Negoziazioni intergenerazionali dell'autonomia abitativa in contesti di working class

Nell’ambito della riflessione sui processi di riproduzione e trasmissione intergenerazionale delle disuguaglianze sociali, la presente tesi dottorale propone un’analisi in prospettiva intersezionale dei percorsi verso l’indipendenza abitativa dei giovani bolognesi di origine popolare, e il ruolo svolto dalle loro famiglie in questi percorsi. Nell’approfondimento teorico si offre una ricostruzione del dibattito sociologico nazionale e internazionale sul tema delle disuguaglianze sociali e abitative delle giovani generazioni, nonché dello studio della classe sociale e i principali approcci presenti in letteratura. La ricerca sul campo si concentra, in particolare, sui modi in cui le famiglie appartenenti ad una determinata classe sociale, intesa nel senso conferito al termine da Bourdieu, negoziano e sostengono la transizione all’indipendenza abitativa dei loro figli. L’approfondimento empirico consiste in una ricerca qualitativa longitudinale retrospettiva, condotta nel bolognese nel 2013-2014 su un campione di famiglie working class. Ai giovani-adulti coinvolti e ai loro genitori è stato chiesto di ricostruire le loro biografie attraverso lo strumento delle life histories. La ricerca evidenzia il delinearsi di “micro sistemi economici” familiari specifici e creativi. Le molteplici forme di sostegno genitoriale nei percorsi di autonomizzazione dei figli, individuate nel corso dell’analisi del materiale raccolto, si innestano quindi all’interno di un più ampio sistema di supporto intergenerazionale, che continua anche dopo l’uscita dalla famiglia di origine, a conferma dello stretto legame che caratterizza le famiglie italiane. Nello studio una particolare attenzione viene rivolta alle logiche di legittimazione del sostegno genitoriale, adottate dalle famiglie per orientare i propri interventi di aiuto. Infine, mettendo a confronto la concezione di indipendenza dei giovani adulti con quella dei loro genitori, l’indagine rileva l’esistenza di una apparente contraddizione tra le rappresentazioni dell’indipendenza e dell’autonomia abitativa e i comportamenti attuati nella vita quotidiana, contraddizione che trova una risoluzione nella negoziazione, tra le due diverse generazioni, del concetto stesso di indipendenza.

Individual differences in working memory capacity explain the relationship between general discrimination ability and psychometric intelligence

The close association between psychometric intelligence and general discrimination ability (GDA), conceptualized as latent variable derived from performance on different sensory discrimination tasks, is empirically well-established but theoretically widely unclear. The present study contrasted two alternative explanations for this association. The first explanation is based on what Spearman (1904) referred to as a central function underlying this relationship in the sense of the g factor of intelligence and becoming most evident in GDA. In this case, correlations between different aspects of cognitive abilities, such as working memory (WM) capacity, and psychometric intelligence should be mediated by GDA if their correlation is caused by g. Alternatively, the second explanation for the relationship between psychometric intelligence and GDA proceeds from fMRI studies which emphasize the role of WM functioning for sensory discrimination. Given the well-known relationship between WM and psychometric intelligence, the relationship between GDA and psychometric intelligence might be attributed to WM. The present study investigated these two alternative explanations at the level of latent variables. In 197 young adults, a model in which WM mediated the relationship between GDA and psychometric intelligence described the data better than a model in which GDA mediated the relationship between WM and psychometric intelligence. Moreover, GDA failed to explain portions of variance of psychometric intelligence above and beyond WM. These findings clearly support the view that the association between psychometric intelligence and GDA must be understood in terms of WM functioning.

On the cup anemometer working condition monitoring

The analysis of the harmonic terms related to the rotational speed of a cup anemometer is a way to detect anomalies such as wear and tear, rotor non-symmetries (rotor damage) or problems at the output signal system. The research already done in this matter at the IDR/UPM Institute is now taken to cup anemometers working on the field. A 1-2 year testing campaign is being carried out in collaboration with Kintech Engineering. 2 Thies First Class Advanced installed at 58 m and 73 m height in a meteorology tower are constantly monitored. The results will be correlated to the anemometer performance evolution studied through several calibrations planned to be performed along the testing campaign.

