Synergy Sources, Target Autonomy and Integration in Acquisitions

Determining the appropriate level of integration is crucial to realizing value from acquisitions. Most prior research assumes that higher integration implies the removal of autonomy from target managers, which in turn undermines the functioning of the target firm if it entails unfamiliar elements for the acquirer. Using a survey of 86 acquisitions to obtain the richness of detail necessary to distinguish integration from autonomy, the authors argue and find that integration and autonomy are not the opposite ends of a single continuum. Certain conditions (e.g., when complementarity rather than similarity is the primary source of synergy) lead to high levels of both integration and autonomy. In addition, similarity negatively moderates the relationship between complementarity and autonomy when the target offers both synergy sources. In contrast, similarity does not moderate the link between complementarity and integration. The authors' findings advance scholarly understanding about the drivers of implementation strategy and in particular the different implementation strategies acquiring managers deploy when they attempt to leverage complementarities, similarities, or both.

Supplier relationship management capability in the firm's global integration

Organizing is a general problem for global firms. Firms are seeking a balance between responsiveness at the local level and efficiency through worldwide integration. In this, supply management is the focal point where external commercial supply market relations are connected with the firm's internal functions. Here, effective supplier relationship management (SRM) is essential. Global supply integration processes create new challenges for supply management professionals and new capabilities are required. Previous research has developed several models and tools for managers to manage and categorize different supplier relationship types, but the role of the firm's internal capability of managing supplier relationships in their global integration has been a clearly neglected issue. Hence, the main objective of this dissertation is to clarify how the capability of SRM may influence the firm's global competitiveness. This objective is divided into four research questions aiming to identify the elements of SRM capability, the internal factors of integration, the effect of SRM capability on strategy and how SRM capability is linked with global integration. The dissertation has two parts. The first part presents the theoretical approaches and practical implications from previous research and draws a synthesis on them. The second part comprises four empirical research papers addressing the research questions. Both qualitative and quantitative methods are utilized in this dissertation. The main contribution of this dissertation is that it aggregates the theoretical and conceptual perspectives applied to SRM research. Furthermore, given the lack of valid scales to measure capability, this study aimed to provide a foundation for an SRM capability scale by showing that the construct of SRM capability is formed of five separate elements. Moreover, SRM capability was found to be the enabler in efforts toward value chain integration. Finally, it was found that the effect of capability on global competitiveness is twofold: it reduces conflicts between responsiveness and integration, and it creates efficiency. Thus, by identifying and developing the firm's capabilities it is possible to improve performance, and hence, global competitiveness.

Integration in project business : mechanisms for integrating customers and the project network during the life-cycle of industrial projects

This thesis focuses on integration in project business, i.e. how projectbased companies organize their product and process structures when they deliver industrial solutions to their customers. The customers that invest in these solutions run their businesses in different geographical, political and economical environments, which should be acknowledged by the supplier when providing solutions comprising of larger and more complex scopes than previously supplied to these customers. This means that the suppliers are increasing their supply range by taking over some of the activities in the value chain that have traditionally been handled by the customer. In order to be able to provide the functioning solutions, including more engineering hours, technical equipment and a wider project network, a change is needed in the mindset in order to be able to carry out and take the required responsibility that these new approaches bring. For the supplier it is important to be able to integrate technical products, systems and services, but the supplier also needs to have the capabilities to integrate the cross-functional organizations and departments in the project network, the knowledge and information between and within these organizations and departments, along with inputs from the customer into the product and process structures during the lifecycle of the project under development. Hence, the main objective of this thesis is to explore the challenges of integration that industrial projects meet, and based on that, to suggest a concept of how to manage integration in project business by making use of integration mechanisms. Integration is considered the essential process for accomplishing an industrial project, whereas the accomplishment of the industrial project is considered to be the result of the integration. The thesis consists of an extended summary and four papers, that are based on three studies in which integration mechanisms for value creation in industrial project networks and the management of integration in project business have been explored. The research is based on an inductive approach where in particular the design, commissioning and operations functions of industrial projects have been studied, addressing entire project life-cycles. The studies have been conducted in the shipbuilding and power generation industries where the scopes of supply consist of stand-alone equipment, equipment and engineering, and turnkey solutions. These industrial solutions include demanding efforts in engineering and organization. Addressing the calls for more studies on the evolving value chains of integrated solutions, mechanisms for inter- and intra-organizational integration and subsequent value creation in project networks have been explored. The research results in thirteen integration mechanisms and a typology for integration is proposed. Managing integration consists of integrating the project network (the supplier and the sub-suppliers) and the customer (the customer’s business purpose, operations environment and the end-user) into the project by making use of integration mechanisms. The findings bring new insight into research on industrial project business by proposing integration of technology and engineering related elements with elements related to customer oriented business performance in contemporary project environments. Thirteen mechanisms for combining products and the processes needed to deliver projects are described and categorized according to the impact that they have on the management of knowledge and information. These mechanisms directly relate to the performance of the supplier, and consequently to the functioning of the solution that the project provides. This thesis offers ways to promote integration of knowledge and information during the lifecycle of industrial projects, enhancing the development towards innovative solutions in project business.

