Vote with your feet : hyperlocal public polling for urban screens

Technological advances have led to an ongoing spread of public displays in urban areas. However, they still mostly show passive content such as commercials and digital signage. Researchers took notice of their potential to spark situated civic discourse in public space and have begun working on interactive public display applications. Attracting people’s attention and providing a low barrier for user participation have been identified as major challenges in their design. This thesis presents Vote With Your Feet, a hyperlocal public polling tool for urban screens allowing users to express their opinions. Similar to vox populi interviews on TV or polls on news websites, the tool is meant to reflect the mindset of the community on topics such as current affairs, cultural identity and local matters. It shows one Yes/No question at a time and enables users to vote by stepping on one of two tangible buttons on the ground. This user interface was introduced to attract people’s attention and to lower participation barriers. Vote With Your Feet was informed by a user-centred design approach that included a focus group, expert interviews and extensive preliminary user studies in the wild. Deployed at a bus stop, Vote With Your Feet was evaluated in a field study over the course of several days. Observations of people and interviews with 30 participants revealed that the novel interaction technology was perceived as inviting and that Vote With Your Feet can spark discussions among co-located people.

Vote with your feet : local community polling on urban screens

Falling prices have led to an ongoing spread of public displays in urban areas. Still, they mostly show passive content such as commercials and digital signage. At the same time, technological advances have enabled the creation of interactive displays potentially increasing their attractiveness for the audience, e.g. through providing a platform for civic discourse. This poses considerable challenges, since displays need to communicate the opportunity to engage, motivate the audience to do so, and be easy to use. In this paper we present Vote With Your Feet, a hyperlocal public polling tool for urban screens allowing users to express their opinions. Similar to vox populi interviews on TV or polls on news websites, the tool is meant to reflect the mindset of the community on topics such as current affairs, cultural identity and local matters. It is novel in that it focuses on a situated civic discourse and provides a tangible user interface, tackling the mentioned challenges. It shows one Yes/No question at a time and enables users to vote by stepping on one of two tangible buttons on the ground. This user interface was introduced to attract people’s attention and to lower participation barriers. Our field study showed that Vote With Your Feet is perceived as inviting and that it can spark discussions among co-located people.

Evaluation of the Australian Performing Arts Market 2014-2018 - Year One Report

The Australia Council awarded the tender of APAMs 2014, 2016 and 2018 to the Brisbane Powerhouse. The Australia Council, in awarding the contract for the presentation of APAM by Brisbane Powerhouse, stipulated that a formal evaluation of the three iterations of APAM and activity in the intervening years be undertaken. Queensland University of Technology, Creative Industries Faculty, under the leadership of Associate Professor Sandra Gattenhof, were contracted to undertake the formal evaluation. This is the first year report on the Brisbane iteration of the Market. This report has drawn from data collected across a range of sources, drawing on the scoping study undertaken by Justin Macdonnell addressing the Market from 1994–2010; the tender document submitted by the Brisbane Powerhouse; in-person interviews with APAM staff, APAM Stakeholders, Vox Pops from delegates in response to individual sessions, producer company/artist case studies and, most significantly, responses from a detailed online survey sent to all delegates. The main body of the report is organised around three key research aims, as outlined in the Brisbane Powerhouse Tender document (2011). These have been articulated as: Evaluation of international market development outcomes through showcasing work to targeted international presenters and agents Evaluation of national market development outcomes through showcasing work to national presenters and producers Evaluation of the exchange ideas, dialogue, skill 
development, partnerships, collaborations and co- productions and networks with local and international peers. The culmination of the data analysis has been articulated through five key recommendations, which may assist the APAM delivery team for the next version, in 2016. In summary, the recommendations are described as: 1. Indigenous focus to remain central to the conception and delivery of APAM 2. Re-framing APAM’s function and its delivery 3. Logistics and communications in a multi-venue approach, including communications and housekeeping, volunteers, catering, re-calibrating the employment of Brisbane Powerhouse protocols and processes for APAM 4. Presentation and promotion for presenters 5. Strategic targeting of Asian producers.

A comprehensive ovine model of blood transfusion

Background The growing awareness of transfusion-associated morbidity and mortality necessitates investigations into the underlying mechanisms. Small animals have been the dominant transfusion model but have associated limitations. This study aimed to develop a comprehensive large animal (ovine) model of transfusion encompassing: blood collection, processing and storage, compatibility testing right through to post-transfusion outcomes. Materials and methods Two units of blood were collected from each of 12 adult male Merino sheep and processed into 24 ovine-packed red blood cell (PRBC) units. Baseline haematological parameters of ovine blood and PRBC cells were analysed. Biochemical changes in ovine PRBCs were characterized during the 42-day storage period. Immunological compatibility of the blood was confirmed with sera from potential recipient sheep, using a saline and albumin agglutination cross-match. Following confirmation of compatibility, each recipient sheep (n = 12) was transfused with two units of ovine PRBC. Results Procedures for collecting, processing, cross-matching and transfusing ovine blood were established. Although ovine red blood cells are smaller and higher in number, their mean cell haemoglobin concentration is similar to human red blood cells. Ovine PRBC showed improved storage properties in saline–adenine–glucose–mannitol (SAG-M) compared with previous human PRBC studies. Seventy-six compatibility tests were performed and 17·1% were incompatible. Only cross-match compatible ovine PRBC were transfused and no adverse reactions were observed. Conclusion These findings demonstrate the utility of the ovine model for future blood transfusion studies and highlight the importance of compatibility testing in animal models involving homologous transfusions.

