Self-healing Techniques for RF and mm-Wave Transmitters and Receivers

With continuing advances in CMOS technology, feature sizes of modern Silicon chip-sets have gone down drastically over the past decade. In addition to desktops and laptop processors, a vast majority of these chips are also being deployed in mobile communication devices like smart-phones and tablets, where multiple radio-frequency integrated circuits (RFICs) must be integrated into one device to cater to a wide variety of applications such as Wi-Fi, Bluetooth, NFC, wireless charging, etc. While a small feature size enables higher integration levels leading to billions of transistors co-existing on a single chip, it also makes these Silicon ICs more susceptible to variations. A part of these variations can be attributed to the manufacturing process itself, particularly due to the stringent dimensional tolerances associated with the lithographic steps in modern processes. Additionally, RF or millimeter-wave communication chip-sets are subject to another type of variation caused by dynamic changes in the operating environment. Another bottleneck in the development of high performance RF/mm-wave Silicon ICs is the lack of accurate analog/high-frequency models in nanometer CMOS processes. This can be primarily attributed to the fact that most cutting edge processes are geared towards digital system implementation and as such there is little model-to-hardware correlation at RF frequencies.

All these issues have significantly degraded yield of high performance mm-wave and RF CMOS systems which often require multiple trial-and-error based Silicon validations, thereby incurring additional production costs. This dissertation proposes a low overhead technique which attempts to counter the detrimental effects of these variations, thereby improving both performance and yield of chips post fabrication in a systematic way. The key idea behind this approach is to dynamically sense the performance of the system, identify when a problem has occurred, and then actuate it back to its desired performance level through an intelligent on-chip optimization algorithm. We term this technique as self-healing drawing inspiration from nature's own way of healing the body against adverse environmental effects. To effectively demonstrate the efficacy of self-healing in CMOS systems, several representative examples are designed, fabricated, and measured against a variety of operating conditions.

We demonstrate a high-power mm-wave segmented power mixer array based transmitter architecture that is capable of generating high-speed and non-constant envelope modulations at higher efficiencies compared to existing conventional designs. We then incorporate several sensors and actuators into the design and demonstrate closed-loop healing against a wide variety of non-ideal operating conditions. We also demonstrate fully-integrated self-healing in the context of another mm-wave power amplifier, where measurements were performed across several chips, showing significant improvements in performance as well as reduced variability in the presence of process variations and load impedance mismatch, as well as catastrophic transistor failure. Finally, on the receiver side, a closed-loop self-healing phase synthesis scheme is demonstrated in conjunction with a wide-band voltage controlled oscillator to generate phase shifter local oscillator (LO) signals for a phased array receiver. The system is shown to heal against non-idealities in the LO signal generation and distribution, significantly reducing phase errors across a wide range of frequencies.

Automated vision tracking of project related entities

Tracking of project related entities such as construction equipment, materials, and personnel is used to calculate productivity, detect travel path conflicts, enhance the safety on the site, and monitor the project. Radio frequency tracking technologies (Wi-Fi, RFID, UWB) and GPS are commonly used for this purpose. However, on large-scale sites, deploying, maintaining and removing such systems can be costly and time-consuming. In addition, privacy issues with personnel tracking often limits the usability of these technologies on construction sites. This paper presents a vision based tracking framework that holds promise to address these limitations. The framework uses videos from a set of two or more static cameras placed on construction sites. In each camera view, the framework identifies and tracks construction entities providing 2D image coordinates across frames. Combining the 2D coordinates based on the installed camera system (the distance between the cameras and the view angles of them), 3D coordinates are calculated at each frame. The results of each step are presented to illustrate the feasibility of the framework.

