Improvement of hardwood drying schedules.

Drying regrowth native hardwoods to satisfactory moisture levels is a significant challenge for the processing industry. Dried quality is becoming increasingly important as sawn hardwood continues to move away from structural markets into appearance applications, but more difficult to achieve as the resource mix being processed becomes younger. An accurate, predictive drying model is a powerful tool in schedule development, decreasing the reliance on expensive, repetitive drying trials. This project updates the KilnSched drying model to allow the drying behaviour of regrowth blackbutt, jarrah, messmate, spotted gum and Victorian ash to be modeled more accurately. The effect of high temperature drying and humidity treatments on spotted gum were also investigated, as was the economics of various drying methods on spotted gum and blackbutt.

Moisture variation in dried hardwood timber.

The objectives of this project were to: 1. Understand why moisture gradients occur in Australian hardwoods during drying and their affects on the performance of timber in service; 2. Improve existing technology(ies) and/or processes to reduce moisture content (MC) variability between and within boards during drying of Australian hardwoods in an economical and practical manner.

The suitability of plantation thinnings as vineyard posts.

The aim of this project was to investigate the suitability of thinnings from a range of plantation species for use as vineyard posts. The hardwood plantation species examined were Eucalyptus grandis, E. globulus, E. pilularis, E. dunnii, E. cladocalyx and Corymbia maculata, while Acacia mearnsii was obtained from natural regrowth. The softwood plantation species were P. elliottii, P. radiata and Araucaria cunninghamii. Variables examined included: three air drying regimes; microwave conditioning of E. grandis and E. globulus; two preservative treatments for hardwoods (alkaline copper quaternary compound (ACQ) and pigment emulsified creosote (PEC)); and two preservative treatments for softwood species (ACQ and, for Pinus radiata copper chromium arsenic (CCA)). A further aim was to install treated posts in commercial vineyards for demonstration purposes. From an earlier trial of three hardwood species treated with PEC, demonstration posts previously installed were also to be inspected annually for three years, and any movement of polycyclic aromatic hydrocarbons (PAH) from the posts monitored.

Evaluation of super-heated steam vacuum drying viability and development of a predictive drying model for four Australian hardwood species.

The results of drying trials show that vacuum drying produces material of the same or better quality than is currently being produced by conventional methods within 41 to 66 % of the drying time, depending on the species. Economic analysis indicates positive or negative results depending on the species and the size of drying operation. Definite economic benefits exist by vacuum drying over conventional drying for all operation sizes, in terms of drying quality, time and economic viability, for E. marginata and E. pilularis. The same applies for vacuum drying C. citriodora and E. obliqua in larger drying operations (kiln capacity 50 m3 or above), but not for smaller operations at this stage. Further schedule refinement has the ability to reduce drying times further and may improve the vacuum drying viability of the latter species in smaller operations.

Processing small diameter logs from sub-tropical species

Small spindleless veneer lathe technology was used to produce veneer sheets as an alternative processing option to optimise the use of small log plantation resource. Thinned (300 spha) and unthinned control (1000 spha) plantings of 10.5-year-old Corymbia citriodora ssp. variegata (CCV) and E. dunnii (Dunn’s white gum) grown in two contrasting sites from climatic regions with large annual rainfall differences were studied. Overall veneer gross recoveries ranged from 50% to 70%, which were up to 3 times higher than typical sawn green-off saw recoveries from small plantation hardwood logs of similar diameter. Major limiting factors preventing veneer from meeting higher grades were the presence of kino defects and encased knots. Splits in E. dunnii veneer also contributed to reduced grade quality. Differences between two thinning treatments for veneer properties and grade recovery were generally small. There was significant evidence of site and species differences on veneer quality. The good quality site with higher rainfall in northern New South Wales produced denser and stiffer veneers with higher grade recoveries. CCV is a superior structural veneer species with high wood density and hardness as well as very good veneer stiffness exceeding 15,000 MPa but Dunn’s white gum has also demonstrated good potential as a useful structural plywood resource. Results indicate that relatively high veneer recoveries were achieved for the sub-tropical plantation hardwoods combined with very superior mechanical properties which suggest that veneer production have suitable attributes for a range of engineered wood products including plywood and laminated veneer lumber.

