Quality evaluation of tandem mass spectral libraries

Tandem mass spectral libraries are gaining more and more importance for the identification of unknowns in different fields of research, including metabolomics, forensics, toxicology, and environmental analysis. Particularly, the recent invention of reliable, robust, and transferable libraries has increased the general acceptance of these tools. Herein, we report on results obtained from thorough evaluation of the match reliabilities of two tandem mass spectral libraries: the MSforID library established by the Oberacher group in Innsbruck and the Weinmann library established by the Weinmann group in Freiburg. Three different experiments were performed: (1) Spectra of the libraries were searched against their corresponding library after excluding either this single compound-specific spectrum or all compound-specific spectra prior to searching; (2) the libraries were searched against each other using either library as reference set or sample set; (3) spectra acquired on different mass spectrometric instruments were matched to both libraries. Almost 13,000 tandem mass spectra were included in this study. The MSforID search algorithm was used for spectral matching. Statistical evaluation of the library search results revealed that principally both libraries enable the sensitive and specific identification of compounds. Due to higher mass accuracy of the QqTOF compared with the QTrap instrument, matches to the MSforID library were more reliable when comparing spectra with both libraries. Furthermore, only the MSforID library was shown to be efficiently transferable to different kinds of tandem mass spectrometers, including "tandem-in-time" instruments; this is due to the coverage of a large range of different collision energy settings-including the very low range-which is an outstanding characteristics of the MSforID library.

Evaluation and comparison of cartilage repair tissue of the patella and medial femoral condyle by using morphological MRI and biochemical zonal T2 mapping

The objective of this study was to use advanced MR techniques to evaluate and compare cartilage repair tissue after matrix-associated autologous chondrocyte transplantation (MACT) in the patella and medial femoral condyle (MFC). Thirty-four patients treated with MACT underwent 3-T MRI of the knee. Patients were treated on either patella (n = 17) or MFC (n = 17) cartilage and were matched by age and postoperative interval. For morphological evaluation, the MR observation of cartilage repair tissue (MOCART) score was used, with a 3D-True-FISP sequence. For biochemical assessment, T2 mapping was prepared by using a multiecho spin-echo approach with particular attention to the cartilage zonal structure. Statistical evaluation was done by analyses of variance. The MOCART score showed no significant differences between the patella and MFC (p > or = 0.05). With regard to biochemical T2 relaxation, higher T2 values were found throughout the MFC (p < 0.05). The zonal increase in T2 values from deep to superficial was significant for control cartilage (p < 0.001) and cartilage repair tissue (p < 0.05), with an earlier onset in the repair tissue of the patella. The assessment of cartilage repair tissue of the patella and MFC afforded comparable morphological results, whereas biochemical T2 values showed differences, possibly due to dissimilar biomechanical loading conditions.

Hydrostratigraphic analysis of the MADE site with full-resolution GPR and direct-push hydraulic profiling

Full-resolution 3D Ground-Penetrating Radar (GPR) data were combined with high-resolution hydraulic conductivity (K) data from vertical Direct-Push (DP) profiles to characterize a portion of the highly heterogeneous MAcro Dispersion Experiment (MADE) site. This is an important first step to better understand the influence of aquifer heterogeneities on observed anomalous transport. Statistical evaluation of DP data indicates non-normal distributions that have much higher similarity within each GPR facies than between facies. The analysis of GPR and DP data provides high-resolution estimates of the 3D geometry of hydrostratigraphic zones, which can then be populated with stochastic K fields. The lack of such estimates has been a significant limitation for testing and parameterizing a range of novel transport theories at sites where the traditional advection-dispersion model has proven inadequate.

Exclusion of angiotensinogen gene in molecular basis of human hypertension: Sibpair linkage and association analyses in Australian anglo-caucasians

Linkage with essential hypertension has been claimed for a microsatellite marker near the angiotensinogen gene (AGT; chromosome 1q42), as has association for the AGT variants M235T, G(-6)A and A(-20)C. To more rigorously evaluate AGT as a candidate gene for hypertension we performed sibpair analysis with multiple microsatellite markers surrounding this locus and using more sophisticated analysis programs. We also performed an association study of the AGT variants in unrelated subjects with a strong family history (two affected parents). For the linkage study, single and multiplex polymerase chain reaction (PCRs) and automated genescan analysis were conducted on DNA from 175 Australian Anglo-Celtic Caucasian hypertensives for the following markers: D1S2880-(2.1 cM)-D1S213-(2.8 cM)-D1S251-(6.5 cM)-AGT-(2.0 cM) -D1S235. Statistical evaluation of genotype data by nonparametric methods resulted in the following scores: Single-point analysis - SPLINK, P > 0.18; APM method, P > 0.25; ASPEX, MLOD < 0.28; SIB-PAIR, P > 0. 24; Multipoint analysis - MAPMAKER/SIBS, MLOD < 0.24; GENEHUNTER, P > 0.35. Exclusion scores of Lod -4.1 to -5.1 were obtained for these markers using MAPMAKER/SIBS for a lambda(s) of 1.6. The association study of G(-6)A, A(-20)C and M235T variants in 111 hypertensives with strong family history and 190 normotensives with no family history showed significant linkage disequilibrium between particular haplotypes, but we could find no association with hypertension. The present study therefore excludes AGT in the etiology of hypertension, at least in the population of Australian Anglo-Celtic Caucasians studied.