Método experimental para la caracterización de las diferentes tecnologías de integración arquitectónica de la energía fotovoltaica en condiciones de funcionamiento real = Experimental method for characterization of several building integrated photovoltaic technologies under real working conditions

Hoy en día, el proceso de un proyecto sostenible persigue realizar edificios de elevadas prestaciones que son, energéticamente eficientes, saludables y económicamente viables utilizando sabiamente recursos renovables para minimizar el impacto sobre el medio ambiente reduciendo, en lo posible, la demanda de energía, lo que se ha convertido, en la última década, en una prioridad. La Directiva 2002/91/CE "Eficiencia Energética de los Edificios" (y actualizaciones posteriores) ha establecido el marco regulatorio general para el cálculo de los requerimientos energéticos mínimos. Desde esa fecha, el objetivo de cumplir con las nuevas directivas y protocolos ha conducido las políticas energéticas de los distintos países en la misma dirección, centrándose en la necesidad de aumentar la eficiencia energética en los edificios, la adopción de medidas para reducir el consumo, y el fomento de la generación de energía a través de fuentes renovables. Los edificios de energía nula o casi nula (ZEB, Zero Energy Buildings ó NZEB, Net Zero Energy Buildings) deberán convertirse en un estándar de la construcción en Europa y con el fin de equilibrar el consumo de energía, además de reducirlo al mínimo, los edificios necesariamente deberán ser autoproductores de energía. Por esta razón, la envolvente del edifico y en particular las fachadas son importantes para el logro de estos objetivos y la tecnología fotovoltaica puede tener un papel preponderante en este reto. Para promover el uso de la tecnología fotovoltaica, diferentes programas de investigación internacionales fomentan y apoyan soluciones para favorecer la integración completa de éstos sistemas como elementos arquitectónicos y constructivos, los sistemas BIPV (Building Integrated Photovoltaic), sobre todo considerando el próximo futuro hacia edificios NZEB. Se ha constatado en este estudio que todavía hay una falta de información útil disponible sobre los sistemas BIPV, a pesar de que el mercado ofrece una interesante gama de soluciones, en algunos aspectos comparables a los sistemas tradicionales de construcción. Pero por el momento, la falta estandarización y de una regulación armonizada, además de la falta de información en las hojas de datos técnicos (todavía no comparables con las mismas que están disponibles para los materiales de construcción), hacen difícil evaluar adecuadamente la conveniencia y factibilidad de utilizar los componentes BIPV como parte integrante de la envolvente del edificio. Organizaciones internacionales están trabajando para establecer las normas adecuadas y procedimientos de prueba y ensayo para comprobar la seguridad, viabilidad y fiabilidad estos sistemas. Sin embargo, hoy en día, no hay reglas específicas para la evaluación y caracterización completa de un componente fotovoltaico de integración arquitectónica de acuerdo con el Reglamento Europeo de Productos de la Construcción, CPR 305/2011. Los productos BIPV, como elementos de construcción, deben cumplir con diferentes aspectos prácticos como resistencia mecánica y la estabilidad; integridad estructural; seguridad de utilización; protección contra el clima (lluvia, nieve, viento, granizo), el fuego y el ruido, aspectos que se han convertido en requisitos esenciales, en la perspectiva de obtener productos ambientalmente sostenibles, saludables, eficientes energéticamente y económicamente asequibles. Por lo tanto, el módulo / sistema BIPV se convierte en una parte multifuncional del edificio no sólo para ser física y técnicamente "integrado", además de ser una oportunidad innovadora del diseño. Las normas IEC, de uso común en Europa para certificar módulos fotovoltaicos -IEC 61215 e IEC 61646 cualificación de diseño y homologación del tipo para módulos fotovoltaicos de uso terrestre, respectivamente para módulos fotovoltaicos de silicio cristalino y de lámina delgada- atestan únicamente la potencia del módulo fotovoltaico y dan fe de su fiabilidad por un período de tiempo definido, certificando una disminución de potencia dentro de unos límites. Existe también un estándar, en parte en desarrollo, el IEC 61853 (“Ensayos de rendimiento de módulos fotovoltaicos y evaluación energética") cuyo objetivo es la búsqueda de procedimientos y metodologías de prueba apropiados para calcular el rendimiento energético de los módulos fotovoltaicos en diferentes condiciones climáticas. Sin embargo, no existen ensayos normalizados en las condiciones específicas de la instalación (p. ej. sistemas BIPV de fachada). Eso significa que es imposible conocer las efectivas prestaciones de estos sistemas y las condiciones ambientales que se generan en el interior del edificio. La potencia nominal de pico Wp, de un módulo fotovoltaico identifica la máxima potencia eléctrica que éste puede generar bajo condiciones estándares de medida (STC: irradición 1000 W/m2, 25 °C de temperatura del módulo y distribución espectral, AM 1,5) caracterizando eléctricamente el módulo PV en condiciones específicas con el fin de poder comparar los diferentes módulos y tecnologías. El vatio pico (Wp por su abreviatura en inglés) es la medida de la potencia nominal del módulo PV y no es suficiente para evaluar el comportamiento y producción del panel en términos de vatios hora en las diferentes condiciones de operación, y