Avaliação da influência da taxa de resfriamento posterior ao tratamento térmico nas propriedades mecânicas do aço API 5L X70

In this work a study about the mechanical properties of the API 5L X70 steel, with or without heat treating, has been made, with the intetion of assess the influence of cooling after the austenitization heat treating by air cooling (normalizing) and a rapid cooling with oil (tempering). This steel is known by high strength and ductility values and it is commonly used in the manufacture of oil pipes. The growing energy demand encouraged the study and manufacture of this material. Although this microalloyed dispense subsequent heat treatings, it was proven that its implementation is very advantageous for this type of application, improving hardness and plastic stability. It was also assessed that the faster the cooling rate is, the better will be these properties

Effect of intermittent drying and storage on parchment coffee quality

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Análise microestrutural e caracterização mecânica do aço AISI 4350 submetido a diferentes tratamentos térmicos

The multiphase steels are gaining increasing attention in scientific studies because of the different mechanical and microstructural properties that the material can achieve under different thermomechanical and heat treatments that can be submitted. In the present study, it was made a microstructural study thru the triple attack technic associated with optical microscopy and mechanical characterization of medium carbon AISI 4350 steel thru a tensile strength test, subjected to three routes of heat treatment: annealing, quenching and tempering and isothermal annealing. It was verified the predominance of ferrite-perlite constituent in the specimen annealed, martensitic in the quenched and tempered specimen and bainitic in the annealed isothermally specimen. The annealed material showed a higher ductility, while the hardened and tempered specimen showed the highest hardness and ultimately the bainitic specimen showed a combination of the two abovementioned mechanical properties. Thus, we proved that the multiphase steel SAE 4350 can be a versatile material with great potential for various industrial applications

Análise microestrutural e caracterização mecânica do aço AISI 4350 submetido a diferentes tratamentos térmicos

The multiphase steels are gaining increasing attention in scientific studies because of the different mechanical and microstructural properties that the material can achieve under different thermomechanical and heat treatments that can be submitted. In the present study, it was made a microstructural study thru the triple attack technic associated with optical microscopy and mechanical characterization of medium carbon AISI 4350 steel thru a tensile strength test, subjected to three routes of heat treatment: annealing, quenching and tempering and isothermal annealing. It was verified the predominance of ferrite-perlite constituent in the specimen annealed, martensitic in the quenched and tempered specimen and bainitic in the annealed isothermally specimen. The annealed material showed a higher ductility, while the hardened and tempered specimen showed the highest hardness and ultimately the bainitic specimen showed a combination of the two abovementioned mechanical properties. Thus, we proved that the multiphase steel SAE 4350 can be a versatile material with great potential for various industrial applications

Effects of cryogenic and stress relief treatments on temper carbide precipitation in AISI D2 tool steel

The effects of cryogenic and stress relief treatments on temper carbide precipitation in the cold work tool steel AISI D2 were studied. For the cryogenic treatment the temperature was −196°C and the holding time was 2, 24 or 30 h. The stress relief heat treatment was carried at 130°C/90 min, when applied. All specimens were compared to a standard thermal cycle. Specimens were studied using metallographic characterisation, X-ray diffraction and thermoelectric power measurements. The metallographic characterisation used SEM (scanning electron microscopy) and SEM-FEG (SEM with field emission gun), besides OM (optical microscopy). No variation in the secondary carbides (micrometre sized) precipitation was found. The temper secondary carbides (nanosized) were found to be more finely dispersed in the matrix of the specimens with cryogenic treatment and without stress relief. The refinement of the temper secondary carbides was attributed to a possible in situ carbide precipitation during tempering.

