An Evaluation of Vaneless Diffuser Modelling Methods as a Means of Improving the Off-Design Performance Prediction of Centrifugal Compressors

An evaluation of existing 1-D vaneless diffuser design tools in the context of improving the off-design performance prediction of automotive turbocharger centrifugal compressors is described. A combination of extensive gas stand test data and single passage CFD simulations have been employed in order to permit evaluation of the different methods, allowing conclusions about the relative benefits and deficiencies of each of the different approaches to be determined. The vaneless diffuser itself has been isolated from the incumbent limitations in the accuracy of 1-D impeller modelling tools through development of a method to fully specify impeller exit conditions (in terms of mean quantities) using only standard test stand data with additional interstage static pressure measurements at the entrance to the diffuser. This method allowed a direct comparison between the test data and 1-D methods through sharing common inputs, thus achieving the aim of diffuser isolation.

Crucial to the accuracy of determining the performance of each of the vaneless diffuser configurations was the ability to quantify the presence and extent of the spanwise aerodynamic blockage present at the diffuser inlet section. A method to evaluate this critical parameter using CFD data is described herein, along with a correlation for blockage related to a new diffuser inlet flow parameter ⚡, equal to the quotient of the local flow coefficient and impeller tip speed Mach number. The resulting correlation permitted the variation of blockage with operating condition to be captured.

Ajustes Posturais dos músculos da tibiotársica em indivíduos com Doença de Parkinson durante o sit-to-stand

Introdução: Os ajustes posturais antecipatórios (APAs) são essenciais para o movimento típico, estando alterados nas doenças neuro degenerativas como a doença de Parkinson (DP) Objectivo(s): Estudar os early postural adjustments e os APAs em indivíduos com DP durante o sentar para levantar (STS), com e sem dupla tarefa. Métodos: Foi recolhida a atividade eletromiográfica (EMG) dos músculos tibial anterior, solear e gastrocnémio medial, em indivíduos com e sem DP (9 em cada grupo), durante o STS. Este foi determinado pelo deslocamento antero posterior do centro de pressão através da plataforma de forças, sendo a tarefa cognitiva dada pelo stroop colour word interference test. Os ajustes posturais foram avaliados pelo tempo de ativação e pela atividade EMG relativa, bem como pela análise da co ativação agonista/antagonista. Resultados: Não foram encontradas diferenças estatisticamente significativas entre o grupo de controlo e o grupo com DP em nenhuma das variáveis analisadas Há uma tendência para o grupo com DP apresentar APAs mais cedo na tarefa simples, mantendo atividade muscular durante mais tempo e com maior atividade EMG relativa que o grupo controlo. Na dupla tarefa mantém-se essa tendência, exceto o tempo de ativação ser mais próximo do levante. Conclusão: Os défices posturais decorrentes da doença de Parkinson parecem não ser evidenciados na primeira fase do sit-to-stand.

Reorganização de componentes do controlo postural na sequência sit-to-stand em indivíduos com acidente vascular encefálico.

Introdução: O controlo postural (CP) constitui um dos requisitos indispensáveis para a execução de muitas tarefas funcionais, tendo sido demonstrado que após um acidente vascular encefálico (AVE) este esteja severamente alterado. Os mecanismos de neuroplasticidade evidenciam capacidade de mudança no CP através de uma intervenção em Fisioterapia. Objetivo: Avaliar a influência da modificação de componentes do membro inferior/tronco inferior (TI) na modificação de componentes da cintura escapular/tronco superior (TS), e a sua influência em variáveis representativas do CP no Sit-to-Stand (STS). Metodologia: O estudo apresenta três casos após AVE, que realizaram intervenção em fisioterapia baseada no conceito de Bobath, durante 11 semanas. Antes e após a intervenção, foi avaliado o alinhamento do tronco e o postural setting da escápula; variáveis associadas ao deslocamento e velocidade do Centro de Pressão (CoP); força, área de contacto e pressão média, durante a sequência do STS, recorrendo ao software SAPo e à plataforma de pressões EMED . Avaliou-se ainda os itens da Classificação Internacional de Funcionalidade (CIF). Resultados: Após a intervenção, os indivíduos em estudo apresentaram um melhor alinhamento do tronco, associado a um melhor postural setting da escápula, no conjunto postural sentado; bem como uma diminuição do deslocamento e velocidade máxima do CoP, no período estável (posição de sentado) e um aumento global da velocidade do CoP, no seat-off, o que parece refletir uma melhoria do CP. Quanto à CIF também se verificou uma diminuição da restrição na participação e limitação na atividade. Conclusão: A modificação de componentes neuro-motores através de uma intervenção baseada no conceito de Bobath teve efeitos positivos do ponto de vista do CP, relacionado com uma melhor relação entre membro inferior/TI e cintura escapular/TS, evidenciando uma melhor relação entre TS/TI nos três indivíduos após AVE.

Cluster's last stand?