tampoco permite predecir con convicción la eficiencia y el comportamiento energético de un determinado módulo en condiciones ambientales y de instalación reales. Un adecuado elemento de integración arquitectónica de fachada, por ejemplo, debería tener en cuenta propiedades térmicas y de aislamiento, factores como la transparencia para permitir ganancias solares o un buen control solar si es necesario, aspectos vinculados y dependientes en gran medida de las condiciones climáticas y del nivel de confort requerido en el edificio, lo que implica una necesidad de adaptación a cada contexto específico para obtener el mejor resultado. Sin embargo, la influencia en condiciones reales de operación de las diferentes soluciones fotovoltaicas de integración, en el consumo de energía del edificio no es fácil de evaluar. Los aspectos térmicos del interior del ambiente o de iluminación, al utilizar módulos BIPV semitransparentes por ejemplo, son aún desconocidos. Como se dijo antes, la utilización de componentes de integración arquitectónica fotovoltaicos y el uso de energía renovable ya es un hecho para producir energía limpia, pero también sería importante conocer su posible contribución para mejorar el confort y la salud de los ocupantes del edificio. Aspectos como el confort, la protección o transmisión de luz natural, el aislamiento térmico, el consumo energético o la generación de energía son aspectos que suelen considerarse independientemente, mientras que todos juntos contribuyen, sin embargo, al balance energético global del edificio. Además, la necesidad de dar prioridad a una orientación determinada del edificio, para alcanzar el mayor beneficio de la producción de energía eléctrica o térmica, en el caso de sistemas activos y pasivos, respectivamente, podría hacer estos últimos incompatibles, pero no necesariamente. Se necesita un enfoque holístico que permita arquitectos e ingenieros implementar sistemas tecnológicos que trabajen en sinergia. Se ha planteado por ello un nuevo concepto: "C-BIPV, elemento fotovoltaico consciente integrado", esto significa necesariamente conocer los efectos positivos o negativos (en términos de confort y de energía) en condiciones reales de funcionamiento e instalación. Propósito de la tesis, método y resultados Los sistemas fotovoltaicos integrados en fachada son a menudo soluciones de vidrio fácilmente integrables, ya que por lo general están hechos a medida. Estos componentes BIPV semitransparentes, integrados en el cerramiento proporcionan iluminación natural y también sombra, lo que evita el sobrecalentamiento en los momentos de excesivo calor, aunque como componente estático, asimismo evitan las posibles contribuciones pasivas de ganancias solares en los meses fríos. Además, la temperatura del módulo varía considerablemente en ciertas circunstancias influenciada por la tecnología fotovoltaica instalada, la radiación solar, el sistema de montaje, la tipología de instalación, falta de ventilación, etc. Este factor, puede suponer un aumento adicional de la carga térmica en el edificio, altamente variable y difícil de cuantificar. Se necesitan, en relación con esto, más conocimientos sobre el confort ambiental interior en los edificios que utilizan tecnologías fotovoltaicas integradas, para abrir de ese modo, una nueva perspectiva de la investigación. Con este fin, se ha diseñado, proyectado y construido una instalación de pruebas al aire libre, el BIPV Env-lab "BIPV Test Laboratory", para la caracterización integral de los diferentes módulos semitransparentes BIPV. Se han definido también el método y el protocolo de ensayos de caracterización en el contexto de un edificio y en condiciones climáticas y de funcionamiento reales. Esto ha sido posible una vez evaluado el estado de la técnica y la investigación, los aspectos que influyen en la integración arquitectónica y los diferentes tipos de integración, después de haber examinado los métodos de ensayo para los componentes de construcción y fotovoltaicos, en condiciones de operación utilizadas hasta ahora. El laboratorio de pruebas experimentales, que consiste en dos habitaciones idénticas a escala real, 1:1, ha sido equipado con sensores y todos los sistemas de monitorización gracias a los cuales es posible obtener datos fiables para evaluar las prestaciones térmicas, de iluminación y el rendimiento eléctrico de los módulos fotovoltaicos. Este laboratorio permite el estudio de tres diferentes aspectos que influencian el confort y consumo de energía del edificio: el confort térmico, lumínico, y el rendimiento energético global (demanda/producción de energía) de los módulos BIPV. Conociendo el balance de energía para cada tecnología solar fotovoltaica experimentada, es posible determinar cuál funciona mejor en cada caso específico. Se ha propuesto una metodología teórica para la evaluación de estos parámetros, definidos en esta tesis como índices o indicadores que consideran cuestiones relacionados con el bienestar, la energía y el rendimiento energético global de los componentes BIPV. Esta metodología considera y tiene en cuenta las normas reglamentarias y estándares existentes para cada aspecto, relacionándolos entre sí. Diferentes módulos BIPV de doble vidrio aislante, semitransparentes, representativos de diferentes tecnologías fotovoltaicas (tecnología de silicio monocristalino, m-Si; de capa fina en silicio amorfo unión simple, a-Si y de capa fina en diseleniuro de cobre e indio, CIS) fueron seleccionados para llevar a cabo una serie de pruebas experimentales al objeto de demostrar la validez del método de