Gympie messmate (plantations)

Gympie messmate is an important commercial wood products tree in Queensland that produces high quality, strong, extremely durable and attractive timber. Although only small volumes are harvested from native forests in Queensland, it has a well-established market, and is in demand nationally. Gympie messmate timber from native forest has been used for a range of construction, engineering, appearance products and round timbers.

Hoop pine - Araucaria (plantations)

Hoop pine is a native species and a well-established commercial plantation tree in Queensland that produces a premium grade, quality tropical softwood. It is valued for uniform, knot-free timber with exceptional quality, and used for many commercially important wood products. Hoop pine has a well-established market and is in demand both nationally and internationally. High-grade sawn hoop pine serves the upper end of the domestic market, taking advantage of long lengths of clear wood, and exports include sawn wood and woodchip.

Carbon sequestration versus bioenergy: A case study from South India exploring the relative land-use efficiency of two options for climate change mitigation

This case study has been carried out as a comparison between two different land-use strategies for climate change mitigation, with possible application within the Clean Development Mechanisms. The benefits of afforestation for carbon sequestration versus for bioenergy production are compared in the context of development planning to meet increasing domestic and agricultural demand for electricity in Hosahalli village, Karnataka, India. One option is to increase the local biomass based electricity generation, requiring an increased biomass plantation area. This option is compared with fossil based electricity generation where the area is instead used for producing wood for non-energy purposes while also sequestering carbon in the soil and standing biomass. The different options have been assessed using the PRO-COMAP model. The ranking of the different options varies depending on the system boundaries and time period. Results indicate that, in the short term (30 years) perspective, the mitigation potential of the long rotation plantation is largest, followed by the short rotation plantation delivering wood for energy. The bioenergy option is however preferred if a long-term view is taken. Short rotation forests delivering wood for short-lived non-energy products have the smallest mitigation potential, unless a large share of the wood products are used for energy purposes (replacing fossil fuels) after having served their initial purpose. If managed in a sustainable manner all of these strategies can contribute to the improvement of the social and environmental situation of the local community. (C) 2009 Elsevier Ltd. All rights reserved.

The impact of FSC certification on timber tree regeneration and floristic composition in Honduran community forests

Forest certification has been put forward as a means to improve the sustainability of forest management in the tropical countries, where traditional environmental regulation has been inefficient in controlling forest degradation and deforestation. In these countries, the role of communities as managers of the forest resources is rapidly increasing. However, only a fraction of tropical community forests have been certified and little is known about the impacts of certification in these systems. Two areas in Honduras where community-managed forest operations had received FSC certifications were studied. Río Cangrejal represents an area with a longer history of use, whereas Copén is a more recent forest operation. Ecological sustainability was assessed through comparing timber tree regeneration and floristic composition between certified, conventionally managed and natural forests. Data on woody vegetation and environmental conditions was collected within logging gaps and natural treefall gaps. The regeneration success of shade-tolerant timber tree species was lower in certified than in conventionally managed forests in Río Cangrejal. Furthermore, the floristic composition was more natural-like in the conventionally managed than the certified forests. However, the environmental conditions indicated reduced logging disturbance in the certified forests. Data from Copén demonstrated that the regeneration success of light-demanding timber species was higher in the certified than the unlogged forests. In spite of this, the most valuable timber species Swietenia macrophylla was not regenerating successfully in the certified forests, due to rapid gap closure. The results indicate that pre-certification loggings and forest fragmentation may have a stronger impact on forest regeneration than current, certified management practices. The focus in community forests under low-intensive logging should be directed toward landscape connectivity and the restoration of degraded timber species, instead of reducing mechanical logging damage. Such actions are dependent on better recognition of resource rights, and improving the status of small Southern producers in the markets of certified wood products.

