Dual-phase inkjet printed electrochromic layers based on PTA and WOX/TiO2 nanoparticles for electrochromic applications

Thesis submitted in Faculdade de Ciências e Tecnologia da Universidade Nova de Lisboa for the degree of Master in Materials Engineering

Preparation and characterization of dye-sensitized TiO2 nanorod solar cells

TiO2 nanorodswere prepared by DC reactive magnetron sputtering technique and applied to dye-sensitized solar cells (DSSCs). The length of the TiO2 nanorods was varied from 1 μm to 6 μm. The scanning electronmicroscopy images showthat the nanorods are perpendicular to the substrate. Both the X-ray diffraction patterns and Raman scattering results show that the nanorods have an anatase phase; no other phase has been observed. (101) and the (220) diffraction peaks have been observed for the TiO2 nanorods. The (101) diffraction peak intensity remained constant despite the increase of nanorod length, while the intensity of the (220) diffraction peak increased almost linearly with the nanorod length. These nanorods were used as the working electrodes in DSSCs and the effect of the nanorod length on the conversion efficiency has been studied. An optimumphotoelectric conversion efficiency of 4.8% has been achieved for 4 μm length nanorods.

Síntese de sílicas mesoporosas contendo nanopartículas de TiO2 e adsorção de bases quinoidais

Dissertação apresentada na Faculdade de Ciências e Tecnologia da Universidade Nova de Lisboa para a obtenção do grau de Mestre em Engenharia Química e Bioquímica

Desenvolvimento e caracterização de filmes de nano-compósitos de TiO2/WO3 pela técnoca de pulverização catódica

