A molecular dynamics study and molecular level explanation of pressure dependence of ionic conductivity of potassium chloride in water

Experimental ionic conductivity of different alkali ions in water shows markedly different dependences on pressure. Existing theories such as that of Hubbard-Onsager are unable to explain these dependences on pressure of the ionic conductivity for all ions. We report molecular dynamics investigation of potassium chloride solution at low dilution in water at several pressures between 1 bar and 2 kbar. Two different potential models have been employed. One of the models successfully reproduces the experimentally observed trend in ionic conductivity of K+ ions in water over the 0.001-2 kbar range. We also propose a theoretical explanation, albeit at a qualitative level, to account for the dependence of ionic conductivity on pressure in terms of the previously studied Levitation Effect. It also provides a microscopic picture in terms of the pore network in liquid water.

Consequences of Converting Graded to Action Potentials upon Neural Information Coding and Energy Efficiency

Information is encoded in neural circuits using both graded and action potentials, converting between them within single neurons and successive processing layers. This conversion is accompanied by information loss and a drop in energy efficiency. We investigate the biophysical causes of this loss of information and efficiency by comparing spiking neuron models, containing stochastic voltage-gated Na+ and K+ channels, with generator potential and graded potential models lacking voltage-gated Na+ channels. We identify three causes of information loss in the generator potential that are the by-product of action potential generation: (1) the voltage-gated Na+ channels necessary for action potential generation increase intrinsic noise and (2) introduce non-linearities, and (3) the finite duration of the action potential creates a `footprint' in the generator potential that obscures incoming signals. These three processes reduce information rates by similar to 50% in generator potentials, to similar to 3 times that of spike trains. Both generator potentials and graded potentials consume almost an order of magnitude less energy per second than spike trains. Because of the lower information rates of generator potentials they are substantially less energy efficient than graded potentials. However, both are an order of magnitude more efficient than spike trains due to the higher energy costs and low information content of spikes, emphasizing that there is a two-fold cost of converting analogue to digital; information loss and cost inflation.

Early life history studies of Yellowfin tuna, Thunnus albacares. I. Food selection of Yellowfin tuna, Thunnus albacares, larvae reared in the laboratory. II. Age validation and growth of Yellowfin tuna, Thunnus albacares, larvae reared in the laboratory