Automated 3D Vision Tracking for Project Control Support

On-site tracking in open construction sites is often difficult because of the large amounts of items that are present and need to be tracked. Additionally, the amounts of occlusions/obstructions present create a highly complex tracking environment. Existing tracking methods are based mainly on Radio Frequency technologies, including Global Positioning Systems (GPS), Radio Frequency Identification (RFID), Bluetooth and Wireless Fidelity (Wi-Fi, Ultra-Wideband, etc). These methods require considerable amounts of pre-processing time since they need to manually deploy tags and keep record of the items they are placed on. In construction sites with numerous entities, tags installation, maintenance and decommissioning become an issue since it increases the cost and time needed to implement these tracking methods. This paper presents a novel method for open site tracking with construction cameras based on machine vision. According to this method, video feed is collected from on site video cameras, and the user selects the entity he wishes to track. The entity is tracked in each video using 2D vision tracking. Epipolar geometry is then used to calculate the depth of the marked area to provide the 3D location of the entity. This method addresses the limitations of radio frequency methods by being unobtrusive and using inexpensive, and easy to deploy equipment. The method has been implemented in a C++ prototype and preliminary results indicate its effectiveness

Ageing, Adaption and Accessibility: Time for the Inclusive Revolution!

Information and Communication Technology (ICT) is becoming increasingly central to many people’s lives, making it possible to be connected in any place at any time, be unceasingly and instantly informed, and benefit from greater economic and educational opportunities. With all the benefits afforded by these new-found capabilities, however, come potential drawbacks. A plethora of new PCs, laptops, tablets, smartphones, Bluetooth, the internet, Wi-Fi (the list goes on) expect us to know or be able to guess, what, where and when to connect, click, double-click, tap, flick, scroll, in order to realise these benefits, and to have the physical and cognitive capability to do all these things. One of the groups most affected by this increase in high-demand technology is older people. They do not understand and use technology in the same way that younger generations do, because they grew up in the simpler electro-mechanical era and embedded that particular model of the world in their minds. Any consequential difficulty in familiarising themselves with modern ICT and effectively applying it to their needs can also be exacerbated by age-related changes in vision, motor control and cognitive functioning. Such challenges lead to digital exclusion. Much has been written about this topic over the years, usually by academics from the area of inclusive product design. The issue is complex and it is fair to say that no one researcher has the whole picture. It is difficult to understand and adequately address the issue of digital exclusion among the older generation without looking across disciplines and at industry’s and government’s understanding, motivation and efforts toward resolving this important problem. To do otherwise is to risk misunderstanding the true impact that ICT has and could have on people’s lives across all generations. In this European year of Active Ageing and Solidarity between Generations and as the British government is moving forward with its Digital by Default initiative as part of a wider objective to make ICT accessible to as many people as possible by 2015, the Engineering Design Centre (EDC) at the University of Cambridge collaborated with BT to produce a book of thought pieces to address, and where appropriate redress, these important and long-standing issues. “Ageing, Adaption and Accessibility: Time for the Inclusive Revolution!” brings together opinions and insights from twenty one prominent thought leaders from government, industry and academia regarding the problems, opportunities and strategies for combating digital exclusion among senior citizens. The contributing experts were selected as individuals, rather than representatives of organisations, to provide the broadest possible range of perspectives. They are renowned in their respective fields and their opinions are formed not only from their own work, but also from the contributions of others in their area. Their views were elicited through conversations conducted by the editors of this book who then drafted the thought pieces to be edited and approved by the experts. We hope that this unique collection of thought pieces will give you a broader perspective on ageing, people’s adaption to the ever changing world of technology and insights into better ways of designing digital devices and services for the older population.

Access Point Association Coordination in Densely Deployed 802.11 Wireless Networks

