production by Yarrowia lipolytica

[Excerpt] Current agricultural and industrial practices have led to the generation of large amounts of various low-value or negative cost crude wastes, which are difficult and economically notattractive to treat and valorize. One important example of waste generation is animal fat, commonly found in tanning process and slaughterhouses. These wastes, in which the lipids are often the main and most problematic components, are not currently used effectively and there are almost no application methods to recover the respective value. (...)

Especies nativas del Centro de Argentina: potencial agroindustrial y perspectivas para la producción de energía y biocombustibles

La región centro de Argentina posee una elevada riqueza de especies nativas y endémicas, con potencial valor agroindustrial. Flourensia campestris y F. oolepis (Asteraceae), conforman comunidades denominadas "chilcales". Son reconocidas por sus usos tradicionales como aromática, tintórea, medicinal y para leña -en especial raíz- y presentan potencial aplicación en la agroindustria como insecticida, antimicrobiana, antifúngica y aleloquímica. Trabajos realizados en nuestro laboratorio con extractos acuosos de hojas secas de F. campestris demostraron un potente efecto herbicida sobre semillas de Lactuca sativa. Mediante el fraccionamiento biodirigido por CC y técnicas espectrales (GC-MS, IR, 1H-RMN, 13C-RMN, 2D-RMN) se pudo identificar la estructura molecular del ácido hamanásico ((4S, 8S)–7–carboxi–8–hidroxi- 1(2), 12(13)-dien-bisaboleno). Su presencia en F. campestris, y su actividad biológica, no habían sido descriptos con anterioridad y sugieren un potencial herbicida natural. En ambas especies se puede apreciar a simple vista su alto contenido en resinas, compuestos propuestos para reemplazar a los hidrocarburos en la fabricación de pinturas, pegamentos y adhesivos. Estudios preliminares en nuestro laboratorio señalan un contenido de entre un 20-40 % de resinas en la biomasa aérea de Flourensia, sin embargo, no existen al presente estudios sobre su composición química ni sobre su potencial aplicación industrial. Por otro lado, el desarrollo de cultivos energéticos, para la generación de electricidad por combustión de biomasa, constituye uno de los objetivos principales dentro de las políticas de energías renovables a nivel nacional (programa GENREN) y mundial. Las especies con mayor aptitud deben poseer altas tasas de crecimiento y un alto grado de tolerancia de adversidades bióticas y abióticas, lo que permitiría cultivarlos en áreas marginales para la agricultura tradicional, hechos que coinciden con las especies de Flourensia en estudio. Asimismo, el tratamiento térmico o pirólisis de biomasa proveniente de la agricultura es una de las alternativas de reutilización de la misma con distintos fines. Este pasivo ecológico puede ser transformado en productos de alto valor agregado. En base a lo expuesto, el objetivo general de este proyecto es investigar en las dos especies vegetales endémicas de Argentina y abundantes en la provincia de Córdoba, las características de los metabolitos secundarios en relación a su potencial aplicación agroquímica (herbicidas naturales), la composición de sus resinas para uso industrial y su rendimiento como materia prima de alta densidad energética para la cogeneración de electricidad y producción de biocombustible, en función del desarrollo de una agricultura sustentable. Para ello, el proyecto propone incrementar el rendimiento de la purificación de ácido hamanásico e identificar y cuantificar su presencia en otros órganos de F. campestris y en F.oolepis, con el objetivo de evaluar su efecto herbicida, mediante bioensayos en cápsulas de Petri, en especies cultivables y malezas. Los usos potenciales de las resinas se estudiarán en base a la identificación de sus compuestos químicos mediante su extracción y análisis espectrales (CG-MS). A través de la determinación del poder calorífico, contenido de cenizas y de nitrógeno de la biomasa aérea de las especies, se evaluará su rendimiento energético para emplear como biocombustible sólido en la cogeneración eléctrica, mientras que con la aplicación del método fast pyrolysis y análisis por CG-MS, se determinará su aplicación o su posterior modificación de acuerdo a las características del bio-oil deseado. El destino energético de las especies propuestas permitiría iniciar de manera rápida la etapa de domesticación y puesta en cultivo, y avanzar en el desarrollo de aplicaciones industriales más sofisticadas, como el aprovechamiento de sus propiedades bioactivas o el desarrollo de productos industriales basados en sus metabolitos secundarios.