Cereulide producing B. cereus and amylosin producing B. subtilis and B. mojavensis : characterization of strains and toxigenicities

B. cereus is one of the most frequent occurring bacteria in foods . It produces several heat-labile enterotoxins and one stable non-protein toxin, cereulide (emetic), which may be pre-formed in food. Cereulide is a heat stable peptide whose structure and mechanism of action were in the past decade elucidated. Until this work, the detection of cereulide was done by biological assays. With my mentors, I developed the first quantitative chemical assay for cereulide. The assay is based on liquid chromatography (HPLC) combined with ion trap mass spectrometry and the calibration is done with valinomycin and purified cereulide. To detect and quantitate valinomycin and cereulide, their [NH4+] adducts, m/z 1128.9 and m/z 1171 respectively, were used. This was a breakthrough in the cereulide research and became a very powerful tool of investigation. This tool made it possible to prove for the first time that the toxin produced by B. cereus in heat-treated food caused human illness. Until this thesis work (Paper II), cereulide producing B. cereus strains were believed to represent a homogenous group of clonal strains. The cereulide producing strains investigated in those studies originated mostly from food poisoning incidents. We used strains of many origins and analyzed them using a polyphasic approach. We found that the cereulide producing B. cereus strains are genetically and biologically more diverse than assumed in earlier studies. The strains diverge in the adenylate kinase (adk) gene (two sequence types), in ribopatterns obtained with EcoRI and PvuII (three patterns), tyrosin decomposition, haemolysis and lecithine hydrolysis (two phenotypes). Our study was the first demonstration of diversity within the cereulide producing strains of B. cereus. To manage the risk for cereulide production in food, understanding is needed on factors that may upregulate cereulide production in a given food matrix and the environmental factors affecting it. As a contribution towards this direction, we adjusted the growth environment and measured the cereulide production by strains selected for diversity. The temperature range where cereulide is produced was narrower than that for growth for most of the producer strains. Most cereulide was by most strains produced at room temperature (20 - 23ºC). Exceptions to this were two faecal isolates which produced the same amount of cereulide from 23 ºC up until 39ºC. We also found that at 37º C the choice of growth media for cereulide production differed from that at the room temperature. The food composition and temperature may thus be a key for understanding cereulide production in foods as well as in the gut. We investigated the contents of [K+], [Na+] and amino acids of six growth media. Statistical evaluation indicated a significant positive correlation between the ratio [K+]:[Na+] and the production of cereulide, but only when the concentrations of glycine and [Na+] were constant. Of the amino acids only glycine correlated positively with high cereulide production. Glycine is used worldwide as food additive (E 640), flavor modifier, humectant, acidity regulator, and is permitted in the European Union countries, with no regulatory quantitative limitation, in most types of foods. B. subtilis group members are endospore-forming bacteria ubiquitous in the environment, similar to B. cereus in this respect. Bacillus species other than B. cereus have only sporadically been identified as causative agents of food-borne illnesses. We found (Paper IV) that food-borne isolates of B. subtilis and B. mojavensis produced amylosin. It is possible that amylosin was the agent responsible for the food-borne illness, since no other toxic substance was found in the strains. This is the first report on amylosin production by strains isolated from food. We found that the temperature requirement for amylosin production was higher for the B. subtilis strain F 2564/96, a mesophilic producer, than for B. mojavensis strains eela 2293 and B 31, psychrotolerant producers. We also found that an atmosphere with low oxygen did not prevent the production of amylosin. Ready-to-eat foods packaged in micro-aerophilic atmosphere and/or stored at temperatures above 10 °C, may thus pose a risk when toxigenic strains of B. subtilis or B. mojavensis are present.

