Total bacterial counting and the response to treatment of bacterial vaginosis with metronidazole

Objective: To evaluate if the total bacterial count of vaginal samples with bacterial vaginosis assessed by flow cytometry influences the response to treatment with metronidazol. Methods: In this cross-sectional study, 273 low-risk reproductive aged women were enrolled. Vaginal samples were taken to evaluate the pattern of vaginal flora according to Nugent’s criteria, as well as the presence of trichomoniasis and candidosis. Cases identified of bacterial vaginosis were treated with metronidazole and controlled after 45 days. Cervical infection by Chlamydia trachomatis and Neisseria gonorrhoeae were also assessed. Flow cytometry for total bacterial counting was performed in propidium iodide stained cervicovaginal samples, using fluorescent beads at a known concentration. Non-parametric Mann-Whitney test was used to compare total bacterial count between groups of interest, at p<0.05. Results: From the total of 273 women enrolled, 50 were excluded as they presented at least one of the infections investigated. Bacterial vaginosis was detected in 79 women (35.4%), of which 33 (41.8%) returned for re-evaluation after treatment, being 21 cases successfully treated and 12 with persistent abnormal vaginal flora. Flow cytometric data showed that total bacterial counting does not differ between normal flora and bacterial vaginosis samples (p=0.14). Also, no difference was found between the cases of treated and persistent bacterial vaginosis (p=0.48). Conclusion: Total bacterial counting does not influence the response to metronidazole treatment of bacterial vaginosis

Exometaboloma do tegumento da vespa social Polybia paulista por análises GC-MS: bases moleculares do reconhecimento de tipos parentais

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Influence of preoperative functional status on outcome after total hip arthroplasty

BACKGROUND: International registries with large, heterogeneous patient populations provide excellent research opportunities for studying factors that influence treatment outcomes after total hip arthroplasty. In the present study, we used a European multinational database to investigate whether there is an association between three functional variables (preoperative pain, mobility, and motion) and functional outcome. METHODS: We performed a retrospective cohort study on preoperative and follow-up clinical data that were prospectively entered into the International Documentation and Evaluation System European hip registry between 1967 and 2002. The inclusion criteria for this study were an age of more than twenty years, an underlying diagnosis of osteoarthritis, and a Charnley class-A functional designation at the time of surgery. A total of 12,925 patients (13,766 total hip arthroplasties) who met these criteria were entered into the analysis. Three functional variables (pain, mobility, and motion) that were assessed preoperatively were evaluated postoperatively at various follow-up examinations for a maximum of ten years. RESULTS: Six thousand four hundred and one patients could walk longer than ten minutes preoperatively; of these, 57.1% had a walking capacity of more than sixty minutes at the time of the most recent follow-up. In comparison, 6896 patients had a preoperative walking capacity of less than ten minutes and only 38.9% of these patients could walk more than sixty minutes at the time of the most recent follow-up. The difference was significant (p < 0.01). Similarly, 10,375 patients had a preoperative hip flexion range of >70 degrees ; of these, 74.7% had a flexion range of >90 degrees at the time of the most recent follow-up. In comparison, 2793 patients had a preoperative hip flexion range of <70 degrees and only 62.6% of these patients had a flexion range of >90 degrees at the time of the most recent follow-up. The difference was also significant (p < 0.01). Lasting, complete, or almost complete pain relief was achieved by >80% of the patients following total hip arthroplasty regardless of their preoperative categorization of pain. CONCLUSIONS: Patients with poor preoperative walking capacity and hip flexion are less likely to achieve an optimal outcome with regard to walking and motion. In contrast, there is no correlation between the preoperative pain level and pain alleviation, which is generally good and long-lasting after total hip arthroplasty.