English: Food selection of first-feeding yellowfin tuna larvae was studied in the laboratory during October 1992. The larvae were hatched from eggs obtained by natural spawning of yellowfin adults held in sea pens adjacent to Ishigaki Island, Okinawa Prefecture, Japan. The larvae were fed mixed-prey assemblages consisting of size-graded wild zooplankton and cultured rotifers. Yellowfin larvae were found to be selective feeders during the first four days of feeding. Copepod nauplii dominated the diet numerically, by frequency of occurrence and by weight. The relative importance of juvenile and adult copepods (mostly cyclopoids) in the diet increased over the 4-day period. Rotifers, although they comprised 31 to 40 percent of the available forage, comprised less than 2.1 percent of the diet numerically. Prey selection indices were calculated taking into account the relative abundances of prey, the swimming speeds of yellowfin larvae and their prey, and the microscale influence of turbulence on encounter rates. Yellowfin selected for copepod nauplii and against rotifers, and consumed juvenile and adult copepods in proportion to their abundances. Yellowfin larvae may select copepod nauplii and cyclopoid juveniles and adults based on the size and discontinuous swimming motion of these prey. Rotifers may not have been selected because they were larger or because they exhibit a smooth swimming pattern. The best initial diet for the culture of yellowfin larvae may be copepod nauplii and cyclopoid juveniles and adults, due to the size, swimming motion, and nutritional content of these prey. If rotifers alone are fed to yellowfin larvae, the rotifers should be enriched with a nutritional supplement that is high in unsaturated fatty acids. Mouth size of yellowfin larvae increases rapidly within the first few days of feeding, which minimizes limitations on feeding due to prey size. Although yellowfin larvae initiate feeding on relatively small prey, they rapidly acquire the ability to add relatively large, rare prey items to the diet. This mode of feeding may be adaptive for the development of yellowfin larvae, which have high metabolic rates and live in warm mixed-layer habitats of the tropical and subtropical Pacific. Our analysis also indicates a strong potential for the influence of microscale turbulence on the feeding success of yellowfin larvae. --- Experiments designed to validate the periodicity of otolith increments and to examine growth rates of yellowfin tuna larvae were conducted at the Japan Sea-Farming Association’s (JASFA) Yaeyama Experimental Station, Ishigaki Island, Japan, in September 1992. Larvae were reared from eggs spawned by captive yellowfin enclosed in a sea pen in the bay adjacent to Yaeyama Station. Results indicate that the first increment is deposited within 12 hours of hatching in the otoliths of yellowfin larvae, and subsequent growth increments are formed dailyollowing the first 24 hours after hatching r larvae up to 16 days of age. Somatic and otolith gwth ras were examined and compared for yolksac a first-feeding larvae reared at constant water tempatures of 26�and 29°C. Despite the more rapid develo of larvae reared at 29°C, growth rates were nnificaifferent between the two treatments. Howeve to poor survival after the first four days, it was ssible to examine growth rates beyond the onset of first feeding, when growth differences may become more apparent. Somatic and otolith growth were also examined for larvae reared at ambient bay water temperatures during the first 24 days after hatching. timates of laboratory growth rates were come to previously reported values for laboratory-reared yelllarvae of a similar age range, but were lower than growth rates reported for field-collected larvae. The discrepancy between laboratory and field growth rates may be associated with suboptimal growth conditions in the laboratory. Spanish: Durante octubre de 1992 se estudió en el laboratorio la seleccalimento por larvaún aleta amarillmera alimentación. Las larvas provinieron de huevos obtenidosel desove natural de aletas amarillas adultos mantenidos en corrales marinos adyacentes a la Isla Ishigaki, Prefectura de Okinawa (Japón). Se alimentó a las larvas con presas mixtas de zooplancton silvestre clasificado por tamaño y rotíferos