Evidence-based design of timber facades’.

Conference paper on a CD-Rom

Strength grading of sawn timber in Europe: an explanation for engineers and researchers.

This paper is a concise explanation of the normative background to strength grading in Europe, addressing important aspects that are commonly misunderstood by structural engineers and timber researchers. It also highlights changes that are being made to the standards to: incorporate requirements of the construction products regulations; add improvements to the system to accommodate the latest knowledge and technology; and widen the application of the standards. Where designs need to be optimised, there is an opportunity to use the system more intelligently, in combination with the latest technology, to better fit design values to the true properties of the timber resource. This can bring a design enhancement equivalent to effort improving other aspects of the structure, such as connectors and reinforcement. Parallel to this, researchers working on other aspects of structural improvement need to understand what grades really mean in respect of the properties of the timber, in order to correctly analyse the results of testing. It is also useful to know how techniques used in grading can assist with material properties characterisation for research. The amount of destructive testing involved in establishing machine grading settings and visual grading assignments presents a barrier to greater use of local timber, and diversification of commercial species, so it is important that any researcher assessing the properties of such species should consider, from the outset, doing the research in a way that can contribute to a grading dataset at a later date. This paper provides an overview of what is required for this.

Irish Timber – Characterisation, Potential and Innovation

In order to increase the utilisation of Irish timber in construction and novel engineered wood products, the mechanical and physical properties of the material must be established. For timber products used for structural applications, the fundamental properties are the modulus of elasticity, bending strength, density and dimensional stability, as these define the structural grade of the material. In order to develop engineering design models for applications such as reinforced timber, knowledge of the nonlinear stress-strain behaviour in compression is also required.
The paper presents the programme and results of an ongoing research project ‘Innovation in Irish Timber Usage’ which focuses on the characterisation of Sitka spruce as it is the most widely grown species in Ireland. In the past, a number of studies have been conducted to determine the properties of Irish-grown Sitka spruce. Nevertheless, due to the changes that have taken place in silvicultural practices since the publication of these studies, there is a need to determine how these properties have changed. This paper presents the data gathered from historical studies together with the results of an extensive test programme undertaken to characterise the properties of the present resource.
Moreover, the study preliminary examines the potential use of Irish grown Sitka spruce in novel timber products. Construction applications, such as fibre-reinforced polymer reinforced timber elements and connections, and cross-laminated timber are investigated.

FRP reinforcement of timber structures

Timber engineering has advanced over recent decades to offer an alternative to traditional materials and methods. The bonding of fibre reinforced plastics (FRP) with adhesives to timber structures for repair and strengthening has many advantages. However, the lack of established design rules has strongly restrained the use of FRP strengthening in many situations, where these could be a preferable option to most traditional techniques. A significant body of research has been carried out in recent years on the performance of FRP reinforced timber and engineered wood products. This paper gives a State of the Art summary of material formulations, application areas, design approaches and quality control issues for practical engineers to introduce on-site bonding of FRP to timber as a new way in design for structural repair and rehabilitation.