L'impegno la passione l'obbedienza. Olinto Marella intellettuale e sacerdote tra Otto e Novecento

È importante ricordare che l’attuale Archivio Marella (AM) è stato costituito sotto la direzione del prof.re Mauro Pesce insieme alla dott.ssa Donatella Micheletti negli anni 1981-1983, dopo che Edero Gattamorta aveva contribuito in modo determinante a raccogliere il materiale che veniva inseguito inserito e pubblicato nel lavoro di tesi: Olinto Marella (1882-1969). Rinvenimento e sistemazione dell’archivio. Schizzo biografico, AA 1975-76, relatore Mauro Pesce, Università Bologna, Facoltà Scienze Politiche. I nuclei principali del materiale conservato nell’archivio riguardano: 1) la vita di Marella; 2) le iniziative caritative di M. dalla metà degli anni trenta in poi; 3) la famiglia Marella, soprattutto lo zio G. M. Marella; 4) la biblioteca. Già nella Guida alla consultazione dell’archivio curata da M. Pesce e stampata nel 1984 si rilevava come il materiale inventariato dal dr. E. Gattamorta nel 1975-76 del settore b) e quello del settore c) fosse assolutamente provvisorio e in parte non catalogato

The role of microglia in neurodegeneration and endogenous repair during experimental autoimmune encephalomyelitis

Inflammation-mediated neurodegeneration occurs in the acute and the chronic/progressive phases of multiple sclerosis (MS) and its animal model experimental autoimmune encephalomyelitis (EAE). Classically-activated microglia (M1) are key players mediating this process through secretion of soluble factors including nitric oxide (NO) and tumor necrosis factor (TNF). Here, galectin-1, an endogenous glycan-binding protein, was identified as a pivotal regulatory mechanism that limits M1 microglia activation and neurodegeneration, by targeting the activation of p38MAPK- and CREB-dependent pathways and hierarchically controlling downstream pro-inflammatory mediators such as iNOS, TNF and CCL2. Galectin-1 is highly expressed in the acute phase of EAE and its targeted deletion results in pronounced inflammation-induced neurodegeneration. These findings identify an essential role of galectin-1-glycan lattices in tempering microglia activation, brain inflammation and neurodegeneration with critical therapeutic implications in relapsing-remitting and secondary progressive MS.rnMicroglia with distinct phenotypes are implicated in neurotoxicity, neuroprotection, and in modulation of endogenous repair by NSCs. However the precise molecular mechanisms underlying this diversity in fuction are still unknown. rnUsing a model of EAE, transcriptional profiling of isolated SVZ microglia from the acute and chronic disease phases of EAE was performed. The results from this study suggest that microglia exhibit disease phase specific gene expression signatures, that correspond to unique GO functions and genomic networks. These data demonstrate for the first time, distinct transcriptional networks of microglia activation in vivo, that support their role as mediators of injury or repair.

The Isothermal Transformation Curve for S.A.E. 6150

More than 3000 years ago, men began quenching and tem­pering tools to improve their physical properties. The an­cient people found that iron was easier to shape and form in a heated condition. Charcoal was used as the fuel, and when the shaping process was completed, the smiths cooled the piece in the most obvious way, quenching in water. Quite un­intentionally, these people stumbled on the process for im­proving the properties of iron, and the art of blacksmithing began.

Intelligente Werkzeugtechnik- Harmonisieren der Temperatureinflüsse

Der Schlüssel zu Produktivität und Qualität in zahlreichen abformenden Prozessen ist eine optimale Temperierung, die bedingt, dass die Kühl- und Heißkanäle der Oberfläche angepasst sind. Eine Hauptrolle um Durchlaufzeiten und Werkzeugkosten zu senken und die Qualität zu steigern spielt die wirtschaftliche Erwärmung und Kühlung der Teile. Konventionelle Arten der Temperierung können diesen Anforderungen nicht gerecht werden. Der vorliegende Beitrag beschäftigt sich mit zwei neuen Prozesskombinationen: a) Intelligente Werkzeugtechnik mit erfolgreicher industrieller Anwendung, hauptsächlich für Spritz- und Druckgusswerkzeuge. b) Neue Prozessketten für Formen mit geöffnetem Formstück oder RTM (englisch: Resin Transfer Moulding) mit Verwendung der inkrementellen Blechumformung