Especies nativas del Centro de Argentina: potencial agroindustrial y perspectivas para la producción de energía y biocombustibles

La región centro de Argentina posee una elevada riqueza de especies nativas y endémicas, con potencial valor agroindustrial. Flourensia campestris y F. oolepis (Asteraceae), conforman comunidades denominadas "chilcales". Son reconocidas por sus usos tradicionales como aromática, tintórea, medicinal y para leña -en especial raíz- y presentan potencial aplicación en la agroindustria como insecticida, antimicrobiana, antifúngica y aleloquímica. Trabajos realizados en nuestro laboratorio con extractos acuosos de hojas secas de F. campestris demostraron un potente efecto herbicida sobre semillas de Lactuca sativa. Mediante el fraccionamiento biodirigido por CC y técnicas espectrales (GC-MS, IR, 1H-RMN, 13C-RMN, 2D-RMN) se pudo identificar la estructura molecular del ácido hamanásico ((4S, 8S)–7–carboxi–8–hidroxi- 1(2), 12(13)-dien-bisaboleno). Su presencia en F. campestris, y su actividad biológica, no habían sido descriptos con anterioridad y sugieren un potencial herbicida natural. En ambas especies se puede apreciar a simple vista su alto contenido en resinas, compuestos propuestos para reemplazar a los hidrocarburos en la fabricación de pinturas, pegamentos y adhesivos. Estudios preliminares en nuestro laboratorio señalan un contenido de entre un 20-40 % de resinas en la biomasa aérea de Flourensia, sin embargo, no existen al presente estudios sobre su composición química ni sobre su potencial aplicación industrial. Por otro lado, el desarrollo de cultivos energéticos, para la generación de electricidad por combustión de biomasa, constituye uno de los objetivos principales dentro de las políticas de energías renovables a nivel nacional (programa GENREN) y mundial. Las especies con mayor aptitud deben poseer altas tasas de crecimiento y un alto grado de tolerancia de adversidades bióticas y abióticas, lo que permitiría cultivarlos en áreas marginales para la agricultura tradicional, hechos que coinciden con las especies de Flourensia en estudio. Asimismo, el tratamiento térmico o pirólisis de biomasa proveniente de la agricultura es una de las alternativas de reutilización de la misma con distintos fines. Este pasivo ecológico puede ser transformado en productos de alto valor agregado. En base a lo expuesto, el objetivo general de este proyecto es investigar en las dos especies vegetales endémicas de Argentina y abundantes en la provincia de Córdoba, las características de los metabolitos secundarios en relación a su potencial aplicación agroquímica (herbicidas naturales), la composición de sus resinas para uso industrial y su rendimiento como materia prima de alta densidad energética para la cogeneración de electricidad y producción de biocombustible, en función del desarrollo de una agricultura sustentable. Para ello, el proyecto propone incrementar el rendimiento de la purificación de ácido hamanásico e identificar y cuantificar su presencia en otros órganos de F. campestris y en F.oolepis, con el objetivo de evaluar su efecto herbicida, mediante bioensayos en cápsulas de Petri, en especies cultivables y malezas. Los usos potenciales de las resinas se estudiarán en base a la identificación de sus compuestos químicos mediante su extracción y análisis espectrales (CG-MS). A través de la determinación del poder calorífico, contenido de cenizas y de nitrógeno de la biomasa aérea de las especies, se evaluará su rendimiento energético para emplear como biocombustible sólido en la cogeneración eléctrica, mientras que con la aplicación del método fast pyrolysis y análisis por CG-MS, se determinará su aplicación o su posterior modificación de acuerdo a las características del bio-oil deseado. El destino energético de las especies propuestas permitiría iniciar de manera rápida la etapa de domesticación y puesta en cultivo, y avanzar en el desarrollo de aplicaciones industriales más sofisticadas, como el aprovechamiento de sus propiedades bioactivas o el desarrollo de productos industriales basados en sus metabolitos secundarios.