Environmental factors affecting the occurrence of periglacial landforms in Finnish Lapland: a numerical approach

Determination of the environmental factors controlling earth surface processes and landform patterns is one of the central themes in physical geography. However, the identification of the main drivers of the geomorphological phenomena is often challenging. Novel spatial analysis and modelling methods could provide new insights into the process-environment relationships. The objective of this research was to map and quantitatively analyse the occurrence of cryogenic phenomena in subarctic Finland. More precisely, utilising a grid-based approach the distribution and abundance of periglacial landforms were modelled to identify important landscape scale environmental factors. The study was performed using a comprehensive empirical data set of periglacial landforms from an area of 600 km2 at a 25-ha resolution. The utilised statistical methods were generalized linear modelling (GLM) and hierarchical partitioning (HP). GLMs were used to produce distribution and abundance models and HP to reveal independently the most likely causal variables. The GLM models were assessed utilising statistical evaluation measures, prediction maps, field observations and the results of HP analyses. A total of 40 different landform types and subtypes were identified. Topographical, soil property and vegetation variables were the primary correlates for the occurrence and cover of active periglacial landforms on the landscape scale. In the model evaluation, most of the GLMs were shown to be robust although the explanation power, prediction ability as well as the selected explanatory variables varied between the models. The great potential of the combination of a spatial grid system, terrain data and novel statistical techniques to map the occurrence of periglacial landforms was demonstrated in this study. GLM proved to be a useful modelling framework for testing the shapes of the response functions and significances of the environmental variables and the HP method helped to make better deductions of the important factors of earth surface processes. Hence, the numerical approach presented in this study can be a useful addition to the current range of techniques available to researchers to map and monitor different geographical phenomena.

Vertical distribution of aerosols over the east coast of India inferred from airborne LIDAR measurements

The information on altitude distribution of aerosols in the atmosphere is essential in assessing the impact of aerosol warming on thermal structure and stability of the atmosphere.In addition, aerosol altitude distribution is needed to address complex problems such as the radiative interaction of aerosols in the presence of clouds. With this objective,an extensive, multi-institutional and multi-platform field experiment (ICARB-Integrated Campaign for Aerosols, gases and Radiation Budget) was carried out under the Geosphere Biosphere Programme of the Indian Space Research Organization (ISRO-GBP) over continental India and adjoining oceans during March to May 2006. Here, we present airborne LIDAR measurements carried out over the east Coast of the India during the ICARB field campaign. An increase in aerosol extinction (scattering + absorption) was observed from the surface upwards with a maximum around 2 to 4 km. Aerosol extinction at higher atmospheric layers (>2 km) was two to three times larger compared to that of the surface. A large fraction (75-85%) of aerosol column optical depth was contributed by aerosols located above 1 km. The aerosol layer heights (defined in this paper as the height at which the gradient in extinction coefficient changes sign) showed a gradual decrease with an increase in the offshore distance. A large fraction (60-75%) of aerosol was found located above clouds indicating enhanced aerosol absorption above clouds. Our study implies that a detailed statistical evaluation of the temporal frequency and spatial extent of elevated aerosol layers is necessary to assess their significance to the climate. This is feasible using data from space-borne lidars such as CALIPSO,which fly in formation with other satellites like MODIS AQUA and MISR, as part of the A-Train constellation.

Automatic Road Extraction using High Resolution Satellite Image Based on Texture Progressive Analysis and Normalized Cut Method

In this paper the approach for automatic road extraction for an urban region using structural, spectral and geometric characteristics of roads has been presented. Roads have been extracted based on two levels: Pre-processing and road extraction methods. Initially, the image is pre-processed to improve the tolerance by reducing the clutter (that mostly represents the buildings, parking lots, vegetation regions and other open spaces). The road segments are then extracted using Texture Progressive Analysis (TPA) and Normalized cut algorithm. The TPA technique uses binary segmentation based on three levels of texture statistical evaluation to extract road segments where as, Normalizedcut method for road extraction is a graph based method that generates optimal partition of road segments. The performance evaluation (quality measures) for road extraction using TPA and normalized cut method is compared. Thus the experimental result show that normalized cut method is efficient in extracting road segments in urban region from high resolution satellite image.

Language identification using parallel sub-word recognition

Parallel sub-word recognition (PSWR) is a new model that has been proposed for language identification (LID) which does not need elaborate phonetic labeling of the speech data in a foreign language. The new approach performs a front-end tokenization in terms of sub-word units which are designed by automatic segmentation, segment clustering and segment HMM modeling. We develop PSWR based LID in a framework similar to the parallel phone recognition (PPR) approach in the literature. This includes a front-end tokenizer and a back-end language model, for each language to be identified. Considering various combinations of the statistical evaluation scores, it is found that PSWR can perform as well as PPR, even with broad acoustic sub-word tokenization, thus making it an efficient alternative to the PPR system.

