A Wireless Charging System Applying Phase-Shift and Amplitude Control to Maximize Efficiency and Extractable Power

Wireless power transfer (WPT) is an emerging technology with an increasing number of potential applications to transfer power from a transmitter to a mobile receiver over a relatively large air gap. However, its widespread application is hampered due to the relatively low efficiency of current Wireless power transfer (WPT) systems. This study presents a concept to maximize the efficiency as well as to increase the amount of extractable power of a WPT system operating in nonresonant operation. The proposed method is based on actively modifying the equivalent secondary-side load impedance by controlling the phase-shift of the active rectifier and its output voltage level. The presented hardware prototype represents a complete wireless charging system, including a dc-dc converter which is used to charge a battery at the output of the system. Experimental results are shown for the proposed concept in comparison to a conventional synchronous rectification approach. The presented optimization method clearly outperforms state-of-the-art solutions in terms of efficiency and extractable power.

Molecular and Biochemical Characterization of Cytosolic Phosphoglucomutase in Maize1 : Expression during Development and in Response to Oxygen Deprivation

Phosphoglucomutase (PGM) catalyzes the interconversion of glucose (Glc)-1- and Glc-6-phosphate in the synthesis and consumption of sucrose. We isolated two maize (Zea mays L.) cDNAs that encode PGM with 98.5% identity in their deduced amino acid sequence. Southern-blot analysis with genomic DNA from lines with different Pgm1 and Pgm2 genotypes suggested that the cDNAs encode the two known cytosolic PGM isozymes, PGM1 and PGM2. The cytosolic PGMs of maize are distinct from a plastidic PGM of spinach (Spinacia oleracea). The deduced amino acid sequences of the cytosolic PGMs contain the conserved phosphate-transfer catalytic center and the metal-ion-binding site of known prokaryotic and eukaryotic PGMs. PGM mRNA was detectable by RNA-blot analysis in all tissues and organs examined except silk. A reduction in PGM mRNA accumulation was detected in roots deprived of O2 for 24 h, along with reduced synthesis of a PGM identified as a 67-kD phosphoprotein on two-dimensional gels. Therefore, PGM is not one of the so-called “anaerobic polypeptides.” Nevertheless, the specific activity of PGM was not significantly affected in roots deprived of O2 for 24 h. We propose that PGM is a stable protein and that existing levels are sufficient to maintain the flux of Glc-1-phosphate into glycolysis under O2 deprivation.

Réaction d’amination intramoléculaire de liens C-H à partir de N-mésyloxycarbamates catalysée par des complexes de rhodium et d’autres métaux de transition : s ynthèse verte d’oxazolidinones

La réaction d’amination de liens C-H, impliquant la transformation directe d’un lien C-H en lien C-N constitue une approche synthétique d’avenir pour la préparation de composés azotés. L’application de cette stratégie de manière intramoléculaire apparaît comme une approche puissante pour la synthèse de composés hétérocycliques. En particulier, les oxazolidinones, carbamates cycliques à cinq chaînons, constituant une nouvelle classe d’antibiotiques très prometteuse, pourraient être synthétisées par cette méthode. Il y a moins d’une dizaine d’années, notre groupe de recherche a travaillé sur le développement de méthodologies utilisant des espèces nitrènes métalliques pour l’amination intra et intermoléculaire. Les N-tosyloxycarbamates, en présence d’une base et d’un catalyseur dimère de rhodium (II) tétracarboxylate sont les précurseurs de ces espèces nitrènes métalliques, capables de faire l’insertion de liens C(sp3)-H. Dans ces travaux de thèse, nous avons travaillé sur le développement d’une méthode plus « verte » d’amination intramoléculaire. Les N-mésyloxycarbamates, plus légers que leurs homologues N-tosyloxycarbamates, ont été identifiés comme d’excellents précurseurs de nitrènes. La méthodologie développée ne nécessite que 3 mol % de dimère de rhodium Rh2(tpa)4 et de 1,5 équivalents de solution aqueuse saturée de K2CO3, le tout dans l’acétate d’éthyle et donne de bons rendements de cyclisation. Une étude de l’étendue réactionnelle a été effectuée, montrant la tolérance et les limitations de notre système catalytique : les hétéroatomes ne posent pas de problèmes hormis l’atome d’azote, qui doit être protégé afin de garantir la transformation. En outre, nous avons constaté que les liens C-H aliphatiques secondaires sont moins réactifs que les liens tertiaires. Après avoir tenté de développer des conditions réactionnelles spécifiques aux liens C-H non activés, nous avons montré la possibilité d’aminer des liens C-H propargyliques de manière chimiosélective ; la triple liaison C-C peut ensuite être dérivatisée efficacement, donnant accès à la formule saturée correspondante ainsi qu’à d’autres motifs. Dans un désir de substituer les complexes de rhodium par d’autres complexes de métaux plus abondants et moins dispendieux, nous nous sommes tournés, dans un premier temps, vers les complexes de fer et par la suite, vers les pinceurs de nickel. Les phtalocyanines de fer ont été identifiées comme étant de bons catalyseurs de l’amination intramoléculaire de N-mésyloxycarbamates. Le chlorure de phtalocyanine de fer (III), en présence d’un sel de AgBF4 et de K2CO3, dans le 1,1,2,2-tétrachloroéthane anhydre, permet l’obtention de la 4-phenyloxazolidin-2-one avec 63% de rendement. En outre, il est possible d’atteindre un rendement de 49% à partir du même substrat N-mésyloxycarbamate, par catalyse avec un pinceur de nickel de type POCN, en présence d’un sel de mésylate. Des indices sur le mécanisme des ces deux transformations ont pu être recueillis lors de la courte étude de ces systèmes.