Pine wilt disease: a worldwide threat to forest ecosystems

The pinewood nematode (PWN), Bursaphelenchus xylophilus, the causal agent of pine wilt disease (PWD), is a serious pest and pathogen of forest tree species, in particular among the genus Pinus. It was first reported from Japan in the beginning of the XXth century, where it became the major ecological catastrophe of pine forests, with losses reaching over 2 million m3/ year in the 1980s. It has since then spread to other Asian countries such as China, Taiwan and Korea, causing serious losses and economic damage. In 1999, the PWN was first detected in the European Union (EU), in Portugal, and immmediately prompted several government (national and EU) actions to assess the extent of the nematode’s presence, and to contain B. xylophilus and its insect vector (Monochamus galloprovincialis) to an area with a 30km radius in the Setúbal Peninsula, 20 km south of Lisbon. International wood trade, with its political as well as economic ramifications, has been seriously jeopardized. The origin of the population of PWN found in Portugal remains elusive. Several hypotheses may be considered regarding pathway analysis, basically from two general origins: North America or the Far East (Japan or China). World trade of wood products such as timber, wooden crates, palettes, etc… play an important role in the potential dissemination of the pinewood nematode. In fact, human activities involving the movement of wood products may be considered the single most important factor in spreading of the PWN. Despite the dedicated and concerted actions of government agencies, this disease continues to spread. Very recently (2006), in Portugal, forestry and phytosanitary authorities (DGRF and DGPC) have announced a new strategy for the control and ultimately the erradication of the nematode, under the coordination of the national program for the control of the pinewood nematode (PROLUNP). Research regarding the bioecology of the nematode and insect as well as new detection methods, e.g., involving real-time PCR, has progressed since 1999. International agreements (GATT, WTO) and sharing of scientific information is of paramount importance to effectively control the nematode and its vector, and thus protect our forest ecosystems and forest economy.

