Of tolerance in mice and men : studies in APECED and Aire

Autoimmune diseases affect 5 % of the population and come in many forms, such as diabetes, rheumatoid arthritis and MS. However, how and why autoimmune diseases arise are not yet fully resolved. In this thesis, the onset of autoimmunity was investigated using both patient samples and a mouse model of autoimmunity. Autoimmune diseases are usually complex, due to a number of different causative genes and environmental factors. However, a few monogenic autoimmune diseases have been described, which are caused by mutations in only one gene per disease. One of such disease is called APECED (autoimmune polyendocrinopathy-candidiasis-ectodermal dystrophy) and is enriched in the Finnish population. The causative gene behind APECED is named AIRE from AutoImmune REgulator. How malfunction of just one gene product can cause the multitude of disease components found in APECED is not yet resolved. This thesis sought out to find out more about the functions of AIRE, in order to reveal why APECED and other autoimmune diseases arise and what goes wrong? Usually, immune cells are taught to distinguish between self and non-self during their development. That way, immune cells can fight off bacteria and microbes while leaving the tissues and organs of the host organism itself unharmed. In APECED, the development of immune cells called αβ T cells is incomplete. The cells are not able to fully distinguish between self and non-self. This leads to autodestruction of self tissues and autoimmune disease. One of the achievements of this thesis was the finding that the development of another set of T cells called γδ T cells is not affected by AIRE in mice or in men. Instead, we found that another type of immune cell important in tolerance, called the dendritic cell is defective in APECED patients and is not able to respond to microbial stimulus in a normal fashion. Finally, we studied Aire-deficient mice and found that autoantibodies expressed in the mice were not targeted against the same molecules as those found in APECED patients. This indicates differences in the autoimmune pathology in mice and men. More work is still required before we understand the mechanisms of tolerance and autoimmunity well enough to be able to cure APECED, let alone the more complex autoimmune diseases. Yet altogether, the findings of this thesis work bring us one step closer to finding out why and how APECED and common autoimmune diseases arise.

Self-reported bruxism : Associated factors among media personnel with or without irregular shift work

