Landscape composition and climatic parameters significant in the spread of an invasive species (Pine wood Nematode)

Dissertação para obtenção do Grau de Mestre em Engenharia do Ambiente

MANGROVE BARK: A RENEWABLE RESIN SOURCE FOR WOOD ADHESIVES

From four solutions tested to extract tannins from mangrove bark for wood adhesives, hot water is recommended. Hot water extracted 21.4% of formaldehyde-hydrochloric acid reactive polyphenols on oven-dry bark basis.

Nutritional preferences of wood-feeding termites inhabiting floodplain forests of the Amazon River, Brazil

The alimentary preferences of five species of wood-feeding termites of the genus Nasutitermes that coexist in the inundated forests of the floodplains of the Amazon river várzea for species of fresh wood and for wood in different stages of decomposition was evaluated in laboratory tests. Wood of low density was generally preferred; the decay stages were preferred over fresh wood. The five termite species differ in the amplitude of their choices, indicating a strong differentiation in food choice among them. Differences in feeding preferences may be a niche-separating factor for these five Nasutitermes species of the floodplains.

Forest biomass and wood consumption In the lower course of the Amazon: a case study of rhe Urubueua Island

Várzea and terra-firme forests in the lower course of the Amazon were compared in terms of forest structure, wood volume increments and forest biomass. The wood volume of várzea forests was smaller than that of terra-firme forests, particularly when severe human intervention such as the cultivation of açaí palm occurred. The difference was even greater in the forest weight comparison because of the lower wood density of várzea trees. These trees are not directly influenced by water stress during the dry season, while late wood with a high density is formed in the terra-firme trees. The annual forest disappearance area due to firewood for tile factories was estimated to be about 276 ha on the island investigated, which had an area of 36,200 ha. Assuming that the forests are rotatively cultivated every 25 to 30 years, the total deforestation area is 6,870-6,948 ha in 25 years and 8,244~8,337 ha in 30 years. This result means that the balance between forest biomass and utilization is not in crisis, however, this balance might be lost as long as substitutive energy such as electricity is not supplied.

Wood density of trees in black water floodplains of Rio Jaú National Park, Amazonia, Brazil

The Jaú National Park is the largest protected forested area in the world. The Vitória Amazônica Foundation is working towards understanding its ecosystem, to which this paper contributes. Wood density was analysed in 27 common tree species growing in the blackwater flood-plains of the Rio Jaú, an affluent of the Rio Negro (Amazonia, Brazil). Wood was sampled with an increment borer. Mean wood density of the analysed species ranged from 0.35 to 0.87 g cm-3. The mean of all sampled species was 0.67 g cm-3 (st. dev. 0.13). Lowest density was found for Hevea spruceana with 0.32 g cm-3 and highest for Crudia amazonica with 0.9 g cm-3.

Wood specific gravity of trees and forest types in the southern Peruvian Amazon

Estimates of terrestrial biomass depend critically on reliable information about the specific gravity of the wood of forest trees. The study reported on here was carried out in the southern Peruvian Amazon and involved collection of wood samples from trees (70 spp.) in intact forest stands. Results demonstrate the high degree of variability in specific gravity (ovendry weight/green volume) in trees at single locations. Three forest types (swamp, high terrace forest with alluvial soil, and sandy-soil forest) had values close to the average reported for tropical forest woods (.69). Two early successional forest types, which make up as much as 12% of the total vegetated area in this part of the Amazon, had values significantly lower (.40). An increase in specific gravity with increasing age of the tree, which has been reported in some spe cies of tropical-forest woods, is seen in a positive relationship between specific gravity and di ameter for a species prevalent in one plot. Increases in specific gravity with tree and forest age may be significant in estimating changes in carbon stores over time.

Influence of the wood mechanical properties in the dovetail joint behavior

The force distribution inside a dovetail joint is complex. Wood is simultaneously loaded in different directions in the several connected surfaces. The analytical solutions available for the analysis of the behavior of those carpentry joints rely on the mechanical properties of wood. In particular, the stiffness properties of wood under compression are crucial for the forces equilibrium. Simulations showed that the stiffness values considered in each of the springs normally assumed in the analytical models, have great influence in the bearing capacity and stiffness of the dovetail joints, with important consequence on the stress distribution over the overall structure. In a wide experimental campaign, the properties under compression of the most common wood species of existing timber structures have been determined. Then, a solved example of a dovetail joint is presented assuming different wood species and the corresponding strength and stiffness properties values obtained in the tests.

Germinação de sementes e sobrevivência de plântulas de Himatanthus sucuuba (Spruce) Wood. em resposta ao alagamento, nas várzeas da Amazônia Central

Himatanthus sucuuba é uma espécie que coloniza as várzeas na Amazônia Central. O objetivo desse trabalho foi estudar as estratégias de adaptação da planta ao alagamento prolongado dessas áreas. Para tanto, foram acompanhados a germinação das sementes e o desenvolvimento das plântulas, simulando as condições naturais de campo (seca e alagamento). A germinação foi realizada em dois substratos: areia+serragem (não-alagado), e em água (alagado). Durante 120 dias, as plântulas geradas foram submetidas a três tratamentos: controle (irrigação diária), submersão parcial (sistema radicular) e submersão total. Foram analisadas as alterações na morfologia das plântulas, na anatomia das raízes e a atividade da enzima álcool desidrogenase (ADH), nos tempos: 0, 15, 30, 60, 90 e 120 dias. Foi constatado que a espécie apresenta elevada taxa de germinação e produção de plântulas, ambas acima de 80%, mesmo para sementes em água. Sob submersão parcial foram formadas lenticelas hipertrofiadas, raízes adventícias e aerênquima radicular. A atividade da ADH se manteve elevada até o 60º dia, com decréscimo após esse período. Plântulas sob submersão total perderam as folhas, não formaram raízes adventícias ou lenticelas, mas desenvolveram aerênquima. Estas plântulas apresentaram os maiores valores da ADH, que permaneceram altos até o término do experimento, indicando o desvio do metabolismo anaeróbico para produção de etanol como principal via para a manutenção da carga energética. Apesar de ter ocorrido a morte de algumas plântulas no tratamento de submersão total, o percentual de sobreviventes foi alto com 70% ao final dos 120 dias de duração do período experimental. Desta maneira, as plântulas de H. sucuuba modulam morfo-fisiologicamente a tolerância ao alagamento em função do tempo de exposição ao estresse e altura da coluna de água.