Pine wilt disease: global issues, trade and economic impact

Pine wilt disease (PWD) is perhaps the most serious threat to pine forests worldwide. Since it´s discovery in the early XXth century by Japanese forest researchers, and the relationship with its causative agent, the pinewood nematode (PWN) Bursaphelenchus xylophilus, in the 1970s, PWD has wreaked havoc wherever it appears. Firstly in the Far East (Japan, China and Korea) and now, more recently in 1999, in the EU (Portugal). The forest sector in Portugal plays a major role in the Portuguese economy with a 12% contribution to the industrial gross domestic product, 3.2% of the gross domestic product, 10% of foreign trade and 5% of national employment. Maritime pine (Pinus pinaster) is one of the most important pine productions, and industrial activity, such as the production of wood and resin, as well as coastal protection associated with sand dunes. Also, stone pine (Pinus pinea) plays an important role in the economy with a share derived from the exports of high-quality pineon seed. Thus, the tremendous economical and ecological impact of the introduction of a pest and pathogen such as the PWN, although as far as is known, the only species susceptible to the nematode is maritime pine. Immediately following detection, the research team involved (Univ. Évora, INIAP) informed the national plant quarantine and forest authorities, which relayed the information to Brussels and the appropriate EU authorities. A task force (GANP), followed by a national program (PROLUNP) was established. Since then, national surveys have been taking place, involving MADRP (Ministry of Agriculture), the University of Évora and several private corporations (e.g. UNAC). Forest growers in the area are particularly interested and involved since the area owned by the growers organizations totals 700 000 ha, largely affected by PWD. Detection of the disease has led to serious consequences and restrictions regarding exploration and commercialization of wood. A precautionary phytosanitary strip, 3 km-wide, has been recently (2007) established surrounding the affected area. The Portuguese government, through its national program PROLUNP, has been deeply involved since 1999, and in conjunction with the EU (Permanent Phytosanitary Committee, and FVO) and committed to controlling this nematode and the potential spread to the rest of the country and to the rest of the EU. The global impact of the presence of Bursaphelenchus xylophilus or the threat of its introduction and the resulting pine wilt disease in forested areas in different parts of the world is of increasing concern economically. The concern is exacerbated by the prevailing debate on climate change and the putative impact this could have on the vulnerability of the world’s pine forests to this disease. The scientific and regulatory approach taken in different jurisdictions to the threat of pine wilt disease varies from country to country depending on the perceived vulnerability of their pine forests to the disease and/or to the economic cost due to lost trade in wood products. Much of the research surrounding pine wilt disease has been located in the northern hemisphere, especially in southern Europe and in the warmer, coastal, Asian countries. However, there is an increased focus on this problem also in those countries in the southern hemisphere where plantations of susceptible pine have been established over the years. The forestry sector in Australia and New Zealand are on “high alert” for this disease and are practicing strict quarantine procedures at all ports of entry for wood products. As well, there is heightened awareness, as there is worldwide, for the need to monitor wood packaging materials for all imported goods. In carrying out the necessary monitoring and assessment of products for B. xylophilus and its vectors substantial costs are incurred especially when decisions have to be made rapidly and regardless of whether the outcome is positive or negative. Australia’s response recently to the appearance of some dying pines in a plantation illustrated the high sensitivity of some countries to this disease. Some $200,000 was spent on the assessment in order to save a potential loss of millions of dollars to the disease. This rapid, co-ordinated response to the report was for naught, because once identified it was found not to be B. xylophilus. This illustrates the particular importance of taking the responsibility at all levels of management to secure the site and the need of a rapid, reliable diagnostic method for small nematode samples for use in the field. Australia is particularly concerned about the vulnerability of its 1million hectares of planted forests, 80% of which are Pinus species, to attack from incursions of one or more species of the insect vector. Monochamus alternatus incursions in wood pallets have been reported from Brisbane, Queensland. The climate of this part of Australia is such that the Pinus plantations are particularly vulnerable to the potential outcome of such incursions, and the state of Queensland is developing a risk management strategy and a proactive breeding programme in response to this putative threat. New Zealand has 1.6 million hectares of planted forests and 89% of the commercial forest is Pinus radiata. Although the climate where these forests are located tends to be somewhat cooler than that in Australia the potential for establishment and development of the disease in that country is believed to be high. The passage alone of 200,000 m³/year of wood packaging through New Zealand ports is itself sufficient to require response. The potential incursion of insect vectors of pinewood nematode through the port system is regarded as high and is monitored carefully. The enormous expansion of global trade and the continued use of unprocessed/inadequately-processed wood for packaging purposes is a challenge for all trading nations as such wood packaging material often harbours disease or pest species. The extent of this problem is readily illustrated by the expanding economies and exports of countries in south-east Asia. China. Japan and Korea have significant areas of forestland infested with B. xylophilus. These countries too are among the largest exporting countries of manufactured goods. Despite the attempts of authorities to ensure that only properly treated wood is used in the crating and packaging of goods B. xylophilus and/or its insect vector infested materials is being recorded at ports worldwide. This reminds us, therefore, of the ease with which this nematode pest can gain access to forest lands in new geographic locations through inappropriate use, treatment or monitoring of wood products. It especially highlights the necessity to find an alternative to using low-grade lumber for packaging purposes. Lest we should believe that all wood products are always carriers of B. xylophilus and its vectors, it should be remembered that international trade of all kinds has occurred for thousands of years and that lumber-born pests and diseases do not have worldwide distribution. Other physico-biological factors have a significant role in the occurrence, establishment and sustainability of a disease. The question is often raised as to why the whole of southern Europe doesn’t already have B. xylophilus and pine wilt disease. European countries have traded with countries that are infested with B. xylophilus for hundreds of years. Turkey is an example of a country that appears to be highly vulnerable to pine wilt disease due to its extensive forests in the warm, southern region where the vector, Monochamus galloprovincialis, occurs. However, there is no record of the presence of B. xylophilus occurring there despite the importation of substantial quantities of wood from several countries In many respects, Portugal illustrates both the challenge and the dilemma. In recent times B. xylophilus was discovered there in the warm coastal region. The research, administrative and quarantine authorities responded rapidly and B. xylophilus appears to have been confined to the region in which it was found. The rapid response would seem to have “saved the day” for Portugal. Nevertheless, it raises again the long-standing questions, how long had B. xylophilus been in Portugal before it was found? If Lisbon was the port of entry, which seems very likely, why had B. xylophilus not entered Lisbon many years earlier and established populations and the pine wilt disease? Will the infestation in Portugal be sustainable and will it spread or will it die out within a few years? We still do not have sufficient understanding of the biology of this pest to know the answers to these questions.