Tutkimuksen kohderyhmänä oli mediatyöntekijöitä, joiden toimenkuva on viime vuosina muuttunut yhä kuormittavammaksi epäsäännöllisen vuorotyön sekä jatkuvien teknisten, organisatoristen ja taloudellisten tekijöiden ristipaineessa. Väitöskirjatutkimus on osa laajempaa tutkimushanketta, joka suunniteltiin selvittämään epäsäännöllisen vuorotyön mahdollisia haittoja. Tutkimusta tukivat taloudellisesti Työsuojelurahasto ja Suomen Hammaslääkäriseura Apollonia sekä resurssipanostuksin Hammaslääketieteen laitos (HY), Työterveyslaitos ja Yleisradio Oy. Bruksismi on tahdosta riippumatonta hampaiden narskuttelua tai yhteenpuristamista. Hampaiden narskuttelu on rytmistä jaksoittain toistuvaa puremalihasten toimintaa, joka esiintyy nukkuessa -tavallisimmin kevyen unen ja havahtumisjaksojen yhteydessä. Valveilla ollessa bruksismi on terveillä ihmisillä lähinnä hampaiden yhteenpuristamista. Yleisen käsityksen mukaan toistuvaa unibruksismia esiintyy noin 10 %:lla ja valveilla tapahtuvaa hampaiden yhteenpuristamista noin 20 %:lla. Aiemmin bruksismi kuului kansainvälisen unihäiriöluokituksen (ICSD 1997) mukaan unen erityishäiriöihin, mutta tuorein luokitus (ICSD 2005) listaa sen unen liikehäiriöihin. Väitöstutkimuksen yleisenä tavoitteena oli kartoittaa koetun bruksismin ja uni- valvehäiriöiden yhteyttä. Tutkimus oli poikittainen vertailututkimus epäsäännöllistä vuorotyötä ja säännöllisiä päivävuoroja tekevien välillä. Mielenkiinto kohdistui myös bruksismin ja kasvojen alueen kivun mahdolliseen yhteyteen. Lisäksi tutkimuksessa selvitettiin joidenkin tunnetusti unen laatua huonontavien psykososiaalisten, neurologisten ja fysiologisten tekijöiden yhteyttä koettuun bruksismiin. Tutkimuksen kohderyhmän muodosti 750 Yleisradion epäsäännöllistä vuorotyötä tekevää työntekijää. Vertailuryhmänä käytettiin samansuuruista satunnaistetusti valittua kaltaistettua Yleisradion työntekijäjoukkoa, joka tekee samankaltaista työtä, mutta säännöllisenä päivätyönä. Kohderyhmälle lähetettiin kyselylomakkeet, jotka kartoittivat koetun bruksismin lisäksi mm. tutkittavien taustatiedot, yleisen terveydentilan, yleisiä koettuja stressioireita ja tuntemuksia, kipuoireita, sekä unen laatua. Lisäksi esitettiin jaksamista ja työympäristöä koskevia kysymyksiä. Kyselyyn vastasi kaikkiaan 874 henkilöä. Kokonaisvastausprosentti oli 58,3 % (53,7 % miehiä). Epäsäännöllistä vuorotyötä tekevien vastausprosentti oli 82,3 % ja säännöllistä päivätyötä tekevien ryhmässä 34,3 %. Työtehtävät sisälsivät ohjelmien toimitus- ja tuottamistyötä, teknistä tuotanto- ja tukityötä, sekä esimies- ja hallintotyötä. Miesten keski-ikä vuorotyöryhmässä oli 45,0 (± 10,6) vuotta ja naisten keski-ikä 42,6 (± 10,7) vuotta, vastaavat luvut päivätyötä tekeville olivat 47,4 (± 9,7) ja 45,5 (± 10,1) vuotta. Vuorotyötä tekevistä oli miehiä 56,6 %, päivätyöryhmässä miehien osuus oli 46,7 %. Usein koettua bruksismia havaittiin koko tutkimusjoukossa 10,6 %:lla. Bruksismin esiintyvyydessä ei ollut merkitsevää eroa epäsäännöllistä vuorotyötä ja päivätyötä tekevien välillä. Kun bruksismia ja stressiä arvioitiin suhteessa tyytyväisyyteen nykyiseen työaikamuotoon, molemmat olivat merkitsevästi vallitsevimpia niillä, jotka halusivat vaihtaa nykyistä työaikamuotoaan. Epäsäännöllistä vuorotyötä tekevät lisäksi ilmoittivat kokevansa enemmän stressiä kuin päivätyötä tekevät sekä olivat tyytymättömämpiä työaikamuotoonsa. Tutkittavista henkilöistä katkonaista unta esiintyi 43,6 %:lla sekä 36,2 % koki unensa virkistämättömäksi. Kasvokipua esiintyi 19,6 %:lla. Usein toistuva bruksaus sekä tyytymättömyys työaikamuotoon olivat erittäin merkitsevästi yhteydessä unihäiriöiden sekä riittämättömän unen oireiden kanssa. Bruksismi ja katkonainen uni osoittautuivat myös kasvokivun taustatekijöiksi. Tutkimus osoitti, että koetulla bruksismilla oli merkitsevä yhteys unihäiriöihin, kasvokipuun, koettuun stressiin ja ahdistuneisuuteen, nuorempaan ikään, runsaampiin hammaslääkäri- ja lääkärikäynteihin sekä siihen että oli tyytymätön työaikamuotoonsa (itse työaikamuoto ei ollut merkitsevä tekijä). Tutkimuksen yhtenä johtopäätöksenä todettiin, että koettu bruksismi voi terveillä työikäisillä henkilöillä olla osa stressaavaa tilannetta ja siihen liittyvää käyttäytymistä. Tämän tiedostaminen terveydenhuollossa voisi olla hyödyllistä.