caracterización propuesto. Como resultado final, se ha desarrollado y generado el Diagrama Caracterización Integral DCI, un sistema gráfico y visual para representar los resultados y gestionar la información, una herramienta operativa útil para la toma de decisiones con respecto a las instalaciones fotovoltaicas. Este diagrama muestra todos los conceptos y parámetros estudiados en relación con los demás y ofrece visualmente toda la información cualitativa y cuantitativa sobre la eficiencia energética de los componentes BIPV, por caracterizarlos de manera integral. ABSTRACT A sustainable design process today is intended to produce high-performance buildings that are energy-efficient, healthy and economically feasible, by wisely using renewable resources to minimize the impact on the environment and to reduce, as much as possible, the energy demand. In the last decade, the reduction of energy needs in buildings has become a top priority. The Directive 2002/91/EC “Energy Performance of Buildings” (and its subsequent updates) established a general regulatory framework’s methodology for calculation of minimum energy requirements. Since then, the aim of fulfilling new directives and protocols has led the energy policies in several countries in a similar direction that is, focusing on the need of increasing energy efficiency in buildings, taking measures to reduce energy consumption, and fostering the use of renewable sources. Zero Energy Buildings or Net Zero Energy Buildings will become a standard in the European building industry and in order to balance energy consumption, buildings, in addition to reduce the end-use consumption should necessarily become selfenergy producers. For this reason, the façade system plays an important role for achieving these energy and environmental goals and Photovoltaic can play a leading role in this challenge. To promote the use of photovoltaic technology in buildings, international research programs encourage and support solutions, which favors the complete integration of photovoltaic devices as an architectural element, the so-called BIPV (Building Integrated Photovoltaic), furthermore facing to next future towards net-zero energy buildings. Therefore, the BIPV module/system becomes a multifunctional building layer, not only physically and functionally “integrated” in the building, but also used as an innovative chance for the building envelope design. It has been found in this study that there is still a lack of useful information about BIPV for architects and designers even though the market is providing more and more interesting solutions, sometimes comparable to the existing traditional building systems. However at the moment, the lack of an harmonized regulation and standardization besides to the non-accuracy in the technical BIPV datasheets (not yet comparable with the same ones available for building materials), makes difficult for a designer to properly evaluate the fesibility of this BIPV components when used as a technological system of the building skin. International organizations are working to establish the most suitable standards and test procedures to check the safety, feasibility and reliability of BIPV systems. Anyway, nowadays, there are no specific rules for a complete characterization and evaluation of a BIPV component according to the European Construction Product Regulation, CPR 305/2011. BIPV products, as building components, must comply with different practical aspects such as mechanical resistance and stability; structural integrity; safety in use; protection against weather (rain, snow, wind, hail); fire and noise: aspects that have become essential requirements in the perspective of more and more environmentally sustainable, healthy, energy efficient and economically affordable products. IEC standards, commonly used in Europe to certify PV modules (IEC 61215 and IEC 61646 respectively crystalline and thin-film ‘Terrestrial PV Modules-Design Qualification and Type Approval’), attest the feasibility and reliability of PV modules for a defined period of time with a limited power decrease. There is also a standard (IEC 61853, ‘Performance Testing and Energy Rating of Terrestrial PV Modules’) still under preparation, whose aim is finding appropriate test procedures and methodologies to calculate the energy yield of PV modules under different climate conditions. Furthermore, the lack of tests in specific conditions of installation (e.g. façade BIPV devices) means that it is difficult knowing the exact effective performance of these systems and the environmental conditions in which the building will operate. The nominal PV power at Standard Test Conditions, STC (1.000 W/m2, 25 °C temperature and AM 1.5) is usually measured in indoor laboratories, and it characterizes the PV module at specific conditions in order to be able to compare different modules and technologies on a first step. The “Watt-peak” is not enough to evaluate the panel performance in terms of Watt-hours of various modules under different operating conditions, and it gives no assurance of being able to predict the energy performance of a certain module at given environmental conditions. A proper BIPV element for façade should take into account thermal and insulation properties, factors as transparency to allow solar gains if possible or a good solar control if necessary, aspects that are linked and high dependent on climate conditions and on the level of comfort to be reached. However, the influence of different façade integrated photovoltaic solutions on the building energy