Imaging of total colonic Hirschsprung disease

BACKGROUND: Hirschsprung disease (HD) is a functional obstruction of the bowel caused by the absence of intrinsic enteric ganglion cells. The diagnosis of total colonic HD (TCHD) based on contrast enemas is difficult in newborns because radiological findings vary. OBJECTIVE: To evaluate the radiographic and contrast enema findings in patients with pathologically proven TCHD. MATERIALS AND METHODS: From 1966 to 2007, 17 records from a total of 31 patients with TCHD were retrospectively evaluated for diameter and shape of the colon, diameter of the small bowel, bowel wall contour, ileal reflux, abdominal calcifications, pneumoperitoneum, filling defects, transitional zones and rectosigmoid index. RESULTS: Three colonic patterns of TCHD were found: microcolon, question-mark-shape colon and normal caliber colon. Additional findings included spasmodic colon, ileal reflux, delayed evacuation and abdominal calcifications. Colonic transitional zones were found in eight patients with TCHD. CONCLUSION: The diagnosis of TCHD is difficult to establish by contrast enema studies. The length of the aganglionic small bowel and the age of the patient can influence the radiological findings in TCHD. The transitional zone and the rectosigmoid index can be false-positive in TCHD. The colon can appear normal. Consider TCHD if the contrast enema study is normal but the patient remains symptomatic and other causes of distal bowel obstruction have been excluded.

Development of a high performance parallel computing platform and its use in the study of nanostructures : clusters, sheets and tubes .

Small clusters of gallium oxide, technologically important high temperature ceramic, together with interaction of nucleic acid bases with graphene and small-diameter carbon nanotube are focus of first principles calculations in this work. A high performance parallel computing platform is also developed to perform these calculations at Michigan Tech. First principles calculations are based on density functional theory employing either local density or gradient-corrected approximation together with plane wave and gaussian basis sets. The bulk Ga2O3 is known to be a very good candidate for fabricating electronic devices that operate at high temperatures. To explore the properties of Ga2O3 at nonoscale, we have performed a systematic theoretical study on the small polyatomic gallium oxide clusters. The calculated results find that all lowest energy isomers of GamOn clusters are dominated by the Ga-O bonds over the metal-metal or the oxygen-oxygen bonds. Analysis of atomic charges suggest the clusters to be highly ionic similar to the case of bulk Ga2O3. In the study of sequential oxidation of these slusters starting from Ga2O, it is found that the most stable isomers display up to four different backbones of constituent atoms. Furthermore, the predicted configuration of the ground state of Ga2O is recently confirmed by the experimental result of Neumark's group. Guided by the results of calculations the study of gallium oxide clusters, performance related challenge of computational simulations, of producing high performance computers/platforms, has been addressed. Several engineering aspects were thoroughly studied during the design, development and implementation of the high performance parallel computing platform, rama, at Michigan Tech. In an attempt to stay true to the principles of Beowulf revolutioni, the rama cluster was extensively customized to make it easy to understand, and use - for administrators as well as end-users. Following the results of benchmark calculations and to keep up with the complexity of systems under study, rama has been expanded to a total of sixty four processors. Interest in the non-covalent intereaction of DNA with carbon nanotubes has steadily increased during past several years. This hybrid system, at the junction of the biological regime and the nanomaterials world, possesses features which make it very attractive for a wide range of applicatioins. Using the in-house computational power available, we have studied details of the interaction between nucleic acid bases with graphene sheet as well as high-curvature small-diameter carbon nanotube. The calculated trend in the binding energies strongly suggests that the polarizability of the base molecules determines the interaction strength of the nucleic acid bases with graphene. When comparing the results obtained here for physisorption on the small diameter nanotube considered with those from the study on graphene, it is observed that the interaction strength of nucleic acid bases is smaller for the tube. Thus, these results show that the effect of introducing curvature is to reduce the binding energy. The binding energies for the two extreme cases of negligible curvature (i.e. flat graphene sheet) and of very high curvature (i.e. small diameter nanotube) may be considered as upper and lower bounds. This finding represents an important step towards a better understanding of experimentally observed sequence-dependent interaction of DNA with Carbon nanotubes.

