A new boundary condition solved with B.I.E.M.

Among the classical operators of mathematical physics the Laplacian plays an important role due to the number of different situations that can be modelled by it. Because of this a great effort has been made by mathematicians as well as by engineers to master its properties till the point that nearly everything has been said about them from a qualitative viewpoint. Quantitative results have also been obtained through the use of the new numerical techniques sustained by the computer. Finite element methods and boundary techniques have been successfully applied to engineering problems as can be seen in the technical literature (for instance [ l ] , [2], [3] . Boundary techniques are especially advantageous in those cases in which the main interest is concentrated on what is happening at the boundary. This situation is very usual in potential problems due to the properties of harmonic functions. In this paper we intend to show how a boundary condition different from the classical, but physically sound, is introduced without any violence in the discretization frame of the Boundary Integral Equation Method. The idea will be developed in the context of heat conduction in axisymmetric problems but it is hoped that its extension to other situations is straightforward. After the presentation of the method several examples will show the capabilities of modelling a physical problem.

Consolidation problems

The analysis of deformation in soils is of paramount importance in geotechnical engineering. For a long time the complex behaviour of natural deposits defied the ingenuity of engineers. The time has come that, with the aid of computers, numerical methods will allow the solution of every problem if the material law can be specified with a certain accuracy. Boundary Techniques (B.E.) have recently exploded in a splendid flowering of methods and applications that compare advantegeously with other well-established procedures like the finite element method (F.E.). Its application to soil mechanics problems (Brebbia 1981) has started and will grow in the future. This paper tries to present a simple formulation to a classical problem. In fact, there is already a large amount of application of B.E. to diffusion problems (Rizzo et al, Shaw, Chang et al, Combescure et al, Wrobel et al, Roures et al, Onishi et al) and very recently the first specific application to consolidation problems has been published by Bnishi et al. Here we develop an alternative formulation to that presented in the last reference. Fundamentally the idea is to introduce a finite difference discretization in the time domain in order to use the fundamental solution of a Helmholtz type equation governing the neutral pressure distribution. Although this procedure seems to have been unappreciated in the previous technical literature it is nevertheless effective and straightforward to implement. Indeed for the special problem in study it is perfectly suited, because a step by step interaction between the elastic and flow problems is needed. It allows also the introduction of non-linear elastic properties and time dependent conditions very easily as will be shown and compares well with performances of other approaches.