Réaction d’amination intramoléculaire de liens C-H à partir de N-mésyloxycarbamates catalysée par des complexes de rhodium et d’autres métaux de transition : s ynthèse verte d’oxazolidinones

La réaction d’amination de liens C-H, impliquant la transformation directe d’un lien C-H en lien C-N constitue une approche synthétique d’avenir pour la préparation de composés azotés. L’application de cette stratégie de manière intramoléculaire apparaît comme une approche puissante pour la synthèse de composés hétérocycliques. En particulier, les oxazolidinones, carbamates cycliques à cinq chaînons, constituant une nouvelle classe d’antibiotiques très prometteuse, pourraient être synthétisées par cette méthode. Il y a moins d’une dizaine d’années, notre groupe de recherche a travaillé sur le développement de méthodologies utilisant des espèces nitrènes métalliques pour l’amination intra et intermoléculaire. Les N-tosyloxycarbamates, en présence d’une base et d’un catalyseur dimère de rhodium (II) tétracarboxylate sont les précurseurs de ces espèces nitrènes métalliques, capables de faire l’insertion de liens C(sp3)-H. Dans ces travaux de thèse, nous avons travaillé sur le développement d’une méthode plus « verte » d’amination intramoléculaire. Les N-mésyloxycarbamates, plus légers que leurs homologues N-tosyloxycarbamates, ont été identifiés comme d’excellents précurseurs de nitrènes. La méthodologie développée ne nécessite que 3 mol % de dimère de rhodium Rh2(tpa)4 et de 1,5 équivalents de solution aqueuse saturée de K2CO3, le tout dans l’acétate d’éthyle et donne de bons rendements de cyclisation. Une étude de l’étendue réactionnelle a été effectuée, montrant la tolérance et les limitations de notre système catalytique : les hétéroatomes ne posent pas de problèmes hormis l’atome d’azote, qui doit être protégé afin de garantir la transformation. En outre, nous avons constaté que les liens C-H aliphatiques secondaires sont moins réactifs que les liens tertiaires. Après avoir tenté de développer des conditions réactionnelles spécifiques aux liens C-H non activés, nous avons montré la possibilité d’aminer des liens C-H propargyliques de manière chimiosélective ; la triple liaison C-C peut ensuite être dérivatisée efficacement, donnant accès à la formule saturée correspondante ainsi qu’à d’autres motifs. Dans un désir de substituer les complexes de rhodium par d’autres complexes de métaux plus abondants et moins dispendieux, nous nous sommes tournés, dans un premier temps, vers les complexes de fer et par la suite, vers les pinceurs de nickel. Les phtalocyanines de fer ont été identifiées comme étant de bons catalyseurs de l’amination intramoléculaire de N-mésyloxycarbamates. Le chlorure de phtalocyanine de fer (III), en présence d’un sel de AgBF4 et de K2CO3, dans le 1,1,2,2-tétrachloroéthane anhydre, permet l’obtention de la 4-phenyloxazolidin-2-one avec 63% de rendement. En outre, il est possible d’atteindre un rendement de 49% à partir du même substrat N-mésyloxycarbamate, par catalyse avec un pinceur de nickel de type POCN, en présence d’un sel de mésylate. Des indices sur le mécanisme des ces deux transformations ont pu être recueillis lors de la courte étude de ces systèmes.