cultivados. Se descubrió que las larvas de aleta amarilla se alimentan de forma selectiva durante los cuatro primeros días de alimentación. Los nauplios de copépodo predominaron en la dieta en número, por frecuencia de ocurrencia y por peso. La importancia relativa de copépodos juveniles y adultos (principalmente ciclopoides) en la dieta aumentó en el transcurso del período de 4 días. Los rotíferos, pese a que formaban del 31 al 40% del alimento disponible, respondieron de menos del 2,1% de la dieta en número. Se calcularon índices de selección de presas tomando en cuenta la abundancia relativa de las presas, la velocidad de natación de las larvas de aleta amarilla y de sus presas, y la influencia a microescala de la turbulencia sobre las tasas de encuentro. Los aletas amarillas seleccionaron a favor de nauplios de copépodo y en contra de los rotíferos, y consumieron copépodos juveniles y adultos en proporción a su abundancia. Es posible que las larvas de aleta amarilla seleccionen nauplios de copépodo y ciclopoides juveniles y adultos con base en el tamaño y movimiento de natación discontinuo de estas presas. Es posible que no se hayan seleccionado los rotíferos a raíz de su mayor tamaño o su patrón continuo de natación. Es posible que la mejor dieta inicial para el cultivo de larvas de aleta amarilla sea nauplios de copépodo y ciclopoides juveniles y adultos, debido al tamaño, movimiento de natación, y contenido nutritivo de estas presas. Si se alimenta a las larvas de aleta amarilla con rotíferos solamente, se debería enriquecerlos con un suplemento nutritivo rico en ácidos grasos no saturados. El tamaño de la boca de las larvas de aleta amarilla aumenta rápidamente en los primeros pocos días de alimentación, reduciendo la limitación de la alimentación debida al tamaño de la presa. Pese a que las larvas de aleta amarilla inician su alimentación con presas relativamente pequeñas, se hacen rápidamente capaces de añadir presas relativamente grandes y poco comunes a la dieta. Este modo de alimentación podría ser adaptivo para el desarrollo de larvas de aleta amarilla, que tienen tasa metabólicas altas y viven en hábitats cálidos en la capa de mezcla en el Pacífico tropical y subtropical. Nuestro análisis indica también que la influencia de turbulencia a microescala es potencialmente importante para el éxito de la alimentación de las larvas de aleta amarilla. --- En septiembre de 1992 se realizaron en la Estación Experimental Yaeyama de la Japan Sea- Farming Association (JASFA) en la Isla Ishigaki (Japón) experimentos diseñados para validar la periodicidad de los incrementos en los otolitos y para examinar las tasas de crecimiento de las larvas de atún aleta amarilla. Se criaron las larvas de huevos puestos por aletas amarillas cautivos en un corral marino en la bahía adyacente a la Estación Yaeyama. Los resultados indican que el primer incremento es depositado menos de 12 horas después de la eclosión en los otolitos de las larvas de aleta amarilla, y que los incrementos de crecimiento subsiguientes son formados a diario a partir de las primeras 24 horas después de la eclosión en larvas de hasta 16 días de edad. Se examinaron y compararon las tasas de crecimiento somático y de los otolitos en larvas en las etapas de saco vitelino y de primera alimentación criadas en aguas de temperatura constante entre 26°C y 29°C. A pesar del desarrollo más rápido de las larvas criadas a 29°C, las tasas de crecimiento no fueron significativamente diferentes entre los dos tratamientos. Debido a la mala supervivencia a partir de los cuatro primeros días, no fue posibación, uando las diferencias en el crecimiento podrían hacerse más aparentes. Se examinó también el crecimiento somático y de los otolitos para larvas criadas en temperaturas de agua ambiental en la bahía durante los 24 días inmediatamente después de la eclosión. Nuestras estimaciones de las tasas de crecimiento en el laboratorio fueron comparables a valores reportados previamente para larvas de aleta amarilla de edades similares criadas en el laboratorio, pero más bajas que las tasas de crecimiento reportadas para larvas capturadas en el mar. La discrepancia entre las tasas de crecimiento en el laboratorio y el mar podría estar asociada con condiciones subóptimas de crecimiento en el lab