consumption is not easy to assess under real operating conditions. Thermal aspects, indoor temperatures or luminance level that can be expected using building integrated PV (BIPV) modules are not well known. As said before, integrated photovoltaic BIPV components and the use of renewable energy is already a standard for green energy production, but would also be important to know the possible contribution to improve the comfort and health of building occupants. Comfort, light transmission or protection, thermal insulation or thermal/electricity power production are aspects that are usually considered alone, while all together contribute to the building global energy balance. Besides, the need to prioritize a particular building envelope orientation to harvest the most benefit from the electrical or thermal energy production, in the case of active and passive systems respectively might be not compatible, but also not necessary. A holistic approach is needed to enable architects and engineers implementing technological systems working in synergy. A new concept have been suggested: “C-BIPV, conscious integrated BIPV”. BIPV systems have to be “consciously integrated” which means that it is essential to know the positive and negative effects in terms of comfort and energy under real operating conditions. Purpose of the work, method and results The façade-integrated photovoltaic systems are often glass solutions easily integrable, as they usually are custommade. These BIPV semi-transparent components integrated as a window element provides natural lighting and shade that prevents overheating at times of excessive heat, but as static component, likewise avoid the possible solar gains contributions in the cold months. In addition, the temperature of the module varies considerably in certain circumstances influenced by the PV technology installed, solar radiation, mounting system, lack of ventilation, etc. This factor may result in additional heat input in the building highly variable and difficult to quantify. In addition, further insights into the indoor environmental comfort in buildings using integrated photovoltaic technologies are needed to open up thereby, a new research perspective. This research aims to study their behaviour through a series of experiments in order to define the real influence on comfort aspects and on global energy building consumption, as well as, electrical and thermal characteristics of these devices. The final objective was to analyze a whole set of issues that influence the global energy consumption/production in a building using BIPV modules by quantifying the global energy balance and the BIPV system real performances. Other qualitative issues to be studied were comfort aspect (thermal and lighting aspects) and the electrical behaviour of different BIPV technologies for vertical integration, aspects that influence both energy consumption and electricity production. Thus, it will be possible to obtain a comprehensive global characterization of BIPV systems. A specific design of an outdoor test facility, the BIPV Env-lab “BIPV Test Laboratory”, for the integral characterization of different BIPV semi-transparent modules was developed and built. The method and test protocol for the BIPV characterization was also defined in a real building context and weather conditions. This has been possible once assessed the state of the art and research, the aspects that influence the architectural integration and the different possibilities and types of integration for PV and after having examined the test methods for building and photovoltaic components, under operation conditions heretofore used. The test laboratory that consists in two equivalent test rooms (1:1) has a monitoring system in which reliable data of thermal, daylighting and electrical performances can be obtained for the evaluation of PV modules. The experimental set-up facility (testing room) allows studying three different aspects that affect building energy consumption and comfort issues: the thermal indoor comfort, the lighting comfort and the energy performance of BIPV modules tested under real environmental conditions. Knowing the energy balance for each experimented solar technology, it is possible to determine which one performs best. A theoretical methodology has been proposed for evaluating these parameters, as defined in this thesis as indices or indicators, which regard comfort issues, energy and the overall performance of BIPV components. This methodology considers the existing regulatory standards for each aspect, relating them to one another. A set of insulated glass BIPV modules see-through and light-through, representative of different PV technologies (mono-crystalline silicon technology, mc-Si, amorphous silicon thin film single junction, a-Si and copper indium selenide thin film technology CIS) were selected for a series of experimental tests in order to demonstrate the validity of the proposed characterization method. As result, it has been developed and generated the ICD Integral Characterization Diagram, a graphic and visual system to represent the results and manage information, a useful operational tool for decision-making regarding to photovoltaic installations. This diagram shows all concepts and parameters studied in relation to each other and visually provides access to all the results obtained during the experimental phase to make available all the qualitative and quantitative information on the energy performance of the BIPV components by characterizing them in a comprehensive way.