Searching for keys to successful post-merger integration : a longitudinal case-study following a public sector merger

Unsuccessful mergers are unfortunately the rule rather than the exception. Therefore it is necessary to gain an enhanced understanding of mergers and post-merger integrations (PMI) as well as learning more about how mergers and PMIs of information systems (IS) and people can be facilitated. Studies on PMI of IS are scarce and public sector mergers are even less studied. There is nothing however to indicate that public sector mergers are any more successful than those in the private sector. This thesis covers five studies carried out between 2008 and 2011 in two organizations in higher education that merged in January 2010. The most recent study was carried out two years after the new university was established. The longitudinal case-study focused on the administrators and their opinions of the IS, the work situation and the merger in general. These issues were investigated before, during and after the merger. Both surveys and interviews were used to collect data, to which were added documents that both describe and guide the merger process; in this way we aimed at a triangulation of findings. Administrators were chosen as the focus of the study since public organizations are highly dependent on this staff category, forming the backbone of the organization and whose performance is a key success factor for the organization. Reliable and effective IS are also critical for maintaining a functional and effective organization, and this makes administrators highly dependent on their organizations’ IS for the ability to carry out their duties as intended. The case-study has confirmed the administrators’ dependency on IS that work well. A merger is likely to lead to changes in the IS and the routines associated with the administrators’ work. Hence it was especially interesting to study how the administrators viewed the merger and its consequences for IS and the work situation. The overall research objective is to find key issues for successful mergers and PMIs. The first explorative study in 2008 showed that the administrators were confident of their skills and knowledge of IS and had no fear of having to learn new IS due to the merger. Most administrators had an academic background and were not anxious about whether IS training would be given or not. Before the merger the administrators were positive and enthusiastic towards the merger and also to the changes that they expected. The studies carried out before the merger showed that these administrators were very satisfied with the information provided about the merger. This information was disseminated through various channels and even negative information and postponed decisions were quickly distributed. The study conflicts with the theories that have found that resistance to change is inevitable in a merger. Shortly after the merger the (third) study showed disappointment with the fact that fewer changes than expected had been implemented even if the changes that actually were carried out sometimes led to a more problematic work situation. This was seen to be more prominent for routine changes than IS changes. Still the administrators showed a clear willingness to change and to share their knowledge with new colleagues. This knowledge sharing (also tacit) worked well in the merger and the PMI. The majority reported that the most common way to learn to use new ISs and to apply new routines was by asking help from colleagues. They also needed to take responsibility for their own training and development. Five months after the merger (the fourth study) the administrators had become worried about the changes in communication strategy that had been implemented in the new university. This was perceived as being more anonymous. Furthermore, it was harder to get to know what was happening and to contact the new decision makers. The administrators found that decisions, and the authority to make decisions, had been moved to a higher administrative level than they were accustomed to. A directive management style is recommended in mergers in order to achieve a quick transition without distracting from the core business. A merger process may be tiresome and require considerable effort from the participants. In addition, not everyone can make their voice heard during a merger and consensus is not possible in every question. It is important to find out what is best for the new organization instead of simply claiming that the tried and tested methods of doing things should be implemented. A major problem turned out to be the lack of management continuity during the merger process. Especially problematic was the situation in the IS-department with many substitute managers during the whole merger process (even after the merger was carried out). This meant that no one was in charge of IS-issues and the PMI of IS. Moreover, the top managers were appointed very late in the process; in some cases after the merger was carried out. This led to missed opportunities for building trust and management credibility was heavily affected. The administrators felt neglected and that their competences and knowledge no longer counted. This, together with a reduced and altered information flow, led to rumours and distrust. Before the merger the administrators were convinced that their achievements contributed value to their organizations and that they worked effectively. After the merger they were less sure of their value contribution and effectiveness even if these factors were not totally discounted. The fifth study in November 2011 found that the administrators were still satisfied with their IS as they had been throughout the whole study. Furthermore, they believed that the IS department had done a good job despite challenging circumstances. Both the former organizations lacked IS strategies, which badly affected the IS strategizing during the merger and the PMI. IS strategies deal with issues like system ownership; namely who should pay and who is responsible for maintenance and system development, for organizing system training for new IS, and for effectively run IS even during changing circumstances (e.g. more users). A proactive approach is recommended for IS strategizing to work. This is particularly true during a merger and PMI for handling issues about what ISs should be adopted and implemented in the new organization, issues of integration and reengineering of IS-related processes. In the new university an ITstrategy had still not been decided 26 months after the new university was established. The study shows the importance of the decisive management of IS in a merger requiring that IS issues are addressed in the merger process and that IS decisions are made early. Moreover, the new management needs to be appointed early in order to work actively with the IS-strategizing. It is also necessary to build trust and to plan and make decisions about integration of IS and people.

