Strain hardening behavior of high performance FBDP, TRIP and TWIP steels

Based on n-value differential equation and microstructural observation, strain hardening behaviors of FBDP, TRIP, and TWIP steels during uniaxial tension were investigated. TRIP steel exhibits both superior strength and ductility than FBDP steel, and TWIP steel displays much higher total and uniform elongations in comparison to FBDP and TRIP steels. The instantaneous n values of FBDP and TRIP steels increase at small strains, reach a maximum value, smoothly decrease at higher strains, and then rapidly drop up to the specimen rupture. The strain hardening of TRIP steel persists at higher strains where that of FBDP steel begins to diminish. TWIP steel exhibits gradually increased instantaneous n values over the whole uniform plastic deformation, implying that TWIP steel shows a much larger strain hardening capability than FBDP and TRIP steels.

Crystalline Structures and α → β and γ polymorphs transformation induced by nanoclay in PVDF-based nanocomposite

Poly(vinylidene fluoride) (PVDF) nanocomposites were prepared by melt-mixing. The dispersion of clay platelets and rheology of nanocomposites were analyzed using X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM) and rheometric mechanical spectrometer (RMS). The transformation of α to β and γ phase in PVDF was induced by the addition of nanoclay and subsequently the isothermal crystallization kinetics of neat PVDF and its nanocomposite have been investigated. The interaction between clay nanofillers and PVDF macromolecular chains induced the change of conformation from trans-gauche to all-trans crystal structure in PVDF segment. The isothermal crystallization of PVDF/clay nanocomposites was carried out by Differential Scanning Calorimetry (DSC) technique. The influence of clay platelets on nucleation crystallization rate and Avrami exponent were studied. PVDF/clay nanocomposite showed higher crystallization rate indicating that nanoclay has acted as an effective nucleation agent. This nucleation effect of nanoclay increased the Avrami exponent and decreased the degree of crystallinity. © 2014 World Scientific Publishing Company.

The formation of complex microstructures after different deformation modes in advanced high-strength steels

The microstructure of transformation induced plasticity (TRIP) and dual phase (DP) multiphase steels after stamping of an industrial component at different strain levels was investigated using transmission electron microscopy. The TRIP steel microstructure showed a more complex dislocation substructure of ferrite at different strain levels than DP steel. The deformation microstructure of the stamped parts was compared to the deformation microstructure in these complex steels for different "equivalent" tensile strains. It was found that the microstructures are similar only at high levels of strain (>10 pct) for both steels. © 2014 The Minerals, Metals & Materials Society and ASM International.

The effect of deformation twinning on stress localization in a three dimensional TWIP steel microstructure

We present an investigation of the effect of deformation twinning on the visco-plastic response and stress localization in a low stacking fault energy twinning-induced plasticity (TWIP) steel under uniaxial tension loading. The three-dimensional full field response was simulated using the fast Fourier transform method. The initial microstructure was obtained from a three dimensional serial sectionusing electron backscatter diffraction. Twin volume fraction evolution upon strain was measured so the hardening parameters of the simple Voce model could be identified to fit both the stress-strain behavior and twinning activity. General trends of texture evolution were acceptably predicted including the typical sharpening and balance between the 1 1 1 fiber and the 1 0 0 fiber. Twinning was found to nucleate preferentially at grain boundaries although the predominant twin reorientation scheme did not allow spatial propagation to be captured. Hot spots in stress correlated with the boundaries of twinned voxel domains, which either impeded or enhanced twinning based on which deformation modes were active locally.

Metodologia para caracterização metalográfica de um aço TRIP por microscopia óptica

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Estudo do envelhecimento após deformação em um aço complex phase

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Estudo da transformação da austenita retida induzida por deformação, de um aço AISI4340 com estrutura multifásica

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Long-term injury induced plasticity in {\it Aplysia\/} neurons: Behavioral, electrophysiological, and morphological studies

Nerve injury is known to produce a variety of electrophysiological and morphological neuronal alterations (reviewed by Titmus and Faber, 1990; Bulloch and Ridgeway, 1989; Walters, 1994). Determining if these alterations are adaptive and how they are activated and maintained could provide important insight into basic cellular mechanisms of injury-induced plasticity. Furthermore, characterization of injury-induced plasticity provides a useful assay system for the identification of possible induction signals underlying these neuronal changes. Understanding fundamental mechanisms and underlying induction signals of injury-induced neuronal plasticity could facilitate development of treatment strategies for neural injury and neuropathic pain in humans.^ This dissertation characterizes long-lasting, injury-induced neuronal alterations using the nervous system of Aplysia californica as a model. These changes are examined at the behavioral, electrophysiological, and morphological levels. Injury-induced changes in the electrophysiological properties of neurons were found that increased the signaling effectiveness of the injured neurons. This increase in signalling effectiveness could act to compensate for partial destruction of the injured neuron's peripheral processes. Recovery of a defensive behavioral response which serves to protect the animal from further injury was found within 2 weeks of injury. For the behavioral recovery to occur, new neural pathways must have been formed between the denervated area and the CNS. This was found to be mediated at least in part by new axonal growth which extended from the injured cell back along the original pathway (i.e. into the injured nerve). In addition, injury produced central axonal sprouting into different nerves that do not usually contain the injured neuron's axons. This could be important for (i) finding alternative pathways to the periphery when the original pathways are impassable and (ii) the formation of additional synaptic connections with post-synaptic targets which would further enhance the signalling effectiveness of the injured cell. ^

Predator-Induced Plasticity in Spotted Salamanders (Ambystoma maculatum)