Effects of fixed night shift work on 24 hour blood pressure regulation, state anxiety levels and total sleep time

Nearly 22 million Americans operate as shift workers, and shift work has been linked to the development of cardiovascular disease (CVD). This study is aimed at identifying pivotal risk factors of CVD by assessing 24 hour ambulatory blood pressure, state anxiety levels and sleep patterns in 12 hour fixed shift workers. We hypothesized that night shift work would negatively affect blood pressure regulation, anxiety levels and sleep patterns. A total of 28 subjects (ages 22-60) were divided into two groups: 12 hour fixed night shift workers (n=15) and 12 hour fixed day shift workers (n=13). 24 hour ambulatory blood pressure measurements (Space Labs 90207) were taken twice: once during a regular work day and once on a non-work day. State anxiety levels were assessed on both test days using the Speilberger’s State Trait Anxiety Inventory. Total sleep time (TST) was determined using self recorded sleep diary. Night shift workers demonstrated increases in 24 hour systolic (122 ± 2 to 126 ± 2 mmHg, P=0.012); diastolic (75 ± 1 to 79 ± 2 mmHg, P=0.001); and mean arterial pressures (90 ± 2 to 94 ± 2mmHg, P<0.001) during work days compared to off days. In contrast, 24 hour blood pressures were similar during work and off days in day shift workers. Night shift workers reported less TST on work days versus off days (345 ± 16 vs. 552 ± 30 min; P<0.001), whereas day shift workers reported similar TST during work and off days (475 ± 16 minutes to 437 ± 20 minutes; P=0.231). State anxiety scores did not differ between the groups or testing days (time*group interaction P=0.248), suggesting increased 24 hour blood pressure during night shift work is related to decreased TST, not short term anxiety. Our findings suggest that fixed night shift work causes disruption of the normal sleep-wake cycle negatively affecting acute blood pressure regulation, which may increase the long-term risk for CVD.

Prediction of total quarter milk somatic cell counts based on foremilk sampling

Determination of somatic cell count (SCC) is used worldwide in dairy practice to describe the hygienic status of the milk and the udder health of cows. When SCC is tested on a quarter level to detect single quarters with high SCC levels of cows for practical reasons, mostly foremilk samples after prestimulation (i.e. cleaning of the udder) are used. However, SCC is usually different in different milk fractions. Therefore, the goal of this study was the investigation of the use of foremilk samples for the estimation of total quarter SCC. A total of 378 milkings in 19 dairy cows were performed with a special milking device to drain quarter milk separately. Foremilk samples were taken after udder stimulation and before cluster attachment. SCC was measured in foremilk samples and in total quarter milk. Total quarter milk SCC could not be predicted precisely from foremilk SCC measurements. At relatively high foremilk SCC levels (>300 x 10(3) cells/ml) foremilk SCC were higher than total quarter milk. At around (50-300) x 10(3) cells/ml foremilk and total quarter SCC did not differ considerably. Most interestingly, if foremilk SCC was lower than 50 x 10(3) cells/ml the total quarter SCC was higher than foremilk SCC. In addition, individual cows showed dramatic variations in foremilk SCC that were not very well related to total quarter milk SCC. In conclusion, foremilk samples are useful to detect high quarter milk SCC to recognize possibly infected quarters, only if precise cell counts are not required. However, foremilk samples can be deceptive if very low cell numbers are to be detected.

Molecular and stable isotope composition of headspace and total hydrogencarbon gases of ODP Leg 104 sites

Molecular and isotope compositions of headspace and total (free + sorbed) hydrocarbon gases from drilled cores of the three ODP Leg 104 Sites 642, 643, and 644 of the Voring Plateau are used to characterize the origin and distribution of these gases in Holocene to Eocene sediments. Only minor amounts of methane were found in the headspace (0.1 to < 0.001 vol%). Although methane through propane are present in all of the total gas samples, different origins account for the concentration and composition variations found. Site 643 at the foot of the outer Voring Plateau represents a geological setting with poor hydrocarbon generating potential, (sediments with low TOC and maturity overlying oceanic basement). Correspondingly, the total gas concentrations are low, typical for background gases (yield C1 - 4 = 31 to 232 ppb, C1/C2+ = 0.6 to 4; delta13C(CH4) -22 per mil to -42 per mil) probably of a diagenetic origin. Holocene to Eocene sediments, which overlie volcanic units, were drilled on the outer Vdring Plateau, at Holes 642B and D. Similar to Site 643, these sediments possess a poor hydrocarbon generating potential. The total gas character (yield C1 - 4 = 20 to 410 ppb; C1/C2+ = 1.7 to 13.3; delta13C(CH4) ca. -23 per mil to -40 per mil) again indicates a diagenetic origin, perhaps with the addition of some biogenic gas. The higher geothermal gradient and the underlying volcanics do not appear to have any influence on the gas geochemistry. The free gas (Vacutainer TM) in the sediments at Site 644 are dominated by biogenic gas (C1/C2+ > 104; delta13C(CH4) -77 per mil). Indications, in the total gas, of hydrocarbons with a thermogenic signature (yield C1 - 4 = 121 to 769 ppb, C1/ C2+ = 3 to 8; delta13C(CH4) = -39 per mil to -71 per mil), could not be unequivocally confirmed as such. Alternatively, these gases may represent mixtures of diagenetic and biogenic gases.