Integration of existing military capability models into the Comprehensive Capability Meta-model

Abstract—This paper discusses existing military capability models and proposes a comprehensive capability meta-model (CCMM) which unites the existing capability models into an integrated and hierarchical whole. The Zachman Framework for Enterprise Architecture is used as a structure for the CCMM. The CCMM takes into account the abstraction level, the primary area of application, stakeholders, intrinsic process, and life cycle considerations of each existing capability model, and shows how the models relate to each other. The validity of the CCMM was verified through a survey of subject matter experts. The results suggest that the CCMM is of practical value to various capability stakeholders in many ways, such as helping to improve communication between the different capability communities.

Exploring the value creation in service ecosystem context: the case of the information technology sector

This thesis examines customer value creation in a service ecosystem context. The objective of this thesis is to develop a comprehensive view of value creation processes in a service ecosystem context and an understanding on the roles of the stakeholders involved in these processes, focusing on the information technology industry. The novelty of the two central concepts of this thesis, systemic customer value and service ecosystem, as well as the gap in the literature of empirical research on value creation in an ecosystem-level, opened an interesting research topic. The empirical study is conducted as a single case analysis, utilizing Group Decision Support System (GDSS) and also Analytic Hierarchy Process (AHP). The findings suggest that customer value is created by a complex combination of interactions among different actors of the ecosystem. Thus, value is not created by a single offering directed to the customer, but by an integration of services from different parts of the ecosystem as well as the active participation of customer in this process.