同源四倍体水稻三系亲本的遗传差异、细胞遗传学比较研究及低直链淀粉含量突变体Wx基因序列分析

同源四倍体水稻（2N=4X=48,AAAA）是由二倍体水稻（2N=2X=24,AA）通过秋水仙素诱导染色体加倍后得到的新品系，具有优良的抗病性以及较高的蛋白质含量。因此，在四倍体水平上挖掘水稻的增产潜力成为水稻育种的新手段。同源四倍体水稻具有很强的遗传可塑性和很弱的遗传保守性，利用其作为水稻远缘杂交的桥梁，从野生物种中不断地引进有益的基因，这将有助于杂交水稻的多代利用和固定水稻的杂种优势。但是迄今为止，还没有关于同源四倍体水稻遗传多样性，遗传背景的报道。目前世界关于同源四倍体水稻的研究主要集中在中国，主要研究方向为培育、筛选结实正常的亲本材料，配置和筛选结实率正常或接近正常的组合。经过几十年研究，虽然在材料构建，细胞学研究等方面取得了较大进展，但同样由于结实率低的瓶颈问题未解决，而使多倍体水稻育种未能取得实质性进展。而近年来一些关于同源四倍体水稻低结实率机理的细胞学研究也由于缺乏统计学数据而缺乏说明性。本文用SSR标记，对选取的36个结实率正常同源四倍体水稻三系亲本和14个来源二倍体亲本，分析他们的遗传差异和群体遗传结构。本文还利用我们培育的高、低结实率的同源四倍体水稻恢复系、优良保持系和杂种F1及二倍体对照为材料，进行系统深入的细胞遗传学研究，进一步探讨同源四倍体水稻有性传递后代的发育过程，探索分裂期染色体行为特征与遗传性状稳定性的关系，为进一步选育多倍体水稻品种并将其应用于生产提供理论依据。同源四倍体水稻突变株D4063-1直链淀粉含量比来源二倍体明恢63下降一半,即其直链淀粉含量为5.23%，为研究其直链淀粉含量下降的原因，本文还根据普通水稻Wx基因设计引物，扩增测序获得了D4063-1Wx基因的全序列，与已报道Wx基因进行比对分析，并根据D4063-1和籼稻、粳稻的序列差异并根据D4063-1在该片段上的特征序列位点设计了用于识别D4063-1的寡核苷酸片段,为快速、准确的鉴别低直链淀粉的D4063-1创造了条件。 SSR标记具有基因组分布广泛、数量丰富、多态性高、容易检测、共显性、结果稳定可靠、实验重现性好、操作简单、经济、易于高通量分析等许多优点，被认为是用于遗传多样性、品种鉴定、物种的系统发育、亲缘关系及起源等研究的非常有效的分子标记。本研究选取了中国科学院成都生物所培育的同源四倍体和二倍体水稻亲本，并用36个微卫星标记进行了遗传差异和种群遗传结构分析。在50个品系中，我们观察到较高水平的多态性，每基因等位基因数（Ae）分布于2至6之间（平均值3.028），多态性信息含量（PIC）分布于0.04至0.76之间（平均值0.366）；期望杂合度（He）分布于0.04至0.76之间（平均值0.370），Shannon指数（I）分布于0.098至1.613之间（平均值0.649）。同源四倍体品系的等位基因数，期望杂合性和Shannon指数都比二倍体品系高。在供试50个品系中，较多材料均发现Rare基因，根据SSR多态性指数我们构建了同源四倍体和二倍体水稻的核心指纹库。F-统计值表明遗传差异主要存在于同源四倍体品系中（Fst=0.066）。聚类分析结果表明50个品系可以分为4个组。I组包括所有的同源四倍体和二倍体籼稻保持系，以及一个同源四倍体籼稻雄性不育系及其来源二倍体。II组仅包括IR来源的品系。III组比II组和IV组更复杂，包括同源四倍体和二倍体籼稻恢复系品系。IV组包括同源四倍体和二倍体粳稻品系。此外,由于等位基因及配子的遗传差异,同源四倍体与二倍体品系中存在单位点和双位点的遗传差异。分析结果表明,二倍体和四倍体水稻基因库的不同,其中遗传变异可以区分四倍体与二倍体水稻。同源四倍体水稻具有长期而独立的遗传性，我们能够选育并得到与二倍体亲本相比有特殊优良农艺性状的品系。 本研究以高结实率的同源四倍体水稻恢复系DTP-4、D明恢63及优良保持系D46B为材料进行农艺性状及细胞遗传学比较研究。DTP-4、D明恢63及保持系D46B的的染色体组成均为2N=4X=48，花粉母细胞具有较为理想的减数分裂行为，配对染色体的比率在99%以上，这与理论染色体组构成相符。DTP-4和D明恢63PMC减数分裂各个时期单价体和三价体的比例都非常低，而在MI， PMC观察到较多的二价体和四价体且四价体多以环状形式出现，其最大频率的染色体构型分别为12II 6IV和10II 7IV。恢复系DTP-4和D明恢63在MI四价体频率分别为2.00/PMC和2.26/PMC，而保持系D46B在MI四价体频率为6.00/PMC，极显著地高于恢复系品系，表明保持系D46B具有更好的染色体配对性质；AI保持系D46B的染色体滞后频率为10.62%，远低于恢复系材料DTP－4和D明恢63的19.44％和23.14％，接近二倍体对照明恢63的7.30%水平；TI保持系D46B具有比恢复系更低频率的微核数。而在TII，D46B的正常四分小孢子比率不但高于恢复系品系甚至高于二倍体对照。对高低结实率的同源四倍体水稻恢复系和杂种F1代的花粉育性，结实率和细胞遗传学行为进行了比较研究。DTP-4, D明恢63, D46A´DTP-4和D46A´D明恢63的花粉育性和结实率比D什香和D46A´D什香显著提高。减数分裂分析的结果表明，DTP-4，D明恢63，D什香，D46A´DTP-4，D46A´D明恢63和D46A´D什香其减数分裂染色体构型分别为：0.05I +19.96 II (9.89棒状+10.07环状) +0.01III + 2.20 IV, 0.11I +19.17 II (8.90 棒状+10.37 环状) +0.09III + 2.26 IV + 0.01 VI, 1.33I +9.46 II (4.50 棒状+4.96 环状) +0.44III + 6.02 IV + 0.09VI + 0.09 VIII, 0.02I +14.36 II (6.44 棒状+7.91 环状) +0.01III + 4.80IV + 0.01VIII, 0.06 I +17.67 II (11.01 棒状+6.67 环状) +0.06 III + 3.10 IV + 0.01 VI and 1.11 I +11.31 II (5.80 棒状+5.51 环状) +0.41 III + 5.63 IV+0.03VI+0.03VIII。在同源四倍体水稻恢复系和杂种F1代材料中，最常见的染色体构型为16II +4IV和12II +6IV。在减数分裂过程中，结实率较高的材料染色体异常现象较少而结实率较低的材料染色体异常现象较严重。在杂种F1代中，二价体的比例要低于其相应的恢复系亲本，同样的，单价体，三价体和多价体的比例相比其恢复系亲本也偏低。然而，在减数分裂MI，杂种F1代中四价体的比例要显著高于其恢复系亲本。在中期I，每细胞单价体的比例和花粉育性呈现出极高的负相关(-0.996)，当单价体数目升高时，花粉育性下降。其次是每细胞三价体的比例(-0.987)，之后则是每细胞多价体的比例与花粉育性的负相关(-0.948)。但是统计分析表明，二价体和四价体的比例对花粉育性和结实率没有显著影响。这一结果表明出了花粉育性和细胞减数分裂行为的相关性，同源四倍体的减数分裂行为为筛选高结实率的同源四倍体种系提供了理论依据。 突变体是遗传学研究的基本材料。利用突变体克隆水稻基因,并进而研究基因的生物学功能是水稻功能基因组学的重要研究内容。本课题组在多年的四倍体水稻育种研究中已获得多个低直链淀粉含量突变体，其中一些突变体在直链淀粉含量下降的同时，胚乳外观也发生了显著改变，呈半透明或不透明。同源四倍体水稻突变株D4063-1直链淀粉含量比来源二倍体明恢63下降一半,即其直链淀粉含量为5.23%。为研究其直链淀粉含量下降的原因，我们根据普通水稻Wx基因设计引物，扩增测序获得了D4063-1Wx基因的全序列，与已报道Wx基因进行比对分析；同源四倍体水稻D4063-1Wx基因最显著变化为在外显子序列中发生了碱基缺失，导致移码突变，在第9外显子终止密码子提前出现。D4063-1Wx基因碱基位点的变化还导致了其序列上的酶切位点的变化,对常用限制性内切酶位点分析分析结果表明同源四倍体水稻相对于籼稻和粳稻多了2个sph1酶切位点，相对于粳稻减少了6个Acc1，增加了4个Xba1，1个Xho1，1个Pst1和1个Sal1酶切位点。聚类分析表明D4063-1Wx基因序列与籼稻亲源关系较近，由此推测D4063-1Wx基因来源于籼稻的Wxa基因型。另外，根据D4063-1Wx基因的碱基差异，我们推测D4063-1Wx基因外显子碱基变化导致的RNA加工障碍是其直链淀粉降低的主要原因，并可能与其米饭较软等品质相关。本文还根据D4063-1和籼稻、粳稻的序列差异并根据D4063-1在该片段上的特征序列位点设计了用于识别D4063-1的寡核苷酸片段,并作为PCR反应的引物命名为AUT4063-1,将该引物与我们设计的扩增普通籼稻、粳稻的Wx基因引物F5配合使用建立了识别D4063-1的显性和共显性两种检测方式的分子标记,为快速、准确的鉴别低直链淀粉的D4063-1创造了条件。 研究同源四倍体水稻基因组的遗传差异，探索同源四倍体水稻的遗传规律，研究分裂期染色体行为特征与遗传性状稳定性的关系,旨在揭示四倍体水稻中同源染色体配对能力的遗传差异，为进一步选育多倍体水稻品种并将其应用于生产提供理论依据。 