Dense deployment of wireless local area network (WLAN) access points (APs) is an important part of the next generation Wi-Fi and standardization (802.11ax) efforts are underway. Increasing demand for WLAN connectivity motivates such dense deployments, especially in geographical areas with large numbers of users, such as stadiums, large enterprises, multi-tenant buildings, and urban cities. Although densification of WLAN APs guarantees coverage, it is susceptible to increased interference and uncoordinated association of stations (STAs) to APs, which degrade network throughput. Therefore, to improve network throughput, algorithms are proposed in this thesis to optimally coordinate AP associations in the presence of interference. In essence, coordination of APs in dense WLANs (DWLANs) is achieved through coordination of STAs' associations with APs. While existing approaches suggest tuning of APs' beacon powers or using transmit power control (TPC) for association control, here, the signal-to-interference-plus-noise ratio (SINRs) of STAs and the clear channel assessment (CCA) threshold of the 802.11 MAC protocol are employed. The proposed algorithms in this thesis enhance throughput and minimize coverage holes inherent in cell breathing and TPC techniques by not altering the transmit powers of APs, which determine cell coverage. Besides uncoordinated AP associations, unnecessary frequent transmission deferment is envisaged as another problem in DWLANs due to the clear channel assessment aspect of the carrier sensing multiple access collision avoidance (CSMA/CA) scheme in 802.11 standards and the short spatial reuse distance between co-channel APs. To address this problem in addition to AP association coordination, an algorithm is proposed for CCA threshold adjustment in each AP cell, such that CCA threshold used in one cell mitigates transmission deferment in neighboring cells. Performance evaluation reveals that the proposed association optimization algorithms achieve significant gain in throughput when compared with the default strongest signal first (SSF) association scheme in the current 802.11 standard. Also, further gain in throughput is observed when the CCA threshold adjustment is combined with the optimized association. Results show that when STA-AP association is optimized and CCA threshold is adjusted in each cell, throughput improves. Finally, transmission delay and the number of packet re-transmissions due to collision and contention significantly decrease.

Using smart people to form future mobile wireless networks

The concept of a body-to-body network, where smart communicating devices carried or worn by a person are used to form a wireless network with devices situated on other nearby persons. New innovations in this area will see the form factor of smart devices being modified, so that they may be worn on the human body or integrated into clothing, in the process creating a new generation of smart people. Applications of body-to-body networking will extend well beyond the support of cellular and Wi-Fi networks. They will also be used in short-range covert military applications, first responder applications, team sports and used to interconnect body area networks (BAN). Security will be a major issue as routing between multiple nodes will increase the risk of unauthorized access and compromise sensitive data. This will add complexity to the medium access layer (MAC) and network management. Antennas designed to operate in body centric communications systems may be broadly categorized as on- or off-body radiators, according to their radiation pattern characteristics when mounted on the human body.

Acesso banda larga sem fios em ambientes heterogéneos de próxima geração

O acesso ubíquo à Internet é um dos principais desafios para os operadores de telecomunicações na próxima década. O número de utilizadores da Internet está a crescer exponencialmente e o paradigma de acesso "always connected, anytime, anywhere" é um requisito fundamental para as redes móveis de próxima geração. A tecnologia WiMAX, juntamente com o LTE, foi recentemente reconhecida pelo ITU como uma das tecnologias de acesso compatíveis com os requisitos do 4G. Ainda assim, esta tecnologia de acesso não está completamente preparada para ambientes de próxima geração, principalmente devido à falta de mecanismos de cross-layer para integração de QoS e mobilidade. Adicionalmente, para além das tecnologias WiMAX e LTE, as tecnologias de acesso rádio UMTS/HSPA e Wi-Fi continuarão a ter um impacto significativo nas comunicações móveis durante os próximos anos. Deste modo, é fundamental garantir a coexistência das várias tecnologias de acesso rádio em termos de QoS e mobilidade, permitindo assim a entrega de serviços multimédia de tempo real em redes móveis. Para garantir a entrega de serviços multimédia a utilizadores WiMAX, esta Tese propõe um gestor cross-layer WiMAX integrado com uma arquitectura de QoS fim-a-fim. A arquitectura apresentada permite o controlo de QoS e a comunicação bidireccional entre o sistema WiMAX e as entidades das camadas superiores. Para além disso, o gestor de cross-layer proposto é estendido com eventos e comandos genéricos e independentes da tecnologia para optimizar os procedimentos de mobilidade em ambientes WiMAX. Foram realizados testes para avaliar o desempenho dos procedimentos de QoS e mobilidade da arquitectura WiMAX definida, demonstrando que esta é perfeitamente capaz de entregar serviços de tempo real sem introduzir custos excessivos na rede. No seguimento das extensões de QoS e mobilidade apresentadas para a tecnologia WiMAX, o âmbito desta Tese foi alargado para ambientes de acesso sem-fios heterogéneos. Neste sentido, é proposta uma arquitectura de mobilidade transparente com suporte de QoS para redes de acesso multitecnologia. A arquitectura apresentada integra uma versão estendida do IEEE 802.21 com suporte de QoS, bem como um gestor de mobilidade avançado integrado com os protocolos de gestão de mobilidade do nível IP. Finalmente, para completar o trabalho desenvolvido no âmbito desta Tese, é proposta uma extensão aos procedimentos de decisão de mobilidade em ambientes heterogéneos para incorporar a informação de contexto da rede e do terminal. Para validar e avaliar as optimizações propostas, foram desenvolvidos testes de desempenho num demonstrador inter-tecnologia, composta pelas redes de acesso WiMAX, Wi-Fi e UMTS/HSPA.