Metodología de análisis estadístico de roturas en redes de distribución de agua

La presente Tesis plantea una metodología de análisis estadístico de roturas de tubería en redes de distribución de agua, que analiza la relación entre las roturas y la presión de agua y que propone la implantación de una gestión de presiones que reduzca el número de roturas que se producen en dichas redes. Las redes de distribución de agua se deterioran y una de sus graves consecuencias es la aparición de roturas frecuentes en sus tuberías. Las roturas llevan asociados elevados costes sociales, económicos y medioambientales y es por ello por lo que las compañías gestoras del agua tratan de reducirlas en la medida de lo posible. Las redes de distribución de agua se pueden dividir en zonas o sectores que facilitan su control y que pueden ser independientes o aislarse mediante válvulas, como ocurre en las redes de países más desarrollados, o pueden estar intercomunicados hidráulicamente. La implantación de una gestión de presiones suele llevarse a cabo a través de las válvulas reductoras de presión (VPR), que se instalan en las cabeceras de estos sectores y que controlan la presión aguas abajo de la misma, aunque varíe su caudal de entrada. Los métodos más conocidos de la gestión de presiones son la reducción de presiones, que es el control más habitual, el mantenimiento de la presión, la prevención y/o alivio de los aumentos repentinos de presión y el establecimiento de un control por alturas. A partir del año 2005 se empezó a reconocer el efecto de la gestión de presiones sobre la disminución de las roturas. En esta Tesis, se sugiere una gestión de presiones que controle los rangos de los indicadores de la presión de cabecera que más influyan en la probabilidad de roturas de tubería. Así, la presión del agua se caracteriza a través de indicadores obtenidos de la presión registrada en la cabecera de los sectores, debido a que se asume que esta presión es representativa de la presión de operación de todas las tuberías porque las pérdidas de carga son relativamente bajas y las diferencias topográficas se tienen en cuenta en el diseño de los sectores. Y los indicadores de presión, que se pueden definir como el estadístico calculado a partir de las series de la presión de cabecera sobre una ventana de tiempo, pueden proveer la información necesaria para ayudar a la toma de decisiones a los gestores del agua con el fin de reducir las roturas de tubería en las redes de distribución de agua. La primera parte de la metodología que se propone en esta Tesis trata de encontrar los indicadores de presión que influyen más en la probabilidad de roturas de tuberías. Para conocer si un indicador es influyente en la probabilidad de las roturas se comparan las estimaciones de las funciones de distribución acumulada (FDAs) de los indicadores de presiones, considerando dos situaciones: cuando se condicionan a la ocurrencia de una rotura (suceso raro) y cuando se calculan en la situación normal de operación (normal operación). Por lo general, las compañías gestoras cuentan con registros de roturas de los años más recientes y al encontrarse las tuberías enterradas se complica el acceso a la información. Por ello, se propone el uso de funciones de probabilidad que permiten reducir la incertidumbre asociada a los datos registrados. De esta forma, se determinan las funciones de distribución acumuladas (FDAs) de los valores del indicador de la serie de presión (situación normal de operación) y las FDAs de los valores del indicador en el momento de ocurrencia de las roturas (condicionado a las roturas). Si las funciones de distribución provienen de la misma población, no se puede deducir que el indicador claramente influya en la probabilidad de roturas. Sin embargo, si se prueba estadísticamente que las funciones proceden de la misma población, se puede concluir que existe una relación entre el indicador analizado y la ocurrencia de las roturas. Debido a que el número de valores del indicador de la FDA condicionada a las roturas es mucho menor que el número de valores del indicador de la FDA incondicional a las roturas, se generan series aleatorias a partir de los valores de los indicadores con el mismo número de valores que roturas registradas hay. De esta forma, se comparan las FDAs de series aleatorias del indicador con la FDA condicionada a las roturas del mismo indicador y se deduce si el indicador es influyente en la probabilidad de las roturas. Los indicadores de presión pueden depender de unos parámetros. A través de un análisis de sensibilidad y aplicando un test estadístico robusto se determina la situación en la que estos parámetros dan lugar a que el indicador sea más influyente en la probabilidad de las roturas. Al mismo tiempo, los indicadores se pueden calcular en función de dos parámetros de cálculo que se denominan el tiempo de anticipación y el ancho de ventana. El tiempo de anticipación es el tiempo (en horas) entre el final del periodo de computación del indicador de presión y la rotura, y el ancho de ventana es el número de valores de presión que se requieren para calcular el indicador de presión y que es múltiplo de 24 horas debido al comportamiento cíclico diario de la presión. Un análisis de sensibilidad de los parámetros de cálculo explica cuándo los indicadores de presión influyen más en la probabilidad de roturas. En la segunda parte de la metodología se presenta un modelo de diagnóstico bayesiano. Este tipo de modelo forma parte de los modelos estadísticos de prevención de roturas, parten de los datos registrados para establecer patrones de fallo y utilizan el teorema de Bayes para determinar la probabilidad de fallo cuando se condiciona la red a unas determinadas características. Así, a través del teorema de Bayes se comparan la FDA genérica del indicador con la FDA condicionada a las roturas y se determina cuándo la probabilidad de roturas aumenta para ciertos rangos del indicador que se ha inferido como influyente en las roturas. Se determina un ratio de probabilidad (RP) que cuando es superior a la unidad permite distinguir cuándo la probabilidad de roturas incrementa para determinados intervalos del indicador. La primera parte de la metodología se aplica a la red de distribución de la Comunidad de Madrid (España) y a la red de distribución de Ciudad de Panamá (Panamá). Tras el filtrado de datos se deduce que se puede aplicar la metodología en 15 sectores en la Comunidad de Madrid y en dos sectores, llamados corregimientos, en Ciudad de Panamá. Los resultados demuestran que en las dos redes los indicadores más influyentes en la probabilidad de las roturas son el rango de la presión, que supone la diferencia entre la presión máxima y la presión mínima, y la variabilidad de la presión, que considera la propiedad estadística de la desviación típica. Se trata, por tanto, de indicadores que hacen referencia a la dispersión de los datos, a la persistencia de la variación de la presión y que se puede asimilar en resistencia de materiales a la fatiga. La segunda parte de la metodología se ha aplicado a los indicadores influyentes en la probabilidad de las roturas de la Comunidad de Madrid y se ha deducido que la probabilidad de roturas aumenta para valores extremos del indicador del rango de la presión y del indicador de la variabilidad de la presión. Finalmente, se recomienda una gestión de presiones que limite los intervalos de