Intelligente Werkzeugtechnik - Harmonisieren der Temperatureinflüsse

Der Schlüssel zu Produktivität und Qualität in zahlreichen abformenden Prozessen ist eine optimale Temperierung, die bedingt, dass die Kühl- und Heißkanäle der Oberfläche angepasst sind. Eine Hauptrolle um Durchlaufzeiten und Werkzeugkosten zu senken und die Qualität zu steigern spielt die wirtschaftliche Erwärmung und Kühlung der Teile. Konventionelle Arten der Temperierung können diesen Anforderungen nicht gerecht werden. Der vorliegende Beitrag beschäftigt sich mit zwei neuen Prozesskombinationen: a) Intelligente Werkzeugtechnik mit erfolgreicher industrieller Anwendung, hauptsächlich für Spritz- und Druckgusswerkzeuge. b) Neue Prozessketten für Formen mit geöffnetem Formstück oder RTM (englisch: Resin Transfer Moulding) mit Verwendung der inkrementellen Blechumformung.

Has Deregulation Affected Births, Deaths, and Marriages in the U.S. Commercial Banking Industry?

Regulatory change not seen since the Great Depression swept the U.S. banking industry beginning in the early 1980s and culminating with the Interstate Banking and Branching Efficiency Act of 1994. Banking analysts anticipated dramatic consolidation with large numbers of mergers and acquisitions. Less well documented, but equally important, was the continuing entry of new banks, tempering the decline in the overall number of banking institutions. This paper examines whether deregulation affected bank new-charter (birth), failure (death), and merger (marriage) rates during the 1980s and 1990s after controlling for bank performance and state economic activity. We find evidence that intrastate deregulation stimulated births and marriages, but not deaths. Moreover, we find little evidence that interstate deregulation affected births, deaths, or marriages, except that the marriage rate rose after the implementation of the Interstate Banking and Branching Efficiency Act. Finally, pair-wise temporal causality tests among births, deaths, and marriages show that mergers temporally lead new charters and that failures lead mergers (a demonstration effect).

Has Deregulation Affected Births, Deaths, and Marriages in the U.S. Commercial Banking Industry?

Regulatory change not seen since the Great Depression swept the U.S. banking industry beginning in the early 1980s and culminating with the Interstate Banking and Branching Efficiency Act of 1994. Banking analysts anticipated dramatic consolidation with large numbers of mergers and acquisitions. Less well documented, but equally important, was the continuing entry of new banks, tempering the decline in the overall number of banking institutions. This paper examines whether deregulation affected bank new-charter, failure, and merger rates during the 1980s and 1990s after controlling for bank performance and state economic activity. We find evidence that intrastate deregulation stimulated new charters and mergers, but not failures. Moreover, we find little evidence that interstate deregulation affected new charters, failures, or mergers.

Study for the rehabilitation of vernacular architecture with sustainable criteria

This paper assesses rural vernacular heritage established in a warm temperate climate, with dry, hot summer, in São Vicente e Ventosa (SVV), Alentejo, Portugal, and takes part in a larger investigation intending to create rehabilitation guidelines, with sustainable criteria and integration of recent technologies, to improving indoor comfort, and revert the state of deterioration. To further reach this aim, this paper proposes a four phases methodology: data collection, evaluation, simulation and development; a first survey data analysis, including climate data and the adapted comfort climograph and isopleth diagram, allows an understanding of thermal comfort and main constraints in site, as well as suitable bioclimatic strategies for SVV: high thermal inertia for tempering extreme summer conditions and the considerable temperature amplitudes throughout the year, complementarily night ventilation for passive cooling, small-sized window openings and movable shading systems for solar radiation protection. An efficient behaviour in stabilizing indoor temperature swings is revealed.