True liquid crystal templating of SBA-15 with reduced microporosity

Mesoporous silica SBA-15 was synthesised by the true liquid crystal templating method, yielding a material with reduced microporosity compared with that produced by the more conventional liquid crystal templating route. Further advancements allow the generation of metal nanoparticle-doped SBA-15 materials with well-defined metal particle sizes, which posses potential as catalytic systems. © 2013 Elsevier Inc. All rights reserved.

Sonogashira cross-coupling and homocoupling on a silver surface:chlorobenzene and phenylacetylene on Ag(100)

Scanning tunneling microscopy, temperature-programmed reaction, near-edge X-ray absorption fine structure spectroscopy, and density functional theory calculations were used to study the adsorption and reactions of phenylacetylene and chlorobenzene on Ag(100). In the absence of solvent molecules and additives, these molecules underwent homocoupling and Sonogashira cross-coupling in an unambiguously heterogeneous mode. Of particular interest is the use of silver, previously unexplored, and chlorobenzene—normally regarded as relatively inert in such reactions. Both molecules adopt an essentially flat-lying conformation for which the observed and calculated adsorption energies are in reasonable agreement. Their magnitudes indicate that in both cases adsorption is predominantly due to dispersion forces for which interaction nevertheless leads to chemical activation and reaction. Both adsorbates exhibited pronounced island formation, thought to limit chemical activity under the conditions used and posited to occur at island boundaries, as was indeed observed in the case of phenylacetylene. The implications of these findings for the development of practical catalytic systems are considered.

Reversibility Iteration Method to Understand Reaction Networks and to Solve Micro-Kinetics in Heterogeneous Catalysis

Solving microkinetics of catalytic systems, which bridges microscopic processes and macroscopic reaction rates, is currently vital for understanding catalysis in silico. However, traditional microkinetic solvers possess several drawbacks that make the process slow and unreliable for complicated catalytic systems. In this paper, a new approach, the so-called reversibility iteration method (RIM), is developed to solve microkinetics for catalytic systems. Using the chemical potential notation we previously proposed to simplify the kinetic framework, the catalytic systems can be analytically illustrated to be logically equivalent to the electric circuit, and the reaction rate and coverage can be calculated by updating the values of reversibilities. Compared to the traditional modified Newton iteration method (NIM), our method is not sensitive to the initial guess of the solution and typically requires fewer iteration steps. Moreover, the method does not require arbitrary-precision arithmetic and has a higher probability of successfully solving the system. These features make it ∼1000 times faster than the modified Newton iteration method for the systems we tested. Moreover, the derived concept and the mathematical framework presented in this work may provide new insight into catalytic reaction networks.