On 4 June last year the first attempt to make three-dimensional measurements in space was lost when the Ariane 5 rocket veered off course and self-destructed, 39 s into its maiden flight. On board were four identical spacecraft which made up Cluster,a mission that the European Space Agency called a “cornerstone” of its Horizon 2000 scientific programme. A full description of the Cluster satellites is given in a special issue of Space Science Reviews (Escoubet et al. 1997). Their loss dealt a devastating blow to the Cluster scientists and to those working on other missions and projects planned to interact with Cluster. Many discoveries have been made during the 15 years in which Cluster progressed from an idea to the state-of-the-art satellites that were on top of Ariane 501 on 4 June. However, these discoveries invariably underline rather than undermine the importance of Cluster. Now plans to recover the unique and exciting research that was to be done using Cluster are well advanced.

Would the 'real' girl gamer please stand up? Gender, LAN cafes and the reformulation of the 'girl' gamer.

In this paper we consider the significance of cyber 'LAN' cafeacutes as sites where on and off-line practices meet in way that complicates binary notions of the gendered gamer. Existing research into computer games culture suggests a male dominated environment and points to girls' lower levels of competence and participation in games. Building on recent studies interested in the constitution of gender through engagement with online technologies, we draw on Judith Butler's politics of performative resignification, and conceptualise digital culture as a resource through which 'girl' gamers are mobilised and potentially reformulated, experiencing their gaming identities in contradictory ways, and fragmenting the category 'girl' in the very act of articulating their place in a male dominated gaming culture. It is argued that through the meeting of on and off-line practices, LAN cafeacutes operate as a location that is particularly amenable to reformulative work in relation to gendered gaming identities.

Morphology and surface sedimentation on the upper and middle continental slope off Uruguay

This paper presents for the first time a morphological and surface sediment characterization of the Uruguayan outer continental shelf and slope. The study is based on a high-resolution coverage using hydrographical, geomorphological and sedimentological sampling and several textural and productivity proxies. Along slope terraces and an important canyon system characterizes continental slope morphology, indicating that across- and down-slope sedimentary processes control large-scale sedimentation. Terraces represent the prolongation of the Argentinean Contouritic Depositional System that vanishes in the study area, presumably as a result of the dynamic of the Brazil-Malvinas confluence. Canyons incised in the upper slope are likely related to low-stand sea level conditions. At the outer shelf and shallow upper slope (170-250 m depth), off-shelf sand transport is inferred from the distribution of relict sand and reworked biogenic gravel. In the upper continental slope, the northern region is characterized by an erosive environment controlled by a steep slope and the southward flowing Brazil current. In the south, a depositional environment is enhanced by the presence of a gentler slope and seaward incised canyons and is mainly controlled by hemipelagic processes associated with nutrient-rich Sub-Antarctic Waters (SAW), by its confluence with South Atlantic Central Waters (SACW) and by the Rio de la Plata’s (RdlP) influence. Additionally, within the upper slope, the occurrence of igneous-metamorphic cobbles and pebbles in canyon and mound lag deposits suggests the influence of glacial fluvial discharge and/or iceberg transport processes. In the middle slope, sedimentation is controlled by thermohaline-induced deep-water bottom currents. The decreasing influence of the erosive Antarctic Intermediate Water (AAIW) is evident in a northward diminution in grain size. The variety of transport and sedimentary processes identified reflect the control of the Brazil-Malvinas confluence zone and the Rio de la Plata’s discharge.

Neogene and Paleocene-Maestrichtian calcareous nannofossils in sediments of the upper continental rise off New Jersey