Dissertação para obtenção do Grau de Mestre em Engenharia Física

O2/CO2-sensitive cyclic AMP-signalling pathway in peripheral chemoreceptors

RESUMO: O corpo carotídeo (CB) é um pequeno órgão sensível a variações na PaO2, PaCO2 e pH. As células tipo I (células glómicas) do corpo carotídeo, as unidades sensoriais deste órgão, libertam neurotransmissores em resposta às variações dos gases arteriais. Estes neurotransmissores atuam quer em recetores pré-sinápticos, localizados nas células tipo I, quer em recetores póssinápticos, localizados nas terminações do nervo do seio carotídeo, ou em ambos. A activação dos recetores pré-sinápticos modula a atividade do corpo carotídeo, enquanto que, a activação dos recetores pós-sinápticos, de carater excitatório, desencadeia um aumento da frequência de descarga das fibras do CSN, com subsequente despolarização dos neurónios do gânglio petroso, e posterior despolarização de um grupo específico de neurónios do centro respiratório central, desencadeando, como resposta final, hiperventilação. Estes recetores pré- e pós-sinápticos podem ser classificados em ionotrópicos ou metabotrópicos, estando os últimos acoplados a adenilatos ciclases transmembranares (tmAC). O mecanismo exato pelo qual as variações dos gases arteriais são detetadas pelo CB não se encontra ainda completamente elucidado, mas tem sido sugerido que alterações nos níveis de cAMP estejam associadas ao mecanismo de deteção de variações de O2 e CO2. Os níveis de cAMP podem ser regulados através da sua via de síntese, mediada por dois tipos de adenilatos ciclases: tmAC sensível aos eurotransmissores e adenilato ciclase solúvel (sAC)sensível a variações de HCO3/CO2, e pela sua via de degradação mediada por fosfodiesterases. A via de degradação do cAMP pode ser manipulada farmacologicamente, funcionando enquanto alvo terapêutico para o tratamento de patologias do foro respiratório (e.g. asma, hipertensão pulmonar, doença pulmonar obstructiva crónica e apneia do sono), que induzem um aumento da actividade do CB.O trabalho descrito nesta dissertação partiu da hipótese de que a actividade do CB é manipulada por fármacos, que interferem com a via de sinalização do cAMP, tendo sido nosso objectivo geral, investigar o papel do cAMP na quimiotransdução do CB de rato, e determinar se a actividade dos enzimas responsáveis pela via de sinalização do cAMP é ou não regulada por variações de O2/CO2. Assim, a relevância deste trabalho é a de estudar e identificar possíveis alvos moleculares (sAC, isoformas de tmAC e PDE) com potencial para serem usados no tratamento de patologias relacionadas com o controlo respiratório. A primeira parte do presente trabalho, centrou-se na caracterização farmacológica da PDE4 no CB e em tecidos não quimiorecetores (e.g. gânglio cervical superior e artérias carótidas), e na observação do efeito de hipóxia aguda na acumulação dos níveis de cAMP, induzidos pelos inibidores de PDE, nestes tecidos. A quantificação de cAMP foi efectuada por técnica imunoenzimática (EIA), tendo sido elaboradas curvas de dose-resposta para os efeitos de inibidores, não específicos (IBMX) e específicos para a PDE2 e PDE4 (EHNA, Rolipram e Ro 20-1724), nos níveis de cAMP acumulados, em situações de normóxia (20%O2/5%CO2) e hipóxia (5%O2/5%CO2). A caracterização das PDE no gânglio cervical superior foi aprofundada, utilizando-se a técnica de transferência de energia de ressonância por fluorescência (FRET) em culturas primárias de neurónios, na presença de inibidores não específicos (IBMX) e específicos para a PDE3 e PDE4 (milrinone e rolipram, respetivamente). Foram igualmente estudadas, através de RT-qPCR, as alterações na expressão de PDE3A-B e PDE4A-D, no gânglio cervical superior, em resposta a diferentes percentagens de oxigénio. Na segunda parte do trabalho investigou-se a via de síntese do cAMP no CB em resposta a variações na concentração de HCO3/CO2. Em concreto, o protocolo experimental centrou-se na caracterização da sAC, dado que a sua actividade é regulada por variações de HCO3/CO2. A caracterização da expressão e regulação da sAC, em resposta a variações de HCO3/CO2 ,foi efectuada no CB e em tecidos não quimioreceptores periféricos (e.g. gânglio cervical superior, petroso e nodoso) por qRT-PCR. A actividade deste enzima foi caracterizada indirectamente através da quantificação dos níveis de cAMP (quantificação por EIA), induzidos por diferentes concentrações de HCO3/CO2, na presença de MDL-12,33-A, um inibidore da tmAC. A expressão das isoformas da tmAC no CB e gânglio petroso foi determinada por RT-qPCR. Adicionalmente, estudámos a contribuição relativa da tmAC e sAC no mecanismo de sensibilidade ao CO2 no CB. Para o efeito foram estudadas as alterações: 1) nos níveis de cAMP (quantificado por EIA) na presença de diferentes concentrações de HCO3/CO2 e ao longo do tempo (5-30 min); 2) na ativação da proteína cinase A (PKA, FRET baseado em sensores) em células tipo I do CB; e 3) na frequência de descarga do CSN (registos) na presença e ausência de ativadores e inibidores da sAC,tmAC e PKA. Por último, foi caracterizada a expressão e actividade da sAC nos quimioreceptors centrais (locus ceruleus, rafe e medula ventro-lateral) através de técnicas de RT-qPCR e EIA. A expressão das isoformas da tmAC foi aprofundada no locus coeruleus através de RT-qPCR. Por fim, comparámos a contribuição da tmAC e sAC nos níveis de cAMP no locus coeruleus em condições de normocapnia