Dependable wireless real-time communications for open environments

Wireless communication technologies have become widely adopted, appearing in heterogeneous applications ranging from tracking victims, responders and equipments in disaster scenarios to machine health monitoring in networked manufacturing systems. Very often, applications demand a strictly bounded timing response, which, in distributed systems, is generally highly dependent on the performance of the underlying communication technology. These systems are said to have real-time timeliness requirements since data communication must be conducted within predefined temporal bounds, whose unfulfillment may compromise the correct behavior of the system and cause economic losses or endanger human lives. The potential adoption of wireless technologies for an increasingly broad range of application scenarios has made the operational requirements more complex and heterogeneous than before for wired technologies. On par with this trend, there is an increasing demand for the provision of cost-effective distributed systems with improved deployment, maintenance and adaptation features. These systems tend to require operational flexibility, which can only be ensured if the underlying communication technology provides both time and event triggered data transmission services while supporting on-line, on-the-fly parameter modification. Generally, wireless enabled applications have deployment requirements that can only be addressed through the use of batteries and/or energy harvesting mechanisms for power supply. These applications usually have stringent autonomy requirements and demand a small form factor, which hinders the use of large batteries. As the communication support may represent a significant part of the energy requirements of a station, the use of power-hungry technologies is not adequate. Hence, in such applications, low-range technologies have been widely adopted. In fact, although low range technologies provide smaller data rates, they spend just a fraction of the energy of their higher-power counterparts. The timeliness requirements of data communications, in general, can be met by ensuring the availability of the medium for any station initiating a transmission. In controlled (close) environments this can be guaranteed, as there is a strict regulation of which stations are installed in the area and for which purpose. Nevertheless, in open environments, this is hard to control because no a priori abstract knowledge is available of which stations and technologies may contend for the medium at any given instant. Hence, the support of wireless real-time communications in unmanaged scenarios is a highly challenging task. Wireless low-power technologies have been the focus of a large research effort, for example, in the Wireless Sensor Network domain. Although bringing extended autonomy to battery powered stations, such technologies are known to be negatively influenced by similar technologies contending for the medium and, especially, by technologies using higher power transmissions over the same frequency bands. A frequency band that is becoming increasingly crowded with competing technologies is the 2.4 GHz Industrial, Scientific and Medical band, encompassing, for example, Bluetooth and ZigBee, two lowpower communication standards which are the base of several real-time protocols. Although these technologies employ mechanisms to improve their coexistence, they are still vulnerable to transmissions from uncoordinated stations with similar technologies or to higher power technologies such as Wi- Fi, which hinders the support of wireless dependable real-time communications in open environments. The Wireless Flexible Time-Triggered Protocol (WFTT) is a master/multi-slave protocol that builds on the flexibility and timeliness provided by the FTT paradigm and on the deterministic medium capture and maintenance provided by the bandjacking technique. This dissertation presents the WFTT protocol and argues that it allows supporting wireless real-time communication services with high dependability requirements in open environments where multiple contention-based technologies may dispute the medium access. Besides, it claims that it is feasible to provide flexible and timely wireless communications at the same time in open environments. The WFTT protocol was inspired on the FTT paradigm, from which higher layer services such as, for example, admission control has been ported. After realizing that bandjacking was an effective technique to ensure the medium access and maintenance in open environments crowded with contention-based communication technologies, it was recognized that the mechanism could be used to devise a wireless medium access protocol that could bring the features offered by the FTT paradigm to the wireless domain. The performance of the WFTT protocol is reported in this dissertation with a description of the implemented devices, the test-bed and a discussion of the obtained results.