Rough Justice or Zero Tolerance? - Reassessing the Nature of Copyright in Light of Collective Licensing (Part I)

Starting point in the European individualistic copyright ideology is that an individual author creates a work and controls the use of it. However, this paper argues that it is (and has always been) impossible to control the use of works after their publication. This has also been acknowledged by the legislator, who has introduced collective licensing agreements because of this impossibility. Since it is impossible to rigorously control the use of works this writing "Rough Justice or Zero Tolerance - Reassessing the Nature of Copyright in Light of Collective Licensing" examines what reality of copyright is actually about. Finding alternative (and hopefully more "true") ways to understand copyright helps us to create alternative solutions in order to solve possible problems we have as it comes e.g. to use of content in online environment. The paper makes a claim that copyright is actually about defining negotiation points for different stakeholders and that nothing in the copyright reality prevents us from defining e.g. a new negotiation point where representatives of consumers would meet representatives of right holders in order to agree on the terms of use for certain content types in online environment.

Fault Tolerance on Large Scale Systems using Adaptive Process Replication

Exascale systems of the future are predicted to have mean time between failures (MTBF) of less than one hour. At such low MTBFs, employing periodic checkpointing alone will result in low efficiency because of the high number of application failures resulting in large amount of lost work due to rollbacks. In such scenarios, it is highly necessary to have proactive fault tolerance mechanisms that can help avoid significant number of failures. In this work, we have developed a mechanism for proactive fault tolerance using partial replication of a set of application processes. Our fault tolerance framework adaptively changes the set of replicated processes periodically based on failure predictions to avoid failures. We have developed an MPI prototype implementation, PAREP-MPI that allows changing the replica set. We have shown that our strategy involving adaptive process replication significantly outperforms existing mechanisms providing up to 20 percent improvement in application efficiency even for exascale systems.

Full retention schedule in FE

Jisc Freedom of Information retention schedules Disclaimer We aim to provide accurate and current information on this website. However, we accept no liability for errors or ommissions, or for loss or damage arising from using this information. The statements made and views expressed in publications are those of the authors and do not represent in any way the views of the Service. The JISC infoNet Service offers general guidance only on issues relevant to the planning and implementation of information systems. Such guidance does not constitute definitive or legal advice and should not be regarded as a substitute therefor. The JISC infoNet Service does not accept any liability for any loss suffered by persons who consult the Service whether or not such loss is suffered directly or indirectly as a result of reliance placed on guidance given by the Service. The reader is reminded that changes may have taken place since issue, particularly in rapidly changing areas such as internet addressing, and consequently URLs and e-mail addresses should be used with caution. We are not responsible for the content of other websites linked to this site. No part of this Web site or its contents may be reproduced or distributed in any form except by bona fide UK public sector education establishments or in accordance with the provisions of the Copyright, Designs and Patents Act 1988 and any amending legislation. All reproductions require an acknowledgement of the source and the author of the work. Parties outside the education sector should contact JISC infoNet regarding use of these materials.

The effects of operational and design parameters on the tolerance of ADSR fuel pin cladding to beam interruptions

This paper investigates the effects of design parameters, such as cladding and coolant material choices, and operational phenomena, such as creep and fission product decay heat, on the tolerance of Accelerator Driven Subcritical Reactor (ADSR) fuel pin cladding to beam interruptions. This work aims to provide a greater understanding of the integration between accelerator and nuclear reactor technologies in ADSRs. The results show that an upper limit on cladding operating temperature of 550 °C is appropriate, as higher values of temperature tend to accelerate creep, leading to cladding failure much sooner than anticipated. The effect of fission product decay heat is to reduce significantly the maximum stress developed in the cladding during a beam-trip-induced transient. The potential impact of irradiation damage and the effects of the liquid metal coolant environment on the cladding are discussed. © 2013 Elsevier Ltd. All rights reserved.

Investigation of growth and stress tolerance characteristics of Cronobacter spp.