Ex Situ X-ray Diffraction, X-ray Absorption Near Edge Structure, Electron Spin Resonance, and Transmission Electron Microscopy Study of the Hydrothermal Crystallization of Vanadium Oxide Nanotubes: An Insight into the Mechanism of Formation

The nucleation and growth of vanadium oxide nanotubes (VOx-NT) have been followed by a combination of numerous ex situ techniques. long the hydrothermal process. Intermediate solid phases extracted at different reaction times have been characterized by powder X-ray diffraction, scanning and transmission electron microscopy, electron spin resonance, and V-K edge :X-ray absorption near-edge structure spectroscopy. The supernatant vanadate solutions extracted during the hydrothermal treatment have been studied by liquid V-51 NMR and flame. spectroscopy. For short durations of the hydrothermal synthesis, the initial V2O5-surfactant intercalate. is progressively transformed into VOx-NT whose crystallization starts to be detected after a hydrothermal treatment of 24 h. Upon heating from 24 h to 7 days, VOx-NT are obtained in larger amount and with an improved crystallinity. The detection of soluble amines and cyclic metavanadate V4O12](4-) in the supernatant solution along the hydrothermal process suggests that VOx-NT result from a dissolution precipitation mechanism. Metavanadate species V4O12](4-) could behave as molecular precursors in the polymerization reactions leading to VOx-NT.

Study of thin-film SO2 gas sensors by photometric and ellipsometric methods

Pt-, Pd-, and Zr-doped SnO2 thin films and dopant-free VOx films were fabricated by planar magnetron sputtering. Tests for sensitivity to SO2 for all samples were conducted at 180 degreesC, and the sensitivities were investigated ex situ with photometric and ellipsometric methods at room temperature. It was found that the optical sensitivities as well as the sensitive wavelength region for SnO2 films could be tuned by doping. The Pd-doped SnO2 films had good sensitivity in the visible range, and the Zr-doped in the near IR. The dominant sensitive wavelength region for VOx films fell into the visible range, and the ratio of the sensitivity in the visible to that in the near IR increased with O-2/Ar in the depositing atmosphere. (C) 2001 society of Photo-Optical instrumentation Engineers .

Research on operating conditions at the catalytic reactor for the combined removal of NOx and PCDD/PCDFs from MWI plants

The management of municipal solid waste (MSW), particularly the role of incineration, is currently a subject of public debate. Incineration shows to be a good alternative of reducing the volume of waste and eliminating certain infectious components. Moreover, Municipal Waste Incinerators (MWI), are reported to be highly hygienic and apart from that MWIs are immediately effective in terms of transport (incinerators can be built close to the waste sources) and incineration's nature. Nevertheless, the emissions of many hazardous substances make the Municipal Waste Incineration (MWI) plants to be unpopular. Metals (especially lead, manganese, cadmium, chromium and mercury) are concentrated in fly and bottom ashes. Furthermore, incomplete combustion produces a wide variety of potentially hazardous organic compounds, such as aldehydes, polycyclic aromatic hydrocarbons (PAH), chlorinated hydrocarbons including polychlorinated dibenzodioxins (PCDD) and dibenzofurans (PCDF), and even acid gases, including NOx. Many of these hazardous substances are carcinogenic and some have direct systemic toxicity.

Fabrication and Infrared Optical Properties of Nano Vanadium Dioxide Thin Films

Vanadium dioxide thin films were fabricated by ion beam sputtering on Si3N4/SiO2/Si after a post reductive annealing process in a nitrogen atmosphere. X-ray Diffraction (XRD), scanning electron microscope (SEM), and X-ray photoelectron spectroscopy (XPS) were employed to analyze the effects of post annealing temperature on crystallinity, morphology, and composition of the vanadium oxide thin films. Transmission properties of vanadium dioxide thin films were measured by Fourier transform-infrared (FT-IR) spectroscopy. The results showed that the as-deposited vanadium oxide thin films were composed of non-crystalline V2O5 and a tetragonal rutile VO2. After annealing at 400 degrees C for 2 h, the mixed phase vanadium oxide (VOx) thin film changed its composition and structure to VO2 and had a (011) oriented monoclinic rutile structure. When increasing the temperature to 450 degrees C, nano VO2 thin films with smaller grains were obtained. FT-IR results showed that the transmission contrast factor of the nano VO2 thin film was more than 0.99 and the transmission of smaller grain nano VO2 thin film was near zero at its switched state. Nano VO2 thin film with smaller grains is an ideal material for application in optical switching devices.

