Origination of an X-linked testes chimeric gene by illegitimate recombination in Drosophila

The formation of chimeric gene structures provides important routes by which novel proteins and functions are introduced into genomes. Signatures of these events have been identified in organisms from wide phylogenic distributions. However, the ability to

Effect of butachlor on spermatogenesis, testosterone amount and testes tissue Rutilus frisii kutum Kamenskii 1901

Morphological assessment of sexually mature Rutilus frisii kutum Kamenskii 1901 caught from the rivers (Shirud, Khoshkrud, Sepidrud and Chelavand Rivers) flowing in the southwest Caspian Sea region was conducted and sperm volume, total sperm count and sperm concentration of abnormal sperms were determined after exposing the spawners to 60% herbicide butachlor (machete). Spawners under study were maintained in tanks (1000 l) at the Shahid Ansari Teleost Fish Hatchery and exposed to two different concentrations (25% and 75% of its LC50 value) of butachlor. Results obtained indicate that exposure to high butachlor toxicity (75% of its LC50 value) decreased sperm volume to 0.61 ± 0.42 cc in 2-3 year old fishes and to 0.55 ± 0.42 cc in fishes above 3 years of age, while that in fish exposed to low butachlor toxicity (25% of its LC50 value) decreased to 1.55 ± 0.42 cc in 2-3 year old fishes and to 1.28 ± 0.42 cc in fishes above 3 years of age. The sperm volume under normal conditions in R. frisii kutum is 4.6 ± 0.42 cc in 2-3 year olds and 4.58 ± 0.42 cc in fishes above 3 years of age. The total sperm count in R. frisii kutum is 39.74 ± 2.5 billion spermatozoa/cc in 2-3 year olds and 42.99 ± 2.5 billion spermatozoa/cc in fishes above 3 years of age. When exposed to high butachlor toxicity, total sperm count dropped to 16.92 ± 2.5 billion spermatozoa/cc in 2-3 year olds and to 15.98 ± 2.5 billion spermatozoa/cc in fishes above 3 years of age. Similarly total sperm count in R. frisii kutum exposed to low butachlor toxicity was recorded as 23.6 ± 2.5 billion spermatozoa/cc in 2-3 year olds and 29.4 ± 2.5 billion spermatozoa/cc in fishes above 3 years of age. Under normal conditions, on the basis of morphology, spermatozoa showed only 10 ± 1.92% of abnormal sperms. The number of abnormal sperms increased by 28.6 ± 1.92% in fishes exposed to high butachlor toxicity, while that in fishes exposed to low butachlor toxicity increased by 19.7 ± 1.92% in 2-3 year olds and 16.6 ± 19.2% in fishes above 3 years of age. It is evident from the results obtained that increase in level of pollution caused a decrease in sperm volume but an increase in the percentage of abnormal sperms. Results obtained indicate that exposure to high butachlor toxicity (75% of its LC50 value) decreased testostron hormone to 0.31 ± 0.22 ng/ml in high butachlor toxicity, and to 0.45 ± 0.22 ng/ml in low butachlor toxicity (25% of its LC50 value). Testostron hormone dropped to 0.53 ± 0.22 ng/ml in 2-3 year olds and to 0.79 ± 0.22ng/ in fishes above 3 years of age. The testostron hormone under normal conditions in R. frisii kutum is 2.7 ± 0.22 ng/ml. It is evident from the results obtained that increase in level of pollution caused a decrease in testostron hormone

Photo thermal induced effects on testes and pituitary gonadotropic cells during resting phase of reproductive cycle in a murrel, Channa punctatus (Bloch)

Effects of various combinations of photoperiod and temperature (NL-NT, LD 15:9-28°C, NL-28°C and LD 15:9 NT) were studied on testicular activity and pituitary gonadotropic cells in Channa punctatus during resting phase of reproductive cycle. Long photoperiod (LD 15:9-28°C) and warm temperature (NL-28°C) regimes were found to be more effective for testicular maturation and secretory activity of gonadotropic cells suggesting testicular maturation via brain-pituitary-testicular axis.

