Seed lipases: sources, applications and properties - a review

This paper provides an overview regarding the main aspects of seed lipases, such as the reactions catalyzed, physiological functions, specificities, sources and applications. Lipases are ubiquitous in nature and are produced by several plants, animals and microorganisms. These enzymes exhibit several very interesting features, such as low cost and easy purification, which make their commercial exploitation as industrial enzymes a potentially attractive alternative. The applications of lipases in food, detergents, oils and fats, medicines and fine chemistry, effluent treatment, biodiesel production and in the cellulose pulp industry, as well as the main sources of oilseed and cereal seed lipases, are reviewed.

Foraging Behavior of the Swarm-founding Wasp Polybia (Trichothorax) sericea (Hymenoptera, Vespidae): Daily Resource Collection Activity and Flight Capacity

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Resources Taken to the Nest by Protopolybia exigua (Hymenoptera, Vespidae) in Different Phases of the Colony Cycle, in a Region of the Medio Sao Francisco River, Bahia, Brazil

The present study aimed to identify what resources were taken to the nest by workers of Protopolybia exigua (de Saussure), to verify if there is a relationship between physical factors of weather and phases of colony development and the collection of different resources and also to observe if the wasps carry macerated prey in the crop. The species collected nectar (62.8%), wood pulp for nest building (6.1%), water(2.9%), prey (0.8%) and resin (0.2%). Moreover, workers of P exigua do carry macerated prey in the crop. There was a positive correlation (r = 0.85, p = 0.0004) between the presence of larvae in the nest and the carrying of solid contents in the crop, which provides strong evidence that this species macerates its prey while still in the field, before taking it to the nest. There was positive influence of the temperature on the collection of nectar (r = 0.89, p = 0.0001) and water (r = 0.46, p = 0.0066) and negative influence of relative air humidity on the collection of the same resources (r = - 0.88, p = 0.0001 and r = - 0.37, p = 0.0160, respectively). Luminosity influenced the gathering of water (r = 0.43, p = 0.0089) and Pulp for nest building (r = 0.31, p = 0.0274) and the wind speed did nor influence the collection of any resources. Nectar is the main item taken to the nest during all phases of the colony.

Avaliação física e química da polpa de maracujá congelada comercializada na região de Bauru

A indústria de polpa de maracujá tem como objetivo a obtenção de produtos com características sensoriais e nutricionais próximas da fruta in natura. O objetivo deste trabalho foi avaliar as informações nutricionais das embalagens e as características físico-químicas das polpas de maracujá congeladas. Foram analisadas 25 amostras, de 07 marcas diferentes, adquiridas em supermercados de Bauru-SP, e região. Apenas uma das marcas analisadas (14,3%) encontra-se em acordo com a legislação vigente, sendo que as demais apresentam tabelas ultrapassadas ou incompletas. As características físico-químicas diferem entre as marcas comercializadas, principalmente quanto ao teor de ácido ascórbico, sendo que 64,0% das amostras se encontram em desarcordo com o Regulamento Técnico para Fixação dos Padrões de Identidade e Qualidade (PIQ) para polpa de maracujá do Ministério da Agricultura. As variações observadas entre a polpa in natura e a congelada são menores nos itens: densidade, pH, sólidos solúveis totais, acidez em ácido cítrico e ratio, mas altas quanto ao teor de ácido ascórbico.

Modelo de otimização para seleção de árvores matrizes de Eucalyptus grandis

Individual data of basic density and volume of wood, pulp kappa number, soluble lignin, cost of pulping process as well as gravimetric gross yield of pulping process were used from 64 trees of Eucalyptus grandis W. Hill ex Maiden from a commercial population at Lençóis Paulista, SP. The Eucalyptus grandis's seeds were originally from a Seed Production Area (SPA) of Duratex S/A at Botucatu, SP. Obtained data were quantified considering objective of maximization no-bleaching pulp and volume and mass wood restriction, mass of residual and soluble lignin, planted area and pulping process cost. it has also been aimed a selection method for matrix trees through mathematical programming techniques. Obtained strategy maximized the economical result, selected matrix trees and followed all limits of technological and organizing productivities imposed by the company. It also aimed the production of no-bleaching pulp within the planned time.

Polpação Kraft e Kraft/AQ da madeira de híbrido de Eucalyptus urograndis destinada à produção de polpa para dissolução

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Isolamento e caracterização de leveduras de Polybia ignobilis (Hymenoptera: Vespidae)

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Innovación sustentable: espacios para mejorar la competitividad de las PYMES argentinas

Incluye bibliografía.