The ability to respond plastically to the environment has allowed amphibians to evolve adaptive responses to spatial and temporal variation in predation threat. However, animals exposed to predators may also show costs of plasticity or tradeoffs. This study examines predator-induced plasticity in larval development, behavior, and metamorphosis in the spotted salamander, Ambystoma maculatum. Salamanders were raised in two treatments: with predator cues (a fish predator, genus Lepomis, on the other side of a divided tank), or without predator cues. During the larval stage the predator treatment group experienced higher mortality rates than the no-predator treatment group. Behavioral trials revealed that predator treatment animals ate less than those not exposed, and that this feeding response was immediately inducible and had lasting effects. Animals in the predator treatment group had smaller tail areas during the mid-larval period. Feeding and body size effects may have contributed to increased mortality in the predator-treatment animals. The timing of metamorphic onset was not affected by the presence of predators, but predator-treatment salamanders had shorter snout/vent lengths at metamorphosis. The duration of metamorphosis showed a potentially adaptive plastic response to the presence of predator cues: metamorphosis was longest in the no-predator treatment group, reduced in the predator treatment group, and even further reduced for animals exposed to predator cues only during metamorphosis. Overall, we found a mix of potentially adaptive and costly plastic responses in spotted salamanders.

Oncogenic transformation induced by the Qin protein is correlated with transcriptional repression

The retroviral oncogene qin codes for a protein that belongs to the family of the winged helix transcription factors. The viral Qin protein, v-Qin, differs from its cellular counterpart, c-Qin, by functioning as a stronger transcriptional repressor and a more efficient inducer of tumors. This observation suggests that repression may be important in tumorigenesis. To test this possibility, chimeric proteins were constructed in which the Qin DNA-binding domain was fused to either a strong repressor domain (derived from the Drosophila Engrailed protein) or a strong activator domain (from the herpes simplex virus VP16 protein). The chimeric transcriptional repressor, Qin–Engrailed, transformed chicken embryo fibroblasts in culture and induced sarcomas in young chickens. The chimeric activator, Qin–VP16, failed to transform cells in vitro or in vivo and caused cellular resistance to oncogenic transformation by Qin. These data support the conclusion that the Qin protein induces oncogenic transformation by repressing the transcription of genes which function as negative growth regulators or tumor suppressors.

Hormone-regulatable neoplastic transformation induced by a Jun-estrogen receptor chimera

The v-jun oncogene encodes a nuclear DNA binding protein that functions as a transcription factor and is part of the activator protein 1 complex. Oncogenic transformation by v-jun is thought to be mediated by the aberrant expression of specific target genes. To identify such Jun-regulated genes and to explore the mechanisms by which Jun affects their expression, we have fused the full-length v-Jun and an amino-terminally truncated form of v-Jun to the hormone-binding domain of the human estrogen receptor. The two chimeric proteins function as ligand-inducible transactivators. Expression of the fusion proteins in chicken embryo fibroblasts causes estrogen-dependent transformation.

Effect of retained austenite on wear resistance of nanostructured dual phase steels

Nanostructured super bainitic and quenching-partitioning (Q&P) martensitic steels with a significant amount of retained austenite obtained by low temperature bainitic transformation and Q&P respectively were studied to explore the effect of retained austenite on stirring wear resistance. The results suggest that the Q&P martensitic steel significantly enhanced the hardness of the worn surface (from 674 to 762 HV1) and increased the thickness of the deformed layer (,3.3 mm), compared to the nanostructured bainitic steel. The underlying reason is that the Q&P martensitic steel has a higher stability of retained austenite thereby providing a superior transformation induced plasticity effect to increase surface hardness and reduce wear rate during the wear process.

Three-dimensional atom probe analysis of solute distribution in thermomechanically processed TRIP steels

Complex multiphase microstructures were obtained in transformation induced plasticity C–Mn–Si–(Nb–Al–Mo) steels by simulated controlled thermomechanical processing. These microstructures were characterized using transmission electron microscopy, X-ray diffraction and three-dimensional atom probe tomography (APT), which was used to determine the partitioning of elements between different phases and microconstituents. The measured carbon concentration (not, vert, similar0.25 at%) in the ferrite of carbide-free bainite was higher than expected from para-equilibrium between the austenite and ferrite, while the concentrations of substitutional elements were the same as in the parent austenite suggesting that incomplete bainite transformation occurred. In contrast, the distribution of substitutional elements between the ferrite lath and austenite in carbide-containing bainite indicated a complete bainite reaction. The average carbon content in the retained austenite (3.2 ± 1.6 at%) was somewhat higher than the T0 limit. On the basis of the APT measured composition, the calculated Ms temperatures for retained austenite were above room temperature, indicating its low chemical stability.

Multiphase material modelling by multiscale particle-in-cell method

A particle-based method for multiscale modeling of multiphase materials such as Dual Phase (DP) and Transformation Induced Plasticity (TRIP) steels has been developed. The multiscale Particle-In-Cell (PIC) method benefits from the many advantages of the FEM and mesh-free methods, and to bridge the micro and macro scales through homogenization. The conventional mesh-based modeling methods fail to give reasonable and accurate predictions for materials with complex microstructures. Alternatively in the multiscale PIC method, the Lagrangian particles moving in an Eulerian grid represent the material deformation at both the micro and macro scales. The uniaxial tension test of two phase and three-phase materials was simulated and compared with FE based simulations. The predictions using multiscale PIC method showed that accuracy of field variables could be improved by up to 7%. This can lead to more accurate forming and springback predictions for materials with important multiphase microstructural effects.