896 resultados para Urban vegetation management
Resumo:
Relatório de Estágio para obtenção do grau de Mestre em Engenharia Civil na Área de Especialização de Vias de Comunicação e Transportes
Resumo:
Dissertação para obtenção do Grau de Mestre em Engenharia Informática
Resumo:
Dissertação de mestrado integrado em Engenharia Civil
Resumo:
This manual summarizes the roadside tree and brush control methods used by all of Iowa's 99 counties. It is based on interviews conducted in Spring 2002 with county engineers, roadside managers and others. The target audience of this manual is the novice county engineer or roadside manager. Iowa law is nearly silent on roadside tree and brush control, so individual counties have been left to decide on the level of control they want to achieve and maintain. Different solutions have been developed but the goal of every county remains the same: to provide safe roads for the traveling public. Counties in eastern and southern Iowa appear to face the greatest brush control challenge. Most control efforts can be divided into two categories: mechanical and chemical. Mechanical control includes cutting tools and supporting equipment. A chain saw is the most widely used cutting tool. Tractor mounted boom mowers and brush cutters are used to prune miles of brush but have significant safety and aesthetic limitations and boom mowers are easily broken by inexperienced operators. The advent of tree shears and hydraulic thumbs offer unprecedented versatility. Bulldozers are often considered a method of last resort since they reduce large areas to bare ground. Any chipper that violently grabs brush should not be used. Chemical control is the application of herbicide to different parts of a plant: foliar spray is applied to leaves; basal bark spray is applied to the tree trunk; a cut stump treatment is applied to the cambium ring of a cut surface. There is reluctance by many to apply herbicide into the air due to drift concerns. One-third of Iowa counties do not use foliar spray. By contrast, several accepted control methods are directed toward the ground. Freshly cut stumps should be treated to prevent resprouting. Basal bark spray is highly effective in sensitive areas such as near houses. Interest in chemical control is slowly increasing as herbicides and application methods are refined. Fall burning, a third, distinctly separate technique is underused as a brush control method and can be effective if timed correctly. In all, control methods tend to reflect agricultural patterns in a county. The use of chain saws and foliar sprays tends to increase in counties where row crops predominate, and boom mowing tends to increase in counties where grassland predominates. For counties with light to moderate roadside brush, rotational maintenance is the key to effective control. The most comprehensive approach to control is to implement an integrated roadside vegetation management (IRVM) program. An IRVM program is usually directed by a Roadside Manager whose duties may be shared with another position. Funding for control programs comes from the Rural Services Basic portion of a county's budget. The average annual county brush control budget is about $76,000. That figure is thought not to include shared expenses such as fuel and buildings. Start up costs for an IRVM program are less if an existing control program is converted. In addition, IRVM budgets from three different northeastern Iowa counties are offered for comparison in this manual. The manual also includes a chapter on temporary traffic control in rural work zones, a summary of the Iowa Code as it relates to brush control, and rules on avoiding seasonal disturbance of the endangered Indiana bat. Appendices summarize survey and forest cover data, an equipment inventory, sample forms for record keeping, a sample brush control policy, a few legal opinions, a literature search, and a glossary.
Resumo:
El proceso de repoblación forestal es bastante complejo, ya que implica numerosos factores, cada uno de los cuales debe ser comprendido de forma individual, y conocidas sus relaciones con otros factores con los cuales interactúa. La forma de evaluar de manera integral el resultado de estos factores es mediante el control de calidad. La respuesta de la planta en una estación particular va a depender de la capacidad de respuesta a unas condiciones ambientales limitantes, y de la forma en como esas condiciones limitan su supervivencia y crecimiento, o bien pueden ser modificadas para mejorar su arraigo. Las actividades culturales propias de las repoblaciones (ej. proceimiento de preparación, control de la vegetación, cuidados culturales, etc.) van a influir de manera directa en el éxito de la misma. La adecuada ejecución y el control de las mismas van a permitir mejorar el éxito de las repoblaciones, pero también ayudan a identificar las causas de las perdidas producidas y, por tanto, corregir defectos que condicionan su éxito final.
Resumo:
The objective of this work was to evaluate the alterations in carbon and nitrogen mineralization due to different soil tillage systems and groundcover species for intercropped orange trees. The experiment was established in an Ultisol soil (Typic Paleudults) originated from Caiuá sandstone in northwestern of the state of Paraná, Brazil, in an area previously cultivated with pasture (Brachiaria humidicola). Two soil tillage systems were evaluated: conventional tillage (CT) in the entire area and strip tillage (ST) with a 2-m width, each with different groundcover vegetation management systems. The citrus cultivar utilized was the 'Pera' orange (Citrus sinensis) grafted onto a 'Rangpur' lime rootstock. The soil samples were collected at a 0-15-cm depth after five years of experiment development. Samples were collected from under the tree canopy and from the inter-row space after the following treatments: (1) CT and annual cover crop with the leguminous Calopogonium mucunoides; (2) CT and perennial cover crop with the leguminous peanut Arachis pintoi; (3) CT and evergreen cover crop with Bahiagrass Paspalum notatum; (4) CT and cover crop with spontaneous B. humidicola grass vegetation; and (5) ST and maintenance of the remaining grass (pasture) of B. humidicola. The soil tillage systems and different groundcover vegetation influenced the C and N mineralization, both under the tree canopy and in the inter-row space. The cultivation of B. humidicola under strip tillage provided higher potential mineralization than the other treatments in the inter-row space. Strip tillage increased the C and N mineralization compared to conventional tillage. The grass cultivation increased the C and N mineralization when compared to the others treatments cultivated in the inter-row space.