Coupled Nonlinear Ginzburg-Landau and Mechanics Model for Martensitic Transformations in Polycrystals

Las transformaciones martensíticas (MT) se definen como un cambio en la estructura del cristal para formar una fase coherente o estructuras de dominio multivariante, a partir de la fase inicial con la misma composición, debido a pequeños intercambios o movimientos atómicos cooperativos. En el siglo pasado se han descubierto MT en diferentes materiales partiendo desde los aceros hasta las aleaciones con memoria de forma, materiales cerámicos y materiales inteligentes. Todos muestran propiedades destacables como alta resistencia mecánica, memoria de forma, efectos de superelasticidad o funcionalidades ferroicas como la piezoelectricidad, electro y magneto-estricción etc. Varios modelos/teorías se han desarrollado en sinergia con el desarrollo de la física del estado sólido para entender por qué las MT generan microstructuras muy variadas y ricas que muestran propiedades muy interesantes. Entre las teorías mejor aceptadas se encuentra la Teoría Fenomenológica de la Cristalografía Martensítica (PTMC, por sus siglas en inglés) que predice el plano de hábito y las relaciones de orientación entre la austenita y la martensita. La reinterpretación de la teoría PTMC en un entorno de mecánica del continuo (CM-PTMC) explica la formación de los dominios de estructuras multivariantes, mientras que la teoría de Landau con dinámica de inercia desentraña los mecanismos físicos de los precursores y otros comportamientos dinámicos. La dinámica de red cristalina desvela la reducción de la dureza acústica de las ondas de tensión de red que da lugar a transformaciones débiles de primer orden en el desplazamiento. A pesar de las diferencias entre las teorías estáticas y dinámicas dado su origen en diversas ramas de la física (por ejemplo mecánica continua o dinámica de la red cristalina), estas teorías deben estar inherentemente conectadas entre sí y mostrar ciertos elementos en común en una perspectiva unificada de la física. No obstante las conexiones físicas y diferencias entre las teorías/modelos no se han tratado hasta la fecha, aun siendo de importancia crítica para la mejora de modelos de MT y para el desarrollo integrado de modelos de transformaciones acopladas de desplazamiento-difusión. Por lo tanto, esta tesis comenzó con dos objetivos claros. El primero fue encontrar las conexiones físicas y las diferencias entre los modelos de MT mediante un análisis teórico detallado y simulaciones numéricas. El segundo objetivo fue expandir el modelo de Landau para ser capaz de estudiar MT en policristales, en el caso de transformaciones acopladas de desplazamiento-difusión, y en presencia de dislocaciones. Comenzando con un resumen de los antecedente, en este trabajo se presentan las bases físicas de los modelos actuales de MT. Su capacidad para predecir MT se clarifica mediante el ansis teórico y las simulaciones de la evolución microstructural de MT de cúbicoatetragonal y cúbicoatrigonal en 3D. Este análisis revela que el modelo de Landau con representación irreducible de la deformación transformada es equivalente a la teoría CM-PTMC y al modelo de microelasticidad para predecir los rasgos estáticos durante la MT, pero proporciona una mejor interpretación de los comportamientos dinámicos. Sin embargo, las aplicaciones del modelo de Landau en materiales estructurales están limitadas por su complejidad. Por tanto, el primer resultado de esta tesis es el desarrollo del modelo de Landau nolineal con representación irreducible de deformaciones y de la dinámica de inercia para policristales. La simulación demuestra que el modelo propuesto es consistente fcamente con el CM-PTMC en la descripción estática, y también permite una predicción del diagrama de fases con la clásica forma ’en C’ de los modos de nucleación martensítica activados por la combinación de temperaturas de enfriamiento y las condiciones de tensión aplicada correlacionadas con la transformación de energía de Landau. Posteriomente, el modelo de Landau de MT es integrado con un modelo de transformación de difusión cuantitativa para elucidar la relajación atómica y la difusión de corto alcance de los elementos durante la MT en acero. El modelo de transformaciones de desplazamiento y difusión incluye los efectos de la relajación en borde de grano para la nucleación heterogenea y la evolución espacio-temporal de potenciales de difusión y movilidades químicas mediante el acoplamiento de herramientas de cálculo y bases de datos termo-cinéticos de tipo CALPHAD. El modelo se aplica para estudiar la evolución microstructural de aceros al carbono policristalinos procesados por enfriamiento y partición (Q&P) en 2D. La microstructura y la composición obtenida mediante la simulación se comparan con los datos experimentales disponibles. Los resultados muestran el importante papel jugado por las diferencias en movilidad de difusión entre la fase austenita y martensita en la distibución de carbono en las aceros. Finalmente, un modelo multi-campo es propuesto mediante la incorporación del modelo de dislocación en grano-grueso al modelo desarrollado de Landau para incluir las diferencias morfológicas entre aceros y aleaciones con memoria de forma con la misma ruptura de simetría. La nucleación de dislocaciones, la formación de la martensita ’butterfly’, y la redistribución del carbono después del revenido son bien representadas en las simulaciones 2D del estudio de la evolución de la microstructura en aceros representativos. Con dicha simulación demostramos que incluyendo las dislocaciones obtenemos para dichos aceros, una buena comparación frente a los datos experimentales de la morfología de los bordes de macla, la existencia de austenita retenida dentro de la martensita, etc. Por tanto, basado en un modelo integral y en el desarrollo de códigos durante