The relation of the concentration of macronutrients in the substrate and in the foliage to cell wall thickness and cellulose concentration in the xylem of slash pine (Pinus elliotti)

Sand culture experiments, using a sub-irrigation technique, were installed in order to find out the effects of the macronutrients N, P, K, Ca, Mg and S on growth, aspect, mineral composition, length of fibers, thickness of cell wall and cellulose concentration in slash pine. The aim was to obtain, under controlled conditions, basic information which could eventually lead to practical means designed to increase the rate of growth and to make of slash pine a richer source of cellulose. Nitrogen, Phosphorus, Potassium Experiment A 3 x 3 x 3 factorial design with two replicates was used. Nitrogen was supplied initially at the levels of 25, 50 and 100 ppm; phosphorus was given at the rates of 5, 10 and 20 ppm; potassium was supplied at the rates of 25, 50 and 100 ppm; six months after the experiment was started the first level for each element was dropped to zero. Others macro and all micronutrients were supplied at uniform rates. Fifteen hours of illumination per day were provided. The experimental technique for growing the slash pine seedlings proved quite satisfactory. Symptoms of deficiency of nitrogen, phosphorus and potassium were observed, described and recorded in photographs and water colors. These informations will help to identify abnormalities which may appear under field conditions. Chemical analysis of the several plant parts, on the other hand, give a valuable means to assess the nutritional status of slash pine, thus confirming when needed, the visual diagnosis. The correctness of manurial pratices, on the other hand, can be judged with the help of the analytical data tabulated. Under the experimental conditions nitrogen caused the highest increases on growth, as measured by increments in height and dry weights, whereas the effects of phosphorus and potassium were less marked. Cellulose concentration was not significantly affected by the treatments used. Higher levels of N seemed to decrease both length of fiber elements and the thickness of cell wall. The effects of P and K were not well defined. Calcium, Magnesium, Sulfur Experiment A 3 x 3 x 3 factorial design with two replicates was used. Calcium was supplied initially at the levels of 12.5, 25 and 50 ppm; magnesium and sulfur were given at the rates of 6, 12.5 and 25 ppm. Other macro and micronutrients were supplied at uniform rates, common to all treatments. Three months after starting the experiment the first level for each element was dropped to zero. Symptoms of deficiency of calcium, magnesium and sulfur were observed, described and recorded as in the case of the previous experiment. Chemical analysis were made, both for mineral content and cellulose concentration. Length of fibers and thickness of cell wall were measured. Both calcium and magnesium increase height, sulfur failing to give significant response. Dry weight was beneficially affected by calcium and sulfur. The levels of calcium, magnesium and sulfur in the needles associated with deficiency and maximum growth are comparable with those found in the literature. Cellulose concentration increased when the level of sulfur in the substrate was raised. The thickness of cell wall was negatively affected by the treatments; no effect was observed with regards to length of fibers.

Finite element simulation of an impinging liquid droplet on a hot solid substrate

Magdeburg, Univ., Fak. für Mathematik, Diss., 2014

Role of divalent cations, pH, cytoskeleton componentes and surface charge on the adhesion of Trichomonas vaginalis to a polystyrene substrate

The process of adhesion of three different strains of Trichomonas vaginalis to a polystyrene substrate was analysed. The process of adhesion was dependent on the time of incubation and the pH of the phosphate-buffered solution (PBS) in which the parasites were suspended. The highest indices of adhesion were observed after an incubation time of 60 min at pH 6.6. The adhesion index increased when the parasites were incubated in the presence of culture media or when Ca++ or Mg++ was added to the PBS solution, whereas cytochalasin B, trypsin or neuraminidase reduced adhesion. Incubation of the parasites in the presence of poly-L-lysine facilitated the process of adhesion. Incubation of the parasites or polystyrene beads in the presence of poly-L-lysine led to important changes in their surface charge.