Autotetraploid rice (2N=4X=48, AAAA) is a new germplasm developed from diploid rice (2N=2X=24, AA) through chromosomes doubling with colchicines and is an excellent resource for desirable resistance genes to the pathogens and high protein content. Therefore, heterosis utilization on polyploidy is becoming a new strategy in rice breeding. At present, the main research on autotetraploid rice centralizes in China. Breeding effort has been made to improve autotetraploid rice genetically, however, the progresses are limited due to higher degree of divergence between hybrid sterility and polygenic nature. But to date, almost nothing is reported about the genetic diversity, original and genetic background of autotetraploid rice. Despite several reports on cytological analysis of the mechanisms of low seed set in autotetraploid rice still the results are inconclusive due to lack the statistical evaluation. Therefore, the study on the mechanisms of low seed set in autotetraploid is a priority for rice breeding. Microsatellites or simple sequence repeats (SSRs) are the widely used marker for estimating genetic diversity in many species, including wild, weedy, and cultivated rice. In our research, genetic diversity and population genetic structure of autotetraploid and diploid populations collected from Chengdu Institute of Biology, Chinese Academy of Sciences were studied based on 36 microsatellite loci. For the total of 50 varieties, a moderate to high level of genetic diversity was observed at population levels with the number of alleles per locus (Ae) ranging from 2 to 6 (mean 3.028) and PIC ranging from 0.04 to 0.76 (mean 0.366). The expected heterozygosity (He) varied from 0.04 to 0.76 with the mean of 0.370 and Shannon’s index (I) ranging from 0.098 to 1.613 (mean 0.649). The autotetraploid populations showed a slightly higher level of effective alleles, the expected heterozygosity and Shannon’s index than that of diploid populations. Rare alleles were observed at most of the SSR loci in one or more of the 50 accessions and core fingerprint database of the autotetraploid and diploid rice was constructed. The F-statistics showed that genetic variability mainly existed among autotetraploid populations rather than among diploid populations (Fst=0.066). Cluster analysis of the 50 accessions showed four major groups. Group I contained all of the autotetraploid and diploid indica maintainer lines and a autotetraploid and its original diploid indica male sterile lines. Groups II contained only original of IR accessions. Group III was more diverse than either group II or IV and comprised of both autotetraploid and diploid indica restoring lines. Group IV included japonica cluster of the autotetraploid and diploid rices. Furthermore, genetic differences at the single-locus and two-locus levels, as well as components due to allelic and gametic differentiation, were revealed between autotetraploid and diploid varieties. This analysis indicated that the gene pools of diploid and autotetraploid rice are somewhat dissimilar, which made a variation that distinguishes autotetraploid from diploid rices. Using this variation, we can breed new autotetraploid varieties with some new important agricultural characters but the diploid rice has not. Cytogenetic characteristics in restorer lines DTP-4, DMinghui63 and maintainer line D46B of autotetraploid rices were studied. DTP-4, DMinghui63 and D46B showed the advantage of high seed set and biological yield. The meiotic chromosome behavior was slightly irregular in DTP-4, DMinghui63 and D46B. We observed less univalent, trivalent and multivalent at MI, but more bivalent and quadrivalent were observed. The most frequent chromosome configurations were 12II 6IVand 10II 7IV in restorer and maintainer lines, respectively. The quadrivalent frequency of DTP-4 and Dminghui63 at metaphase(MI) was respectively 2.00/PMC and 2.26/PMC. However that frequency of D46B was 6.00/PMC, which was greatly significantly higher than DTP-4 and Dminghui63. That indicates the maintainer D46B has better chromosome pairing capability in metaphase (MI). The frequency of lagging