Laser ablation modelling of aluminium, silver and crystalline silicon for applications in photovoltaic technologies

Laser material processing is being extensively used in photovoltaic applications for both the fabrication of thin film modules and the enhancement of the crystalline silicon solar cells. The two temperature model for thermal diffusion was numerically solved in this paper. Laser pulses of 1064, 532 or 248 nm with duration of 35, 26 or 10 ns were considered as the thermal source leading to the material ablation. Considering high irradiance levels (108–109 W cm−2), a total absorption of the energy during the ablation process was assumed in the model. The materials analysed in the simulation were aluminium (Al) and silver (Ag), which are commonly used as metallic electrodes in photovoltaic devices. Moreover, thermal diffusion was also simulated for crystalline silicon (c-Si). A similar trend of temperature as a function of depth and time was found for both metals and c-Si regardless of the employed wavelength. For each material, the ablation depth dependence on laser pulse parameters was determined by means of an ablation criterion. Thus, after the laser pulse, the maximum depth for which the total energy stored in the material is equal to the vaporisation enthalpy was considered as the ablation depth. For all cases, the ablation depth increased with the laser pulse fluence and did not exhibit a clear correlation with the radiation wavelength. Finally, the experimental validation of the simulation results was carried out and the ability of the model with the initial hypothesis of total energy absorption to closely fit experimental results was confirmed.

Order and disorder in fluid motion.

The development of complex states of fluid motion is illustrated by reviewing a series of experiments, emphasizing film flows, surface waves, and thermal convection. In one dimension, cellular patterns bifurcate to states of spatiotemporal chaos. In two dimensions, even ordered patterns can be surprisingly intricate when quasiperiodic patterns are included. Spatiotemporal chaos is best characterized statistically, and methods for doing so are evolving. Transport and mixing phenomena can also lead to spatial complexity, but the degree depends on the significance of molecular or thermal diffusion.

From point defects to plate tectonic faults

Understanding and explaining emergent constitutive laws in the multi-scale evolution from point defects, dislocations and two-dimensional defects to plate tectonic scales is an arduous challenge in condensed matter physics. The Earth appears to be the only planet known to have developed stable plate tectonics as a means to get rid of its heat. The emergence of plate tectonics out of mantle convection appears to rely intrinsically on the capacity to form extremely weak faults in the top 100 km of the planet. These faults have a memory of at least several hundred millions of years, yet they appear to rely on the effects of water on line defects. This important phenomenon was first discovered in laboratory and dubbed ``hydrolytic weakening''. At the large scale it explains cycles of co-located resurgence of plate generation and consumption (the Wilson cycle), but the exact physics underlying the process itself and the enormous spanning of scales still remains unclear. We present an attempt to use the multi-scale non-equilibrium thermodynamic energy evolution inside the deforming lithosphere to move phenomenological laws to laws derived from basic scaling quantities, develop self-consistent weakening laws at lithospheric scale and give a fully coupled deformation-weakening constitutive framework. At meso- to plate scale we encounter in a stepwise manner three basic domains governed by the diffusion/reaction time scales of grain growth, thermal diffusion and finally water mobility through point defects in the crystalline lattice. The latter process governs the planetary scale and controls the stability of its heat transfer mode.

Growth of crystals in optical tweezers

We report here on the use of optical tweezers in the growth and manipulation of protein and inorganic crystals. Sodium chloride and hen egg-white lysozyme crystals were grown in a batch process, and then seeds from the solution were introduced into the optical tweezers. The regular and controllable shape and the known optical birefringence in these structures allowed a detailed study of the orientation effects in the beam due to both polarization and gradient forces. Additionally, we determined that the laser tweezers could be used to suspend a crystal for three-dimensional growth under varying conditions. Studies included increasing the protein concentration, thermal cycling, and a diffusion-induced increase in precipitant concentration. Preliminary studies on the use of the tweezers to create a localized seed for growth from polyethylene oxide solutions are also reported.

Theoretical studies of the mid-latitude ionosphere

Following a brief description of the atmosphere and ionosphere in Chapter I we describe how the equations of continuity and momentum for 0+, H+, He+, 0++ are derived from the formulations of St-Maurice and Schunk(1977) and Quegan et al.(1981) in Chapter II. In Chapter III we investigate the nature of the downward flow of protons in a collapsing post-sunset ionosphere. We derive an analytical form for the limiting temperature, we also note the importance of the polarization field term and concluded that the flow will remain subsonic for realistic conditions. The time-dependent behaviour of He+ under sunspot minimum conditions is investigated in Chapter IV. This is achieved by numerical solution of the 0+, H+ and,He+ continuity and momentum equations, treating He+ as a minor ion with 0+ , H+ as major ions. We found that He+ flows upwards during the day-time and downwards during the nighttime. He+ flux tube content reached a maximum on the 8th day of the integration period and started to decreasing. This is due to the large amount of H+ present at the late stages of the integration period which makes He+ unable to diffuse through the H+ layer away from the loss region. In Chapter V we investigate the behaviour of 0++ using sunspot maximum parameters. Although our results support the findings of Geis and Young (1981) that the large amounts of 0++ at the equator are caused mainly by thermal diffusion, the model used by Geis and Young overemphesizes the effect of thermal diffusion. The importance of 0++ - 0+ collision frequency is also noted. In Chapter VI we extend the work of Chapter IV, presenting a comparative study of H and He at sunspot minimum and sunspot maximum.In this last Chapter all three ions, O+ ,H+ and He+ , are treated theoretically as major ions and we concentrate mainly on light ion contents and fluxes. The results of this Chapter indicate that by assuming He+ as a minor ion we under-estimate He+ and over-estimate. H+. Some interesting features concerning the day to day behaviour of the light ion fluxes arise. In particular the day-time H+ fluxes decrease from day to day in contrast to the work of Murphy et al.(1976). In appendix.A we derive some analytical forms for the optical depth so that the models can include a realistic description of photoionization.

Natural convection flow with combined buoyancy effects due to thermal and mass diffusion in a thermally stratified media

We present here a numerical study of laminar doubly diffusive free convection flows adjacent to a vertical surface in a stable thermally stratified medium. The governing equations of mass, momentum, energy and species are non-dimensionalized. These equations have been solved by using an implicit finite difference method and local non-similarity method. The results show many interesting aspects of complex interaction of the two buoyant mechanisms that have been shown in both the tabular as well as graphical form.