Vulcanization of polybutadiene latex induced by Co-60 gamma radiation

Polybutadiene latex (PBL) vulcanization induced by Co-60 radiation and the influence of dose on crosslinking were investigated. Morphology and particle size distribution were examined by AFM and a particle size analyzer. The casting films were characterized for their swelling and mechanical properties as a function of dose.

Effect of annealing on the deformation mechanism of a styrene/n-butyl acrylate copolymer latex film investigated by synchrotron small-angle X-ray scattering

The deformation mechanism of a styrene/n-butyl acrylate copolymer latex film subjected to uniaxial tensile stress was studied by small-angle X-ray scattering. The influence of annealing at 23, 60, 80, and 100 degrees C for 4 h on microscopic deformation processes was elucidated. It was demonstrated that the microscopic deformation mechanism of the latex films transformed gradually from nonaffine deformation behavior to affine deformation behavior with increasing annealing temperature.

In Situ Observation of Tensile Deformation Processes of Soft Colloidal Crystalline Latex Fibers

The deformation mechanism or styrene/n-butyl acrylate copolymer latex films with fiber symmetric crystalline structure subjected to uniaxial stretching was studied using synchrotron small-angle X-ray scattering technique. The fibers were drawn at angles or 0, 35, and 55 degrees with respect to the Fiber axis. In all cases, the microscopic deformation within the crystallites was Found to deviate from affine deformation behavior with respect to the macroscopic deformation ratio. Moreover, the extent of this deviation is different in the three cases. This peculiar behavior can be attributed to the relative orientation of the (111) plane of the crystals, the plane of densest packing, with respect to the stretching direction in each case. When the stretching direction coincides with the crystallographic (111) plane, which is the case for stretching directions of 0 and 55 degrees with respect to the fiber axis, the microscopic deformation deviates less from affine behavior than when the stretching direction is arbitrarily oriented with respect to the crystallographic (111) plan.

GIUSAXS and AFM Studies on Surface Reconstruction of Latex Thin Films during Thermal Treatment

The structural evolution of a single-layer latex film during annealing was studied via grazing incidence ultrasmall-angle X-ray scattering (GIUSAXS) and atomic force microscopy (AFM). The latex particles were composed of a low-T-g (-54 degrees C) core (n-butylacrylate, 30 wt %) and a high-T-g (41 degrees C) shell (t-butylacrylate, 70 wt %) and had an overall diameter of about 500 nm. GIUSAXS data indicate that the q(y) scan at q(z) = 0.27 nm(-1) (out-of-plane scan) contains information about both the structure factor and the form factor. The GIUSAXS data on latex films annealed at various temperatures ranging from room temperature to 140 degrees C indicate that the structure of the latex thin film beneath the surface changed significantly. The evolution of the out-of-plane scan plot reveals the surface reconstruction of the film. Furthermore, we also followed the time-dependent behavior of structural evolution when the latex film was annealed at a relatively low temperature (60 degrees C) where restructuring within the film can be followed that cannot be detected by AFM, which detects only surface morphology.

DEFORMATION OF SOFT COLLOIDAL CRYSTALLINE STRUCTURE - THEORETICAL CONSIDERATIONS AND EXPERIMENTAL EVIDENCES BY SYNCHROTRON SMALL-ANGLE X-RAY SCATTERING ON TENSILE STRETCHED POLYMERIC LATEX FILM

Films obtained via drying a polymeric latex dispersion are normally colloidal crystalline where latex particles are packed into a face centered cubic (fcc) structure. Different from conventional atomic crystallites or hard sphere colloidal crystallites, the crystalline structure of these films is normally deformable due to the low glass transition temperature of the latex particles. Upon tensile deformation, depending on the drawing direction with respect to the normal of specific crystallographic plane, one observes different crystalline structural changes. Three typical situations where crystallographic c-axis, body diagonal or face diagonal of the fcc structure of the colloidal crystallites being parallel to the stretching direction were investigated.