Resumo:
Among the numerous approaches to food waste treatment, the food waste disposers method (FWDs), as a newcomer, has become slowly accepted by the general public owing to the worries about its impact on the existing sewage system. This paper aims to justify the role of FWDs in the process of urbanization in order to better prepare a city to take good care of the construction of its infrastructure and the solid waste treatment. Both the literatures and the case study help to confirm that FWDs has no negative effects on the wastewater treatment plant and it is also environmental friendly by reducing the greenhouse gas emissions. In the case study, the Lappeenranta waste water treatment plant has been selected in order to figure out the possible changes to a WWTP following the integration of FWDs: the observation shows only minor changes take place in a WWTP, in case of 25% application, like BOD up 7%, TSS up 6% and wastewater flowrate up 6%, an additional sludge production of 200 tons per year and the extra yield of methane up to 10000m3 per year; however, when the utilization rate of FWD is over 75%, BOD, TSS, and wastewater flowrate will experience more significant changes, thus exerting much pressure on the existing WWTP. FWDs can only be used in residential areas or cities equipped with consummate drainage network within the service sphere of WWTP, therefore, the relevant authority or government department should regulate the installation frequency of FWDs, while promoting the accessory application of FWDs. In the meanwhile, WWTP should improve their treatment process in order to expand their capacity for sludge treatment so as to stay in line with the future development of urban waste management.
Resumo:
Urban tree management in the city of Bogotá has become particularly important because it has been greatly affected by the District urban renovation and also because it is a high risk source due to the worrying physical and sanitary conditions of most of them, which result in many and frequent accidents for falling of branches or the whole structure. Since 1998, Bogotá established an institutional, legal, and technical order for the proper management of the urban woodland coverage and for ensuring thereby its survival in appropriate conditions that allow them to coexist with the urban infrastructure. This document presents the details that enabled such organization, reviews the statistics resulting from addressing the silvicultural topic in the city, and establishes a new starting point for its management based on the tree inventory as a planning tool.
Resumo:
La configuración de lugares como áreas de protección ambiental puede ser vista como un proceso técnico y objetivo, en el que se crean políticas públicas que definen prácticas adecuadas e inadecuadas en el lugar. Pero esta configuración es un proceso histórico y negociado. Este se construye en contante diálogo entre diferentes actores que se preocupan por definir qué es la naturaleza y el cuidado ambiental, y las percepciones que individuos que habitan en o cerca a estos lugares construyen en su diario vivir. Es así como la configuración socioambiental de lugares como áreas de protección ocurre por transformaciones en la forma de percibir un lugar, la relaciones con este y sobre todo, prácticas y relaciones que se traducen en formas de negociar nociones de naturaleza y cuidado ambiental. Esta negociación tiene grandes implicaciones en los individuos, particularmente en su subjetividad. Es decir, en hechos como la forma de nombrarlo, caminarlo, observar las especies, iniciar proyectos de agricultura orgánica, cambiar prácticas productivas, el cerramiento de zonas para proteger las fuentes de agua o zonas de vegetación. También sobre su subjetividad, la manera como se sienten frente al lugar, como juzgan sus acciones y las de otros y cómo construyen objetivos personales con respecto a la idea de cuidado ambiental.
Resumo:
El proyecto ‘SIG de parques y jardines de Figueres’ es un proyecto complejo que integra aplicaciones SIGweb y SIG desktop, para la gestión y comunicación del estado y características de la vegetación urbana de la ciudad de Figueres. A lo largo del artículo se describen las diferentes soluciones tecnológicas desarrolladas, sus funciones y componentes
Resumo:
Landscape restoration has the potential to mitigate habitat loss and fragmentation. However, restoration can take decades to reach the ecological conditions of the target habitats. The National Trust’s Stonehenge Landscape Restoration Project provides an opportunity to evaluate the ecological benefits against the economic and temporal costs. A field survey between June and September 2010 using Lepidoptera as bio-indicators showed that restored grasslands can approach the ecological conditions of the target chalk grassland habitat within 10 years. However, specialist species like Lysandra bellargus (Adonis blue) were absent from restored grasslands and may require additional management to assist their colonisation. Analysis of the Lepidoptera communities showed that both small-scale habitat heterogeneity and age of the habitat were important for explaining Lepidoptera occurrence. These results demonstrate that habitat restoration at the landscape scale combined with appropriate site-scale management can be a relatively rapid and effective method to restore ecological networks and buffer against future climate change.