esta tesis, se ha creado una herramienta de modelización multiescala y multi-campo. Dicha herramienta acopla la termodinámica y la mecánica del continuo en la macroescala con la cinética de difusión y los modelos de campo de fase/Landau en la mesoescala, y también incluye los principios de la cristalografía y de la dinámica de red cristalina en la microescala. ABSTRACT Martensitic transformation (MT), in a narrow sense, is defined as the change of the crystal structure to form a coherent phase, or multi-variant domain structures out from a parent phase with the same composition, by small shuffles or co-operative movements of atoms. Over the past century, MTs have been discovered in different materials from steels to shape memory alloys, ceramics, and smart materials. They lead to remarkable properties such as high strength, shape memory/superelasticity effects or ferroic functionalities including piezoelectricity, electro- and magneto-striction, etc. Various theories/models have been developed, in synergy with development of solid state physics, to understand why MT can generate these rich microstructures and give rise to intriguing properties. Among the well-established theories, the Phenomenological Theory of Martensitic Crystallography (PTMC) is able to predict the habit plane and the orientation relationship between austenite and martensite. The re-interpretation of the PTMC theory within a continuum mechanics framework (CM-PTMC) explains the formation of the multivariant domain structures, while the Landau theory with inertial dynamics unravels the physical origins of precursors and other dynamic behaviors. The crystal lattice dynamics unveils the acoustic softening of the lattice strain waves leading to the weak first-order displacive transformation, etc. Though differing in statics or dynamics due to their origins in different branches of physics (e.g. continuum mechanics or crystal lattice dynamics), these theories should be inherently connected with each other and show certain elements in common within a unified perspective of physics. However, the physical connections and distinctions among the theories/models have not been addressed yet, although they are critical to further improving the models of MTs and to develop integrated models for more complex displacivediffusive coupled transformations. Therefore, this thesis started with two objectives. The first one was to reveal the physical connections and distinctions among the models of MT by means of detailed theoretical analyses and numerical simulations. The second objective was to expand the Landau model to be able to study MTs in polycrystals, in the case of displacive-diffusive coupled transformations, and in the presence of the dislocations. Starting with a comprehensive review, the physical kernels of the current models of MTs are presented. Their ability to predict MTs is clarified by means of theoretical analyses and simulations of the microstructure evolution of cubic-to-tetragonal and cubic-to-trigonal MTs in 3D. This analysis reveals that the Landau model with irreducible representation of the transformed strain is equivalent to the CM-PTMC theory and microelasticity model to predict the static features during MTs but provides better interpretation of the dynamic behaviors. However, the applications of the Landau model in structural materials are limited due its the complexity. Thus, the first result of this thesis is the development of a nonlinear Landau model with irreducible representation of strains and the inertial dynamics for polycrystals. The simulation demonstrates that the updated model is physically consistent with the CM-PTMC in statics, and also permits a prediction of a classical ’C shaped’ phase diagram of martensitic nucleation modes activated by the combination of quenching temperature and applied stress conditions interplaying with Landau transformation energy. Next, the Landau model of MT is further integrated with a quantitative diffusional transformation model to elucidate atomic relaxation and short range diffusion of elements during the MT in steel. The model for displacive-diffusive transformations includes the effects of grain boundary relaxation for heterogeneous nucleation and the spatio-temporal evolution of diffusion potentials and chemical mobility by means of coupling with a CALPHAD-type thermo-kinetic calculation engine and database. The model is applied to study for the microstructure evolution of polycrystalline carbon steels processed by the Quenching and Partitioning (Q&P) process in 2D. The simulated mixed microstructure and composition distribution are compared with available experimental data. The results show that the important role played by the differences in diffusion mobility between austenite and martensite to the partitioning in carbon steels. Finally, a multi-field model is proposed by incorporating the coarse-grained dislocation model to the developed Landau model to account for the morphological difference between steels and shape memory alloys with same symmetry breaking. The dislocation nucleation, the formation of the ’butterfly’ martensite, and the redistribution of carbon after tempering are well represented in the 2D simulations for the microstructure evolution of the representative steels. With the simulation, we demonstrate that the dislocations account for the experimental observation of rough twin boundaries, retained austenite within martensite, etc. in steels. Thus, based on the integrated model and the in-house codes developed in thesis, a preliminary multi-field, multiscale modeling tool is built up. The new tool couples thermodynamics and continuum mechanics at the macroscale with diffusion kinetics and phase field/Landau model at the mesoscale, and also includes the essentials of crystallography and crystal lattice dynamics at microscale.