e hipercapnia.O nosso trabalho teve os seguintes resultados principais: 1) PDE4 está funcional no corpo carotídeo, artérias carótidas e gânglio cervical superior de rato, embora a PDE2 só se encontre funcional neste último; 2) Os efeitos dos inibidores de PDE nos níveis de acumulação de cAMP foram exacerbados em situações de hipóxia aguda no CB e artérias carótidas, mas foram atenuados no gânglio cervical superior; 3) No gânglio cervical superior, diferentes tipos de células apresentaram uma caracterização específica de PDEs, sugerindo uma subpopulação de células neste gânglio com funções fisiológicas distintas; 4) Embora todas as isoformas de PDE4 e PDE3 estivessem presentes no gânglio, a PDE3a, PDE4b e a PDE4d foram as isoformas mais expressas. Por outro lado, incubações de gânglio cervical superior, em diferentes percentagens de oxigénio, não alteraram (não regularam) significativamente a expressão das diferentes isoformas de PDE neste órgão; 5) a sAC encontra-se expressa e funcional no CB e nos quimiorecetores centrais estudados (locus coeruleus, rafe e medula ventrolateral). A sAC apresenta maior expressão no CB comparativamente aos restantes orgãos estudados, exceptuando os testículos, orgão controlo. Variações de HCO3/CO2 de 0/0 para 24/5 aumentaram os níveis de cAMP no CB e quimiorecetores centrais, tendo sido o aumento mais significativo observado no CB. Concentrações acima dos 24mM HCO3/5%CO2 não induziram alterações nos níveis de cAMP, sugerindo que a actividade da sAC se encontra saturada em condições fisiológicas (normocapnia) e que este enzima não desempenha qualquer papel na deteção de situações de hipercapnia; 6) No CB, a expressão das isoformas tmAC1, tmAC4, tmAC6 e tmAC9 é mais elevada comparativamente à expressão da sAC; 7) Utilizamos diferentes inibidores da tmAC (MDL 12-330A, 500μM, 2’5’-ddADO, 30-300μM, SQ 22536, 200μM) e da sAC (KH7, 10-100μM) para estudar a contribuição relativa destes enzimas na acumulação do cAMP no CB. Tanto a tmAC como a sAC contribuem para a acumulação dos níveis de cAMP em condições de hipercapnia. Contudo, existe um maior efeito destes inibidores nas condições de 12 mM HCO3/2.5%CO2 do que em condições de normocapnia e hipercapnia, sugerindo um papel relevante destes enzimas na atividade do CB em situações de hipocapnia; 8) Não se observaram variações nos níveis de cAMP em resposta a diferentes concentrações de HCO3/CO2 ao longo do tempo (5-30 min). O efeito inibitório induzido por ddADO e KH7 foi sobreponível após 5 ou 30 minutos de incubação em todas as concentrações de HCO3/CO2 estudadas; 9) Por último, verificou-se um aumento na frequência da descarga do nervo do seio carotídeo entre as condições de normocapnia e hipercapnia acídica. Ao contrário do KH7 (10μM), o 2’5’-ddADO reduziu significativamente a frequência de descarga do nervo, quer em condições de normocapnia quer de hipercapnia acídica. Contudo, não se verificou aumento na frequência de descarga do nervo entre normocapnia e hipercapnia isohídrica, sugerindo que a sensibilidade à hipercapnia no CB é mediada por variações de pH. Em conclusão, os resultados decorrentes deste trabalho permitiram demonstrar que, embora os enzimas que medeiam a via de sinalização do cAMP possam ser bons alvos terapêuticos em condições particulares, a sua actividade não é específica para o CB. Os resultados sugerem ainda que o cAMP não é um mediador específico da transdução à hipercapnia neste orgão. Contudo, os nossos resultados demonstraram que os níveis de cAMP são mais elevados em condições fisiológicas, o que sugere que o cAMP possa ter uma função homeostática neste orgão. Por último, o presente trabalho demonstrou que os aumentos de cAMP descritos por outros em condições de hipercapnia, não são observáveis quando o pH se encontra controlado. ------------------ ABSTRACT: The work presented in this dissertation was aimed to establish how specific is cAMP-signaling pathways in the CB mainly in different CO2 conditions and how O2 concentrations alter/drives the manipulation of cAMP signaling in the CB. The experimental studies included in this thesis sought to investigate the role of cAMP in the rat CB chemotransduction mechanisms and to determine whether the enzymes that participate in cAMP signal transduction in the CB are regulated by O2/CO2. We characterized the enzymes involved in the cAMP-signaling pathway in the CB (sAC, tmAC, PDE) under different O2/CO2 conditions. Our results demonstrated that many of these enzymes are involved in CO2/O2 sensing and while they may be useful in treating conditions with alterations in CO2/O2 sensing,they will not be specific to chemoreception within the CB: 1) PDE4 is ubiquitously expressed in CB and non-chemoreceptor related tissues and their affinity to inhibitors change with O2 tensions in both CB and carotid arteries, and 2) sAC and tmAC are expressed in peripheral and central chemo- and non-chemoreceptor tissues and their effect on cAMP levels do not change between normocapnic and isohydric hypercapnic conditions. Our results provide evidence against a specific role of cAMP as a mediator for O2 and CO2 chemotransduction in the rat CB and emphasized the role of pH in CO2 sensitivity of the CB. Furthermore, our results demonstrate that cAMP levels are maintained higher under physiological conditions, supporting recent finding from our lab, which all together suggests that cAMP has a homeostatic function in this organ.

