Effects of slope inclination on the rain-induced instability of embankment slopes

Rainfall has been identified as one of the main causes for embankment failures in areas where high annual rainfall is experienced. The inclination of the embankment slope is important for its stability during rainfall. In this study, instrumented model embankments were subjected to artificial rainfalls to investigate the effects of the slope inclination on their stability. The results of the study suggested that when the slope inclination is greater than the friction angle of the soil, the failure is initiated by the loss of soil suction and when it is smaller than the friction angle of the soil, the failure is initiated by the positive pore water pressure developed at the toe of the slope. Further, slopes become more susceptible to sudden collapse during rainfall as the slope angle increases.

Laboratory measurement of hydraulic conductivity functions of two unsaturated sandy soils during drying and wetting processes

The importance of applying unsaturated soil mechanics to geotechnical engineering design has been well understood. However, the consumption of time and the necessity for a specific laboratory testing apparatus when measuring unsaturated soil properties have limited the application of unsaturated soil mechanics theories in practice. Although methods for predicting unsaturated soil properties have been developed, the verification of these methods for a wide range of soil types is required in order to increase the confidence of practicing engineers in using these methods. In this study, a new permeameter was developed to measure the hydraulic conductivity of unsaturated soils using the steady-state method and directly measured suction (negative pore-water pressure) values. The apparatus is instrumented with two tensiometers for the direct measurement of suction during the tests. The apparatus can be used to obtain the hydraulic conductivity function of sandy soil over a low suction range (0-10 kPa). Firstly, the repeatability of the unsaturated hydraulic conductivity measurement, using the new permeameter, was verified by conducting tests on two identical sandy soil specimens and obtaining similar results. The hydraulic conductivity functions of the two sandy soils were then measured during the drying and wetting processes of the soils. A significant hysteresis was observed when the hydraulic conductivity was plotted against the suction. However, the hysteresis effects were not apparent when the conductivity was plotted against the volumetric water content. Furthermore, the measured unsaturated hydraulic conductivity functions were compared with predictions using three different predictive methods that are widely incorporated into numerical software. The results suggest that these predictive methods are capable of capturing the measured behavior with reasonable agreement.

Ultrasensitive strain sensors made from metal-coated carbon nanofiller/epoxy composites

A set of resistance-type strain sensors has been fabricated from metal-coated carbon nanofiller (CNF)/epoxy composites. Two nanofillers, i.e., multi-walled carbon nanotubes and vapor growth carbon fibers (VGCFs) with nickel, copper and silver coatings were used. The ultrahigh strain sensitivity was observed in these novel sensors as compared to the sensors made from the CNFs without metal-coating, and conventional strain gauges. In terms of gauge factor, the sensor made of VGCFs with silver coating is estimated to be 155, which is around 80 times higher than that in a metal-foil strain gauge. The possible mechanism responsible for the high sensitivity and its dependence with the networks of the CNFs with and without metal-coating and the geometries of the CNFs were thoroughly investigated.

Direct shear testing on unsaturated silty soils to investigate the effects of drying and wetting on shear strength parameters at low suction

A modified conventional direct shear device was used to measure unsaturated shear strength of two silty soils at low suction values (0 ~ 50 kPa) that were achieved by following drying and wetting paths of soil water characteristic curves (SWCCs). The results revealed that the internal friction angle of the soils was not significantly affected by either the suction or the drying wetting SWCCs. The apparent cohesion of soil increased with a decreasing rate as suction increased. Shear stress-shear displacement curves obtained from soil specimens subjected to the same net normal stress and different suction values showed a higher initial stiffness and a greater peak stress as suction increased. A soil in wetting exhibited slightly higher peak shear stress and more contractive volume change behavior than that of soil in drying at the same net normal stress and suction.

Cucumber mosaic virus infection of kava (Piper methysticum) and implications for cultural control of kava dieback disease

Cucumber mosaic virus (CMV) was found by reverse transcription polymerase chain reaction (RT-PCR) to be not fully systemic in naturally infected kava (Piper methysticum) plants in Fiji. Twenty-six of 48 samples (54%) from various tissues of three recently infected plants were CMV-positive compared with 7/51 samples (14%) from three long-term infections (plants affected by dieback for more than 1 year). The virus was also found to have a limited ability to move into newly formed stems. CMV was detected in only 2/23 samples taken from re-growth stems arising from known CMV infected/dieback affected plants. Mechanical inoculation experiments conducted in Fiji indicate that the known kava intercrop plants banana (Musa spp.), pineapple (Ananas comosus), peanut (Arachis hypogaea) and the common weed Mikania micrantha are potential hosts for a dieback-causing strain of CMV It was not possible to transmit the virus mechanically to the common kava intercrop plants taro (Colocasia esculenta), Xanthosoma sp., sweet potato (Ipomoea batatas), yam (Dioscorea alata), papaya (Carica papaya) or the weed Momordica charantia. Implications of the results of this research on a possible integrated disease management strategy are discussed.