Determinação da tenacidade à fratura do aço aeronáutico 300M, submetido a diferentes parâmetros de tratamentos térmicos e criogenia, utilizando técnica de corpo cilíndrico com entalhe

Foi realizado estudo sobre a influência da variação de alguns parâmetros do tratamento térmico de têmpera e revenimento, bem como aplicação de criogenia, na tenacidade a fratura do aço aeronáutico 300M, com a utilização da técnica de corpo cilíndrico com entalhe. Primeiramente, realizou-se a construção da curva de transição dúctil frágil, através de ensaio Charpy, para amostras submetidas a três tratamentos térmicos, 1 - Têmpera seguida de Revenimento, 2 - Têmpera seguida de criogenia e revenimento. Não foi observada influência significativa da aplicação da criogenia (tratamento de numero 2) na curva de transição dúctil-frágil em comparação com o tratamento térmico número 1. Em um segundo momento, com o auxílio da técnica de ensaio de corpo cilíndrico com entalhe, realizou-se a medição da tenacidade à fratura das amostras do aço 300M submetido a quatro diferentes tratamento térmicos, Q, V, C e D. Os tratamentos variavam entre si principalmente pela temperatura de austenitização. Os valores de dureza para as amostras submetidas a criogenia (V e D) foram maiores que as dos tratamentos sem criogenia (Q e C), e também apresentaram tenacidade à fratura menor. Com relação à temperatura de austenitização, observou-se que os tratamentos C e D, austenitizados a 980°C, propiciaram a completa dissolução de precipitados primários da matriz, elevando a tenacidade à fratura com relação aos tratamentos realizados na faixa de 870°C, Q e V, superando também os efeitos negativos para a tenacidade à fratura devido ao aumento no tamanho de grão.