Maestrichtian to Holocene calcareous nannofossils from two closely spaced sites on the upper continental rise some 100 miles (161 km) southeast of Atlantic City, New Jersey, were zoned in order to help date a major canyon-cutting event in the late Miocene and to delineate and correlate other hiatuses with seismic stratigraphy. Mid-middle Eocene through middle Miocene sediments (Zones CP14 to CN6) were not recovered in these holes, but nearly all other zones are accounted for. The Eocene section is described in a companion chapter (Applegate and Wise, 1987, doi:10.2973/dsdp.proc.93.118.1987). Nannofossils are generally sparse and moderately preserved in the clastic sediments of Site 604. Sedimentation rates are extremely high for the upper Pleistocene (201 m/m.y. minimum) above a hiatus calculated to span 0.44 to 1.1 Ma. The associated disconformity is correlated with local seismic reflection Horizon Pr . Sedimentation rates continue to be high (93 m/m.y.) down to a second hiatus in the upper Pliocene dated from about 2.4 to 2.9 (or possibly 3.3) Ma. The disconformity associated with this hiatus is correlated with local seismic reflection Horizon P2 and regional Reflector Blue, which can be interpreted to mark either the onset of Northern Hemisphere continental glaciation or circulation changes associated with the closure of the Central American Seaway. Sedimentation rates in the pre-glacial lower Pliocene are only about a third those in the glacial upper Pliocene. A prominent disconformity in the upper Miocene marks a major lithologic boundary that separates Messinian(?) glauconitic claystones above from lower Tortonian conglomeratic debris flows and turbidites below. The debris flows recovered are assigned to nannofossil Zones CN8a and CN7, but drilling difficulties prevented penetration of the bottom of this sequence some 100 m below the terminal depth of the hole. Correlation of the lower bounding seismic reflector (M2/Merlin?) to a drift sequence drilled on the lower rise at DSDP Site 603, however, predicts that the debris flows began close to the beginning of the late Miocene (upper Zone CN6 time) at about 10.5 Ma. The debris flows represent a major canyon-cutting event that we correlate with the beginning of the particularly severe late Miocene glaciations believed to be associated with the formation of the West Antarctic Ice Sheet. The existence of these spectacular debris flows strongly suggest that the late Miocene glacio-eustatic low stand occurred during Vail Cycle TM3.1 (lower Tortonian) rather than during Vail Cycle TM3.2 (Messinian) as originally published. Beneath a set of coalesced regional disconformities centered upon seismic reflection Horizon Au, coccoliths are abundant and in general are moderately preserved at Site 605 in a 619-m carbonate section extending from the middle Eocene Zone CP13b to the upper Maestrichtian Lithraphidites quadratus Zone. Sedimentation rates are 37 m/m.y. in the Eocene down to a condensed interval near the base (Zone CP9). A disconformity is suspected near the Eocene/Paleocene boundary. Sedimentation rates for the upper Paleocene Zone CP8 are similar to those of the Eocene, but Zones CP7 and CP6 lie within another condensed interval. The highest Paleocene rates are 67 m/m.y. down through Zones CP5 and CP4 to a major disconformity that separates the upper Paleocene from the Danian. This hiatus spans about 2.6 m.y. (upper Zone CP3 to lower Zone CP2) and corresponds to the major sea-level drop at the base of Vail Cycle TE2.1. As the most prominent break in this Paleogene section, it may correspond to seismic reflection Horizon A* of the North American Basin. Sedimentation rates from this point to the Cretaceous/Tertiary boundary drop to 11 m/m.y., still high for a Paleocene DSDP section. No major break in deposition could be detected at the Cretaceous/Tertiary boundary.

The rise and fall of stand-alone social reporting in a multinational subsidiary in Bangladesh:a case study

Purpose -The main aim of this paper is to examine the underlying drivers for the development and subsequent discontinuation of stand-alone corporate social responsibility (CSR) reporting in a multinational subsidiary in Bangladesh. Design/Methodology/Approach - The research approach employed for this purpose is a case study using evidence from a series of in depth interviews conducted during the period 2002-2010. Interview data is supplemented by examining other sources of information including annual reports, stand-alone social reports and relevant newspaper articles during the study period. Findings - It appears that the stand-alone CSR reporting process was initiated to give the subsidiary a formal space in which to legitimise its activities in Bangladesh where both tobacco control regulation and a strong anti-tobacco movement were gaining momentum. At the start of the process in 2002 corporate interviewees were very receptive of this initiative and strongly believed that it would not be a one off exercise. However, in the face of subsequent significant national policy shifts concerning tobacco control, irreconcilable stakeholder demands and increasing criticism of the CSR activities of the organisation at home and abroad the process was brought to an abrupt end in 2009. Research Limitations/Implications - The paper has a number of implications for policy makers concerning the future prospects for stand-alone social/sustainability reporting as a means of enhancing organisational transparency and accountability. In addition the paper discusses a number of theoretical implications for the development of legitimacy theory. Originality/value - Using the lens of legitimacy the paper theorises the circumstances leading to the initiation and subsequent cessation of CSR reporting in the organisation concerned. As far as we know this is the first study which theorises and provides significant fieldwork based empirical evidence regarding the discontinuation of stand-alone social reporting by a multinational company operating in a developing country. Thus, it extends previous desk-based attempts at using legitimacy theory to explain a decrease (or discontinuity) in CSR disclosures by de Villiers and van Staden (2006) and Tilling and Tilt (2010).

Cooperation using a robotic ad hoc network made from Bluetooth, JXTA, OSGi and other commercial off the shelf (COTS) products

Abstract - Mobile devices in the near future will need to collaborate to fulfill their function. Collaboration will be done by communication. We use a real world example of robotic soccer to come up with the necessary structures required for robotic communication. A review of related work is done and it is found no examples come close to providing a RANET. The robotic ad hoc network (RANET) we suggest uses existing structures pulled from the areas of wireless networks, peer to peer and software life-cycle management. Gaps are found in the existing structures so we describe how to extend some structures to satisfy the design. The RANET design supports robot cooperation by exchanging messages, discovering needed skills that other robots on the network may possess and the transfer of these skills. The network is built on top of a Bluetooth wireless network and uses JXTA to communicate and transfer skills. OSGi bundles form the skills that can be transferred. To test the nal design a reference implementation is done. Deficiencies in some third party software is found, specifically JXTA and JamVM and GNU Classpath. Lastly we look at how to fix the deciencies by porting the JXTA C implementation to the target robotic platform and potentially eliminating the TCP/IP layer, using UDP instead of TCP or using an adaptive TCP/IP stack. We also propose a future areas of investigation; how to seed the configuration for the Personal area network (PAN) Bluetooth protocol extension so a Bluetooth TCP/IP link is more quickly formed and using the STP to allow multi-hop messaging and transfer of skills.