los indicadores influyentes en la probabilidad de roturas que incrementen dicha probabilidad. La metodología propuesta puede aplicarse a otras redes de distribución y puede ayudar a las compañías gestoras a reducir el número de fallos en el sistema a través de la gestión de presiones. This Thesis presents a methodology for the statistical analysis of pipe breaks in water distribution networks. The methodology studies the relationship between pipe breaks and water pressure, and proposes a pressure management procedure to reduce the number of breaks that occur in such networks. One of the manifestations of the deterioration of water supply systems is frequent pipe breaks. System failures are one of the major challenges faced by water utilities, due to their associated social, economic and environmental costs. For all these reasons, water utilities aim at reducing the problem of break occurrence to as great an extent as possible. Water distribution networks can be divided into areas or sectors, which facilitates the control of the network. These areas may be independent or isolated by valves, as it usually happens in developing countries. Alternatively, they can be hydraulically interconnected. The implementation of pressure management strategies is usually carried out through pressure-reducing valves (PRV). These valves are installed at the head of the sectors and, although the inflow may vary significantly, they control the downstream pressure. The most popular methods of pressure management consist of pressure reduction, which is the common form of control, pressure sustaining, prevention and/or alleviation of pressure surges or large variations in pressure, and level/altitude control. From 2005 onwards, the effects of pressure management on burst frequencies have become more widely recognized in the technical literature. This thesis suggests a pressure management that controls the pressure indicator ranges most influential on the probability of pipe breaks. Operating pressure in a sector is characterized by means of a pressure indicator at the head of the DMA, as head losses are relatively small and topographical differences were accounted for at the design stage. The pressure indicator, which may be defined as the calculated statistic from the time series of pressure head over a specific time window, may provide necessary information to help water utilities to make decisions to reduce pipe breaks in water distribution networks. The first part of the methodology presented in this Thesis provides the pressure indicators which have the greatest impact on the probability of pipe breaks to be determined. In order to know whether a pressure indicator influences the probability of pipe breaks, the proposed methodology compares estimates of cumulative distribution functions (CDFs) of a pressure indicator through consideration of two situations: when they are conditioned to the occurrence of a pipe break (a rare event), and when they are not (a normal operation). Water utilities usually have a history of failures limited to recent periods of time, and it is difficult to have access to precise information in an underground network. Therefore, the use of distribution functions to address such imprecision of recorded data is proposed. Cumulative distribution functions (CDFs) derived from the time series of pressure indicators (normal operation) and CDFs of indicator values at times coincident with a reported pipe break (conditioned to breaks) are compared. If all estimated CDFs are drawn from the same population, there is no reason to infer that the studied indicator clearly influences the probability of the rare event. However, when it is statistically proven that the estimated CDFs do not come from the same population, the analysed indicator may have an influence on the occurrence of pipe breaks. Due to the fact that the number of indicator values used to estimate the CDF conditioned to breaks is much lower in comparison with the number of indicator values to estimate the CDF of the unconditional pressure series, and that the obtained results depend on the size of the compared samples, CDFs from random sets of the same size sampled from the unconditional indicator values are estimated. Therefore, the comparison between the estimated CDFs of random sets of the indicator and the estimated CDF conditioned to breaks allows knowledge of if the indicator is influential on the probability of pipe breaks. Pressure indicators depend on various parameters. Sensitivity analysis and a robust statistical test allow determining the indicator for which these parameters result most influential on the probability of pipe breaks. At the same time, indicators can be calculated according to two model parameters, named as the anticipation time and the window width. The anticipation time refers to the time (hours) between the end of the period for the computation of the pressure indicator and the break. The window width is the number of instantaneous pressure values required to calculate the pressure indicator and is multiple of 24 hours, as water pressure has a cyclical behaviour which lasts one day. A sensitivity analysis of the model parameters explains when the pressure indicator is more influential on the probability of pipe breaks. The second part of the methodology presents a Bayesian diagnostic model. This kind of model belongs to the class of statistical predictive models, which are based on historical data, represent break behavior and patterns in water mains, and use the Bayes’ theorem to condition the probability of failure to specific system characteristics. The Bayes’ theorem allows comparing the break-conditioned FDA and the unconditional FDA of the indicators and determining when the probability of pipe breaks increases for certain pressure indicator ranges. A defined probability ratio provides a measure to establish whether the probability of breaks increases for certain ranges of the pressure indicator. The first part of the methodology is applied to the water distribution network of Madrid (Spain) and to the water distribution network of Panama City (Panama). The data filtering method suggests that the methodology can be applied to 15 sectors in Madrid and to two areas in Panama City. The results show that, in both systems, the most influential indicators on the probability of pipe breaks are the pressure range, which is the difference between the maximum pressure and the minimum pressure, and pressure variability, referred to the statistical property of the standard deviation. Therefore, they represent the dispersion of the data, the persistence of the variation in pressure and may be related to the fatigue in material resistance. The second part of the methodology has been applied to the influential indicators on the probability of pipe breaks in the water distribution network of Madrid. The main conclusion is that the probability of pipe breaks increases for the extreme values of the pressure range indicator and of the pressure variability indicator. Finally, a pressure management which limits the ranges of the pressure indicators influential on the probability of pipe breaks that increase such probability is recommended. The methodology presented here is general, may be applied to other water distribution networks, and could help water utilities reduce the number of system failures through pressure management.