chromosomes of the maintainer D46B at anaphaseI (AI) was 10.62%, which was significantly lower than that of DTP-4(19.44%) and Dminghui63(23.14%) and nearly reaching the level of diploid CK(7.30%). In telophaseI (TI) maintainer D46B showed lower frequency of microkernel at TI and lower frequency of abnormal spores at telophaseII(TII). We also studied pollen fertility, seed set and cytogenetic characteristics of restorer lines and F1 hybrids of autotetraploid rice. DTP-4, DMinghui63, D46A´DTP-4 and D46A´DMinghui63 showed significantly higher pollen fertility and seed set than DShixiang and D46A´DShixiang. Pairing configurations in PMC of DTP-4, DMinghui63, DShixiang, D46A´DTP-4, D46A´DMinghui63 and D46A´DShixiang were 0.05 I+19.96 II (9.89 rod+10.07 ring)+0.01 III+2.20 IV, 0.11 I+19.17 II (8.90 rod+10.37 ring)+0.09 III+2.26 IV+0.01 VI, 1.33 I+9.46 II (4.50 rod+4.96 ring)+0.44 III+6.02 IV+0.09 VI+0.09 VIII, 0.02 I+14.36 II (6.44 rod+7.91 ring)+0.01 III+4.80 IV+0.01V III, 0.06 I+17.67 II (11.01 rod+6.67 ring)+0.06 III+3.10 IV+0.01 VI and 1.11 I+11.31 II (5.80 rod+5.51 ring)+0.41 III+5.63 IV+0.03 VI+0.03 VIII, respectively. Configuration 16 II+4 IV and 12 II+6 IV occurred in the highest frequency among the autotetraploid restorers and hybrids. Meiotic chromosome behaviors were less abnormal in the tetraploids with high seed set than those with low seed set. The hybrids had fewer frequencies of bivalents, univalents, trivalents and multivalents than the restorers, but higher frequency of quatrivalents than the restorers at MI. The frequency of univalents at M1 had the most impact on pollen fertility and seed set, i.e., pollen fertility decreased with the increase of univalents. The secondary impact factors were trivalents and multivalents, and bivalents and quatrivalents had no effect on pollen fertility and seed set. The correlative relationship between pollen fertility and cytogenetic behaviors could be utilized to improve seed set in autotetraploidy breeding. The amylose content of autotetraploid indica mutant Rice D4063-1 dropped by half than diploid Minghui 63, that is, its amylose content of 5.23%.The whole sequence of Waxy gene of D4063-1 is amplified and sequenced. And the discrepancy of bases is found comparing to the reported Waxy gene. The Waxy gene of autotetraploid Rice D4063-1 had a base deletion in exon sequence, which resulted frameshift mutation in exon 9 and termination codon occur early. The mutation of Wx also led to the change of some common restriction endonuclease sites. Results showed compared to indica and japonica, D4063-1 had two adding sph1 sites. Compared to japonica, D4063-1 had six decreasing Acc1, a adding Xho1, Pst1 and Sal1 restriction sites. Phylogeny analysis shows that the DNA sequence of Waxy gene of D4063-1 is closer to Indica, and we suppose that the Waxy gene of D4063-1 is origin from genotype Wxa. In addition, according to the base differences of Wx in D4063-1, we deduce that RNA processing obstacle led by base change of intron is the main cause to low the amylose content, and related to phenotype of its soft rice. Based on analysis of fragments of D4063-1, indica and japonica and according to the special point of the three species, primers as markers-AUT4063-I were designed for distinguishing the D4063-1 from other rice. Combining with primer pair F5, dominant and codominant ways were established for discriminating them., rapid and correct identification of D4063-1 from other rice could be done. The genetic analysis is important to ensure the original of autotetraploid rice, for maintaining the “distinctiveness” of autotetraploid varieties, and to differentiate between the various genetic background of autotetraploid rice. The autotetraploid breeding will benefit from detailed analysis of genetic diversity in the germplasm collections. Further investigation on mechanisms of meiotic stability should benefit polyploid breeding. These findings demonstrated opportunity to improve meiotic abnormalities as well as grain fertilities in autotetraploid rice.