MCMC-based tracking and identification of leaders in groups

We present a novel framework for identifying and tracking dominant agents in groups. Our proposed approach relies on a causality detection scheme that is capable of ranking agents with respect to their contribution in shaping the system's collective behaviour based exclusively on the agents' observed trajectories. Further, the reasoning paradigm is made robust to multiple emissions and clutter by employing a class of recently introduced Markov chain Monte Carlo-based group tracking methods. Examples are provided that demonstrate the strong potential of the proposed scheme in identifying actual leaders in swarms of interacting agents and moving crowds. © 2011 IEEE.

同源四倍体与二倍体水稻的遗传差异及产量、品质性状研究

本文以中国科学院成都生物研究所培育的同源四倍体水稻和二倍体水稻为材料，进行遗传差异及产量、品质性状的研究：1、以二倍体水稻为对照，研究了同源四倍体水稻在2004 年和2005 年的结实情况。结果同源四倍体的花粉育性、结实率均不同程度下降，尤其低代材料更是大幅度下降。F 检验表明，同源四倍体不同个体间的各产量性状均差异显著，说明其具有很大的遗传改良潜力。从1996 年到2005 年对部分同源四倍体水稻进行了连续选择改良，T 检验表明经过9 年的选择改良，其结实率显著提高。本文还对同源四倍体水稻各产量性状间的相关性进行了分析,结果结实率与花粉育性、穗着粒数、穗实粒数极显著相关；理论产量与花粉育性、有效穗数、穗着粒数、穗实粒数、结实率及千粒重极显著相关。i2、用(CT)n 微卫星标记和PCR-Acc Ι分子标记对40 份同源四倍体和14 份二倍体水稻Wx 基因进行研究。结果，(CT)n 微卫星标记检测，Wx 基因呈Wx1、Wx2 和Wx3 3 种多态性；PCR-Acc Ι 检测，Wx 基因表现为G-型和T-型。测定稻米直链淀粉含量(AC)、胶稠度(GC)和糊化温度(GT)，并探讨其与Wx 基因的关系，结果，二倍体和同源四倍体水稻均存在：Wx 基因型相同，AC 差异较小，Wx 基因型不同时，AC 差异较大，Wx1 基因型品种AC 最高， Wx2 基因型品种AC 次之，Wx3 基因型品种AC 最低；基因型相同时，同源四倍体AC 低于二倍体；同源四倍体与对应二倍体间，Wx 基因型相同时，AC 差异很小；而Wx 基因型发生变异时，AC 差异很大。同时，进行相关性分析，结果二倍体和四倍体水稻均存在AC、GC 与Wx 基因密切相关；而GT 与Wx 基因相关不显著。综合分析，(CT)n微卫星标记与PCR-Acc Ι 分子标记检测的相关系数为0.842，呈极显著正相关，可以将其结合起来进行同源四倍体新品种的选育和改良。3、利用RAPD 技术，对同源四倍体和二倍体水稻的遗传差异进行分析。17条引物在同源四倍体中扩增出178 条带（PPB＝81.5%），在二倍体中扩增出173条带（PPB＝76.3%）；同源四倍体和二倍体的Shannon 遗传多样性指数分别为0.4848 和0.4679，多态信息量分别为0.3301 和0.3216，遗传距离分别为0.3572和0.3460；同源四倍体与其对应二倍体间遗传距离为0.1914-0.4633，平均为0.2914。表明同源四倍体的遗传多样性高于二倍体，且同源四倍体与其二倍体之间存在较大的遗传差异，这些将为水稻品种改良和新品种选育提供科学依据。上述产量、品质性状及遗传差异分析的结果，不仅有利于加快同源四倍体水稻的遗传改良进程，而且为进一步研究、利用同源四倍体水稻奠定了初步基础。 AbstractStudy on genetic diversity, yield characters and quality traitsof autotetraploid and diploid riceLiu Yuhua (Botany)Directed by Associate Prof. Tu ShengbinIn this study, diploid and autotetraploid rice, which were cultivated in ChengduInstitute of Biology were analyzed in genetic diversity, yield characters and qualitytraits.In the study, 2 diploid and 29 autotetraploid rice(2n=4x=48) materials, including4 preliminary and 25 advanced generation, were investigated for yield characters.Compared with diploid check, the pollen fertility and seed set of autotetraploiddeclined dramatically, especially in preliminary generation. F-test indicated that therewere remarkable differences among different varieties, showing that autotetraploidmaterials had strong potential for improvement. From 1996 to 2005, someautotetraploid rice had been selected and improved. T-test showed that seed setincreased obviously. The relationships among yield characters of autotetraploid ricewere analyzed. Seed set was strongly correlated with pollen fertility, total grainnumber per panicle and productive grain number per panicle; theoretical yield wasstrongly correlated with pollen fertility, productive panicle number per plant, totalgrain number per panicle, productive grain number, seed set and 1000-grain weight.Wx genotypes of 40 autotetraploid rice and 14 diploid rice were tested by usingthe (CT)n microsatellite marker and a cleaved amplified polymorphic sequence(CAPS) molecular marker named PCR-Acc Ι. Three microsatellite alleles wereproduced, i.e. Wx1, Wx2 and Wx3 both in autotetraploid and in diploid rice.Comparatively, PCR- Acc Ι molecular marker produced two genotypes, G-type andT-type for both autotetraploid and diploid rice. In this study, amylose content (AC), gel of consistency (GC) and gelatinization temperature (GT) of rice grain weremeasured and their relationships with Wx alleles were analyzed. The results showedthat variation of AC between autotetraploid and diploid rice was small when they hadthe same Wx genotype. However, variation of AC turned to be large when the Wxgenotypes were different. Actually, AC met the maximum value in Wx1 varieties andWx2 varieties the middle and Wx3 varieties the minimum. And AC was lower inautotetraploid than in diploid. Correlation analysis was done in this experiment. ACand GC of rice grain were probably controlled by Wx gene or other gene whoselocation was strictly linked to Wx gene, while GT of rice was not. The correlationcoefficient between Wx genotypes which revealed by (CT)n microsatellite marker andPCR-Acc Ι molecular marker was 0.842 with significant level. That revealed aconsistent result between the two types of markers. So it was possible to utilize boththe two types of markers to select and promote germplasm of autotetraploid rice.RAPD molecular markers were used to analyze the genetic diversity betweendiploid and autotetraploid rice. 178 repeatable bands were detected through 17 RAPDprimers with percentage of polymorphic bands was 81.5% in autotetraploid rice while173 repeatable bands were detected with percentage of polymorphic bands was 76.3%in diploid rice. According to the measurement of Shannon index, polymorphicinformation content and genetic distance, genetic diversity of autotetraploid was on ahigher level, genetic variation between autotetraploid and diploid rice was relativelyhigh. All these contributed to the genetic selection and improvement in rice breeding.As mentioned above, the results are not only helpful to promote the process ofrice improvement, but also to confirm the basic for further study of autotetraploid rice.