Preparation of poly(acrylamide-co-acrylic acid) aqueous latex dispersions using anionic polyelectrolyte as stabilizer

High-solids, low-viscosity, stable poly(acrylamide-co-acrylic acid) aqueous latex dispersions were prepared by the dispersion polymerization of acrylamide (AM) and acrylic acid (AA) in an aqueous solution of ammonium sulfate (AS) medium using anionic polyelectrolytes as stabilizers. The anionic polyelectrolytes employed include poly(2-acrylamido-2-methylpropanesulfonic acid sodium) (PAMPSNa) homopolymer and random copolymers of 2-acrylamido-2-methylpropanesulfonic acid sodium (AMPSNa) with methacrylic acid sodium (MAANa), acrylic acid sodium (AANa) or acrylamide (AM). The influences of stabilizer's structure, composition, molecular weight and concentration, AA/AM molar feed ratio, total monomer, initiator and aqueous solution of AS concentration, and stirring speed on the monomer conversion, the particle size and distribution, the bulk viscosity and stability of the dispersions, and the intrinsic viscosity of the resulting copolymer were systematically investigated. Polydisperse spherical as well as ellipsoidal particles were formed in the system. The broad particle size distributions indicated that coalescence of the particles takes place to a greater extent.

Non-affine structural evolution of soft colloidal crystalline latex films under stretching as observed via synchrotron X-ray scattering

A polymer dispersion consisting of soft latex spheres with a diameter of 135 nm was used to produce a crystalline film with face-centered cubic (fcc) packing of the spheres. Different from conventional small-molecule and hardsphere colloidal crystals, the crystalline latex film in the present case is soft (i.e., easily deformable). The structural evolution of this soft colloidal latex film under stretching was investigated by in-situ synchrotron ultra-small-angle X-ray scattering. The film exhibits polycrystalline scattering behavior corresponding to fcc structure. Stretching results not only in a large deformation of the crystallographic structure but also in considerable nonaffine deformation at high draw ratios. The unexpected nonaffine deformation was attributed to slippage between rows of particles and crystalline grain boundaries. The crystalline structure remains intact even at high deformation, suggesting that directional anisotropic colloidal crystallites can be easily produced.

Effect of the core-shell latex polymer content on the compatibility, morphology and mechanical properties of PC/PBA-cs-PMMA blends

The toughening effect of the content of a core-shell poly(butyl acrylate)/poly(methyl methacrylate) latex polymer (PBA-cs-PMMA) on the mechanical properties, morphology and compatibility of its blends with polycarbonate(PC), i.e., PC/PBA-cs-PMMa, was studied. The mechanical properties of the blends are strongly affected by varying the content of PBA-cs-PMMA in the blend. When the PBA-cs-PMMA content is only 5 wt.-%, the impact strength of PC/PBA-cs-PMMA is almost 19 times as high as that of pure PC, indicating that PBA-cs-PMMA is a very good impact modifier for PC. With increasing interphacial layer thickness and decreasing interphacial tension, the interphacial activity becomes more and more effective and, at the same time, miscibility increases too.

Study of the blends containing core-shell latex polymer

Polycarbonate (PC) and a core-shell latex polymer composed of poly(butyl acrylate) and poly(methyl methacrylate) (PBA-cs-PMMA) as core and shell, respectively, were mixed using a Brabender-like apparatus under different conditions. The mechanical properties, the morphology and the processability of the blends were investigated. Because of the good compatibility of PC and PMMA, even dispersion of PBA-cs-PMMA in PC matrix and good adhesion between the components have been achieved. PBA-cs-PMMA is thus a very good impact modifier for PC. The toughening mechanism is both cavitation and shear yielding, as indicated by SEM observation. (C) 1997 Elsevier Science Ltd.

Fixação de nitrogênio pela soja em sistemas de cultivo contínuo e rotacionado com pecuária nos Cerrados.