Gender inequalities in occupational health related to the unequal distribution of working and employment conditions: a systematic review

Introduction: Gender inequalities exist in work life, but little is known about their presence in relation to factors examined in occupation health settings. The aim of this study was to identify and summarize the working and employment conditions described as determinants of gender inequalities in occupational health in studies related to occupational health published between 1999 and 2010. Methods: A systematic literature review was undertaken of studies available in MEDLINE, EMBASE, Sociological Abstracts, LILACS, EconLit and CINAHL between 1999 and 2010. Epidemiologic studies were selected by applying a set of inclusion criteria to the title, abstract, and complete text. The quality of the studies was also assessed. Selected studies were qualitatively analysed, resulting in a compilation of all differences between women and men in the prevalence of exposure to working and employment conditions and work-related health problems as outcomes. Results: Most of the 30 studies included were conducted in Europe (n=19) and had a cross-sectional design (n=24). The most common topic analysed was related to the exposure to work-related psychosocial hazards (n=8). Employed women had more job insecurity, lower control, worse contractual working conditions and poorer self-perceived physical and mental health than men did. Conversely, employed men had a higher degree of physically demanding work, lower support, higher levels of effort-reward imbalance, higher job status, were more exposed to noise and worked longer hours than women did. Conclusions: This systematic review has identified a set of working and employment conditions as determinants of gender inequalities in occupational health from the occupational health literature. These results may be useful to policy makers seeking to reduce gender inequalities in occupational health, and to researchers wishing to analyse these determinants in greater depth.

