The Myth - Food Truck

Food truck de comida típica colombiana fusión que espera solucionar la percepción que se tiene acerca de la comida callejera. Para ello, se ha realizado un estudio donde se identifica el problema y se plantea como solución la creación de un food truck que cumpla con todos los estándares de calidad y a su vez innove.

Integrated Product Development in Truck Industry - A Case Study on Product Development Processes

This paper presents the result from a case study at Scania on product development processes. The objective with the case study was to gather information on Scania’s product development process (PDP) including the use of CAD and simulation tools, and project work. The objective was also to find any deviations or different interpretations among the employees on the PDP. To gather the information, semi-structured tape-recorded interviews have been used to ensure that individual interpretations from the interviewees could be gathered. Scania uses a defined and structured PDP which facilitates concurrent and cross-functional work. The PDP is implemented and followed to various degrees. The newly employed personnel may have difficulties with communication, both to find and to give information. Although, newly graduated personnel may find it easier to adapt to changes, and also to use a structured process which they have studied at universities. It was also known during the case study that the PDP is a major support for the newly employed personnel, which in turn decreases the time to get into the same working process as the more experienced personnel. Employees with decades of experience know the right sources from which to both give and gather information. Also, the terminology and definitions in the product development process may not be used as intended. This makes it difficult for other project members or teams who need to interpret the information received. At the same time, the routines among the more experienced personnel, which have been set-up throughout the years, make them more inflexible in adapting changes. The findings in the case study as well as challenges with implementing the PDP are known to Scania and are a part of the continuing work with improvement.

The effects of taxing truck distance on CO2 emissions from transports in retailing

To finance transportation infrastructure and to address social and environmental negative externalities of road transports, several countries have recently introduced or consider a distance based tax on trucks. In the competitive retail market such tax can be expected to lower the demand and thereby reduce CO2 emissions of road transports. However, as we show in this paper, such tax might also slow down the transition towards e-tailing. Considering that previous research indicates that a consumer switching from brick-and-mortar shopping to e-tailing reduces her CO2 emissions substantially, the direction and magnitude of the environmental net effect of the tax is unclear. In this paper, we assess the net effect in a Swedish regional retail market where the tax not yet is in place. We predict the net effect on CO2 emissions to be positive, but off-set by about 50% because of a slower transition to e-tailing.

Image processing technique to count the number of logs in a timber truck

This paper summarises the results of using image processing technique to get information about the load of timber trucks before their arrival using digital images or geo tagged images. Once the images are captured and sent to sawmill by drivers from forest, we can predict their arrival time using geo tagged coordinates, count the number of (timber) logs piled up in a truck, identify their type and calculate their diameter. With this information we can schedule and prioritise the inflow and unloading of trucks in the light of production schedules and raw material stocks available at the sawmill yard. It is important to keep all the actors in a supply chain integrated coordinated, so that optimal working routines can be reached in the sawmill yard.   

Genre, gender and interpretation of movie trailers an exploratory study

Commercial movies cost tens of millions to make. Because they are now released on thousands of screens simultaneously, movie trailers are a major and necessary method of intensively promoting movies before they disappear from cinemas forever. Yet there is a paucity of research about how potential audiences react to these trailers. This study aimed at exploring consumers’ interpretations of movie trailers. Nineteen in-depth interviews were the means of data collection, using nine trailers for yet to be released movies from the romance/drama, action, comedy and thriller categories. Genre provided a focus for exploring consumers’ interpretations of movie trailers. Evaluative judgments of movies came first as a result of the value of genre to the consumer and then as a result of content which conveyed the movie would be involving relative to past movie experiences. Interpretations about the target audience for a movie were also influenced by assumptions that genre preferences differ according to gender. The findings pose implications for the construction of movie trailers.

Experimental stress analysis of a steel light truck wheel

The development of a new automotive wheel requires extensive testing and possible design changes. The wheel investigated had three major changes during development. These three designs were subjected to a stress analysis, by experimental methods, to allow a comparison to be made between each design. The experimental program tested the wheels under conditions designed to simulate the loading of the front wheels whilst cornering. A loading frame was built for this purpose and all testing was performed statically by multiple loading for different directions of bending moment. Brittle lacquer coatings were used on each wheel to highlight high strain areas and indicate optimum locations for the placement of strain gauges. The strain gauges were then used to evaluate the strains. Wheel stud loads were also monitored via strain gauges applied to two of the wheel studs. All data was stored on magnetic tapes and the stress analysis performed by means of a minicomputer. The results of the stress analysis showed quantitatively the improvement in design from the first to the third wheel design. The analysis of the stud loads and their variation during loading indicated the optimum wheel mounting face geometry to ensure nut loosening would not occur in service.

