Hot turning of a difficult-to-machine steel (sae xev-f) aided by infrared radiation

A possible way for increasing the cutting tool life can be achieved by heating the workpiece in order to diminish the shear stress of material and thus decrease the machining forces. In this study, quartz electrical resistances were set around the workpiece for heating it during the turning. In the tests, heat-resistant austenitic alloy steel was used, hardenable by precipitation, mainly used in combustion engine exhaustion valves, among other special applications for industry. The results showed that in the hot machining the cutting tool life can be increased by 340% for the highest cutting speed tested and had a reduction of 205% on workpiece surface roughness, accompanied by a force decrease in relation to conventional turning. In addition, the chips formed in hot turning exhibited a stronger tendency to continuous chip formation indicating less energy spent in material removal process. Microhardness tests performed in the workpieces subsurface layers at 5 m depth revealed slightly higher values in the hot machining than in conventional, showing a tendency toward the formation of compressive residual stress into plastically deformed layer. The hot turning also showed better performance than machining using cutting fluid. Since it is possible to avoid the use of cutting fluid, this machining method can be considered better for the environment and for the human health.

Safety illusion and error trap in a collectively-operated machine accident

Workplace accidents involving machines are relevant for their magnitude and their impacts on worker health. Despite consolidated critical statements, explanation centered on errors of operators remains predominant with industry professionals, hampering preventive measures and the improvement of production-system reliability. Several initiatives were adopted by enforcement agencies in partnership with universities to stimulate production and diffusion of analysis methodologies with a systemic approach. Starting from one accident case that occurred with a worker who operated a brake-clutch type mechanical press, the article explores cognitive aspects and the existence of traps in the operation of this machine. It deals with a large-sized press that, despite being endowed with a light curtain in areas of access to the pressing zone, did not meet legal requirements. The safety devices gave rise to an illusion of safety, permitting activation of the machine when a worker was still found within the operational zone. Preventive interventions must stimulate the tailoring of systems to the characteristics of workers, minimizing the creation of traps and encouraging safety policies and practices that replace judgments of behaviors that participate in accidents by analyses of reasons that lead workers to act in that manner.

The cutting stock problem in the wood industry

This thesis proposes a solution for board cutting in the wood industry with the aim of usage minimization and machine productivity. The problem is dealt with as a Two-Dimensional Cutting Stock Problem and specific Combinatorial Optimization methods are used to solve it considering the features of the real problem.

Willy Loman and the "Soul of a New Machine": Technology and the Common Man

As Death of a Salesman opens, Willy Loman returns home “tired to the death” (p. 13). Lost in reveries about the beautiful countryside and the past, he's been driving off the road; and now he wants a cheese sandwich. But Linda's suggestion that he try a new American-type cheese — “It's whipped” (p. 16) — irritates Willy: “Why do you get American when I like Swiss?” (p. 17). His anger at being contradicted unleashes an indictment of modern industrialized America: The street is lined with cars. There's not a breath of fresh air in the neighborhood. The grass don't grow any more, you can't raise a carrot in the back yard. (p. 17). In the old days, “This time of year it was lilac and wisteria.” Now: “Smell the stink from that apartment house! And another one on the other side…” (pp. 17–18). But just as Willy defines the conflict between nature and industry, he pauses and simply wonders: “How can they whip cheese?” (p. 18). The clash between the old agrarian ideal and capitalistic enterprise is well documented in the literature on Death of a Salesman, as is the spiritual shift from Thomas Jefferson to Andrew Carnegie to Dale Carnegie that the play reflects. The son of a pioneer inventor and the slave to broken machines, Willy Loman seems to epitomize the victim of modern technology.

New generation of human machine interfaces for controlling UAV through depth based gesture recognition

New forms of natural interactions between human operators and UAVs (Unmanned Aerial Vehicle) are demanded by the military industry to achieve a better balance of the UAV control and the burden of the human operator. In this work, a human machine interface (HMI) based on a novel gesture recognition system using depth imagery is proposed for the control of UAVs. Hand gesture recognition based on depth imagery is a promising approach for HMIs because it is more intuitive, natural, and non-intrusive than other alternatives using complex controllers. The proposed system is based on a Support Vector Machine (SVM) classifier that uses spatio-temporal depth descriptors as input features. The designed descriptor is based on a variation of the Local Binary Pattern (LBP) technique to efficiently work with depth video sequences. Other major consideration is the especial hand sign language used for the UAV control. A tradeoff between the use of natural hand signs and the minimization of the inter-sign interference has been established. Promising results have been achieved in a depth based database of hand gestures especially developed for the validation of the proposed system.