Total and species abundance of Polychaeta during POLARSTERN cruise ANT-XXIV/2, ANDEEP-SYSTCO, in the Southern Ocean

In the course of the ANDEEP-SYSTCO project, during the ANT XXIV-2 expedition in austral summer 2007/2008, the diversity and composition of the Polychaeta of the Antarctic deep-sea and adjacent South Atlantic basins were analyzed. A total of 847 individuals of 31 families were found belonging to 86 different species. Calculation of diversity (Shannon-Wiener Index, Pielou's Evenness) and the general species composition of Polychaeta showed patterns typical for the deep sea, with high species richness and low abundances. Lowest diversity was found in the Agulhas Basin in over 4000 m water depth. Lowest Evenness was found on top of Maud Rise where one-third of all Polychaeta belonged to one species. Cluster analyses resulted in higher affinities of Maud Rise to the Agulhas Basin than to the Antarctic continental slope. Explanations are sought in similarities of environmental factors (e.g., sediment, food input).

Design, implementation and evaluation of an unconstrained and contactless biometric system based on hand geometry and stress detection

Esta tesis propone un sistema biométrico de geometría de mano orientado a entornos sin contacto junto con un sistema de detección de estrés capaz de decir qué grado de estrés tiene una determinada persona en base a señales fisiológicas Con respecto al sistema biométrico, esta tesis contribuye con el diseño y la implementación de un sistema biométrico de geometría de mano, donde la adquisición se realiza sin ningún tipo de contacto, y el patrón del usuario se crea considerando únicamente datos del propio individuo. Además, esta tesis propone un algoritmo de segmentación multiescala para solucionar los problemas que conlleva la adquisición de manos en entornos reales. Por otro lado, respecto a la extracción de características y su posterior comparación esta tesis tiene una contribución específica, proponiendo esquemas adecuados para llevar a cabo tales tareas con un coste computacional bajo pero con una alta precisión en el reconocimiento de personas. Por último, este sistema es evaluado acorde a la norma estándar ISO/IEC 19795 considerando seis bases de datos públicas. En relación al método de detección de estrés, esta tesis propone un sistema basado en dos señales fisiológicas, concretamente la tasa cardiaca y la conductancia de la piel, así como la creación de un innovador patrón de estrés que recoge el comportamiento de ambas señales bajo las situaciones de estrés y no-estrés. Además, este sistema está basado en lógica difusa para decidir el grado de estrés de un individuo. En general, este sistema es capaz de detectar estrés de forma precisa y en tiempo real, proporcionando una solución adecuada para sistemas biométricos actuales, donde la aplicación del sistema de detección de estrés es directa para evitar situaciónes donde los individuos sean forzados a proporcionar sus datos biométricos. Finalmente, esta tesis incluye un estudio de aceptabilidad del usuario, donde se evalúa cuál es la aceptación del usuario con respecto a la técnica biométrica propuesta por un total de 250 usuarios. Además se incluye un prototipo implementado en un dispositivo móvil y su evaluación. ABSTRACT: This thesis proposes a hand biometric system oriented to unconstrained and contactless scenarios together with a stress detection method able to elucidate to what extent an individual is under stress based on physiological signals. Concerning the biometric system, this thesis contributes with the design and implementation of a hand-based biometric system, where the acquisition is carried out without contact and the template is created only requiring information from a single individual. In addition, this thesis proposes an algorithm based on multiscale aggregation in order to tackle with the problem of segmentation in real unconstrained environments. Furthermore, feature extraction and matching are also a specific contributions of this thesis, providing adequate schemes to carry out both actions with low computational cost but with certain recognition accuracy. Finally, this system is evaluated according to international standard ISO/IEC 19795 considering six public databases. In relation to the stress detection method, this thesis proposes a system based on two physiological signals, namely heart rate and galvanic skin response, with the creation of an innovative stress detection template which gathers the behaviour of both physiological signals under both stressing and non-stressing situations. Besides, this system is based on fuzzy logic to elucidate the level of stress of an individual. As an overview, this system is able to detect stress accurately and in real-time, providing an adequate solution for current biometric systems, where the application of a stress detection system is direct to avoid situations where individuals are forced to provide the biometric data. Finally, this thesis includes a user acceptability evaluation, where the acceptance of the proposed biometric technique is assessed by a total of 250 individuals. In addition, this thesis includes a mobile implementation prototype and its evaluation.