New biomass derived carbon catalysts for biomass valorization

Due to diminishing petroleum reserves, unsteady market situation and the environmental concerns associated with utilization of fossil resources, the utilization of renewables for production of energy and chemicals (biorefining) has gained considerable attention. Biomass is the only sustainable source of organic compounds that has been proposed as petroleum equivalent for the production of fuels, chemicals and materials. In fact, it would not be wrong to say that the only viable answer to sustainably convene our future energy and material requirements remain with a bio-based economy with biomass based industries and products. This has prompted biomass valorization (biorefining) to become an important area of industrial research. While many disciplines of science are involved in the realization of this effort, catalysis and knowledge of chemical technology are considered to be particularly important to eventually render this dream to come true. Traditionally, the catalyst research for biomass conversion has been focused primarily on commercially available catalysts like zeolites, silica and various metals (Pt, Pd, Au, Ni) supported on zeolites, silica etc. Nevertheless, the main drawbacks of these catalysts are coupled with high material cost, low activity, limited reusability etc. – all facts that render them less attractive in industrial scale applications (poor activity for the price). Thus, there is a particular need to develop active, robust and cost efficient catalytic systems capable of converting complex biomass molecules. Saccharification, esterification, transesterification and acetylation are important chemical processes in the valorization chain of biomasses (and several biomass components) for production of platform chemicals, transportation fuels, food additives and materials. In the current work, various novel acidic carbons were synthesized from wastes generated from biodiesel and allied industries, and employed as catalysts in the aforementioned reactions. The structure and surface properties of the novel materials were investigated by XRD, XPS, elemental analysis, SEM, TEM, TPD and N2-physisorption techniques. The agro-industrial waste derived sulfonic acid functionalized novel carbons exhibit excellent catalytic activity in the aforementioned reactions and easily outperformed liquid H2SO4 and conventional solid acids (zeolites, ion-exchange resins etc). The experimental results indicated strong influence of catalyst pore-structure (pore size, pore-volume), concentration of –SO3H groups and surface properties in terms of the activity and selectivity of these catalysts. Here, a large pore catalyst with high –SO3H density exhibited the highest esterification and transesterification activity, and was successfully employed in biodiesel production from fatty acids and low grade acidic oils. Also, a catalyst decay model was proposed upon biodiesel production and could explain that the catalyst loses its activity mainly due to active site blocking by adsorption of impurities and by-products. The large pore sulfonated catalyst also exhibited good catalytic performance in the selective synthesis of triacetin via acetylation of glycerol with acetic anhydride and out-performed the best zeolite H-Y with respect to reusability. It also demonstrated equally good activity in acetylation of cellulose to soluble cellulose acetates, with the possibility to control cellulose acetate yield and quality (degree of substitution, DS) by a simple adjustment of reaction time and acetic anhydride concentration. In contrast, the small pore and highly functionalized catalysts obtained by hydrothermal method and from protein rich waste (Jatropha de-oiled waste cake, DOWC), were active and selective in the esterification of glycerol with fatty acids to monoglycerides and saccharification of cellulosic materials, respectively. The operational stability and reusability of the catalyst was found to depend on the stability of –SO3H function (leaching) as well as active site blocking due to adsorption of impurities during the reaction. Thus, our results corroborate the potential of DOWC derived sulfated mesoporous active carbons as efficient integrated solid acid catalysts for valorization of biomass to platform chemicals, biofuel, bio-additive, surfactants and celluloseesters.

Active site engineering for heterogeneous catalysis using emerging nano-structured materials

The growing concern about the depletion of oil has spurred worldwide interest in finding alternative feedstocks for important petrochemical commodities and fuels. On the one hand, the enormous re-serves found (208 trillion cubic feet proven1), environmental sustainability and lower overall costs point to natural gas as the primary source for energy and chemicals in the near future.2 Nowadays the transformation of methane into useful chemicals and liquid fuels is only feasible via synthesis gas, a mixture of molecular hydrogen and carbon monoxide, that is further transformed to methanol or to hydrocarbons under moderate reaction conditions (150-350 °C and 10-100 bar).3 For a major cost reduction and in order to valorize small natural gas sources, either more efficient "syngas to products" catalysts should be produced or the manner in which methane is initially activated should be changed, ideally by developing catalysts able to directly oxidize methane to interesting products such as methanol. On the other hand, from the point of view of CO2 emissions, the use of the re-maining fossil resources will further contribute to global warming. In this scenario, the development of efficient routes for the transformation of CO2 into useful chemicals and fuels would represent a considerable step forward towards sustainability. Indeed, the environmental and economic incen-tives to develop processes for the conversion of CO2 into fuels and chemicals are great. However, for such conversions to become economically feasible, considerable research is necessary. In this lecture we will summarize our recent efforts into the design of new catalytic systems, based on MOFs and COFs, to address these challenges. Examples include the development of new Fe based FTS catalysts, electrocatalysts for the selective conversion of CO2 into syngas, the development of efficient catalysts for the utilization of formic acid as hydrogen storage vector and the development of new enzyme inspired systems for the direct transformation of methane to methanol under mild reaction conditions. References (1) http://www.clearonmoney.com/dw/doku.php?id=public:natural_gas_reserves. (2) Derouane, E. G.; Parmon, V.; Lemos, F.; Ribeiro, F. R. Sustainable Strategies for the Up-grading of Natural Gas: Fundamentals, Challenges, and Opportunities; Springer, 2005. (3) Rofer-DePoorter, C. K. Chemical Reviews. ACS Publications 1981, pp 447–474.

