Technological characterization of phosphate ore types from the Salitre Alkaline Complex, MG - Fosfertil Area

The present study was carried out on six different ore types from the Salitre Alkaline Complex aiming to determine their mineralogical composition and the major features that are relevant in the mineral processing. The P(2)O(5) grades vary from 9 to 25%. The slime content (-0, 020 mm) varies between 20 and 34% (w/w) and carries 17-22% of the P(2)O(5) content. The samples essentially consist of apatite, iron oxi-hydroxides, ilmenite, clay minerals, carbonate, quartz, pyroxene, perovskite, secondary phosphates and other minor accessory minerals. Below 0.21 mm, apatite essentially occurs in free particles showing a clean surface or a weak coating of it-on oxi-hydroxides; the highly covered apatite (not recoverable by flotation) varies from 6 to 9%. In the deslimed fraction (above 0.020 mm) more than 97% of the total phosphor content occurs as apatite; the estimated P 2 0 5 potential recovery in flotation concentration is over 90% (71-76% overall recovery).

X ray densitometry applied to technological evaluation of MDF panels of eucalyptus

MDF panels from eucalyptus wood fibers were manufactured in laboratory and industrial production and had their apparent density profile determined by X-ray densitometry. The MDF panels apparent density parameters (maximum density of the superior and inferior faces; medium and minimum density) were determined and compared. The results indicated that the density values of the MDF panels made in the laboratory and in industrial line did not show significant statistical differences, indicating the similarities in the pressing phase of the fibers of both kinds. However, for MDF panels of laboratory and production line, the values of maximum, mean and minimum densities showed statistically significant correlations. The determination of the density profile for MDF panels by X-ray densitometry is important for the evaluation of pressing phase and other variables of the industrial process of production, as well for the determination of the technological properties.

Identification of products formed by a fructan:fructan fructosyltransferase activity from Lolium rigidum

The products formed by a fructan:fructan fructosyltransferase (FFT) activity purified from Lolium rigidum Gaudin were identified after gas chromatography-mass spectrometry of partially methylated alditol acetates, electrospray ionization-mass spectrometry and reversed-phase high-performance liquid chromatography. The FFT activity synthesized oligofructans up to degree of polymerization (DP) 6, but did not synthesize fructans of DP > 6 even when assayed with (1,1,1)-kestopentaose for up to 10 h. The FFT activity when assayed with 1-kestose or 6(G)-kestose synthesized fructan with fructosyl residues almost exclusively linked by beta-2,1-glycosidic linkages. When assayed with 1-kestose, the FFT activity synthesized tetrasaccharides and pentasaccharides with an internal glucosyl residue. The predominant tetrasaccharide was (1&6(G))-kestotetraose and the predominant pentasaccharide was (1&6(G),1)-kestopentaose. By comparison, tetrasaccharides and pentasaccharides extracted from L. rigidum also contained predominantly beta-2,1-glycosidic linked fructans with an internal glucosyl residue. The only exception was that one of the pentasaccharides contained beta-2,1- and beta-2,6-glycosidic linked fructosyl residues. This pentasaccharide was not synthesized by the FFT activity. The role of this FFT activity in formation of oligofructans in L. rigidum is discussed.

An ecosystem of products and systems for ambient intelligence – the AAL4ALL users perspective

Developed societies are currently facing severe demographic changes: the world is getting older at an unprecedented rate. In 2000, about 420 million people, or approximately 7 percent of the world population, were aged 65 or older. By 2050, that number will be nearly 1.5 billion people, about 16 percent of the world population. This demographic trend will be also followed by an increase of people with physical limitations. New challenges will be raised to the traditional health care systems, not only in Portugal, but also in all other European states. There is an urgent need to find solutions that allow extending the time people can live in their preferred environment by increasing their autonomy, self-confidence and mobility. AAL4ALL presents an idea for an answer through the development of an ecosystem of products and services for Ambient Assisted Living (AAL) associated to a business model and validated through large scale trial. This paper presents the results of the first survey developed within the AAL4ALL project: the users’ survey targeted at the Portuguese seniors and pre-seniors. This paper is, thus, about the lives of the Portuguese population aged 50 and over.

Application of robust fixed point transformations for technological operation of robots

A robot’s drive has to exert appropriate driving forces that can keep its arm and end effector at the proper position, velocity and acceleration, and simultaneously has to compensate for the effects of the contact forces arising between the tool and the workpiece depending on the needs of the actual technological operation. Balancing the effects of a priori unknown external disturbance forces and the inaccuracies of the available dynamic model of the robot is also important. Technological tasks requiring well prescribed end effector trajectories and contact forces simultaneously are challenging control problems that can be tackled in various manners.

The dilution effect: The influence of expertise and abstraction on consumer's judgements of products

A Work Project, presented as part of the requirements for the Award of a Masters Degree in Management from the NOVA – School of Business and Economics

Evaluación de aspectos agronómicos, químicos-nutricionales y tecnológicos de lupinos y quínoas. Agronomic, chemical-nutritional and technological evaluation of lupin and quinoa grain crops.