Cronobacter spp. are opportunistic pathogens which can be isolated from a wide variety of foods and environments. They are Gram negative, motile, non-spore forming, peritrichous rods of the Enterobacteriaceae family. This food-borne pathogen is associated with the ingestion of contaminated infant milk formula (IMF), causing necrotizing enterocolitis, sepsis and meningitis in neonatal infants. The work presented in this thesis involved the investigation and characterisation of a bank of Cronobacter strains for their ability to tolerate physiologically relevant stress conditions that are commonly encountered in the gastrointestinal tract. While all strains were able to endure the suboptimal conditions tested, noteworthy variations were observed between strains. A collection of these strains were Lux-tagged to determine if their growth could be tracked in IMF by measuring bioluminescence. The resulting strains could be easily and reproducibly monitored in real time by measuring light emission. Following this a transposon mutagenesis library was created in one of the Lux-tagged strains of Cronobacter sakazakii. This library was screened for mutants with affected growth in milk. The majority of mutants identified were associated with amino acid metabolism. The final section of this thesis identified genes involved in the tolerance of C. sakazakii to the milk derived antimicrobial peptide, Lactoferricin B (Lfcin B). This was achieved by creating a transposon mutagenesis library in C. sakazakii and screening for mutants with increased susceptibility to Lfcin B. Overall this thesis demonstrates the variation between Cronobacter strains. It also identifies genes required for growth of the bacteria in milk, as well as genes needed for antimicrobial peptide tolerance.

Chronic opioid therapy and opioid tolerance: a new hypothesis.

Opioids are efficacious and cost-effective analgesics, but tolerance limits their effectiveness. This paper does not present any new clinical or experimental data but demonstrates that there exist ascending sensory pathways that contain few opioid receptors. These pathways are located by brain PET scans and spinal cord autoradiography. These nonopioid ascending pathways include portions of the ventral spinal thalamic tract originating in Rexed layers VI-VIII, thalamocortical fibers that project to the primary somatosensory cortex (S1), and possibly a midline dorsal column visceral pathway. One hypothesis is that opioid tolerance and opioid-induced hyperalgesia may be caused by homeostatic upregulation during opioid exposure of nonopioid-dependent ascending pain pathways. Upregulation of sensory pathways is not a new concept and has been demonstrated in individuals impaired with deafness or blindness. A second hypothesis is that adjuvant nonopioid therapies may inhibit ascending nonopioid-dependent pathways and support the clinical observations that monotherapy with opioids usually fails. The uniqueness of opioid tolerance compared to tolerance associated with other central nervous system medications and lack of tolerance from excess hormone production is discussed. Experimental work that could prove or disprove the concepts as well as flaws in the concepts is discussed.

Coursework uploads and zero-tolerance deadlines

Clear assessment deadlines and severe penalties for late submission of coursework are a feature of a number of UK universities. This presents a severe challenge for any online upload system. Evidence from a range of different implementations at the School of Computing and Mathematical Sciences at the University of Greenwich over the past few years is examined to assess the impact of a zero-tolerance deadline policy on the way students work and the problems that arise. Suggestions are made on how to minimise any possible negative impact of a zero-tolerance deadline policy on the administration of the system and on staff and students.

Using CAD parameter sensitivities for stack-up tolerance allocation

Tolerance allocation is an important step in the design process. It is necessary to produce high quality components cost-effectively. However, the process of allocating tolerances can be time consuming and difficult, especially for complex models. This work demonstrates a novel CAD based approach, where the sensitivities of product dimensions to changes in the values of the feature parameters in the CAD model are computed. These are used to automatically establish the assembly response function for the product. This information has been used to automatically allocate tolerances to individual part dimensions to achieve specified tolerances on the assembly dimensions, even for tolerance allocation in more than one direction simultaneously. It is also shown how pre-existing constraints on some of the part dimensions can be represented and how situations can be identified where the required tolerance allocation is not achievable. A methodology is also presented that uses the same information to model a component with different amounts of dimensional variation to simulate the effects of tolerance stack-up. © 2014 Springer-Verlag France.

Multi-μ: an Ada 95 based architecture for fault tolerance support of real-time systems

This paper presents an architecture (Multi-μ) being implemented to study and develop software based fault tolerant mechanisms for Real-Time Systems, using the Ada language (Ada 95) and Commercial Off-The-Shelf (COTS) components. Several issues regarding fault tolerance are presented and mechanisms to achieve fault tolerance by software active replication in Ada 95 are discussed. The Multi-μ architecture, based on a specifically proposed Fault Tolerance Manager (FTManager), is then described. Finally, some considerations are made about the work being done and essential future developments.