A comparative study of hydroxyl- and carboxylate-functionalized imidazolium and benzimidazolium salts as precursors for N-heterocyclic carbene ligands

The preparation of imidazolium and benzimidazolium salts with hydroxyl or carboxylate functions has been achieved using straightforward synthetic pathways. These salts in combination with palladium(II) acetate give active catalytic systems for Suzuki reaction. A comparative study has been performed, which has revealed that both the heterocycle and the functional group are important for the catalytic activity and stability of the catalyst.

Mesoporous mixed Nb2O5-ZrO2 catalysts for dehydration of glucose into 5-hydroxymethylfurfural

Biomass is the world’s most important renewable carbon source, whose major component, carbohydrates, can be valorized by transformation into biofuels and high value-added chemicals. Among the latter, 5-hydroxymethylfurfural (HMF), obtained by C6 carbohydrates dehydration, is a versatile and key intermediate for the production of a large spectrum of biobased chemicals. Different catalytic systems have been evaluated for HMF production, mostly based on heterogeneous catalysis as alternative to the use of conventional mineral acids [1]. Moreover, niobium oxide has shown interesting properties as acid catalyst for dehydration of sugars [2-3]. On the other hand, the high surface area and large pore size of mesoporous solids make them suitable for many catalytic processes. In the present work, the dehydration of glucose to HMF has been evaluated by using different mesoporous mixed Nb2O5-ZrO2 in a biphasic water–Methyl Isobutyl Ketone (MIBK) solvent system to avoid the HMF degradation. Different experimental parameters, such as reaction temperature and time, as well as the addition of CaCl2 have been studied in order to maximize the HMF yield.N2 adsorption-desorption isotherms have corroborated the mesostructured character of catalysts, being all isotherms of Type IV according to the IUPAC classification. BET surface area decreases for catalysts with higher Zr content (Table 1). Likewise, pore volume and average pore diameter values diminish after Zr incorporation. Concerning the acid properties, a clear correlation between Nb and acidity can be observed, in such a way that total acidity, as deduced from NH3-TPD, decreases when the Zr content rises, and consequently the amount of Nb is reduced.These mesoporous Nb-Zr catalysts have been tested in the dehydration of glucose to HMF at 175 ºC under batch operation in aqueous solution, using MIBK as co-solvent. It can be observed that both glucose conversion and HMF yield increase with the Nb content, being maximum (90% and 36%, respectively) after 90 minutes for Nb2O5. This trend changes when CaCl2 is added to the reaction medium, improving the catalytic performance of mixed oxides and ZrO2, but Nb2O5 maintains similar results than without salt addition. This could be justified by the interaction between CaCl2 and Lewis acid sites, since zirconium oxide possesses a higher amount of this acid sites type.

A new post-metallocene-ti catalyst with maltolate bidentade ligand: an investigation in heterogeneous polymerization reactions in different mesoporous supports

A new titanium catalyst easily synthesized from ethylmaltol bidentate chelator ligand was studied in homogeneous and heterogeneous ethylene polymerization. The dichlorobis(3-hydroxy-2-ethyl-4-pyrone)titanium(IV) complex was characterized by 1H and 13C NMR (nuclear magnetic resonance), UV-Vis and elemental analysis. Theoretical study by density functional theory (DFT) showed that the complex chlorines exhibit cis configuration, which is important for the activity in olefin polymerization. The complex was supported by two methods, direct impregnation or methylaluminoxane (MAO) pre-treatment, in five mesoporous supports: MCM-41 (micro and nano), SBA-15 and also the corresponding modified Al species. All the catalytic systems were active in ethylene polymerization and the catalytic activity was strongly influenced by the method of immobilization of the catalyst and the type of support.