Light harvesting in solar cells using natural pigments from red fruits adsorbed to mesoporous TiO2

Nature has developed strategies to present us with a wide variety of colours, from the green of leaves to the bright colours seen in flowers. Anthocyanins are between these natural pigments that are responsible for the great diversity of colours seen in flowers and fruits. Anthocyanins have been used to sensitize titanium dioxide (TiO2) in Dye-Sensitized Solar Cells (DSSCs). DSSCs have become one of the most popular research topic in photovoltaic cells due to their low production costs when compared to other alternatives. DSSCs are inspired in what happens in nature during photosynthesis. A primary charge separation is achieved by means of a photoexcited dye capable of performing the electron injection into the conduction band of a wide band-gap semiconductor, usually TiO2. With this work we aimed to synthesize a novel mesoporous TiO2 structure as the semiconductor in order to increase the dye loading. We used natural occurring dyes such as anthocyanins and their synthetic flavylium relatives, as an alternative to the widely used metal complexes of Ru(II) which are expensive and are environmentally unsafe. This offers not only the chance to use safer dyes for DSSCs, but also to take profit of waste biological products, such as wine and olive oil production residues that are heavily loaded with anthocyanin dyes. We also performed a photodegradation study using TiO2 as the catalyst to degrade dye contaminants, such as those from the wine production waste, by photo-irradiation of the system in the visible region of the light spectrum. We were able to succeed in the synthesis of mesoporous TiO2 both powder and thin film, with a high capacity to load a large amount of dye. We proved the concept of photodegradation using TiO2 as catalyst. And finally, we show that wine production waste is a possible dye source to DSSCs application.

Risk assessment in a research laboratory during sol–gel synthesis of nano-TiO2

The occupational risks in the nanotechnology research laboratories are an important topic since a great number of researchers are involved in this area. The risk assessment performed by both qualitative and quantitative methods is a necessary step for the management of the occupational risks. Risk assessment could be performed by qualitative methods that gather consensus in the scientific community. It is also possible to use quantitative methods, based in different technics and metrics, as indicative exposure limits are been settled by several institutions. While performing the risk assessment, the information on the materials used is very important and, if it is not updated, it could create a bias in the assessment results. The exposure to TiO2 nanoparticles risk was assessed in a research laboratory using a quantitative exposure method and qualitative risk assessment methods. It was found the results from direct-reading Condensation Particle Counter (CPC) equipment and the CB Nanotool seem to be related and aligned, while the results obtained from the use of the Stoffenmanager Nano seem to indicate a higher risk level.