Susteinable steelmaking by process integration

Environmental issues, including global warming, have been serious challenges realized worldwide, and they have become particularly important for the iron and steel manufacturers during the last decades. Many sites has been shut down in developed countries due to environmental regulation and pollution prevention while a large number of production plants have been established in developing countries which has changed the economy of this business. Sustainable development is a concept, which today affects economic growth, environmental protection, and social progress in setting up the basis for future ecosystem. A sustainable headway may attempt to preserve natural resources, recycle and reuse materials, prevent pollution, enhance yield and increase profitability. To achieve these objectives numerous alternatives should be examined in the sustainable process design. Conventional engineering work cannot address all of these substitutes effectively and efficiently to find an optimal route of processing. A systematic framework is needed as a tool to guide designers to make decisions based on overall concepts of the system, identifying the key bottlenecks and opportunities, which lead to an optimal design and operation of the systems. Since the 1980s, researchers have made big efforts to develop tools for what today is referred to as Process Integration. Advanced mathematics has been used in simulation models to evaluate various available alternatives considering physical, economic and environmental constraints. Improvements on feed material and operation, competitive energy market, environmental restrictions and the role of Nordic steelworks as energy supplier (electricity and district heat) make a great motivation behind integration among industries toward more sustainable operation, which could increase the overall energy efficiency and decrease environmental impacts. In this study, through different steps a model is developed for primary steelmaking, with the Finnish steel sector as a reference, to evaluate future operation concepts of a steelmaking site regarding sustainability. The research started by potential study on increasing energy efficiency and carbon dioxide reduction due to integration of steelworks with chemical plants for possible utilization of available off-gases in the system as chemical products. These off-gases from blast furnace, basic oxygen furnace and coke oven furnace are mainly contained of carbon monoxide, carbon dioxide, hydrogen, nitrogen and partially methane (in coke oven gas) and have proportionally low heating value but are currently used as fuel within these industries. Nonlinear optimization technique is used to assess integration with methanol plant under novel blast furnace technologies and (partially) substitution of coal with other reducing agents and fuels such as heavy oil, natural gas and biomass in the system. Technical aspect of integration and its effect on blast furnace operation regardless of capital expenditure of new operational units are studied to evaluate feasibility of the idea behind the research. Later on the concept of polygeneration system added and a superstructure generated with alternative routes for off-gases pretreatment and further utilization on a polygeneration system producing electricity, district heat and methanol. (Vacuum) pressure swing adsorption, membrane technology and chemical absorption for gas separation; partial oxidation, carbon dioxide and steam methane reforming for methane gasification; gas and liquid phase methanol synthesis are the main alternative process units considered in the superstructure. Due to high degree of integration in process synthesis, and optimization techniques, equation oriented modeling is chosen as an alternative and effective strategy to previous sequential modelling for process analysis to investigate suggested superstructure. A mixed integer nonlinear programming is developed to study behavior of the integrated system under different economic and environmental scenarios. Net present value and specific carbon dioxide emission is taken to compare economic and environmental aspects of integrated system respectively for different fuel systems, alternative blast furnace reductants, implementation of new blast furnace technologies, and carbon dioxide emission penalties. Sensitivity analysis, carbon distribution and the effect of external seasonal energy demand is investigated with different optimization techniques. This tool can provide useful information concerning techno-environmental and economic aspects for decision-making and estimate optimal operational condition of current and future primary steelmaking under alternative scenarios. The results of the work have demonstrated that it is possible in the future to develop steelmaking towards more sustainable operation.

Co-creating value with customers as a new approach of entering new market

Global trends associated with development of information technology, globalization, industrial and economic changes are influencing on company and customer domains and thus transforming company-customer relationship. The company centric paradigm with a strong product focus shifts to a customer oriented one with a strong emphasis on customer collaboration. As a result, the customer role changes from a passive observer to an active player. Moreover, global trends contribute to transformation of competitive environment making it tougher and simplifying an access to resources previously considered as unique. All that factors push the companies towards cooperation with customers in order to identify unarticulated needs and finding the best possible solution to existing customer problems. The Master’s Thesis is done for Outotec (Lappeenranta) which considers extension of dewatering business in Russian coal market. Research aims to identify key features of coal preparation and dewatering of fine coal and tailings in Russian preparation plants; analyze the state of Russian coal market and evaluate market potential for Outotec dewatering solutions. The study has a qualitative nature and implements an action research methodology that involves both creation of knowledge and introduction of changes into the system. The base for taking actions is formed by theoretical framework that targets on describing company - customer interaction and has selected co-creation as the most appropriate method of customer involvement. The integration of co-creation approach into an action research cycle allows not only fulfilling the research objectives but also facilitates organizational learning and intraorganizational collaboration, assists in establishing customer contacts and making the first steps into the market, bringing new joint projects to the company and opening real business opportunities.