人载脂蛋白APOA5的克隆表达纯化及相互作用蛋白研究

人类的载脂蛋白A5（apolipoprotein A5，APOA5）是一个新近发现的载脂蛋白家族成员。它在血浆中的含量比其他载脂蛋白低1-2个数量级，但能显著影响血浆三酰甘油水平，对血脂代谢具有重要意义，可以作为降血脂药物治疗中一个强有力的潜在靶标。 由于APOA5在血浆中含量低，直接从血浆中分离纯化很困难，国内一直没有报道简易可靠的纯化方法。为进一步研究APOA5的生物学特性，探讨其与TG代谢中的其它关键成分之间的相互关系，揭示其在脂类代谢相关疾病中的重要地位，必须有大量的蛋白和抗体用于基础研究。因此本研究首先利用基因工程技术，诱导表达纯化APOA5蛋白，免疫动物制备多克隆抗体，为进一步研究人肝脏细胞中APOA5的相互作用蛋白，研究APOA5蛋白在肝脏细胞中的功能奠定基础。 为了深入研究APOA5在肝脏中如何行使功能，我们采用细菌双杂交技术寻找与APOA5相互作用的蛋白因子。并采用Pull-down技术，免疫荧光及免疫共沉淀技术进一步确证其在体外和体内的相互作用关系，为进一步阐明APOA5在体内的生理功能提供了新的线索。 第一部分 APOA5基因的克隆、原核表达、纯化及其多克隆抗体的制备 本研究首先应用基因克隆技术，从人肝癌细胞系SMMC-7721的cDNA中扩增出1.1 kb的ApoA5基因全长序列。然后将其克隆至表达载体pThioHisD，构建原核表达载体pTH-APOA5。该重组质粒转化至大肠杆菌 BL21（DE3），成功实现人APOA5融合蛋白在大肠杆菌中的表达。经发酵得到高效表达的融合蛋白。 融合蛋白在 IPGT 诱导下以包涵体的形式大量表达。利用融合蛋白上的一段组氨酸序列，用镍离子亲和柱进行纯化和复性后，获得较高纯度的人APOA5融合蛋白。利用该融合蛋白免疫新西兰大耳白兔，获得了高效价的兔抗人APOA5多克隆抗体，Western Blot结果显示此多克隆抗体与APOA5特异性结合。 第二部分 细菌双杂交筛选与APOA5相互作用的蛋白 本实验首先构建了pBT-APOA5重组质粒，经双酶切、PCR和测序鉴定证明重组诱饵质粒构建成功，并进行了表达、自激活鉴定。Western Blot鉴定证实报告菌株中表达了分子量为 68 kD左右的重组融合蛋白，与预测的分子量APOA5（41 kD）/lamda cI （27 kD）一致。自激活实验证明诱饵蛋白不能单独激活报告基因，可用于筛选人肝脏cDNA文库。经过双重抗性筛选和回复筛选，分离出10个阳性克隆。对结果进行生物信息学分析，得到7个与APOA5相互作用的蛋白，其中BI1为细胞凋亡调节因子；ATP6、CYTB、ND2、COX-1为线粒体表达蛋白； ALB、TTR为血清蛋白。 第三部分 APOA5与BI1相互作用的确证 首先构建了BI1的原核表达载体pGEX-5X-3-BI1，利用Pull-down实验检测了APOA5与BI1在体外具有相互作用。然后构建了BI1的真核表达载体pCDNA3.1-HA-BI1和APOA5的真核表达载体pCDNA3.1-APOA5，并验证其表达。通过免疫荧光细胞内共定位研究发现，靶蛋白APOA5主要分布于胞浆，与BI1在HEK293细胞有共定位，即APOA5与BI1存在相互作用的可能。最后利用免疫共沉淀手段，在HEK293细胞中确证了靶蛋白APOA5与BI1在体内的相互作用。 上述研究结果，为深入研究APOA5在体内的生物学功能提供了新的思路。 Apolipoprotein A5 (APOA5) is a newly discovered protein belongs to apolipoprotein family. APOA5’s concentration is 1-2 orders of magnitude lower than other apolipoproteins in the circulation. APOA5 significantly affected plasma triglyceride levels, which is important on lipid metabolism. APOA5 has strong potential to be used as a hypolipidemic drug target. Large amount of APOA5 protein and antibodies are needed in basic research, such as biological characteristics study of the APOA5, its relationship with other key components in TG metabolism, its role played in Lipid metabolism-related diseases. Due to its low concentration in plasma, separation and purification of APOA5 from the plasma is very difficult. Until now no report on simple and reliable method for purification has been published in China. In this study, we firstly got APOA5 recombinant protein using genetic engineering technology. The purified recombinant protein was used to immunize rabbits to get antiserum. It is important for further study of the APOA5 protein-interacting protein. And it lays the foundation for studing APOA5 function in liver. In order to study APOA5 function in liver, we used bacterial two-hybrid technology to find the APOA5 protein interactor. Pull-down, immunofluorescence and immunoprecipitation techniques were used to further confirm the interaction between APOA5 with its interactor in vitro and in vivo. All of these stdudies provided new clues on its physiological functions in vivo. Part I: Cloning, prokaryotic expression, purification and polyclonal antibody preparation of APOA5 First of all, we amplified APOA5 CDS sequence from the human hepatoma cell line SMMC-7721, and subcloned into Expression vector pThioHisD, and got the recombinants named pTH-APOA5. The plasmid was transformed to BL21 (DE3). E. coli BL21(DE3) cells bearing the pTH-APOA5 plasmid were cultured and APOA5 protein synthesis was induced by the addition of IPTG. Recombinant protein was expression in the form of inclusion. Inclusion bodies were dissolved in phosphate-buffered saline containing 8 M urea and 40 mM imidazole, then applied to a Ni2+ affinity column, and were eluted in a buffer containing 4 M urea and 200 mM imidazole. Fractions containing the APOA5 protein were pooled and dialyzed against buffer containing phosphate-buffered saline. Antiserum to recombinant human APOA5 was generated by immuning rabbit. Western Blot showed that this antiserum specific binding with APOA5. Part II Two-hybrid system screening protein interactions with the APOA5 The coding sequence of human APOA5 was amplified using synthetic oligonucleotide primers from pTH-APOA5 vector and was subcloned into the pBT plasmidc to yield pBT-APOA5 vector. DNA sequencing was performed to verify that no unwanted mutations occurred during the process of plasmid vector construction. We verified recombinant protein expression and tested self-activation by pBT-APOA5 prior to screening. Western Blot verified inducing a 68 kD band, consistent with the predicted molecular weight (APOA5 41 kD, lamda cI 27 kD). pBT-APOA5 can be used for screening human liver cDNA library because it can not self-activation. Totally 10 positive clones were isolated. The nucleotide sequence of the positive clones were determined and compared to NCBI nucleotide sequence databases. We got 7 protein which interact with APOA5, included BI1(Apoptosis regulator); ATP6, CYTB, ND2, COX-1(Mitochondrial protein) and ALB, TTR(Serum protein). Part III Confirming of interaction between APOA5 with BI1 pGEX-5X-3-BI1 vector was subcloned at first. Pull-down experiments were used to detect the interaction between APOA5 with BI1 in vitro. Later, pCDNA3.1-HA-BI1 and pCDNA3.1-APOA5 were subcloned. Through immunofluorescence co-localization study, we found APOA5 mainly distributed in the cytoplasm. APOA5 is co-localization with BI1 in HEK293 cells. Finally, we verified interaction between APOA5 with BI1 in vivo through immunoprecipitation.