Evolution of the surface plasmon resonance of Au:TiO2 nanocomposite thin films with annealing temperature

This paper reports on the changes in the structural and morphological features occurring in a particular type of nanocomposite thin-film system, composed of Au nanoparticles (NPs) dispersed in a host TiO2 dielectric matrix. The structural and morphological changes, promoted by in-vacuum annealing experiments of the as-deposited thin films at different temperatures (ranging from 200 to 800 C), resulted in a well-known localized surface plasmon resonance (LSPR) phenomenon, which gave rise to a set of different optical responses that can be tailored for a wide number of applications, including those for optical-based sensors. The results show that the annealing experiments enabled a gradual increase of the mean grain size of the Au NPs (from 2 to 23 nm), and changes in their distributions and separations within the dielectric matrix. For higher annealing temperatures of the as-deposited films, a broad size distribution of Au NPs was found (sizes up to 100 nm). The structural conditions necessary to produce LSPR activity were found to occur for annealing experiments above 300 C, which corresponded to the crystallization of the gold NPs, with an average size strongly dependent on the annealing temperature itself. The main factor for the promotion of LSPR was the growth of gold NPs and their redistribution throughout the host matrix. On the other hand, the host matrix started to crystallize at an annealing temperature of about 500 C, which is an important parameter to explain the shift of the LSPR peak position to longer wavelengths, i.e. a red-shift.

Effect of surface plasmon resonance in TiO2/Au thin films on the fluorescence of self-assembled CdTe QDs structure

The exceptional properties of localised surface plasmons (LSPs), such as local field enhancement and confinement effects, resonant behavior, make them ideal candidates to control the emission of luminescent nanoparticles. In the present work, we investigated the LSP effect on the steady-state and time-resolved emission properties of quantum dots (QDs) by organizing the dots into self-assembled dendrite structures deposited on plasmonic nanostructures. Self-assembled structures consisting of water-soluble CdTe mono-size QDs, were developed on the surface of co-sputtered TiO2 thin films doped with Au nanoparticles (NPs) annealed at different temperatures. Their steady-state fluorescence properties were probed by scanning the spatially resolved emission spectra and the energy transfer processes were investigated by the fluorescence lifetime imaging (FLIM) microscopy. Our results indicate that a resonant coupling between excitons confined in QDs and LSPs in Au NPs located beneath the self-assembled structure indeed takes place and results in (i) a shift of the ground state luminescence towards higher energies and onset of emission from excited states in QDs, and (ii) a decrease of the ground state exciton lifetime (fluorescence quenching).

A crosta laterítica ferro-titanífera da Vila Nova Colina e a lateritização no sul de Roraima

RESUMOCrostas lateríticas desenvolvidas sobre as rochas do embasamento do Escudo das Guianas (p.e. granitos da Suíte Intrusiva Água Branca) são reconhecidas na região de Vila Nova Colina, localizada ao sul do estado de Roraima. Os objetivos deste trabalho foram estudar as características minerais e geoquímicas dessas crostas lateríticas e avaliar a relação entre elas e as rochas da região, a fim de entender a evolução da lateritização e fornecer informações sobre seu potencial econômico. Este estudo compreende dados de petrografia, mineralogia e litogeoquímica de granitos, quartzo-hornblenda gabro e crostas lateríticas formadas a partir dessas rochas. Os granitos e o quartzo-hornblenda gabro desenvolveram, respectivamente, um tipo específico de crosta laterítica: (i) vermiforme ferruginosa com elevados teores de caulinita, goethita, hematita, magnetita e anatásio e maior concentração de Al2O3, Sc, Th, e Zr e, (ii) maciça ferro-titanífera com altos teores de magnetita, hematita, maghemita, goethita, caulinita, anatásio, gibbsita e ilmenita e de Fe2O3, TiO2, V e Cu. Cada tipo de crosta indica o efeito da lateritização na porção sul de Roraima e sua posição topográfica. O posicionamento topográfico mais elevado da crosta maciça (220 m) e sua composição mineralógica e geoquímica, indicam sua maturidade (isto é, precisou de mais tempo para ser formada) e, portanto relicto de uma fase erosiva na região, provavelmente associada a subsidência da bacia do Tacutu no Mioceno. Enquanto a crosta vermiforme em uma posição mais rebaixada (140 m) sem gibbsita, sugere que ela é mais jovem que a maciça e representa a lateritização imatura do Plio-Pleistoceno.