State of the Art and Future Trends in Grid Codes Applicable to Isolated Electrical Systems

Isolated electrical systems lack electrical interconnection to other networks and are usually placed in geographically isolated areas—mainly islands or locations in developing countries. Until recently, only diesel generators were able to assure a safe and reliable supply in exchange for very high costs for fuel transportation and system operation. Transmission system operators (TSOs) are increasingly seeking to replace traditional energy models based on large groups of conventional generation units with mixed solutions where diesel groups are held as backup generation and important advantages are provided by renewable energy sources. The grid codes determine the technical requirements to be fulfilled by the generators connected in any electrical network, but regulations applied to isolated grids are more demanding. In technical literature it is rather easy to find and compare grid codes for interconnected electrical systems. However, the existing literature is incomplete and sparse regarding isolated grids. This paper aims to review the current state of isolated systems and grid codes applicable to them, specifying points of comparison and defining the guidelines to be followed by the upcoming regulations.

State of the Art and Future Trends in Grid Codes Applicable to Isolated Electrical Systems

Electrical power systems are changing their traditional structure, which was based on a little number of large generating power plants placed at great distances from loads by new models that tend to split the big production nodes in many smaller ones. The set of small groups which are located close to consumers and provide safe and quality energy is called distributed generation (DG). The proximity of the sources to the loads reduces losses associated with transportation and increases overall system efficiency. DG also favors the inclusion of renewable energy sources in isolated electrical systems or remote microgrids, because they can be installed where the natural resource is located. In both cases, as weak grids unable to get help from other nearby networks, it is essential to ensure appropriate behavior of DG sources to guarantee power system safety and stability. The grid codes sets out the technical requirements to be fulfilled for the sources connected in these electrical networks. In technical literature it is rather easy to find and compare grid codes for interconnected electrical systems. However, the existing literature is incomplete and sparse regarding isolated electrical systems and this happens due to the difficulties inherent in the pursuit of codes. Some countries have developed their own legislation only for their island territory (as Spain or France), others apply the same set of rules as in mainland, another group of island countries have elaborated a complete grid code for all generating sources and some others lack specific regulation. This paper aims to make a complete review of the state of the art in grid codes applicable to isolated systems, setting the comparison between them and defining the guidelines predictably followed by the upcoming regulations in these particular systems.