Comparison of different pre-treatments to improve accuracy of total soluble solids.

The applicability of a portable NIR spectrometer for estimating the °Brix content of grapes by non-destructive measurement has been analysed in field. The NIR spectrometer AOTF-NIR Luminar 5030, from Brimrose, was used. The spectrometer worked with a spectral range from 1100 to 2300 nm. A total of 600 samples of Cabernet Sauvignon grapes, belonging to two vintages, were measured in a non-destructive way. The specific objective of this research is to analyse the influence of the statistical treatment of the spectra information in the development of °Brix estimation models. Different data pretreatments have been tested before applying multivariate analysis techniques to generate estimation models. The calibration using PLS regression applied to spectra data pretreated with the MSC method (multiplicative scatter correction) has been the procedure with better results. Considering the models developed with data corresponding to the first campaign, errors near to 1.35 °Brix for calibration (SEC = 1.36) and, about 1.50 °Brix for validation (SECV = 1.52) were obtained. The coefficients of determination were R2 = 0.78 for the calibration, and R2 = 0.77 for the validation. In addition, the great variability in the data of the °Brix content for the tested plots was analysed. The variation of °Brix on the plots was up to 4 °Brix, for all varieties. This deviation was always superior to the calculated errors in the generated models. Therefore, the generated models can be considered to be valid for its application in field. Models were validated with data corresponding to the second campaign. In this sense, the validation results were worse than those obtained in the first campaign. It is possible to conclude in the need to realize an adjustment of the spectrometer for each season, and to develop specific predictive models for every vineyard.

A review of Tai Chi Chuan and parameters related to balance

Introduction: Previous systematic reviews of the literature on the effects of Tai Chi Chuan(TCC)on balance have focussed either on determining the quality of the research design or have provided just a general description of the studies.To the best of our knowledge none have approached this topic by conducting an analysis from the point of view of the factors which affect balance.It is important to present this perspective as it will help to guide future research in this field. Methodology: Seven electronic data bases were searched for publications dated between 1996 and 2012.The inclusion criteria were;randomized controlled trials(RCT)written in English. Results: From a total of 397 articles identified, 27 randomized controlled trials were eligible for the analysis. Conclusions: Studies reviewed appear to confirm that TCC improves static and dynamic balance and in the functional factors which affect balance in persons of over 55 years of age.Only one study was identified on people affected with problems with the vestibular system. No studies on the influence of TCC on improvement in balance in individuals suffering from deteriorated brain function were identified.

Defending against cybercrime: advances in the detection of malicious servers and the analysis of client-side vulnerabilities