Optical properties of zirconium oxynitride films: the effect of composition, electronic and crystalline structures

tThis work is devoted to the investigation of zirconium oxynitride (ZrOxNy) films with varied opticalresponses prompted by the variations in their compositional and structural properties. The films wereprepared by dc reactive magnetron sputtering of Zr, using Ar and a reactive gas mixture of N2+ O2(17:3).The colour of the films changed from metallic-like, very bright yellow-pale and golden yellow, for low gasflows to red-brownish for intermediate gas flows. Associated to this colour change there was a significantdecrease of brightness. With further increase of the reactive gas flow, the colour of the samples changedfrom red-brownish to dark blue or even to interference colourations. The variations in composition dis-closed the existence of four different zones, which were found to be closely related with the variationsin the crystalline structure. XRD analysis revealed the change from a B1 NaCl face-centred cubic zirco-nium nitride-type phase for films prepared with low reactive gas flows, towards a poorly crystallizedover-stoichiometric nitride phase, which may be similar to that of Zr3N4with some probable oxygeninclusions within nitrogen positions, for films prepared with intermediate reactive gas flows. For highreactive gas flows, the films developed an oxynitride-type phase, similar to that of -Zr2ON2with someoxygen atoms occupying some of the nitrogen positions, evolving to a ZrO2monoclinic type structurewithin the zone where films were prepared with relatively high reactive gas flows. The analysis carriedout by reflected electron energy loss spectroscopy (REELS) revealed a continuous depopulation of thed-band and an opening of an energy gap between the valence band (2p) and the Fermi level close to 5 eV.The ZrN-based coatings (zone I and II) presented intrinsic colourations, with a decrease in brightness anda colour change from bright yellow to golden yellow, red brownish and dark blue. Associated to thesechanges, there was also a shift of the reflectivity minimum to lower energies, with the increase of thenon-metallic content. The samples lying in the two last zones (zone III, oxynitride and zone IV, oxide films)revealed a typical semi-transparent-optical behaviour showing interference-like colourations only dueto the complete depopulation of the d band at the Fermi level. The samples lying in these zones presentedalso an increase of the optical bandgap from 2 to 3.6 eV.

Biological behaviour of thin films consisting of Au nanoparticles dispersed in a TiO2 dielectric matrix

In this work it was studied the possible use of thin films, composed of Au nanoparticles (NPs) embedded in a TiO2 matrix, in biological applications, by evaluating their interaction with a well-known protein, Bovine Serum Albumin (BSA), as well as with microbial cells (Candida albicans). The films were produced by one-step reactive DC magnetron sputtering followed by heat-treatment. The samples revealed a composition of 8.3 at.% of Au and a stoichiometric TiO2 matrix. The annealing promoted grain size increase of the Au NPs from 3 nm (at 300 °C) to 7 nm (at 500 °C) and a progressive crystallization of the TiO2 matrix to anatase. A broad localized surface plasmon resonance (LSPR) absorption band (λ = 580–720 nm) was clearly observed in the sample annealed at 500 °C, being less intense at 300 °C. The biological tests indicated that the BSA adhesion is dependent on surface nanostructure morphology, which in turn depends on the annealing temperature that changed the roughness and wettability of the films. The Au:TiO2 thin films also induced a significant change of the microbial cell membrane integrity, and ultimately the cell viability, which in turn affected the adhesion on its surface. The microstructural changes (structure, grain size and surface morphology) of the Au:TiO2 films promoted by heat-treatment shaped the amount of BSA adhered and affected cell viability.