Effects of the season of the year, truck type and location on truck on skin bruises and meat quality in pigs

The purpose of this study was to evaluate the effect of the season of the year (summer vs winter), type of truck (A: single decker vs B : double-decker) and pig location on the truck (front, middle, rear) on the incidence of skin bruising and pork quality variation. For this purpose, 2660 gilts of an average weight of 126.7 (+/- 6.6) kg originating from 19 different farms were used. No interaction between season of the year, type of truck and location on truck was observed. A higher number of bruises on the body at unloading and slaughter (P < 0.0001) and a higher number of bruises on the carcass (P < 0.01) were observed in winter. At unloading a higher number of bruises on the body and on the carcass after slaughter was observed in pigs transported on Truck A (P=0.004 and P=0.05). A higher, although not significant, number of bruises was found on the body of pigs transported in the rear compartment of both trucks. Higher paleness value was found in the longissimus and semimembranosus muscles in summer (P=0.0001) than in winter. Cold and heat stress have a negative influence on skin bruises and meat quality, respectively. Poor vehicle design increases the incidence of bruised carcasses without detracting from pork quality regardless of the climate conditions tested and location of the animal it] the truck. (c) 2006 Elsevier B.V. All rights reserved.

Considerations in light truck suspension design

The present work aims at to approach considerations of trucks suspension design. The proposal of the work consists of discussing the aspects related to the acting of the suspension and of factors that interact with the system through representative models of the dynamic behaviour of the vehicle ride when operating in total load and/or empty conditions. The importance of this work is to revise some procedures of suspension study in the sense of adapting them to the Brazilian reality, tends in view the importance of the design characterisation and adaptation to the typical roads of Brazil. Copyright © 2000 Society of Automotive Engineers, Inc.

Avaliação das condições sanitárias de trailers de lanche do município de Presidente Prudente - SP

Pós-graduação em Medicina Veterinária - FMVZ

Can postural control performance be an indicator of truck drivers' sleep deprivation?

Long-haul drivers work in irregular schedules due to load delivery demands. In general, driving and sleeping occur at irregular times and, consequently, partial sleep deprivation and/or circadian misalignment may emerge and result in sleepiness at the wheel. In this way, the aim of this study was to verify changes in the postural control parameters of professional drivers after one-night working. Eight male truck drivers working at night - night drivers (ND) and nine day drivers (DD) volunteered to participate in this study. The night drivers' postural stability was assessed immediately before and after an approximately 430 km journey by two identical force platforms at departure and arrival sites. The DD group was measured before and after a day's work. An interaction effect of time of day and type of shift in both conditions: eyes open (p < 0.01) and eyes closed (p < 0.001) for amplitude of mediolateral movements was observed. Postural stability, measured by force platform, is affected by a night of work, suggesting that it could be an effect of circadian and homeostatic influences over postural control.

Irregular working times and metabolic disorders among truck drivers: a review

A number of studies to better understand the complex physiological mechanism involved in regulating body weight have been conducted. More specifically, the hormones related to appetite, leptin and ghrelin, and their association to obesity have been a focus of investigation. Circadian patterns of these hormones are a new target of research. The behaviour of these hormones in individuals subject to atypical working times such as shiftwork remains unclear. Shiftwork is characterized by changes in biological rhythms and cumulative circadian phase changes, being associated with high rates of obesity and metabolic syndrome. Truck drivers, who work irregular shifts, frequently present a high prevalence of obesity, which might be associated with work-related factors and/or lifestyle. In this context, the aim of this paper was to discuss the relationship of body mass index, appetite-related hormones and sleep characteristics in truck drivers who work irregular shifts compared with day workers.

Amphetamine, cocaine and cannabinoids use among truck drivers on the roads in the State of Sao Paulo, Brazil

Drugs are important risk factors for traffic accidents. In Brazil, truck drivers report using amphetamines to maintain their extensive work schedule and stay awake. These drugs can be obtained without prescription easily on Brazilian roads. The use of these stimulants can result in health problems and can be associated with traffic accidents. There are Brazilian studies that show that drivers use drugs. However, these studies are questionnaire-based and do not always reflect real-life situations. The purpose of this study was to demonstrate the prevalence of drug use by truck drivers on the roads of Sao Paulo State, Brazil, during 2009. Drivers of large trucks were randomly stopped by police officers on the interstate roads during morning hours. After being informed of the goals of the study, the drivers gave written informed consent before providing a urine sample. In addition, a questionnaire concerning sociodemographic characteristics and health information was administered. Urine samples were screened for amphetamines, cocaine, and cannabinoids by immunoassay and the confirmation was performed using gas chromatography-mass spectrometry (GC-MS). Of the 488 drivers stopped, 456 (93.4%) provided urine samples, and 9.3% of them (n = 42) tested positive for drugs. Amphetamines were the most commonly found (n = 26) drug, representing 61.9% of the positive samples. Ten cases tested positive for cocaine (23.8%), and five for cannabinoids (11.9%). All drivers were male with a mean age of 40 +/- 10.8 years, and 29.3% of them reported some health problem (diabetes, high blood pressure and/or stress). A high incidence of truck drivers who tested positive for drug use was found, among other reported health problems. Thus, there is an evident need to promote a healthier lifestyle among professional drivers and a need for preventive measures aimed at controlling the use of drugs by truck drivers in Brazil. (C) 2011 Elsevier Ireland Ltd. All rights reserved.

Concept Fire Truck

A prototype Concept Fire Truck was designed using Autodesk Inventor 3D Design Software. Various pictures of old-time and toy fire trucks were utilized for this project. The prototype was printed using a 3D printer to verify that all parts of the truck would fit and work as intended.