高温高压下H2O-CH4体系PVTx性质的分子动力学模拟研究

Geological fluids are important components in the earth system. To study thephysical chemistry properties and the evolution of fluid system turns out to be one of the most challenging issues in geosciences. Besides the conventional experimental approaches and theoretical or semi-theoretical modeling, molecular level computer simulation(MLCS) emerges as an alternative tool to quantificationally study the physico-chemical properties of fluid under extreme conditions in order to find out the characteristics and interaction of geological fluids in and around earth. Based on our previous study of the intermolecular potential for pure H2O and thestrict evaluation of the competitive potential models for pure CH4 and the ab initio fitting potential surface across H2O-CH4 molecules in this study, we carried out more than two thousand molecular dynamics simulations for the PVTx properties of pure CH4 and the H2O-CH4 mixtures. Comparison of 1941 simulations with experimental PVT data for pure CH4 shows an average deviation of 0.96% and a maximum deviation of 2.82%. The comparison of the results of 519 simulations of the mixtures with the experimental measurements reveals that the PVTx properties of the H2O-CH4 mixtures generally agree with the extensive experimental data with an average deviation of 0.83% and 4% in maximum, which is equivalent to the experimental uncertainty. Moreover, the maximum deviation between the experimental data and the simulation results decreases to about 2% as temperature and pressure increase,indicating that the high accuracy of the simulation is well retained in the high temperature and pressure region. After the validation of the simulation method and the intermolecular potential models, we systematically simulated the PVTx properties of this binary system from 673 K and 0.05 GPa to 2573 K and 10 GPa. In order to integrate all the simulation results and the experimental data for the calculation of thermodynamic properties, an equation of state (EOS) is developed for the H2O-CH4 system covering 673 to 2573 K and 0.01 to 10 GPa. Isochores for compositions < 4 mol% CH4 up to 773 K and 600 MPa are also determined in this thesis.

Magnetic resonance water proton relaxation in protein solutions and tissue: T(1rho) dispersion characterization.