Thin films composed of Ag nanoclusters dispersed in TiO2: Influence of composition and thermal annealing on the microstructure and physical responses

Noble metal powders containing gold and silver have been used for many centuries, providing different colours in the windows of the medieval cathedrals and in ancient Roman glasses. Nowadays, the interest in nanocomposite materials containing noble nanoparticles embedded in dielectric matrices is related with their potential use for a wide range of advanced technological applications. They have been proposed for environmental and biological sensing, tailoring colour of functional coatings, or for surface enhanced Raman spectroscopy. Most of these applications rely on the so-called localised surface plasmon resonance absorption, which is governed by the type of the noble metal nanoparticles, their distribution, size and shape and as well as of the dielectric characteristics of the host matrix. The aim of this work is to study the influence of the composition and thermal annealing on the morphological and structural changes of thin films composed of Ag metal clusters embedded in a dielectric TiO2 matrix. Since changes in size, shape and distribution of the clusters are fundamental parameters for tailoring the properties of plasmonic materials, a set of films with different Ag concentrations was prepared. The optical properties and the thermal behaviour of the films were correlated with the structural and morphological changes promoted by annealing. The films were deposited by DC magnetron sputtering and in order to promote the clustering of the Ag nanoparticles the as-deposited samples were subjected to an in-air annealing protocol. It was demonstrated that the clustering of metallic Ag affects the optical response spectrum and the thermal behaviour of the films.

Microstructural evolution of Au/TiO2 nanocomposite films: The influence of Au concentration and thermal annealing

Nanocomposite thin films consisting of a dielectric matrix, such as titanium oxide (TiO2), with embedded gold (Au) nanoparticles were prepared and will be analysed and discussed in detail in the present work. The evolution of morphological and structural features was studied for a wide range of Au concentrations and for annealing treatments in air, for temperatures ranging from 200 to 800 °C. Major findings revealed that for low Au atomic concentrations (at.%), there are only traces of clustering, and just for relatively high annealing temperatures, T ≥ 500 °C. Furthermore, the number of Au nanoparticles is extremely low, even for the highest annealing temperature, T = 800 °C. It is noteworthy that the TiO2 matrix also crystallizes in the anatase phase for annealing temperatures above 300 °C. For intermediate Au contents (5 at.% ≤ CAu ≤ 15 at.%), the formation of gold nanoclusters was much more evident, beginning at lower annealing temperatures (T ≥ 200 °C) with sizes ranging from 2 to 25 nm as the temperature increased. A change in the matrix crystallization from anatase to rutile was also observed in this intermediate range of compositions. For the highest Au concentrations (> 20 at.%), the films tended to form relatively larger clusters, with sizes above 20 nm (for T ≥ 400 °C). It is demonstrated that the structural and morphological characteristics of the films are strongly affected by the annealing temperature, as well as by the particular amounts, size and distribution of the Au nanoparticles dispersed in the TiO2 matrix.

An experimental investigation on nano-TiO2 and fly ash based high performance concrete

High performance concrete (HPC) offers several advantages over normal-strength concrete, namely, high mechanical strength and high durability. Therefore, HPC allows for concrete structures with less steel reinforcement and a longer service life, both of which are crucial issues in the eco-efficiency of construction materials. Nevertheless international publications on the field of concrete containing nanoparticles are scarce when compared to Portland cement concrete (around 1%) of the total international publications. HPC nanoparticle-based publications are even scarcer. This article presents the results of an experimental investigation on the mechanical properties and durability of HPC based on nano-TiO2 and fly ash. The durability performance was assessed by means of water absorption by immersion, water absorption by capillarity, ultrasonic pulse velocity, electric resistivity, chloride diffusion and resistance to sulphuric acid attack. The results show that the concretes containing an increased content of nano-TiO2 show decreased durability performance. The results also show that concrete with 1% nano-TiO2 and 30% fly ash as Portland cement replacement show a high mechanical strength (C55/C67) and a high durability. However, it should be noted that the cost of nano-TiO2 is responsible for a severe increase in the cost of concrete mixtures.