Horários de atividade forrageadora e itens coletados por Protopolybia exigua (de Saussure) (Hymenoptera, Vespidae) na região do médio São Francisco, Bahia

Pós-graduação em Ciências Biológicas (Zoologia) - IBRC

Sistema fuzzy de suporte a decisão para aplicação de programa de eficiência energética em serrarias

Pós-graduação em Agronomia (Energia na Agricultura) - FCA

Eficiência energética em uma indústria madeireira

In wood processing industries, which use electrical equipment in the production process, in most cases these are badly scaled or operate under inadequate conditions, resulting directly in industrial energy efficiency, which proves important because besides having technological innovation, also with practices and policies, aims to decrease power consumption. So in a wiring project should take into account the variables that influence energy efficiency. Thus this work has been reviewed and subsequently calculated some of these variables, such as active power, power factor and demand for the entire industry (global) and also for specific equipment, the chipper. The network analysis was performed in a wood processing industry in the city of Taquarivaí - SP, and evaluated these variables with a network analyzer and also by analysis on energy bills, which were found in both analysis levels below those found in literature. These factors are due to poor design, improper use, storage of equipment or even by characteristic of the production process, ie, the equipment running on empty because of the volatility of production

Produção de polpa solúvel a partir de Eucalyptus urograndis

The wood of the gender Eucalyptus occupies a prominence place in relation to other cellulose sources, due to its chemical composition, its low cost, abundance and availability. The dissolving pulp obtaining occurs basically starting from three stages: prehydrolysis of the wood following by cooking and finally by the bleaching process. In the dissolving pulp production is necessary a pretreatment stage for the hemicelluloses removal. Among the chemical cooking processes, the Kraft process is the most used for cellulosic pulps production starting from eucalyptus, in the additive presence or not. The anthraquinone uses in the pulping process has as main purposes increasing the delignification rate as well as protecting the pulp regarding the degradation of the polysaccharide chains. The ECF bleaching process consists of the purification of the pulp through bleaching agents, being excepted the elementary chlorine. The dissolving pulp is a pulp of high a-cellulose content and purity destined to the cellulose derivatives production as carboxymethyl cellulose, nitrocellulose and microcrystalline cellulose. The production of a certain product, as well as its final application, is determined by the chemical properties of the pulp. The present work had as purpose producing cellulosic pulp with kappa number around 9 destined to the production of dissolving pulp in way to evaluate the use of the anthraquinone (AQ) in the Kraft process according to the chemical properties of the obtained pulps. It has been still intended developing an effective technology of bleaching for the high purity and quality dissolving pulp production. The prehydrolysis was accomplished in laboratory rotational autoclave for 30 minutes at 170ºC in the water:wood rate 3,5:1 (L:kg). The Kraft/AQ pulping were accomplished in laboratory rotational autoclave being initially modified the active alkali load (10, 13, 16 and 19%) at sulfidity of 25% ...

Viabilidade do aproveitamento de resíduos de madeira para produção de móveis

The need to use waste from wood processing industry grows due to environmental demands imposed by laws, so like the need to introduce more competitive products in the market (it means better quality and acceptable cost) who must submit by the rational use of raw material, usually turning waste to sub products, what adds higher value for that. To this research, specific case from Ribon Company, located on Camaçari, Bahia-Brazil, has been studied. It is a treated wood producer. Bulk of monthly wood logs there is 70 m3. Its yield is 71,43%, where bulk of generated waste is monthly 20m3. As an exploitation way from generated waste, it has been suggested some options like: erosion protection to specific areas, a wildlife shelter as an henhouse etc, recreational articles, coal, linings, treadmills. However this research will give focus to the furniture design made of waste. As a conclusion, there is very much need to assign new utilizations to that sub used materials, since there is significant amount to increase company’s productive yield

Análise do consumo de energia elétrica e da eficiência energética em uma indústria de processamento de madeira

In the industries of wood processing (sawmills), where timber is sawn in equipment such as band saws, circular saws, trowel, thicknessers, among others, that mechanically transform this resource and use of electric motors, which are not unusually poorly scaled working or overloaded, often a factor that is not found in these industries and has fundamental importance in the production process is energy efficiency that is achieved by both technological innovation and through all the practices and policies that aim to lower energy consumption, lowering energy costs and increasing the amount of energy offered no change in generation. For both during the design of an electrical installation, both overall and in various sectors of the installation, investigations are necessary, considerations and uses of variables and factors that put into practice the theme of energy efficiency. Therefore, in this paper, these factors were calculated and analyzed for a wood processing industry (sawmill) in the municipality of Taquarivaí - SP, namely: active power, power factor, demand factor and load factor. Where they were small in relation to the literature, these events that occur when devices are connected at the same time and due to the conditions of processing the wood, where the engines have large variations in electricity consumption during the unfolding of the same, due to efforts with the load and idle moments between each machining operation in the equipment