BACKGROUND: Image contrast in clinical MRI is often determined by differences in tissue water proton relaxation behavior. However, many aspects of water proton relaxation in complex biological media, such as protein solutions and tissue are not well understood, perhaps due to the limited empirical data. PRINCIPAL FINDINGS: Water proton T(1), T(2), and T(1rho) of protein solutions and tissue were measured systematically under multiple conditions. Crosslinking or aggregation of protein decreased T(2) and T(1rho), but did not change high-field T(1). T(1rho) dispersion profiles were similar for crosslinked protein solutions, myocardial tissue, and cartilage, and exhibited power law behavior with T(1rho)(0) values that closely approximated T(2). The T(1rho) dispersion of mobile protein solutions was flat above 5 kHz, but showed a steep curve below 5 kHz that was sensitive to changes in pH. The T(1rho) dispersion of crosslinked BSA and cartilage in DMSO solvent closely resembled that of water solvent above 5 kHz but showed decreased dispersion below 5 kHz. CONCLUSIONS: Proton exchange is a minor pathway for tissue T(1) and T(1rho) relaxation above 5 kHz. Potential models for relaxation are discussed, however the same molecular mechanism appears to be responsible across 5 decades of frequencies from T(1rho) to T(1).

Proton ordering energetics in ice phases

Results from first-principles calculations on the subtle energetics of proton ordering in ice phases are shown only to depend on the electrostatic components of the total energy. Proton ordered ice phases can therefore be predicted using electronic structure methods or a tailored potential model. However, analysis of the electron density reveals that high order multipole components, up to hexadecapole, are needed to adequately capture total energy differences between proton ordered and disordered phases. This suggests that current potential models may be unable to reproduce the position of proton ordered ice phases in the phase diagram without extensions to describe high order electrostatics. (c) 2006 Elsevier B.V. All rights reserved.

Dynamic identification of building structures: new strategies:Meccanica dei materiali e delle strutture

In this paper the evolution of a time domain dynamic identification technique based on a statistical moment approach is presented. This technique can be used in the case of structures under base random excitations in the linear state and in the non linear one. By applying Itoˆ stochastic calculus, special algebraic equations can be obtained depending on the statistical moments of the response of the system to be identified. Such equations can be used for the dynamic identification of the mechanical parameters and of the input. The above equations, differently from many techniques in the literature, show the possibility of obtaining the identification of the dissipation characteristics independently from the input. Through the paper the first formulation of this technique, applicable to non linear systems, based on the use of a restricted class of the potential models, is presented. Further a second formulation of the technique in object, applicable to each kind of linear systems and based on the use of a class of linear models, characterized by a mass proportional damping matrix, is described.

Identifying oil species in oil mixtures

Detection of adulteration of non-processed vegetable oil with lesser value seed oils (classic example is hazelnut in virgin olive oil) has been in the centre of scientific attention for many years and several chemical methods were proposed. The recent EC Regulation 1169/2011, however, introduces necessity for different analytical method in a more complicated matrix. From the end of 2014, food businesses required to declare the composition of the refined oil mixture in the food product label. This creates a gap since there is no analytical method currently available to perform such analysis. In the first phase the work focused on 100% oil blends of various oil species of palm oil (and derivatives), sunflower and rapeseed oil before expanding to foodstuffs. Chromatographic methods remain highly relevant although suffer from various limitations which derive from natural compositional variation. Modern multivariate techniques based on machine learning algorithms, however, when applied in FTIR, Raman spectroscopic data have a strong potential in tackling the problem.

Repeatability and reliability of new air and water permeability tests for assessing the durability of high-performance concretes

This paper reports on the accuracy of new test methods developed to measure the air and water permeability of high-performance concretes (HPCs). Five representative HPC and one normal concrete (NC) mixtures were tested to estimate both repeatability and reliability of the proposed methods. Repeatability acceptance was adjudged using values of signal-noise ratio (SNR) and discrimination ratio (DR), and reliability was investigated by comparing against standard laboratory-based test methods (i.e., the RILEM gas permeability test and BS EN water penetration test). With SNR and DR values satisfying recommended criteria, it was concluded that test repeatability error has no significant influence on results. In addition, the research confirmed strong positive relationships between the proposed test methods and existing standard permeability assessment techniques. Based on these findings, the proposed test methods show strong potential to become recognized as international methods for determining the permeability of HPCs.