Comparing Common Data Environment Platforms for Student Collaborative Working: A Case Study from Ulster University

PAS1192-2 (2013) outlines the “fundamental principles of Level 2 information modeling”, one of these principles is the use of what is commonly referred to as a Common Data Environment (CDE). A CDE could be described as an internet-enabled cloudhosting platform, accessible to all construction team members to access shared project information. For the construction sector to achieve increased productivity goals, the next generation of industry professionals will need to be educated in a way that provides them with an appreciation of Building Information Modelling (BIM) working methods, at all levels, including an understanding of how data in a CDE should be structured, managed, shared and published. This presents a challenge for educational institutions in terms of providing a CDE that addresses the requirements set out in PAS1192-2, and mirrors organisational and professional working practices without causing confusion due to over complexity. This paper presents the findings of a two-year study undertaken at Ulster University comparing the use of a leading industry CDE platform with one derived from the in-house Virtual Learning Environment (VLE), for the delivery of a student BIM project. The research methodology employed was a qualitative case study analysis, focusing on observations from the academics involved and feedback from students. The results of the study show advantages for both CDE platforms depending on the learning outcomes required.

Mutual perceptions of Asia and the EU/Europe. Media, elite and public opinion in Singapore and Germany. EU Centre in Singapore Working Paper No. 12, December 2012

In an increasingly interlinked and interdependent world, Europe and Asia are key players. Free trade agreements (FTAs), such as the ones the EU concluded with South Korea and Singapore, are indicative of strong mutual economic interests. It is therefore timely to take a closer look at the mutual perceptions of Asians and Europeans – not only at the governmental and policymaking levels, but also in terms of public opinion and the media. Drawing on data from an extensive research project led by the National Centre for Research on Europe (NCRE), New Zealand, the empirical study in this paper assesses the mutual perceptions of the EU/Europe and Asia, and their respective actors, focusing on two countries – Germany and Singapore. It seeks to do so through an analysis of the data collected from print and broadcast media, interviews with media practitioners, and the findings from public opinion surveys.

European antitrust control and standard setting. Bruegel Working Paper 2013/01, February 2012

Standards reduce production costs and increase products’ value to consumers. Standards however entail risks of anti-competitive abuse. After the adoption of a standard, the chosen technology normally lacks credible substitutes. The owner of the patented technology might thus have additional market power relative to locked-in licensees, and might exploit this power to charge higher access rates. In the economic literature this phenomenon is referred to as ‘hold-up’. To reduce the risk of hold-up, standard-setting organisations often require patent holders to disclose their standard-essential patents before the adoption of the standard and to commit to license on fair, reasonable and non-discriminatory (FRAND) terms. The European Commission normally investigates unfair pricing abuse in a standard-setting context if a patent holder who committed to FRAND ex-ante is suspected not to abide to it ex-post. However, this approach risks ignoring a number of potential abuses which are likely harmful for welfare. That can happen if, for example, ex-post a licensee is able to impose excessively low access rates (‘reverse hold-up’) or if a patent holder acquires additional market power thanks to the standard but its essential patents are not encumbered by FRAND commitments, for instance because the patent holder did not directly participate to the standard setting process and was therefore not required by the standard-setting organisations to commit to FRAND ex-ante. A consistent policy by the Commission capable of tackling all sources of harm should be enforced regardless of whether FRAND commitments are given. Antitrust enforcement should hinge on the identification of a distortion in the bargaining process around technology access prices, which is determined by the adoption of the standard and is not attributable to pro-competitive merits of any of the involved players.