Este proyecto desarrolla estudios multidisciplinarios para contribuir con información avalada por métodos científicos, a propuestas de desarrollos regionales agronómicos y de tecnología de alimentos en la provincia de Córdoba. Se propone realizar evaluaciones de factibilidad de cultivo de variedades de lupinos y quínoas en parcelas experimentales y huertas, verificar las características químico-nutricionales de los granos y establecer mecanismos tecnológicos, para poder presentar productos alimenticios viables de comercialización. Estos granos, poco conocidos en los hábitos nutricionales actuales, fueron considerados desde la antigüedad por distintas civilizaciones, como importantes fuentes de alimento vegetal. En la actualidad la necesidad de contar con nuevas fuentes de alimentos provenientes de sistemas auto-sustentables y manufacturación artesanal, ha llevado investigar alternativas de nuevos cultivos y a revalorizar aquellos que han sucumbido a las tecnologías modernas. Tanto los granos de quínoa como la de los lupinos han cobrado interés a nivel internacional por su alto valor nutricional, farmacológico y por sus cualidades de plantas rústicas a los manejos de cultivo. Es por esas razones, que se propone desarrollar un proyecto de investigación con transferencia de tecnología, para contar con experiencias que permitan establecer los lineamientos agronómicos y de tecnología de alimentos necesarios para promover los granos de lupinos y quínoas dentro de los planes nutricionales de nuestra sociedad. La importancia de este proyecto se fundamenta en la necesidad de buscar nuevas alternativas de cultivos que se adapten a los recursos de clima y suelo en áreas rurales de las sierras de Córdoba y promover nuevos emprendimientos relacionados con los sectores agrícolas y de la alimentación. Para su mejor desarrollo el proyecto está diagramado en tres módulos que cubren las siguientes áreas: Módulo 1, ensayos de cultivo en parcelas experimentales y huertas comunales; Módulo 2, análisis químicos-nutricionales; Módulo 3, diseño y adaptación de equipamiento para la manufacturación de alimentos. La metodología de investigación está ampliamente respaldada por la experiencia que cuenta el equipo de trabajo en los módulos propuestos y que puede ser verificada en la producción científica plasmada en trabajos publicados en revistas con referato nacionales e internacionales, presentaciones a congresos y direcciones de tesis.

Desarrollo tecnológico de germoplasma a partir de plantas nativas ornamentales: los casos de Glandularia y Solidago. Technological development of native ornamental germoplasm: the cases of Solidago and Glandularia genera.

Un importante número de especies ornamentales que se cultivan en el mundo derivan de germoplasma Sudamericano. El uso de Recursos Genéticos nativos para el desarrollo de plantas ornamentales ha sido escasamente explotado en Argentina, por lo que el país no ha tenido beneficio alguno. El sector depende de variedades desarrolladas en el exterior lo que implica el pago de regalías inclusive para el caso de variedades derivadas de especies nativas argentinas. Las poblaciones naturales (distintas especies de Glandularia, distintos ecotipos de Solidago) presentan, una considerable variabilidad en distintos caracteres vegetativos y reproductivos que les permiten sobrevivir en ambientes con distintas condiciones climáticas, edáficas, bióticas, etc. Es por ello que, a partir de dicha variabilidad existente en las poblaciones naturales, será posible seleccionar individuos con caracteres de alto valor ornamental. Si bien el valor ornamental de los géneros Glandularia y Solidago es reconocido, no se han realizado avances en el conocimiento de su biología floral o su potencialidad para generar variabilidad en el país, aunque se conoce el éxito económico de las variedades comerciales desarrolladas en el exterior. Los objetivos del presente proyecto serán lograr avances en la obtención de variedades ornamentales o clones noveles a partir de especies nativas a través de la selección de genotipos superiores e hibridaciones interespecíficas en Glandularia y la domesticación, caracterización y selección de clones superiores y/o noveles en Solidago. La metodología para lograr dichos objetivos será: recolección de germoplasma en zonas de distribución, identificación taxonómica, domesticación, caracterización y mejoramiento genético clásico. Los resultados obtenidos permitirán determinar la aptitud combinatoria de las especies del género Glandularia, como así también aportar elementos científicos básicos para encarar futuros trabajos de mejoramiento, entre ellos, se deberá poder identificar las barreras a la hibridación interespecífica (pre o post cigóticas). Estos conocimientos resultan básicos e indispensables en el momento de establecer estrategias racionales para la superación de las barreras a la hibridación. En el género Solidago, los resultados obtenidos son permitirán establecer una base genética lo suficientemente amplia como para establecer los lineamientos necesario para el logro de nuevas variedades ornamentales. A partir de este proyecto se podrá disponer de material con distintos grados de desarrollo: colecciones de los géneros Glandularia y Solidago caracterizadas, domesticadas y materiales avanzados en el mejoramiento. Estos productos contribuirán al mayor conocimiento de la flora nativa ornamental, colaborarán con la sustentabilidad del sistema agroecológico, permitirán la formación de recursos humanos, el fortalecimiento del grupo y su integración con el sector productivo.

The Technological Specialization of Countries: An Analysis of Patent Data

New methods of analysis of patent statistics allow assessing country profiles of technological specialization for the period 1990-2006. We witness a modest decrease in levels of specialization, which we show to be negatively influenced by country size and degree of internationalization of inventive activities.