Resumo:
Eddy covariance measurements of the turbulent sensible heat, latent heat and carbon dioxide fluxes for 12 months (2011–2012) are reported for the first time for a suburban area in the UK. The results from Swindon are comparable to suburban studies of similar surface cover elsewhere but reveal large seasonal variability. Energy partitioning favours turbulent sensible heat during summer (midday Bowen ratio 1.4–1.6) and latent heat in winter (0.05–0.7). A significant proportion of energy is stored (and released) by the urban fabric and the estimated anthropogenic heat flux is small but non-negligible (0.5–0.9 MJ m−2 day−1). The sensible heat flux is negative at night and for much of winter daytimes, reflecting the suburban nature of the site (44% vegetation) and relatively low built fraction (16%). Latent heat fluxes appear to be water limited during a dry spring in both 2011 and 2012, when the response of the surface to moisture availability can be seen on a daily timescale. Energy and other factors are more relevant controls at other times; at night the wind speed is important. On average, surface conductance follows a smooth, asymmetrical diurnal course peaking at around 6–9 mm s−1, but values are larger and highly variable in wet conditions. The combination of natural (vegetative) and anthropogenic (emission) processes is most evident in the temporal variation of the carbon flux: significant photosynthetic uptake is seen during summer, whilst traffic and building emissions explain peak release in winter (9.5 g C m−2 day−1). The area is a net source of CO2 annually. Analysis by wind direction highlights the role of urban vegetation in promoting evapotranspiration and offsetting CO2 emissions, especially when contrasted against peak traffic emissions from sectors with more roads. Given the extent of suburban land use, these results have important implications for understanding urban energy, water and carbon dynamics.
Resumo:
Smart water metering technologies for residential buildings offer, in principle, great opportunities for sustainable urban water management. However, much of this potential is as yet unrealized. Despite that several ICT solutions have already been deployed aiming at optimum operations on the water utilities side (e.g. real time control for water networks, dynamic pump scheduling etc.), little work has been done to date on the consumer side. This paper presents a web-based platform targeting primarily the household end user. The platform enables consumers to monitor, on a real-time basis, the water demand of their household, providing feedback not only on the total water consumption and relevant costs but also on the efficiency (or otherwise) of specific indoor and outdoor uses. Targeting the reduction of consumption, the provided feedback is combined with notifications about possible leakages\bursts, and customised suggestions to improve the efficiency of existing household uses. It also enables various comparisons, with past consumption or even with that of similar households, aiming to motivate further the householder to become an active player in the water efficiency challenge. The issue of enhancing the platform’s functionality with energy timeseries is also discussed in view of recent advances in smart metering and the concept of “smart cities”. The paper presents a prototype of this web-based application and critically discusses first testing results and insights. It also presents the way in which the platform communicates with central databases, at the water utility level. It is suggested that such developments are closing the gap between technology availability and usefulness to end users and could help both the uptake of smart metering and awareness raising leading, potentially, to significant reductions of urban water consumption. The work has received funding from the European Union FP7 Programme through the iWIDGET Project, under grant agreement no318272.
Resumo:
If urban planning is to support the equitable distribution of public goods and services, it must recognize and address the dismal condition of millions of poor people who are living in a city. The primary focus of contemporary planners and planning students should be on finding and advocating solutions that help eliminate the problems of today¿s cities. Any meaningful solution will need to be grounded in a thorough understanding of the social class inequities of citizens. With the rapid development of national economy and urbanization process in Brazil over the last two decades, the number of vehicles and their travels are dramatically increased. This is particularly evident in all large cities. Traffic congestion becomes more and more severe. Inadequate parking facilities often result in difficulty to find a parking space in large cities and many illegally parked vehicles can be seen on the crowed streets. These illegally parked vehicles further intensify traffic congestion and also pose a traffic safety hazard. The process of urbanization and motorization in Brazil is likely to continue in a rapid pace. The urban public passengers transport modes problems in large cities are likely to get even worse. There is an urgent need for the development of policy and criteria for public service of urban public passenger transport by bus in large cities. The purpose of survey is to develop policy guidelines for public transport services planning, design, construction and mobility management, that meet community needs for accessibility in large cities. So this thesis will present major comparative characteristics of urban mobility management, urban public passengers transport by bus services planning and the quality of social life in two towns of Brazil: Rio de Janeiro and Curitiba. The study case has been focused on Rio de Janeiro and Curitiba because of the major different results of the survey presented by the two cities. The objectives of this thesis are: a) to analyze and discus existing urban mobility related accessibility and economic development problems in large cities; b) to provide an overview of the relationship within city ¿ quality of social life ¿ urban mobility in Rio and Curitiba; c) to analyze and discuss existing urban mobility management related public transport services in Rio and Curitiba; d) to analyze and discuss existing quality of bus public transport services problems in Rio. Some preliminary recommendations for mobility management policies will also be presented.