Geofencing Components and Existing Models

This paper describes the various Geofencing Components and Existing Models in terms of their Information Security Control Attribute Profiles. The profiles will dictate the security attributes that should accompany each and every Geofencing Model used for Wi-Fi network security control in an organization, thus minimizing the likelihood of malfunctioning security controls. Although it is up to an organization to investigate the best way of implementing information security for itself, by looking at the related models that have been used in the past this paper will present models commonly used to implement information security controls in the organizations. Our findings will highlight the strengths and weaknesses of the various models and present what our experiment and prototype consider as a robust Geofencing Security Model for securing Wi-Fi Networks

The SmartVision navigation prototype for the blind

The goal of the project "SmartVision: active vision for the blind" is to develop a small and portable but intelligent and reliable system for assisting the blind and visually impaired while navigating autonomously, both outdoor and indoor. In this paper we present an overview of the prototype, design issues, and its different modules which integrate a GIS with GPS, Wi-Fi, RFID tags and computer vision. The prototype addresses global navigation by following known landmarks, local navigation with path tracking and obstacle avoidance, and object recognition. The system does not replace the white cane, but extends it beyond its reach. The user-friendly interface consists of a 4-button hand-held box, a vibration actuator in the handle of the cane, and speech synthesis. A future version may also employ active RFID tags for marking navigation landmarks, and speech recognition may complement speech synthesis.

Reference clock design for low power and low phase noise with temperature compensation

Thesis (Ph.D.)--University of Washington, 2016-03

Use of negative information in positioning and tracking algorithms

To avoid additional hardware deployment, indoor localization systems have to be designed in such a way that they rely on existing infrastructure only. Besides the processing of measurements between nodes, localization procedure can include the information of all available environment information. In order to enhance the performance of Wi-Fi based localization systems, the innovative solution presented in this paper considers also the negative information. An indoor tracking method inspired by Kalman filtering is also proposed.

Non-uniform printed antenna array for wireless communications in sports arenas

Wireless communications had a great development in the last years and nowadays they are present everywhere, public and private, being increasingly used for different applications. Their application in the business of sports events as a means to improve the experience of the fans at the games is becoming essential, such as sharing messages and multimedia material on social networks. In the stadiums, given the high density of people, the wireless networks require very large data capacity. Hence radio coverage employing many small sized sectors is unavoidable. In this paper, an antenna is designed to operate in the Wi-Fi 5GHz frequency band, with a directive radiation pattern suitable to this kind of applications. Furthermore, despite the large bandwidth and low losses, this antenna has been developed using low cost, off-the-shelf materials without sacrificing quality or performance, essential to mass production. © 2015 EurAAP.

Determinantes à receptividade ao bluetooth marketing pelo consumidor português

Dissertação de Mestrado apresentada ao Instituto Superior de Contabilidade e Administração do Porto para a obtenção do grau de Mestre em Marketing Digital, sob orientação do Mestre Paulo Gonçalves e da Doutora Madalena Vilas Boas Esta versão não contém as críticas e sugestões dos elementos do júri

Swordfish: an Autonomous Surface Vehicle for Network Centric Operations

The design and development of the swordfish autonomous surface vehicle (ASV) system is discussed. Swordfish is an ocean capable 4.5 m long catamaran designed for network centric operations (with ocean and air going vehicles and human operators). In the basic configuration, Swordfish is both a survey vehicle and a communications node with gateways for broadband, Wi-Fi and GSM transports and underwater acoustic modems. In another configuration, Swordfish mounts a docking station for the autonomous underwater vehicle Isurus from Porto University. Swordfish has an advanced control architecture for multi-vehicle operations with mixed initiative interactions (human operators are allowed to interact with the control loops).