Rice yield estimation based on weather conditions and on technological level of production systems in Brazil

The objective of this work was to evaluate an estimation system for rice yield in Brazil, based on simple agrometeorological models and on the technological level of production systems. This estimation system incorporates the conceptual basis proposed by Doorenbos & Kassam for potential and attainable yields with empirical adjusts for maximum yield and crop sensitivity to water deficit, considering five categories of rice yield. Rice yield was estimated from 2000/2001 to 2007/2008, and compared to IBGE yield data. Regression analyses between model estimates and data from IBGE surveys resulted in significant coefficients of determination, with less dispersion in the South than in the North and Northeast regions of the country. Index of model efficiency (E1') ranged from 0.01 in the lower yield classes to 0.45 in higher ones, and mean absolute error ranged from 58 to 250 kg ha‑1, respectively.

Energetic analysis of landrace varieties and hybrids of corn produced in different technological levels of management

The aim of this study was to analyze, under the energetic point of view, the cultivation of corn in three management systems (low, medium and high-tech), using two landrace varieties ('Argentino' and 'BR da Várzea'), a double hybrid cultivar (SHS 4080) and a simple hybrid (IAC 8333). Five performance indicators were used: energy efficiency, liquid cultural energy, cultural efficiency, energy balance and productive energy efficiency. From the perspective of family farming, it was verified the largest social importance of the systems under low and medium levels of technology, due to the increase employment capacity of rural labor. The liquid cultural energy and energy balance were more favorable for the system under high technological level, unlike cultural efficiency and productive energy efficiency, which were significantly higher for medium and low technological levels. The variety 'Argentino' showed lower productive energy efficiency. The variety 'BR da Várzea', on the other hand, presented the potential to generate energy as much as the hybrids. In general, the biggest sustainability in the corn crop was achieved when the management system under medium and lower levels of technology were used.

Technological development of 40mg furosemide tablets: equivalence and bioavaibility study in dogs

Furosemide (40mg) was administered to 20 street dogs, 10 males and 10 females, in two different pharmaceutical forms: (1) compressed furosemide 40mg formulated at the Federal University of Pernambuco (UFPE-tablet), and (2) a commercial formulation with equal bioequivalence produced by the Laboratory for Pharmaceutical Technology of Pernambuco State (LAFEPE), the LAFEPE-furosemide. The study aimed to evaluate the kinetics of dissolution of the UFPE-tablet in order to analyze the behavior of bioavailability of the best formulation for veterinary use. The plasmatic concentrations of furosemide for the determination of parameters of pharmacological kinetics were analyzed by high-performance liquid chromatographic method (HPLC). The in vitro study accomplished through physiochemical analyses demonstrated that the formulas of the furosemide tablets attained the pharmaceutical requirements in agreement with USP 23 and the Brazilian Pharmacopoeia. The evaluation accomplished in dogs with UFPE-tablets given in only dose demonstrated uniformity in blood levels indicating stability in maintenance of the pharmaceutical formulation and efficiency in absorption of the active compound. These values are not significantly different in relation to the 5% confidence limit. Regarding maximum concentration (Tmax) time and global bioavaibility assessed by AUC means, there were no considerable differences as well. UFPE-furosemide displayed 743.492µg/mL.h as AUC average value whereas LAFEPE-furosemide had an average of 537.284µg/mL.h.

Lactobacillus plantarum AJ2 isolated from naturally fermented sausage and its effects on the technological properties of Milano-type salami

L. plantarum, strain AJ2, was isolated from naturally fermented sausage manufactured in the Southern region of Brazil and inoculated in Milano-type salami. The lactic culture exhibited the ability of growing in the product, decreasing pH in the first seven days of fermentation/maturation and the residual levels of nitrite and nitrate, as well as peroxide and TBARS values. The inoculated sausage had the highest intensity for brightness and red color, but did not present a difference in chemical composition and fatty acid composition, compared to the control.

Effect of adding unconventional raw materials on the technological properties of rice fresh pasta

The aim of this study was to develop fettuccini type rice fresh pasta by cold extrusion. To produce the pasta, a 2² Central Composite Rotational Design was used, in which the effects of the addition of pre-gelatinized rice flour - PGRF (0-60%) and modified egg albumin - MEA (0-10%) were studied. The dependent variables were the results of the cooking test and of the instrumental texture. The optimum cooking time for all of the formulations of rice fresh pasta was 3 minutes. MEA had a greater effect on increasing the weight of the pasta when compared to that of PGRF. It was found that with the addition of PGRF increase in loss of solids in cooking water, whereas MEA exerted the opposite effect on this parameter. Moreover, the maximum value of MEA (10%) had an optimum effect on pasta firmness, while PGRF had a negative effect on this parameter. The maximum values of PGRF and MEA reduced the stickiness of the pasta. Based on these results and on the parameters considered as most important, the rice pasta with the best technological characteristics was that with the maximum levels of MEA (10%) and no addition of PGRF (0%). This product was submitted to sensory and microbiological analyses, with good results.