Economics of Power-to-Gas integration to wastewater treatment plant

Solar and wind power produce electricity irregularly. This irregular power production is problematic and therefore production can exceed the need. Thus sufficient energy storage solutions are needed. Currently there are some storages, such as flywheel, but they are quite short-term. Power-to-Gas (P2G) offers a solution to store energy as a synthetic natural gas. It also improves nation’s energy self-sufficiency. Power-to-Gas can be integrated to an industrial or a municipal facility to reduce production costs. In this master’s thesis the integration of Power-to-Gas technologies to wastewater treatment as a part of the VTT’s Neo-Carbon Energy project is studied. Power-to-Gas produces synthetic methane (SNG) from water and carbon dioxide with electricity. This SNG can be considered as stored energy. Basic wastewater treatment technologies and the production of biogas in the treatment plant are studied. The utilisation of biogas and SNG in heat and power production and in transportation is also studied. The integration of the P2G to wastewater treatment plant (WWTP) is examined mainly from economic view. First the mass flows of flowing materials are calculated and after that the economic impact based on the mass flows. The economic efficiency is evaluated with Net Present Value method. In this thesis it is also studied the overall profitability of the integration and the key economic factors.

Post-transaction brand and model line-up integration in the automotive industry: Case studies of European companies as target of acquisitions by Chinese and Indian multinational corporations