The EMS Crisis of the 1990s: Parallels with the present crisis? CEPS Working Document No. 393, 28 March 2014

The EMS crisis of the 1990s illustrated the importance of a lack of confidence in price or exchange rate stability, whereas the present crisis illustrates the importance of a lack of confidence in fiscal sustainability. Theoretically the difference between the two should be minor since, in terms of the real return to an investor, the loss of purchasing power can be the same when inflation is unexpectedly high, or when the nominal value of government debt is cut in a formal default. Experience has shown, however, that expropriation via a formal default is much more disruptive than via inflation. The paper starts by providing a brief review of the EMS crisis, emphasising that the most interesting period might be the ‘post-EMS’ crisis of 1993-95. It then reviews in section 2 the crisis factors, comparing the EMS crisis to today’s euro crisis. Section 3 outlines the main analytical issue, namely the potential instability of high public debt within and outside a monetary union. Section 4 then compares the pressure on public finance coming from the crises for the case of Italy. Section 5 uses data on ‘foreign currency’ debt to disentangle expectations of devaluation/inflation from expectations of default. Section 6 concludes.

Inflation-Targeting, Flexible Exchange Rates and Macroeconomic Performance since the Great Recession. CEPS Working Document No. 394, March 2014

Has inflation targeting (IT) conferred benefits in terms of economic growth on countries that followed this particular monetary policy strategy during the crisis period 2007-12? This paper answers this question in the affirmative. Countries with an IT monetary regime with flexible exchange rates weathered the crisis much better than countries with other monetary regimes, predominantly countries with fixed exchange rates. Part of this difference in growth performance reflects differences in export performance during the initial years of the crisis, which in turn can be explained by real exchange rate depreciations. However, IT seems also to confer other benefits on the countries above and beyond the effects from currency depreciation.

Cameron’s reality check on Europe. EPIN [Working] Paper No. 38, 15 April 2014

Ever since Prime Minister David Cameron made his major speech on Europe on 23 January 2013, in which he argued for some kind of new deal between the UK and the EU, the rest of the EU as well as the British public have been wondering what he would actually propose in operational terms. On 15 March 2014, the Prime Minister offered at least an interim reply to these questions in an article in the Daily Telegraph newspaper. This paper extracts from the Daily Telegraph article the main ideas that the Prime Minister advances. In all, 10 propositions are identified, presented in the precise language used, followed by an appraisal. The article has not attracted so much attention, mainly because its content is not particularly sensational, but that is its real importance and quality. It points the way towards resolving what otherwise would mean a huge political crisis for the UK and the EU. The Prime Minister gave the overall impression that he is not now heading towards making an impossibly difficult list of demands. On the contrary, an informed and moderate realism seems to be in the making. The package outlined in this paper could be sold in Brussels. There would then have to be a robust communications campaign to sell it to the British public. This paper is part of a series for a CEPS-EPIN project on “The British Question and the Search for a Fresh European Narrative”, which is pegged to an ambitious ongoing exercise by the British government to review all the competences of the European Union. The intention is that this should provide a basis for informed debate before the referendum on the UK remaining in the EU or not, which is scheduled for 2017.

A Life Cycle Approach to Investor Protection. ECMI Working Paper No. 1/September 2014

The market for investment products, including both securities and investment funds, is fraught with difficulties for consumers in terms of the ease of comparing products, trust in suppliers and consumer satisfaction. A comprehensive approach to investor protection, developed around the lifecycle of a financial product, may offer the investor greater protection during an investment’s life span. This paper proposes a new approach to investor protection, building on a review of major market failures affecting the origination, distribution and sale of financial products and based on a review of the relevant scientific literature and country experiences. The application of a ‘know-your-product’ principle at origination, a narrower ‘default rule’ for best execution and an ex-ante distinction between advice and ‘information-only’ services are among the options discussed in this paper to enhance the investor protection framework over the lifecycle of a financial product.