3LD: towards high quality, industry-ready linguistic Linked Licensed Data

The application of Linked Data technology to the publication of linguistic data promises to facilitate interoperability of these data and has lead to the emergence of the so called Linguistic Linked Data Cloud (LLD) in which linguistic data is published following the Linked Data principles. Three essential issues need to be addressed for such data to be easily exploitable by language technologies: i) appropriate machine-readable licensing information is needed for each dataset, ii) minimum quality standards for Linguistic Linked Data need to be defined, and iii) appropriate vocabularies for publishing Linguistic Linked Data resources are needed. We propose the notion of Licensed Linguistic Linked Data (3LD) in which different licensing models might co-exist, from totally open to more restrictive licenses through to completely closed datasets.

Machine Translation: Translators' Friend or Foe?

This paper discusses the impact of machine translation on the language industry, specifically addressing its effect on translators. It summarizes the history of the development of machine translation, explains the underlying theory that ties machine translation to its practical applications, and describes the different types of machine translation as well as other tools familiar to translators. There are arguments for and against its use, as well as evaluation methods for testing it. Internet and real-time communication are featured for their role in the increase of machine translation use. The potential that this technology has in the future of professional translation is examined. This paper shows that machine translation will continue to be increasingly used whether translators like it or not.

The aid of machine learning to overcome the classification of real health discharge reports written in Spanish

Hospitals attached to the Spanish Ministry of Health are currently using the International Classification of Diseases 9 Clinical Modification (ICD9-CM) to classify health discharge records. Nowadays, this work is manually done by experts. This paper tackles the automatic classification of real Discharge Records in Spanish following the ICD9-CM standard. The challenge is that the Discharge Records are written in spontaneous language. We explore several machine learning techniques to deal with the classification problem. Random Forest resulted in the most competitive one, achieving an F-measure of 0.876.

The machinist dictionary; the authoritative handbook of terms, definitions, and accepted standards of the machinist craft and industry.

Mode of access: Internet.

Plant and product of the Mesta machine company, Pittsburgh, Pennsylvania, U.S.A. ...

"The Mesta machine company ... for a number of years have been designers and builders of machinery used in the iron and steel industry."--Introd.

Machine manual of instructions for judges of election : the general election--November 4, 1980.

Cover title.

The employment effects of high-technology : a case study of machine vision /

"May 1986."

Science and Industry.

Title Varies: V.1, Home Study; V.2-3, Home Study Magazine; V.4,No.10-V.8,No.4, Science and Industry

Men of invention and industry /

Phineas Pett, beginnings of English shipbuilding.--Francis Pettit Smith, practical introducer of the screw propeller.--John Harrison, inventor of the marine chronometer.--John Lombe, introducer of the silk industry into England.--William Murdock, his life and inventions.--Frederick Koenig, inventor of the steam-printing machine.--The Walters of the 'Times', invention of the Walter press.--William Clowes, book-printing by steam.--Charles Bianconi, a lesson of self-help in Ireland.--Industry in Ireland, through Connaught and Ulster to Belfast.--Harland, E. J. Ship-building in Belfast.--Astronomers and students in humble life, a new chapter in the 'Pursuit of knowledge under difficulties'.

Using machine vision classification to control access of animals to water

Invasive vertebrate pests together with overabundant native species cause significant economic and environmental damage in the Australian rangelands. Access to artificial watering points, created for the pastoral industry, has been a major factor in the spread and survival of these pests. Existing methods of controlling watering points are mechanical and cannot discriminate between target species. This paper describes an intelligent system of controlling watering points based on machine vision technology. Initial test results clearly demonstrate proof of concept for machine vision in this application. These initial experiments were carried out as part of a 3-year project using machine vision software to manage all large vertebrates in the Australian rangelands. Concurrent work is testing the use of automated gates and innovative laneway and enclosure design. The system will have application in any habitat throughout the world where a resource is limited and can be enclosed for the management of livestock or wildlife.