Sistema reprodutivo e polinização de Lepidagathis sessilifolia (Pohl) Kameyama ex Wassh. & J.R.I. Wood (Acanthaceae), em remanescente florestal da região sudoeste de Mato Grosso, Brasil

O gênero Lepidagathis apresenta distribuição pantropical com cerca de 100 espécies. No Brasil ocorrem 16 espécies, a maioria nas regiões Centro - Oeste e Sudeste. O estudo foi realizado em sub - bosque de remanescente florestal do município de Tangará da Serra - MT e teve como objetivo analisar a fenologia de floração, descrever a morfologia e biologia floral, verificar os visitantes florais e avaliar o sistema e o sucesso reprodutivo por meio de polinizações manuais. Lepidagathis sessilifolia apresenta inflorescências espiciformes, terminais, com cálice de cor rósea vistosa e corola de coloração branco-rósea. A floração ficou restrita aos meses de março a abril, durante a estação chuvosa. A senescência floral ocorreu após 24 ou 48 horas. A viabilidade dos grãos de pólen foi elevada (92,5%). O único polinizador observado visitando as flores de L. sessilifolia foi a abelha Partamona nhambiquara (Apidae - Meliponini). O sistema reprodutivo misto da espécie é caracterizado pela formação de frutos por meio de agamospermia, autopolinização e polinização cruzada. Esse sistema reprodutivo flexível é vantajoso, pois, garante a manutenção da espécie na área de estudo mesmo na ausência de polinizadores.

Valorization of eucalyptus wood by glycerol-organosolv pretreatment within the biorefinery concept: an integrated and intensified approach

The efficient utilization of lignocellulosic biomass and the reduction of production cost are mandatory to attain a cost-effective lignocellulose-to-ethanol process. The selection of suitable pretreatment that allows an effective fractionation of biomass and the use of pretreated material at high-solid loadings on saccharification and fermentation (SSF) processes are considered promising strategies for that purpose. Eucalyptus globulus wood was fractionated by organosolv process at 200 C for 69 min using 56% of glycerol-water. A 99% of cellulose remained in pretreated biomass and 65% of lignin was solubilized. Precipitated lignin was characterized for chemical composition and thermal behavior, showing similar features to commercial lignin. In order to produce lignocellulosic ethanol at high-gravity, a full factory design was carried to assess the liquid to solid ratio (3e9 g/g) and enzyme to solid ratio (8e16 FPU/g) on SSF of delignified Eucalyptus. High ethanol concentration (94 g/L) corresponding to 77% of conversion at 16FPU/g and LSR ¼ 3 g/g using an industrial and thermotolerant Saccharomyces cerevisiae strain was successfully produced from pretreated biomass. Process integration of a suitable pretreatment, which allows for whole biomass valorization, with intensified saccharification-fermentation stages was shown to be feasible strategy for the co-production of high ethanol titers, oligosaccharides and lignin paving the way for cost-effective Eucalyptus biorefinery.

Animate creation; popular edition of "Our living world" a natural history, by the Rev. J. G. Wood. Revised and adapted to American zoology, by Joseph B. Holder ...

2

A comparison of environmental licensing systems in operation in the wood panel manufacturing industry in the Northern Hemisphere

The objective of this thesis is to compare and contrast environmental licensing systems, for the wood panel industry, in a number of countries in order to determine which system is the best from an environmental and economic point of view. The thesis also examines the impact which government can have on industry and the type of licensing system in operation in a country. Initially, the thesis investigates the origins of the various environmental licensing systems which are in operation in Ireland, Scotland, Wales, France, USA and Canada. It then examines the Environmental Agencies which control and supervise industry in these countries. The impact which the type of government (i.e. unitary or federal) in charge in any particular country has on industry and the Regulatory Agency in that country is then described. Most of the mills in the thesis make a product called OSB (Oriented Strand Board) and the manufacturing process is briefly described in order to understand where the various emissions are generated. The main body of the thesis examines a number of environmental parameters which have emission limit values in the licenses examined, although not all of these parameters have emission limit values in all of the licenses. All of these parameters are used as indicators of the potential impact which the mill can have on the environment. They have been set at specific levels by the Environmental Agencies in the individual countries to control the impact of the mill. Following on from this, the two main types of air pollution control equipment (WESPs and RTOs) are described in regard to their function and capabilities. The mill licenses are then presented in the form of results tables which compare air results and water results separately. This is due to the fact that the most significant emission from this type of industry is to air. A matrix system is used to compare the licenses so that the comparison can be as objective as possible. The discussion examines all of the elements previously described and from this it was concluded that the IPC licensing system is the best from an environmental and economic point of view. It is a much more expensive system to operate than the other systems examined, but it is much more comprehensive and looks at the mill as a whole rather than fragmenting it. It was also seen that the type of environmental licensing system which is in place in a country can play a role in the locating of an industry as certain systems were seen to have more stringent standards attached to them. The type of standard in place in a country is in turn influenced by the type of government which is in place in that country.