Mile-a-minute (Mikania micrantha): its distribution, growth and physical and socio-economic impacts in Papua New Guinea

Mikania micrantha, Kunth. H.B.K (Asteraceae) or mile-a-minute is a weed of Neotropical origin in 17 Pacific Island countries. It is becoming increasingly regarded as an invasive weed in Papua New Guinea and is now the focus of an Australian Government-funded biological control program. As part of the program, growth rates, distribution and physical and socia-economic impacts were studied to obtain baseline data and to assist with the field release of biological control agents. Through public awareness campaigns and dedicated surveys, mikania has been reported in most lowland provinces. It is particularly widespread in East New Britain and West New Britain Province. In field trials, mikania grew more than 1 metre per month in open sunny areas but slightly slower when growing under cocoa. The weed invades a wide range of land types, impacting on plantations and food gardens, smothering pawpaw, young cocoa, banana, taro, young oil palms and ornamental plants. In socia-economic surveys, mikania was found to have severe impacts on crop production and income generated through reduced yields and high weeding costs. These studies suggest that there would be substantial benefits to the community if biological control of mikania is successful.

Mikania micrantha Kunth (Asteraceae) (Mile-a-Minute): Its Distribution and Physical and Socioeconomic Impacts in Papua New Guinea

Mikania micrantha or mile-a-minute is regarded as a major invasive weed in Papua New Guinea (PNG) and is now the target of a biological control program. As part of the program, distribution and physical and socioeconomic impacts of M. micrantha were studied to obtain baseline data and to assist with field release of biological control agents. Through public awareness campaigns and dedicated surveys, M. micrantha has been reported in all 15 lowland provinces. It is particularly widespread in East New Britain, as well as in West New Britain and New Ireland. A CLIMEX model suggests that M. micrantha has the potential to continue to spread throughout all lowland areas in PNG. The weed was found in a wide range of land uses, impacting on plantations and food gardens and smothering papaya, young cocoa, banana, taro, young oil palms, and ornamental plants. In socioeconomic surveys, M. micrantha was found to have severe impacts on crop production and income generated through reduced yields and high weeding costs, particularly in subsistence mixed cropping systems. About 89% of all respondents had M. micrantha on their land, and 71% of respondents had to weed monthly. Approximately 96% of respondents in subsistence mixed cropping systems used only physical means of control compared with 68% of respondents in other farming systems. About 45% of all respondents estimated that M. micrantha causes yield losses in excess of 30%. These studies suggest that there would be substantial benefits to landholders if biological control of M. micrantha were to be successful.

Suitable stocking density of tilapia in an aquaponic system

An aquaponic system was studied through the integrated culture of mono-sex GIFT and two types of vegetables viz. morning glory, Ipomoea reptans and taro, Colocasia esculenta in a recirculating system for 15 weeks. Tilapia fry of uniform size of 0.76 g were released in three treatments (stocking densities): 106 fish/m³ (T1), 142 fish/m³ (T2) and 177 fish/m³ (T3) to assess the effect of stocking density on the growth performance of fish. Fish were fed with a commercial feed containing 25% protein. Weight gain (g) of tilapia ranged from 19.41 to 32.67 g and was inversely related with stocking density. Percent weight gain varied between 2553.99 and 4298.68% and was significantly different among the treatments. SGR ranged from 3.09 to 3.59% per day and varied significantly. FCR varied from 2.19 to 2.69 and had a positive correlation with stocking density. The highest survival rate (%) was achieved in T1 (99%) followed by T2 (98%) and T3 (96%). Production of fish ranged from 3.43 to 3.52 kg/m³ and was inversely related with stocking density. The present study demonstrated that 106 fish/m³ was the best stocking density in terms of growth, food conversion ratio, survival and production for tilapia culture in the aquaponic system.

Concordia Statue

The 8-foot tall Concordia statue made of bronze was unveiled in July of 1969. It was created by Canadian sculptress Eza Mayhew and weighs over 2500 lbs. Originally commissioned for Expo 67, it was later donated to Brock by Seagram's Distilling Company. The statue was placed just southeast of the Brock Tower, and still stands there today - between the Thistle Complex, Taro Hall, and Mackenzie Chown A Block. View facing northwest.

Tower and Ramp Construction

The Schmon Tower around 1968 when the ramp was being constructed. The Thistle ramp was torn down around two decades later to make room for Taro Hall and the Alumni Building.

SchmonTower and Thistle East

The Schmon Tower can be seen here behind several tall trees located on the eastern edge of the Thistle Complex. This view is taken from approximately where Taro Hall stands.

La proyección de imagen a partir de Soft Power, mediante Nation Branding y Diplomacia Pública en el caso de Japón, durante el periodo 2002 – 2010

En el actual contexto de globalización y con el comienzo de la era de la información, cada vez más Estados han buscado proyectar una imagen favorable con el objetivo de atraer atención y crear una reputación que permitan cumplir objetivos de política exterior y fomentar el desarrollo económico, logrando de esta manera un posicionamiento en el sistema internacional mediante estrategias novedosas, que incluyen elementos tanto diplomáticos, políticos, económicos, como comerciales y culturales. Para Japón, Nation Branding y la diplomacia pública han sido dos de las principales herramientas para lograr este reposicionamiento internacional, resaltando atractivos como las tradiciones culturales, el turismo, los incentivos para negocios, y trabajando en conjunto entre el gobierno nacional, el sector privado y la sociedad civil para crear relaciones entre el país y gobiernos y sociedades a nivel internacional.