AN INVESTIGATION OF THE EFFECTS OF SOME PROCESS VARIABLES ON THE MICROENCAPSULATION OF PROPRANOLOL HYDROCHLORIDE BY THE SOLVENT EVAPORATION METHOD

The effects of four process factors: pH, emulsifier (gelatin) concentration, mixing and batch, on the % w/w entrapment of propranolol hydrochloride in ethylcellulose microcapsules prepared by the solvent evaporation process were examined using a factorial design. In this design the minimum % w/w entrapments of propranolol hydrochloride were observed whenever the external aqueous phase contained 1.5% w/v gelatin at pH 6.0 (0.71-0.91% w/w) whereas maximum entrapments occurred whenever the external aqueous phase was composed of 0.5% w/v gelatin at pH 9.0,(8.9-9.1% w/w). The theoretical maximum loading was 50% w/w. Statistical evaluation of the results by analysis of variance showed that emulsifer (gelatin) concentration and pH, but not mixing and batch significantly affected entrapment. An interaction between pH and gelatin concentration was observed in the factorial design which was accredited to the greater effect of gelatin concentration on % w/w entrapment at pH 9.0 than at pH 6.0. Maximum theoretical entrapment was achieved by increasing the pH of the external phase to 12.0. Marked increases in drug entrapment were observed whenever the pH of the external phase exceeded the pK(2) of propranolol hydrochloride. It was concluded that pH, and hence ionisation, was the greatest determinant of entrapment of propranolol hydrochloride into microcapsules prepared by the solvent evaporation process.