Esta tesis se centra en el análisis de dos aspectos complementarios de la ciberdelincuencia (es decir, el crimen perpetrado a través de la red para ganar dinero). Estos dos aspectos son las máquinas infectadas utilizadas para obtener beneficios económicos de la delincuencia a través de diferentes acciones (como por ejemplo, clickfraud, DDoS, correo no deseado) y la infraestructura de servidores utilizados para gestionar estas máquinas (por ejemplo, C & C, servidores explotadores, servidores de monetización, redirectores). En la primera parte se investiga la exposición a las amenazas de los ordenadores victimas. Para realizar este análisis hemos utilizado los metadatos contenidos en WINE-BR conjunto de datos de Symantec. Este conjunto de datos contiene metadatos de instalación de ficheros ejecutables (por ejemplo, hash del fichero, su editor, fecha de instalación, nombre del fichero, la versión del fichero) proveniente de 8,4 millones de usuarios de Windows. Hemos asociado estos metadatos con las vulnerabilidades en el National Vulnerability Database (NVD) y en el Opens Sourced Vulnerability Database (OSVDB) con el fin de realizar un seguimiento de la decadencia de la vulnerabilidad en el tiempo y observar la rapidez de los usuarios a remiendar sus sistemas y, por tanto, su exposición a posibles ataques. Hemos identificado 3 factores que pueden influir en la actividad de parches de ordenadores victimas: código compartido, el tipo de usuario, exploits. Presentamos 2 nuevos ataques contra el código compartido y un análisis de cómo el conocimiento usuarios y la disponibilidad de exploit influyen en la actividad de aplicación de parches. Para las 80 vulnerabilidades en nuestra base de datos que afectan código compartido entre dos aplicaciones, el tiempo entre el parche libera en las diferentes aplicaciones es hasta 118 das (con una mediana de 11 das) En la segunda parte se proponen nuevas técnicas de sondeo activos para detectar y analizar las infraestructuras de servidores maliciosos. Aprovechamos técnicas de sondaje activo, para detectar servidores maliciosos en el internet. Empezamos con el análisis y la detección de operaciones de servidores explotadores. Como una operación identificamos los servidores que son controlados por las mismas personas y, posiblemente, participan en la misma campaña de infección. Hemos analizado un total de 500 servidores explotadores durante un período de 1 año, donde 2/3 de las operaciones tenían un único servidor y 1/2 por varios servidores. Hemos desarrollado la técnica para detectar servidores explotadores a diferentes tipologías de servidores, (por ejemplo, C & C, servidores de monetización, redirectores) y hemos logrado escala de Internet de sondeo para las distintas categorías de servidores maliciosos. Estas nuevas técnicas se han incorporado en una nueva herramienta llamada CyberProbe. Para detectar estos servidores hemos desarrollado una novedosa técnica llamada Adversarial Fingerprint Generation, que es una metodología para generar un modelo único de solicitud-respuesta para identificar la familia de servidores (es decir, el tipo y la operación que el servidor apartenece). A partir de una fichero de malware y un servidor activo de una determinada familia, CyberProbe puede generar un fingerprint válido para detectar todos los servidores vivos de esa familia. Hemos realizado 11 exploraciones en todo el Internet detectando 151 servidores maliciosos, de estos 151 servidores 75% son desconocidos a bases de datos publicas de servidores maliciosos. Otra cuestión que se plantea mientras se hace la detección de servidores maliciosos es que algunos de estos servidores podrán estar ocultos detrás de un proxy inverso silente. Para identificar la prevalencia de esta configuración de red y mejorar el capacidades de CyberProbe hemos desarrollado RevProbe una nueva herramienta a través del aprovechamiento de leakages en la configuración de la Web proxies inversa puede detectar proxies inversos. RevProbe identifica que el 16% de direcciones IP maliciosas activas analizadas corresponden a proxies inversos, que el 92% de ellos son silenciosos en comparación con 55% para los proxies inversos benignos, y que son utilizado principalmente para equilibrio de carga a través de múltiples servidores. ABSTRACT In this dissertation we investigate two fundamental aspects of cybercrime: the infection of machines used to monetize the crime and the malicious server infrastructures that are used to manage the infected machines. In the first part of this dissertation, we analyze how fast software vendors apply patches to secure client applications, identifying shared code as an important factor in patch deployment. Shared code is code present in multiple programs. When a vulnerability affects shared code the usual linear vulnerability life cycle is not anymore effective to describe how the patch deployment takes place. In this work we show which are the consequences of shared code vulnerabilities and we demonstrate two novel attacks that can be used to exploit this condition. In the second part of this dissertation we analyze malicious server infrastructures, our contributions are: a technique to cluster exploit server operations, a tool named CyberProbe to perform large scale detection of different malicious servers categories, and RevProbe a tool that detects silent reverse proxies. We start by identifying exploit server operations, that are, exploit servers managed by the same people. We investigate a total of 500 exploit servers over a period of more 13 months. We have collected malware from these servers and all the metadata related to the communication with the servers. Thanks to this metadata we have extracted different features to group together servers managed by the same entity (i.e., exploit server operation), we have discovered that 2/3 of the operations have a single server while 1/3 have multiple servers. Next, we present CyberProbe a tool that detects different malicious server types through a novel technique called adversarial fingerprint generation (AFG). The idea behind CyberProbe’s AFG is to run some piece of malware and observe its network communication towards malicious servers. Then it replays this communication to the malicious server and outputs a fingerprint (i.e. a port selection function, a probe generation function and a signature generation function). Once the fingerprint is generated CyberProbe scans the Internet with the fingerprint and finds all the servers of a given family. We have performed a total of 11 Internet wide scans finding 151 new servers starting with 15 seed servers. This gives to CyberProbe a 10 times amplification factor. Moreover we have compared CyberProbe with existing blacklists on the internet finding that only 40% of the server detected by CyberProbe were listed. To enhance the capabilities of CyberProbe we have developed RevProbe, a reverse proxy detection tool that can be integrated with CyberProbe to allow precise detection of silent reverse proxies used to hide malicious servers. RevProbe leverages leakage based detection techniques to detect if a malicious server is hidden behind a silent reverse proxy and the infrastructure of servers behind it. At the core of RevProbe is the analysis of differences in the traffic by interacting with a remote server.