The role of crowdfunding in promoting entrepreneurship

Crowdfunding is a collaborative initiative, usually via internet, where people network to collectively raise funds in order to invest in and support projects delivered by other people or organizations. Tools such as crowdfunding are born and thrive in a grassroots environment, with a strong potential to positively disrupt the entrepreneurial generation setting and grow to a position of significant relevance in society, namely at a time when alternatives to traditional forms of finance are welcome and the technology to deliver them is abundant. Entrepreneurship is the act of transforming ideas and projects into economic products or services. Entrepreneurship related to starting new businesses is better known as start‐up ventures. Entrepreneurs face a series of challenges, from idea conception and business plan design, to obtaining finance, promoting new products and services, generating revenues and profits and generally growing and sustaining a business for the long‐run. These challenges can be overwhelming, namely in the start‐up phase of a new venture, leaving several ideas on paper without them having a chance to “grow legs and walk”. This paper and its analysis offer important insights about the contribution of crowdfunding to facilitate the attainment of critical factors for successful entrepreneurship. With extensive use of real practical examples, leveraging previous analytical studies of other crowdfunding implications and reviewing expert literature, by interviewing entrepreneurs, crowdfunding platform owners and by benefitting from hands on experience of working in such an organization, we intend to clarify the impact of crowdfunding in what we considered to be 7 key entrepreneurial requirements detailed further in the introduction section and later in the body of the paper. The findings have implications for entrepreneurs, naturally, and for business generation theory, extending current entrepreneurial guidelines with innovative tools and methodologies capable of sustaining successful ventures in a newly highlighted cooperative world. We live in innovative times where the channels for the transfer of funds and resources suffer disruptive changes with the potential to significantly improve the ability to generate new initiatives for the well‐being of entrepreneurs and all related communities.

Molecular dynamics calculation of mean square displacement in alkali metals and rare gas solids and comparison with lattice dynamics

Molec ul ar dynamics calculations of the mean sq ua re displacement have been carried out for the alkali metals Na, K and Cs and for an fcc nearest neighbour Lennard-Jones model applicable to rare gas solids. The computations for the alkalis were done for several temperatures for temperature vol ume a swell as for the the ze r 0 pressure ze ro zero pressure volume corresponding to each temperature. In the fcc case, results were obtained for a wide range of both the temperature and density. Lattice dynamics calculations of the harmonic and the lowe s t order anharmonic (cubic and quartic) contributions to the mean square displacement were performed for the same potential models as in the molecular dynamics calculations. The Brillouin zone sums arising in the harmonic and the quartic terms were computed for very large numbers of points in q-space, and were extrapolated to obtain results ful converged with respect to the number of points in the Brillouin zone.An excellent agreement between the lattice dynamics results was observed molecular dynamics and in the case of all the alkali metals, e~ept for the zero pressure case of CSt where the difference is about 15 % near the melting temperature. It was concluded that for the alkalis, the lowest order perturbation theory works well even at temperat ures close to the melting temperat ure. For the fcc nearest neighbour model it was found that the number of particles (256) used for the molecular dynamics calculations, produces a result which is somewhere between 10 and 20 % smaller than the value converged with respect to the number of particles. However, the general temperature dependence of the mean square displacement is the same in molecular dynamics and lattice dynamics for all temperatures at the highest densities examined, while at higher volumes and high temperatures the results diverge. This indicates the importance of the higher order (eg. ~* ) perturbation theory contributions in these cases.

The female coach as a role model for personal growth and development to the female adolescent athlete

Research interest on the topic of female coaches as role models has recently emerged in the coaching literature. Social learning theory (Bandura, 1963; 1977; 1986) has also emerged as an essential framework in explaining learning through modeling. Previous research has examined the coach as a role model, as well as gender differences between coaches. Several authors, with several different conclusions, have studied the significance of gender as an influencer in role modeling. Whitaker and Molstad in 1988 conducted a study focusing on the coach as a role model. What they found was when they combined the results of high school and college aged athletes; the female coach was considered to be a superior role model. The current research used a social learning theory framework to examine the benefits and intricacies of the modeling relationship between female adolescent athletes and influential female coaches. To accomplish this task, the formative experiences of thirteen adolescent female athletes were examined. Each athlete was interviewed, with each semi-structured interview focusing on extracting the salient features of a coach that the athlete identified as being the most influential in her personal development. The data from these interviews were quaHtatively analyzed using case studies. From case studies, a template emerges in which the coach/athlete relationship can be seen as an essential construct in which caring and strong role models can have lasting effects on the lives, values, and successes of adolescent female athletes.