Corporations practice company acquisitions in order to create shareholder’s value. During the last few decades, the companies in emerging markets have become active in the acquisition business. During the last decade, large and significant acquisitions have occurred especially in automotive industry. While domestic markets have become too competitive and companies are lacking required capabilities, they seek possibilities to expand into Western markets by attaining valuable assets through acquisitions of developed country corporations. This study discusses the issues and characteristics of these acquisitions through case studies. The purpose of this study was to identify the acquisition motives and strategies for post-transaction brand and product integration as well as analyze the effect of the motives to the integration strategy. The cases chosen for the research were Chinese Geely acquiring Swedish Volvo in 2010 and Indian Tata Motors buying British Jaguar Land Rover in 2008. The main topics were chosen according to their significance for companies in automotive industry as well as those are most visible parts for consumers. The study is based on qualitative case study methods, analyzing secondary data from academic papers and news articles as well as companies’ own announcements e.g. stock exchange and press releases. The study finds that the companies in the cases mainly possessed asset-seeking and market-seeking motives. In addition, the findings refer to rather minimal post-acquisition brand and product integration strategies. Mainly the parent companies left the target company autonomous to make their own business strategies and decisions. The most noticeable integrations were in the product development and production processes. Through restructuring the product architectures, the companies were able to share components and technology between product families and brands, which results in cutting down costs and in increase of profitability and efficiency. In the Geely- Volvo case, the strategy focused more on component sharing and product development know-how, whereas in Tata Motors-Jaguar Land Rover case, the main actions were to cut down costs through component sharing and combine production and distribution networks especially in Asian markets. However, it was evident that in both cases the integration and technology sharing were executed cautiously to prevent on harming the valuable image of the luxury brand. This study has concluded that the asset-seeking motives have significant influence on the posttransaction brand and model line-up integration strategies. By taking a cautious approach in acquiring assets, such as luxury brand, the companies in the cases have implemented a successful post-acquisition strategy and managed to create value for the shareholders at least in short-term. Yritykset harjoittavat yritysostoja luodakseen osakkeenomistajille lisäarvoa. Viimeisten muutamien vuosikymmenien aikana yritykset kehittyvissä maissa ovat myös aktivoituneet yritysostoissa. Viimeisen vuosikymmenen aikana erityisesti autoteollisuudessa on esiintynyt suuria ja merkittäviä yritysostoja. Koska kilpailu kotimaan markkinoilla on kiristynyt ja yritykset ovat vailla vaadittavia valmiuksia, ne etsivät mahdollisuuksiaan laajentaa länsimaisiin markkinoihin hankkimalla arvokkaita etuja kehittyneiden maiden yrityksistä yritysostojen avulla. Tämä tutkimus pohtii näiden yritysostojen olennaisia kysymyksiä ja ominaisuuksia casetutkimuksien kautta. Tutkimuksen tarkoitus oli tunnistaa sekä yritysostojen motiiveja ja brändi- ja mallisto-integraation strategioita että analysoida kyseisten motiivien vaikutusta integraatiostrategiaan. Tapaus-tutkimuksiksi valittiin kiinalaisen Geelyn yritysosto ruotsalaisesta Volvosta vuonna 2010 ja intialaisen Tata Motorsin yritysosto englantilaisesta Jaguar Land Roverista vuonna 2008. Tutkimus on kvalitatiivinen case-tutkimus ja siinä analysoidaan toissijaista tietoa sekä akateemisten ja uutisartikkeleiden että yritysten omien ilmoitusten, kuten pörssi- ja lehdistötiedotteiden, kautta. Tutkimuksen tulokset osoittavat, että tutkittujen yritysten toiminnat perustuivat motiiveihin, joita ajoivat etujen and uusien markkinoiden tarve. Sen lisäksi tutkimustulokset osoittivat, että yritysoston jälkeinen brändi- ja mallisto-integraatio pidettiin minimaalisena. Pääasiallisesti kohdeyrityksille jätettiin autonomia tehdä omat liikkeenjohdolliset päätökset yritysstrategioihin liittyen. Huomattavimmat integraatiot koskivat tuotekehityksellisiä ja tuotannollisia prosesseja. Kehittämällä uudelleen tuotearkkitehtuureja, yritykset pystyivät jakamaan komponentteja ja teknologiaa tuoteperheiden ja brändien välillä. Tämä mahdollisti kustannusleikkauksia sekä kannattavuuden ja tehokkuuden parantamista. Geely-Volvo –tapauksessa integraatiostrategia keskittyi komponenttien jakamiseen yhteisten tuotearkkitehtuurien avulla ja tuotekehityksen ammattitaitoon, kun taas Tata Motors-JLR –tapauksessa päätoiminnat olivat kustannuksien leikkaus sekä tuotannon ja jakeluverkoston yhdistäminen erityisesti Aasian maissa. Yhteistä yrityskaupoissa oli, että brändi- ja mallisto-integraatio sekä teknologian jakaminen suoritettiin varoen ehkäistäkseen arvokkaiden luksus-brändien tuotekuvan vahingoittamista. Tutkimuksen lopputulokset osoittavat, että yrityskaupan motiiveilla on huomattava vaikutus brändija mallisto-integraation strategiaan. Toteuttamalla varovaista lähestymistapaa luksus-brändin hankinnassa ja integraatiossa, yritykset ovat onnistuneet luomaan lisäarvoa osakkeenomistajille vähintään lyhyellä aikavälillä.

Systematic mapping study on integration of B2B customers in ERP

Business-to-business terminology is relatively new as a business concept, so is the enterprise resource planning system in information technology. Research, implementation and integration of these two concept has been observed for last two decades in this paper. One of the major success point for growth in business-to-business environment is the availability of internal and partner data. Enterprise resource planning system facilitates storing, analysis of such data and enables different business process automation, forecasting and numerous value creating activity. In order to achieve such functionality for B2B customers, integrating them within ERP is very useful. This paper aims at understanding and suggesting such integration through investigating related documentation of similar integration scenarios, infrastructure, models and architectures. The investigation of the topic of this paper has been made using systematic mapping study of related papers and listing and suggesting necessary ingredients that enables such integration. Furthermore, this paper also suggests possibilities to overcome challenges integration experts might face during the integration phase and opens doors to future research scope in the related fields.