Heavy metal tolerance patterns of total heterotrophic bacteria isolated from the soils of Mahatma Gandhi University campus, Kottayam, Kerala

Industrialization of our society has led to an increased production and discharge of both xenobiotic and natural chemical substances. Many of these chemicals will end up in the soil. Pollution of soils with heavy metals is becoming one of the most severe ecological and human health hazards. Elevated levels of heavy metals decrease soil microbial activity and bacteria need to develop different mechanisms to confer resistances to these heavy metals. Bacteria develop heavy-metal resistance mostly for their survivals, especially a significant portion of the resistant phenomena was found in the environmental strains. Therefore, in the present work, we check the multiple metal tolerance patterns of bacterial strains isolated from the soils of MG University campus, Kottayam. A total of 46 bacterial strains were isolated from different locations of the campus and tested for their resistant to 5 common metals in use (lead, zinc, copper, cadmium and nickel) by agar dilution method. The results of the present work revealed that there was a spatial variation of bacterial metal resistance in the soils of MG University campus, this may be due to the difference in metal contamination in different sampling location. All of the isolates showed resistance to one or more heavy metals selected. Tolerance to lead was relatively high followed by zinc, nickel, copper and cadmium. About 33% of the isolates showed very high tolerance (>4000μg/ml) to lead. Tolerance to cadmium (65%) was rather low (<100 μg/ml). Resistance to zinc was in between 100μg/ml - 1000μg/ml and the majority of them shows resistance in between 200μg/ml - 500μg/ml. Nickel resistance was in between 100μg/ml - 1000μg/ml and a good number of them shows resistance in between 300μg/ml - 400μg/ml. Resistance to copper was in between <100μg/ml - 500μg/ml and most of them showed resistance in between 300μg/ml - 400μg/ml. From the results of this study, it was concluded that heavy metal-resistant bacteria are widely distributed in the soils of MG university campus and the tolerance of heavy metals varied among bacteria and between locations

Supporting co-operative work in apron control and resource management offices on airports

A high demand exists to increase the efficiency of present airport ground facilities and the co-ordination of traffic and services. The Traffic Office plays a crucial role in managing the airport. The main tasks of the Traffic Office is management of equipment, services, and ressources based on the flight schedule and resolving conflicts arising from deviations from the schedule. A new tool will support information exchange between Traffic Office and other facilities on the airport.

Implementing intelligent cores using processor virtualization for fault tolerance

Processor virtualization for process migration in distributed parallel computing systems has formed a significant component of research on load balancing. In contrast, the potential of processor virtualization for fault tolerance has been addressed minimally. The work reported in this paper is motivated towards extending concepts of processor virtualization towards ‘intelligent cores’ as a means to achieve fault tolerance in distributed parallel computing systems. Intelligent cores are an abstraction of the hardware processing cores, with the incorporation of cognitive capabilities, on which parallel tasks can be executed and migrated. When a processing core executing a task is predicted to fail the task being executed is proactively transferred onto another core. A parallel reduction algorithm incorporating concepts of intelligent cores is implemented on a computer cluster using Adaptive MPI and Charm ++. Preliminary results confirm the feasibility of the approach.

Intelligent agents for fault tolerance: from multi-agent simulation to cluster-based implementation

Recent research in multi-agent systems incorporate fault tolerance concepts, but does not explore the extension and implementation of such ideas for large scale parallel computing systems. The work reported in this paper investigates a swarm array computing approach, namely 'Intelligent Agents'. A task to be executed on a parallel computing system is decomposed to sub-tasks and mapped onto agents that traverse an abstracted hardware layer. The agents intercommunicate across processors to share information during the event of a predicted core/processor failure and for successfully completing the task. The feasibility of the approach is validated by simulations on an FPGA using a multi-agent simulator, and implementation of a parallel reduction algorithm on a computer cluster using the Message Passing Interface.