Low Temperature Deposited Nano-structured Vanadium Oxide Thin Films for Uncooled Infrared Detectors

A novel process of room temperature ion beam sputtering deposition of vanadium oxide films and low temperature post annealing for uncooled infrared detectors was proposed in this work. VOx thin films with relatively low square resistance (70 K Omega / square) and large temperature coefficient of resistance (more than 3%/K) at room temperature were fabricated using this low temperature process which was very compatible with the process of uncooled infrared detectors based on micromachined technology. Furthermore, chemical composition and film surface have been characterized using X-ray photoelectron spectroscopy (XPS) and scanning electron microscopy (SEM) respectively. The results showed that the main composition of the processed thin films was V2O5 and the thin films were in the process of crystallization.

Nano-urchin: The formation and structure of high-density spherical clusters of vanadium oxide nanotubes

We report the observation of urchin-like nanostructures consisting of high-density spherical nanotube radial arrays of vanadium oxide nanocomposite, successfully synthesized by a simple chemical route using an ethanolic solution of vanadium tri-isopropoxide and alkyl amine hexadecylamine for 7 days at 180oC. The results show that the growth process of the NanoUrchin occurs in stages, starting with a radial self-organized arrangement of lamina followed by the rolling of the lamina into nanotubes. The longest nanotubes are measured to be several micrometers in length with diameters of ~120 nm and hollow centers typically measured to be ~75 nm. The NanoUrchin have an estimated density of nanotubes of ~40 sr-1. The tube walls comprise layers of vanadium oxide with the organic surfactant intercalated between atomic layers. The interlayer distance is measured to be 2.9 ± 0.1 nm and electron diffraction identified the vanadate phase in the VOx nanocomposite as orthorhombic V2O5. These nanostructures may be used as three-dimensional composite materials and as supports for other materials.

Entre la "flânerie" y el ostracismo: la resignificación subjetiva de la ciudad en Fabián Casas y Martín Gambarotta

Desde los estudios pioneros de Walter Benjamín dedicados a la imagen del flâneur en la poesía de Baudelaire, la experiencia del sujeto poético y su íntima reconstrucción afectiva de la ciudad constituyen un índice significativo para aproximarnos a la experiencia de la vida moderna. En este artículo, nos interesa revisar cuáles son las particularidades que distinguen esta experiencia en un corpus de poesía argentina reciente -los libros Punctum y Refrito, de Martín Gambarotta, y Horla City y otros, de Fabián Casas-, que durante las décadas de 1990 y 2000 tematiza, con insistencia y mediante opciones diversas, la relación sujeto-ciudad. En dichos textos, es posible releer una continuidad -relativamente canónicadel paseante por los márgenes periféricos de la modernidad -en el caso de Casas- y la reclusión voluntaria, como repliegue extremo ante la vivencia del deambular callejero, que se percibe como intimidante en Gambarotta.

Divulgar ciência para diferentes públicos. Uma experiência no projeto STOL - Science Through Our Lives

O estágio que aqui se relata enquadra-se no âmbito do mestrado em Comunicação de Ciência, da Faculdade de Ciências Sociais Humanas (FCSH) da Universidade Nova de Lisboa (UNL) e do Instituto de Tecnologia Química e Biológica (ITQB). Foi realizado no projeto STOL – Science Through Our Lives, do Centro de Biologia Molecular e Ambiental (CBMA) da Escola de Ciências da Universidade do Minho (ECUM), e teve a duração de três meses. Esta componente prática do mestrado permitiu desenvolver um trabalho in loco, com o objetivo de servir, sobretudo, a comunicação de ciência informal. As principais atividades desenvolvidas foram exposições (Homo numericus; “Ponto a Ponto Enche a Ciência o Espaço), produção de materiais educativos (Objetos Educativos para a Casa das Ciências), campanhas de sensibilização (Comemoração do Dia Mundial da Água), auscultação do público (Vox Pop), crónicas de jornal (coluna “Aqui há Ciência”) e estabelecimento de parcerias estratégicas entre o STOL e outras forças vivas da região (AVianense e “Diário do Minho”). Ao integrar as atividades a decorrer no projeto STOL, foi possível contribuir com sugestões e novos materiais, e implementar projetos cujo principal objetivo foi o contacto direto com o público. De todo o trabalho se obteve um feedback positivo, conforme se documenta neste relatório e respetivos anexos. Se alguns constrangimentos podem ser enunciados (falta de recursos económicos e humanos, fraca tradição de envolvimento da população com a ciência e vice-versa, e a considerável falta de apoio institucional a atividades de divulgação de ciência), também devem ser evidenciados aspetos muito positivos como a dinâmica do grupo STOL, a capacidade de envolver diferentes públicos nas suas atividades, diferenciar estratégias para esses grupos, e finalmente, avaliar, sempre que possível, o seu desempenho, incluindo os resultados nas atividades seguintes. Neste contexto foram aplicados os conhecimentos adquiridos durante o primeiro ano curricular do mestrado, permitindo o ganho de experiência na área de trabalho onde a autora se sente realizada e pretende permanecer.