Improving magnetic coupling for battery charging through 3D magnetic flux

The spatial distribution of the magnetic field and the coupling between the coils in the Wireless Power Transfer (WPT) systems is an important aspect to consider in the system design and efficiency optimization. The presented study in this paper is based on tests performed on a physical model. The transmitting (primary) equipment, is an electrical three-phase system, capable to be connected in star or delta (both electrically and geometrically). The measured results allow to describe graphically the magnetic field distribution in three dimensions. The analytical formulas aim to help to understand and to quantify the physical phenomena but they cannot be considered a universal approach and the measurement results help to understand better the observable facts. In the WPT, the key issues that will influence the efficiency, are the alignment of the coils, the spatial orientation of the magnetic field, the detachment and the tilt between the windings, all they changing the magnetic coupling between the transmitter and the receiver of energy. This research is directed not only to the magnetic field distribution but finally, to optimize the energy transfer efficiency.

Theoretical and experimental studies of gold catalysts for glucose oxidation

The glucaric acid (GLA) has been identified as a “top value-added chemical from biomass” that can be employed for many uses; for instance, it could be a precursor of adipic acid, a monomer of Nylon-6,6. GLA can be synthetized by the oxidation of glucose (GLU), passing through the intermediate gluconic acid (GLO). In recent years, a new process has been sought to obtain GLA in an economic and environmental sustainable way, in order to replace the current use of HNO3 as a stoichiometric oxidant, or electrocatalysis and biochemical synthesis, which show several disadvantages. Thereby, this work is focused on the study of catalysts based on gold nanoparticles supported on activated carbon for the oxidation reaction of GLU to GLA using O2 as an oxidant agent and NaOH as base. The sol-immobilization method leads us to obtain small and well dispersed nanoparticles, characterized by UV-Vis, XRD and TEM techniques. Repeating the reaction on different batches of catalyst, both the synthesis and the reaction were confirmed to be reproducible. The effect of the reaction time feeding GLO as reagent was studied: the results show that the conversion of GLO increases as the reaction time increases; however, the yields of GLA and others increase up to 1 hour, and then they remain constant. In order to obtain information on the catalytic mechanism at the atomistic level, a computational study based on density functional theory and atomistic modeling of the gold nano-catalyst were performed. Highly symmetric (icosahedral and cubo-octahedral) and distorted Au55 nanoparticles have been optimized along with Au(111) and Au(100) surfaces. Distorted structures were found to be more stable than symmetrical ones due to relativistic effects. On these various models the adsorptions of various species involved in the catalysis have been studied, including OH- species, GLU and GLO. The study carried out aims to provide a method for approaching to the study of nanoparticellary catalytic systems.

CO2 utilization and alternative solvents: effective tools for sustainable applications

The growing concentration of CO2 in the atmosphere and its harmful consequences has led the scientific community to direct its efforts towards sustainable processes. Among the possible approaches, the use of CO2 and alternative solvents are two strategies that are having widespread diffusion. In this work the reuse of CO2 is expressed by using it as a reaction reagent and as trigger to change the physical properties of a catalyst thus facilitating its recovery. As regards the CO2 use as reagent, two catalytic systems have been developed for the conversion of CO2 and epoxides into cyclic carbonates, used in the synthesis of polymers and as aprotic solvents. Homogeneous catalysts made by choline-based eutectic mixtures and heterogeneous catalysts made from biopolymers and waste pyrolysis have been synthesized and tested on this reaction. The carbonate interchange reaction (CIR) of a diol with a linear carbonate (as dimethyl carbonate) is an interesting alternative, for the synthesis of cyclic carbonates; as the second application of CO2 as polarity trigger, it was used for catalyst recovery. In fact DBU, here used as catalyst, is part of the so called “switchable solvents”: they can pass from a less-polar to a more-polar form (and from being soluble to non-soluble in the reaction mixture) when reacting with CO2 in presence of water or alcohols. Also in this case, heterogeneous catalysts made from biopolymers and waste pyrolysis have been synthesized and tested on CIR. As for the use of alternative solvents, this work focuses on the use of Deep Eutectic Solvents (DESs). They are a new generation of solvents composed by a mixture of two or more substances, liquid at room temperature, and non-volatile. New and biobased DESs were here used: i) as reaction media to carry out chemoenzymatic epoxidation; ii) in the extraction of astaxanthin from microalgae culture.