Linking genome and proteome by mass spectrometry: Large-scale identification of yeast proteins from two dimensional gels

The function of many of the uncharacterized open reading frames discovered by genomic sequencing can be determined at the level of expressed gene products, the proteome. However, identifying the cognate gene from minute amounts of protein has been one of the major problems in molecular biology. Using yeast as an example, we demonstrate here that mass spectrometric protein identification is a general solution to this problem given a completely sequenced genome. As a first screen, our strategy uses automated laser desorption ionization mass spectrometry of the peptide mixtures produced by in-gel tryptic digestion of a protein. Up to 90% of proteins are identified by searching sequence data bases by lists of peptide masses obtained with high accuracy. The remaining proteins are identified by partially sequencing several peptides of the unseparated mixture by nanoelectrospray tandem mass spectrometry followed by data base searching with multiple peptide sequence tags. In blind trials, the method led to unambiguous identification in all cases. In the largest individual protein identification project to date, a total of 150 gel spots—many of them at subpicomole amounts—were successfully analyzed, greatly enlarging a yeast two-dimensional gel data base. More than 32 proteins were novel and matched to previously uncharacterized open reading frames in the yeast genome. This study establishes that mass spectrometry provides the required throughput, the certainty of identification, and the general applicability to serve as the method of choice to connect genome and proteome.

The presence of codon-anticodon pairs in the acceptor stem of tRNAs.

A total of 1268 available (excluding mitochondrial) tRNA sequences was used to reconstruct the common consensus image of their acceptor domains. Its structure appeared as a 11-bp-long double-stranded palindrome with complementary triplets in the center, each flanked by the 3'-ACCD and NGGU-5' motifs on each strand (D, base determinator). The palindrome readily extends up to the modern tRNA-like cloverleaf passing through an intermediate hairpin having in the center the single-stranded triplet, in supplement to its double-stranded precursor. The latter might represent an original anticodon-codon pair mapped at 1-2-3 positions of the present-day tRNA acceptors. This conclusion is supported by the striking correlation: in pairs of consensus tRNAs with complementary anticodons, their bases at the 2nd position of the acceptor stem were also complementary. Accordingly, inverse complementarity was also evident at the 71st position of the acceptor stem. With a single exception (tRNA(Phe)-tRNA(Glu) pair), the parallelism is especially impressive for the pairs of tRNAs recognized by aminoacyl-tRNA synthetases (aaRS) from the opposite classes. The above complementarity still doubly presented at the key central position of real single-stranded anticodons and their hypothetical double-stranded precursors is consistent with our previous data pointing to the double-strand use of ancient RNAs in the origin of the main actors in translation- tRNAs with complementary anticodons and the two classes of aaRS.