Utilización de modelos hidráulicos bidimensionales en la determinación del tiempo de concentración

El tiempo de concentración de una cuenca sigue siendo relativamente desconocido para los ingenieros. El procedimiento habitual en un estudio hidrológico es calcularlo según varias fórmulas escogidas entre las existentes para después emplear el valor medio obtenido. De esta media se derivan los demás resultados hidrológicos, resultados que influirán en el futuro dimensionamiento de las infraestructuras. Este trabajo de investigación comenzó con el deseo de conseguir un método más fiable y objetivo que permitiera obtener el tiempo de concentración. Dada la imposibilidad de poner en práctica ensayos hidrológicos en una cuenca física real, ya que no resulta viable monitorizar perfectamente la precipitación ni los caudales de salida, se planteó llevar a cabo los ensayos de forma simulada, con el empleo de modelos hidráulicos bidimensionales de lluvia directa sobre malla 2D de volúmenes finitos. De entre todos los disponibles, se escogió InfoWorks ICM, por su rapidez y facilidad de uso. En una primera fase se efectuó la validación del modelo hidráulico elegido, contrastando los resultados de varias simulaciones con la formulación analítica existente. Posteriormente, se comprobaron los valores de los tiempos de concentración obtenidos con las expresiones referenciadas en la bibliografía, consiguiéndose resultados muy satisfactorios. Una vez verificado, se ejecutaron 690 simulaciones de cuencas tanto naturales como sintéticas, incorporando variaciones de área, pendiente, rugosidad, intensidad y duración de las precipitaciones, a fin de obtener sus tiempos de concentración y retardo. Esta labor se realizó con ayuda de la aceleración del cálculo vectorial que ofrece la tecnología CUDA (Arquitectura Unificada de Dispositivos de Cálculo). Basándose en el análisis dimensional, se agruparon los resultados del tiempo de concentración en monomios adimensionales. Utilizando regresión lineal múltiple, se obtuvo una nueva formulación para el tiempo de concentración. La nueva expresión se contrastó con las formulaciones clásicas, habiéndose obtenido resultados equivalentes. Con la exposición de esta nueva metodología se pretende ayudar al ingeniero en la realización de estudios hidrológicos. Primero porque proporciona datos de manera sencilla y objetiva que se pueden emplear en modelos globales como HEC-HMS. Y segundo porque en sí misma se ha comprobado como una alternativa realmente válida a la metodología hidrológica habitual. Time of concentration remains still fairly imprecise to engineers. A normal hydrological study goes through several formulae, obtaining concentration time as the median value. Most of the remaining hydrologic results will be derived from this value. Those results will determine how future infrastructures will be designed. This research began with the aim to acquire a more reliable and objective method to estimate concentration times. Given the impossibility of carrying out hydrological tests in a real watershed, due to the difficulties related to accurate monitoring of rainfall and derived outflows, a model-based approach was proposed using bidimensional hydraulic simulations of direct rainfall over a 2D finite-volume mesh. Amongst all of the available software packages, InfoWorks ICM was chosen for its speed and ease of use. As a preliminary phase, the selected hydraulic model was validated, checking the outcomes of several simulations over existing analytical formulae. Next, concentration time values were compared to those resulting from expressions referenced in the technical literature. They proved highly satisfactory. Once the model was properly verified, 690 simulations of both natural and synthetic basins were performed, incorporating variations of area, slope, roughness, intensity and duration of rainfall, in order to obtain their concentration and lag times. This job was carried out in a reasonable time lapse with the aid of the parallel computing platform technology CUDA (Compute Unified Device Architecture). Performing dimensional analysis, concentration time results were isolated in dimensionless monomials. Afterwards, a new formulation for the time of concentration was obtained using multiple linear regression. This new expression was checked against classical formulations, obtaining equivalent results. The publication of this new methodology intends to further assist the engineer while carrying out hydrological studies. It is effective to provide global parameters that will feed global models as HEC-HMS on a simple and objective way. It has also been proven as a solid alternative to usual hydrology methodology.