Characterization and modelling of software defined radio front-ends

O presente trabalho tem por objectivo estudar a caracterização e modelação de arquitecturas de rádio frequência para aplicações em rádios definidos por software e rádios cognitivos. O constante aparecimento no mercado de novos padrões e tecnologias para comunicações sem fios têm levantado algumas limitações à implementação de transceptores rádio de banda larga. Para além disso, o uso de sistemas reconfiguráveis e adaptáveis baseados no conceito de rádio definido por software e rádio cognitivo assegurará a evolução para a próxima geração de comunicações sem fios. A ideia base desta tese passa por resolver alguns problemas em aberto e propor avanços relevantes, tirando para isso partido das capacidades providenciadas pelos processadores digitais de sinal de forma a melhorar o desempenho global dos sistemas propostos. Inicialmente, serão abordadas várias estratégias para a implementação e projecto de transceptores rádio, concentrando-se sempre na aplicabilidade específica a sistemas de rádio definido por software e rádio cognitivo. Serão também discutidas soluções actuais de instrumentação capaz de caracterizar um dispositivo que opere simultaneamente nos domínios analógico e digital, bem como, os próximos passos nesta área de caracterização e modelação. Além disso, iremos apresentar novos formatos de modelos comportamentais construídos especificamente para a descrição e caracterização não-linear de receptores de amostragem passa-banda, bem como, para sistemas nãolineares que utilizem sinais multi-portadora. Será apresentada uma nova arquitectura suportada na avaliação estatística dos sinais rádio que permite aumentar a gama dinâmica do receptor em situações de multi-portadora. Da mesma forma, será apresentada uma técnica de maximização da largura de banda de recepção baseada na utilização do receptor de amostragem passa-banda no formato complexo. Finalmente, importa referir que todas as arquitecturas propostas serão acompanhadas por uma introdução teórica e simulações, sempre que possível, sendo após isto validadas experimentalmente por protótipos laboratoriais.

Hydrodynamic and sediment fluxes through the inlets of the Ria Formosa

Tese de dout., Ciências do Mar, da Terra e do Ambiente (Ciências do Mar-Oceanografia Física), Faculdade de Ciências e Tecnologia, Univ. do Algarve, 2011

An analysis of bimanual actions in natural feeding of semi-wild chimpanzees

Objective The objective of the current study was to investigate the lateral dominance for a bimanually coordinated natural feeding behavior in semi-wild chimpanzees. Materials and Methods We investigated strychnos spp. fruit consumption behaviors in semi-wild chimpanzees as an ecologically comparable feeding behavior to those found in cerebral lateralization studies of non-primate species. Video recordings of thirty-three chimpanzees were assessed while they consumed hard-shelled strychnos fruits. We explored statistical and descriptive measures of hand dominance to highlight lateralized patterns. Results Statistical evaluation of feeding bouts revealed a group-level right-handed bias for bimanual coordinated feeding actions, however few individuals were statistically lateralized. Descriptive analyses revealed that the majority of individuals were lateralized and possessed a right-handed bias for strychnos feeding behavior. Discussion The results provide empirical evidence in supports of an early evolutionary delineation of function for the right and left hemispheres. The present findings suggest that great apes express an intermediate stage along the phylogenetic trajectory of human manual lateralization.

A Study of role conflict, role ambiguity, locus of control, job satisfaction and participation in decision making among front-line vocational service workers for mentally retarded adults

This study was an investigation of individual and organizational factors, as perceived by front-line vocational service workers from Adult Rehabilitation Centres (ARC Industries) for mentally retarded adults. The specific variables which were measured included role conflict/role ambiguity (role factors), internal/external locus of control (individual differences), job satisfaction with work and supervision (job attitudes) and participation in deci~ion making (organizational factor). The exploration of these constructs was conducted by means of self-report questionnaires which were completed by sixty-nine out of a total of ninety front-line employees. The surveys were distributed in booklet form to nine distinct rehabilitation facilities from St. Catharines, West Lincoln, Greater Niagara, Port Colborne, WeIland, Fort Erie, Hamilton, Guelph and Brantford. The survey data was evaluated by the statisti.cal Package for the Social Sciences (SPSS) which used the Pearson Product Moment Correlation procedure and a compar~son of means test. A comparison of correlation coefficients test was also conducted. This statistical procedure was calculated mathematically. The results obtained from the statistical evaluation confirmed the prediction that self-reported measures of participation in decision making and satisfaction (work and supervision) would be negatively correlated with role conflict and role ambiguity. As well, the speculation that perceived satisfaction (work and supervision) would be positively correlated with participation in decision making was empirically supported. Internal and external locus of control did not contribute to a significant difference in r~sponses to role perceptions (conflict and ambiguity) , satisfaction (work and supervision) or the correlational relationship between participation in decision making and satisfaction (work and supervision). Overall, the findings from this study substantiated the importance of examining employee perceptions in the workplace and the interrelationships among individual and organizational variables. This research was considered a contribution to the general area of occupational stress and to the study of individuals in work organizations.