Quantificou-se a contribuição da fixação biológica de N2 (FBN) na cultura da soja em um Latossolo Vermelho-Escuro, utilizando-se a técnica da abundância natural do isótopo 15N. Foram estudados cinco tratamentos: 1) soja de primeiro ano em solo cultivado por quatro anos com Brachiaria decumbens, sob pastejo, e preparado mecanicamente (arado, grade pesada e niveladora); 2) mesmas condições anteriores, mas com plantio direto da soja; 3) soja em cultivo contínuo por cinco anos, como cultura de verão, sem plantio de milheto no outono/ inverno, e solo preparado de forma convencional (arado, grade pesada e niveladora); 4) soja com cultivo contínuo por cinco anos, com cultivo de outono/inverno de milheto (Pennisetum atropurpureum) e preparo de solo conservacionista (arado de disco, aiveca e subsolador); 5) mesmas condições anteriores, mas com plantio direto. Amostras de plantas foram coletadas no estádio vegetativo, enchimento de grãos, na maturação, e na colheita final de grãos. Em cada coleta analisaram-se as produções de matéria seca (MS) e teores de N e 15N. As produções de MS e N total acumulado foram semelhantes no estádio vegetativo, mas as plantas no plantio direto mostraram taxas de FBN acima de 50%, enquanto que as de plantio convencional estavam abaixo de 40%. No enchimento de grãos, as produções de MS, N total e as taxas de FBN(entre 60% e 68%) foram semelhantes em todos os sistemas de preparo do solo. Na maturação dos grãos, o preparo de solo convencional resultou numa maior produção de MS do que no plantio direto. Os grãos apresentaram a maior parte do N fixado (66% a 82%), ficando entre 51% e 68% para a parte aérea e entre 15% e 32% para as raízes. No balanço do N total obtido por FBN e o que foi alocado aos grãos, obtiveram-se valores indicativos de que a maior parte do N fixado seria retirada do sistema na colheita de grãos, o que foi confirmado na colheita final. A soja de plantio direto mostrou um balanço ligeiramente mais positivo do que a soja de plantio convencional. Como a soja é pouco dependente do N do solo, usando eficientemente o N de fixação, este seria poupado como resíduo para uso de culturas subseqüentes, o que explicaria o efeito benéfico imediato observado na prática em sistemas produtivos de rotação de cultura entre soja e cereais ou pastagem. No entanto, os resultados obtidos indicam que a soja, que tem um índice de colheita alto (proporção do N total nos grãos em relação ao N total da planta), não contribui significativamente para aumento dos teores de N total do solo capazes de beneficiar por longo tempo as culturas em sucessão.

Efeito do lodo de esgoto no crescimento e fixação simbiótica do N2 em feijoeiro (Phaseolus vulgaris L.).

Avaliou-se o efeito do lodo de esgoto, como fonte de N, no crescimento do feijoeiro e na eficiência da simbiose com estirpes nativas e selecionadas de rizóbio. O experimento foi conduzido em casa de vegetação, em um Latossolo Vermelho distroférrico, com os seguintes tratamentos: ausência de adubos químicos e de lodo, adubação química completa, doses 1, 2 e 3 de lodo de esgoto, feijão inoculado com estirpes eficientes de rizóbio + adubação nitrogenada no plantio, feijão inoculado + dose 1 de lodo , feijão inoculado + dose 2 de lodo e feijão inoculado + dose 3 de lodo. A dose 1 (14,8 t ha-1, na base seca) forneceu a metade do N mineral recomendado para a cultura do feijão , a dose 2 (29,6 t ha-1, na base seca) e a 3 (59,2 t ha-1, na base seca) forneceram, respectivamente, a quantidade de N mineral recomendada e duas vezes essa quantidade. Os maiores valores da atividade de redução do acetileno nos tratamentos com as doses 1 e 2 de lodo, em plantas que não foram inoculadas, demonstraram que a aplicação do lodo de esgoto pode aumentar a eficiência dos rizóbios nativos, quando comparados às bactérias oriundas do inoculante. Também demonstrou-se que a aplicação de fertilizante nitrogenado no feijoeiro pode ser substituída por quantidade adequada de lodo de esgoto.