Caracterización estructural de los rellenos situados en el trasdós de bóvedas de edificios históricos

El papel esencial de los rellenos en el comportamiento y la estabilidad de las construcciones de fábrica ha sido sorprendentemente ignorado en la bibliografía técnica, contribuyendo este trabajo a cubrir esta laguna del conocimiento. Se presenta en primer lugar la configuración morfológica de los rellenos del trasdós de bóvedas en la Península Ibérica en tres periodos histórico-técnicos: la construcción romana, la románica y la gótica. La clasificación se ha realizado en base a inspecciones visuales de diferentes edificios. En sendos anexos se presentan análisis comparados de la base de datos que se ha reunido y las fichas de las construcciones consideradas. En segundo lugar se ha caracterizado el papel estructural de los rellenos, identificándose las características intrínsecas que se estiman más significativas de dichos rellenos en relación tanto con su propia configuración como con su función estructural. Muy en particular se proponen unas leyes de empujes coherentes con la naturaleza y con las condiciones de contorno de los rellenos y las bóvedas. En esta tesis se ha desarrollado una sencilla, potente y suficiente herramienta de análisis que considera las principales variables que intervienen en el comportamiento de una estructura de fábrica, incluyendo muy particularmente los rellenos. Para ello se ha planteado una herramienta basada en el análisis límite que incluye la comprobación tensional de los diferentes esfuerzos, normales o tangenciales, así como la interfaz entre bóvedas y rellenos, dotándose a los técnicos de una herramienta que permite entender estas estructuras, de complejo funcionamiento. La herramienta propuesta incluye consideraciones energéticas para encontrar la solución más cercana al funcionamiento real. La herramienta se ha calibrado con ejemplos analizados por otros autores con diferentes procedimientos, poniéndose de manifiesto su suficiente precisión y eficacia, especialmente si se tiene en cuenta que requiere sólo de unos datos mínimos. La calibración se ha extendido al ensayo en modelo reducido de este tipo de estructuras en el Laboratorio de Estructuras de la Escuela de Ingenieros de Caminos, Canales y Puertos de Madrid. Fruto de esa calibración, se ha realizado un amplio estudio paramétrico que permite cuantificar la influencia que tienen en el comportamiento estructural variables como el apuntamiento de las bóvedas (relación luz/flecha), su esbeltez (relación luz/canto en clave), la altura de los rellenos rígidos, la altura de los rellenos granulares, etc. Ese estudio ha permitido identificar los puntos críticos, las ratios características que condicionan el comportamiento y, en fin, los aspectos clave del análisis estructural de estas construcciones desde el punto de vista de la interrelación, hasta ahora desconocida, de estructura y relleno, que también es estructura. Ello permitirá orientar de mejor manera las inspecciones de estas estructuras y sus análisis estructurales. Finalmente, la tesis concluye con el desarrollo de tres ejemplos, correspondientes cada uno de ellos a los periodos históricos referidos, en los que se pone de manifiesto el papel crucial de los rellenos en la estabilidad no sólo de las bóvedas sino del resto de elementos estructurales que componen un edificio (pilares, muros, botareles, etc.). Al final se presentan las conclusiones del trabajo y se enumeran las muchas líneas de trabajo que quedan abiertas tras esta tesis. It is surprising that the essential role of the backfill at the extrados of masonry vaults and domes has been ignored or misunderstood in the technical literature. The main purpose of this work is to contribute to overcome such a lacuna. Firstly, the morphological configuration of backfill that can be found in the Iberian Peninsula in Roman, Romanesque and Gothic buildings is also presented. Two annexes are devoted to show the collected database and the result of its analysis. Then, the structural role of backfill is characterised, as well as the intrinsic and most significant properties related both to its configuration and structural function. Thus, specific thrust values are proposed to analyse such structures, taking into account the nature and boundary conditions of walls and vaults. The simple, powerful and sufficient tool of analysis that has been developed is also presented, including the main variables involved, especially the backfill. The limit analysis method, followed by a stress verification, including the extrados of vaults and backfill interface, and an enhanced algorithm based on energetic considerations, are used to provide technicians a tool to understand this type of structures efficiently, in a balanced situation between the rather scarce amount of information and sufficient accuracy and liability. The tool was calibrated by comparing the experimental and theoretical results provided by different authors regarding several examples, as well as our own experimental campaign carried out at the Civil Engineering School of Madrid. A parametric study is also developed, providing original information about the structural importance of several parameters, as the span-to-depth or span-to-rise ratios, relative height of backfill, etc. As a result of this analysis, critical points and tendencies of structural behaviour were detected, helping technicians to inspect and analyse these constructions, also revealing some particularities related to their construction. Furthermore, a set of three examples corresponding to the three structural typologies analysed (Roman, Romanesque and Gothic) is studied. The crucial importance of backfill is then highlighted, not only for the stability of vaults or domes, but also for the equilibrium of walls, pillars and buttresses. Finally, the conclusions of the study and the future research fields are also presented.