EU Strategy for the Baltic Sea Region: its added value in environmental social and economic dimensions

The European Council has invited the European Commission to present the first macro-regional strategy – the EU Strategy for the Baltic Sea Region (EUSBSR) on the 14th of December 2007, primarily to address collective challenges and opportunities of the Region and also to engender cohesion in support of an European integration policy. However, macro-regional strategies conceived to aid European integration and territorial cohesion were viewed by academics with skepticism, obscuring the strategies’ potential impact. This thesis intends to investigate and measure the added value of the EUSBSR in order to analyze its impact on regional development and its feasibility as a guide for future programs intending to strengthen European cohesion and integration. To determine the added value of the EUSBSR the thesis is organized into three sections, so as to address environmental, social, and economic concerns, respectively. The first case examines EU-Russia cooperation in an environmental context to investigate how environmental cooperation with an external neighbor could forge increased cohesion in a macro-regional setting. To figure the added cooperation that academic cooperation among universities would contribute to social dimension, the work has chosen several study results. Lastly, to measure out the added value for the economic strategy objective, the study employs the project for Improved Global Competitiveness in an example of ‘A Baltic Sea Region Program for Innovation, Cluster and SME-Networks’ as an economic plan.

Partnership for arts integration : exploring the experiences of teachers and artists working with integrated arts programs

This research acknowledges the difficulties experienced by teachers presenting integrated arts curricula. Instructional support is offered by arts organizations that provide arts partnerships with local schools boards. The study focuses on the experiences of 8 teachers from a Catholic school board in southern Ontario who participated in integrated arts programs offered by The Royal Conservatory of Music's Learning Through the Arts™ (LTTATM) program and a local art gallery's Art Based Integrated Learning (ABIL) program and examines their responses to the programs and their perception of personal and professional development through this association. Additionally, questions were posed to the . "aftisfs"from-tneSe]Jfograrrrs;-and"they liiscus·sed·how"participating in-collaboration with teachers in the development of in-school programs enabled them to experience personal and professional development as well. Seven themes emerged from the data. These themes included: teachers' feelings of a lack of preparedness to teach the arts; the value of the arts and arts partnerships in schools; the role of the artists in the education of teachers; professional development for both teachers and artists; the development of collegiality; perceptions of student engagement; and the benefits and obstacles of integrating the arts into the curriculum. This document highlights the benefits to both teachers and artists of arts partnerships between schools and outside arts organizations.

spotlight europe #2012/06 - September 2012: The value of Europe

Do the citizens of the EU actually know what it is worth to them personally? The surveys increasingly suggest that they reject it and regard it with contempt. After living for years in a state of emergency, many people have started to cast doubt on the whole notion of integration, and on the ability of the politicians involved to find meaningful solutions to the crisis.

Interdisciplinarity: perceptions of the value of computer-supported collaborative work in design for the built environment

This paper presents the findings from a study into the current exploitation of computer-supported collaborative working (CSCW) in design for the built environment in the UK. The research is based on responses to a web-based questionnaire. Members of various professions, including civil engineers, architects, building services engineers, and quantity surveyors, were invited to complete the questionnaire. The responses reveal important trends in the breadth and size of project teams at the same time as new pressures are emerging regarding team integration and efficiency. The findings suggest that while CSCW systems may improve project management (e.g., via project documentation) and the exchange of information between team members, it has yet to significantly support those activities that characterize integrated collaborative working between disparate specialists. The authors conclude by combining the findings with a wider discussion of the application of CSCW to design activity-appealing for CSCW to go beyond multidisciplinary working to achieve interdisciplinary working.