Tecnologia construtiva de fachada em chapas delgadas estruturadas em light steel framing.

Aumento da produtividade, melhorias na qualidade dos produtos, redução de custos e de impactos ambientais são essenciais para a capacidade competitiva das empresas. A execução da fachada faz parte do caminho crítico da obra, por ser um subsistema que associa as funções de fechamento, acabamento, iluminação e ventilação e ainda por incorporar sistemas prediais; apresenta, por isso também, um alto custo direto em relação aos outros subsistemas do edifício. A tecnologia construtiva de fachadas em chapas delgadas com estrutura em Light Steel Framing (LSF) é uma alternativa viável para aumentar a produtividade e reduzir os prazos de obra, com qualidade e desempenho, e pode trazer benefícios em relação a atividades intensas em mão de obra como é o caso da alvenaria de vedação e de seus revestimentos. O presente trabalho tem por objetivo sistematizar e analisar o conhecimento relativo a essa tecnologia construtiva de fachada. O método adotado compreende revisão bibliográfica. Como contribuição, o trabalho reúne um conjunto organizado de informações sobre os principais sistemas disponíveis no mercado contemplando: a caracterização do sistema de fachada, de suas camadas e dos perfis leves de aço e a sistematização das principais avaliações técnicas de sistemas existentes em outros países, reunindo normas técnicas de produtos e de execução. Acredita-se que a reunião e organização das informações, antes dispersas em diversas referências, têm potencial para subsidiar o meio técnico para tomada de decisão quanto ao uso adequado da nova tecnologia.

Reverse Vending Machines: A Potential Solution for the Florida Plastic Waste Management Challenge

The waste of plastic beverage bottles creates environmental problems and takes up a large volume of landfill space. The high rate of consumption of plastics in the State of Florida is challenging the disposal capacity of waste authorities. The lack of the reverse vending machines in the State of Florida, including applicable scientific or technical literature represented an opportunity for this research to discuss the applicability of this equipment as a potential solution for the management of the plastic waste in Florida. With this research document, I will propose a recycling system for plastic bottles made with PET based on the implementation of reverse vending machines, stressing the importance of the creation of policies that promote recycling and public participation.

Field experiences with floating breakwaters in the eastern United States /

In the past 10 years, the use of floating breakwaters as temporary coastal structures has become increasingly widespread in the United States as an inexpensive means for suppressing waves. However, as with any new technology, there have been many failures and a substantial number of imaginative, successful innovations. One of the chief problems contributing to the failure rate has been a lack of awareness by designers of reliable, up-to-date technical information. As part of a large research effort to remedy this problem, a survey was conducted on field experience with floating breakwaters in the Eastern United States. Results of the survey confirmed that state-of-the-art technical literature is not being properly disseminated. Structures built according to early design manuals were shown to have failed before the completion of their design life. Conversely, floating breakwaters built to the standards set by recent research have fared well and show promise of meeting their design golas. The weakest areas of the present technology are flotation and the anchoring systems. It is recommended that a concentrated research effort be directed toward these problem areas; it is also recommended that the monitoring of state-of-the-art projects continue. (Author).

Descriptive cataloging guide.

"January 1966."

Descriptive cataloging guide.

"July 1966."

The mineral industry of the British Empire and foreign countries. Zinc.

"References to technical literature":p. 165-193.

Energy data base.

Mode of access: Internet.

The mineral industry of the British Empire and foreign countries. War period. Molybdenum. (1913-1919)

At head of title: Imperial mineral resources bureau.