Determinação de vitaminas antioxidantes em suplementos e avaliação da rotulagem nutricional

Introdução: Diante das mudanças nos hábitos de consumo alimentar da população brasileira, suplementos vitamínicos e alimentos enriquecidos são veículos comumente empregados para atender as necessidades de ingestão de micronutrientes. A diversidade de suplementos vitamínicos comercializados atualmente leva à necessidade de desenvolvimento de métodos analíticos de fácil execução e alta produtividade. Informações confiáveis sobre os teores de vitaminas poderão ser obtidas somente com métodos analíticos validados. Objetivos: Validar metodologias analíticas e avaliar o teor de vitaminas antioxidantes em suplementos adquiridos no comércio do município de São Paulo - Brasil, o efeito do armazenamento nestes compostos e confrontar os valores analisados com os valores declarados na rotulagem. Métodos: As metodologias analíticas para determinação de vitaminas antioxidantes por cromatografia líquida de alta eficiência com detector de arranjo de diodos (CLAE-DAD) e de vitamina C por titulação potenciométrica foram validadas para as matrizes sólidas, oleosas e líquidas de suplementos vitamínicos. A estabilidade das vitaminas foi avaliada a cada 6 meses durante 12 meses de armazenamento e a avaliação da rotulagem foi realizada de acordo com as legislações vigentes no Brasil. Resultados: Para os métodos cromatográficos, os limites de detecção (LDs) e de quantificação (LQs) variaram entre 0,3 e 4,3 µg/mL, e entre 0,5 e 14,0 µg/mL respectivamente. As recuperações dos padrões adicionados nas matrizes variaram entre 92 por cento e 109 por cento e entre 86 por cento e 108 por cento no material de referência. A repetitividade foi calculada pelo desvio padrão relativo (RSD), apresentando valores entre 0,2 por cento e 9,6 por cento . Para a determinação de vitamina C pelo método potenciométrico, o LD e o LQ foram respectivamente 1 mg e 3 mg; a recuperação no material de referência foi de 99,8 por cento e a precisão variou entre 0,4 e 3,9 por cento . Das 57 amostras avaliadas, 59 por cento e 35 por cento apresentaram teores de vitaminas A e E respectivamente, abaixo dos valores declarados no rótulo; por outro lado, 20 por cento das amostras apresentaram teores de vitamina E acima dos valores declarados. Em relação aos teores de vitamina C, 60 por cento das amostras estavam de acordo com os valores declarados. O estudo da estabilidade demonstrou degradação significativa das vitaminas A, E e C em aproximadamente 90 por cento das amostras com 12 meses de armazenamento. Na avaliação da rotulagem dos suplementos vitamínicos, 47 das amostras apresentaram uma ou mais irregularidades. Conclusão: Os métodos propostos se mostraram adequados para análise de diferentes matrizes de suplementos vitamínicos. Os resultados das análises de vitaminas nestes produtos mostraram a necessidade urgente de monitoramento em conjunto com ações de fiscalização, pois verificou-se que a maioria das amostras não atenderam a legislação, principalmente quanto aos teores declarados na informação nutricional da rotulagem. A sobredosagem de vitaminas pode ser necessária para manter os teores declarados durante o armazenamento, porém, a quantidade adicional de vitamina a ser incluída no suplemento deve estar dentro de limites seguros e depende de cada amostra, pois além da matriz, diversos fatores relacionados aos compostos e à embalagem também podem influenciar na estabilidade das vitaminas.

Obtenção de extratos da Opuntia fícus-indica L. Mill e suas aplicações em formulações cosméticas: avaliação in vivo do sensorial e da eficácia hidratante

Opuntia fícus - indica (L.) Mill is a cactacea presents in the Caatinga ecosystem and shows in its chemical c omposition flavonoids, galacturonic acid and sugars. Different hydroglicolic (EHG001 and EHG002) and hydroethanolic subsequently lyophilized (EHE001 and EHE002) extracts were developed. The EHE002 had his preliminary phytochemical composition investigated by thin layer chromatography (TLC) and we observed the predominance of flavonoids. Different formulations were prepared as emulsions with Sodium Polyacrylate (and) Hydrogenated Polydecene (and) Trideceth - 6 (Rapithix® A60), and Polyacrylamide (and) C13 - 14 I soparaffin (and) Laureth - 7 (Sepigel® 305), and gel with Sodium Polyacrylate (Rapithix® A100). The sensorial evaluation was conducted by check - all - that - apply method. There were no significant differences between the scores assigned to the formulations, howe ver, we noted a preference for those formulated with 1,5% of Rapithix® A100 and 3,0% of Sepigel® 305. These and the formulation with 3% Rapithix® A60 were tested for preliminary and accelerated stability. In accelerated stability study, samples were stored at different temperatures for 90 days. Organoleptic characteristics, the pH values and rheological behavior were assessed. T he emulsions formulated with 3,0% of Sepigel® 305 and 1,5% of Rapithix® A60 w ere stable with pseudoplastic and thixotropic behavior . The moisturizing clinical efficacy of the emulsions containing 3,0% of Sepigel® 305 containing 1 and 3% of EHG001 was performed using the capacitance method (Corneometer®) and transepidermal water lost – TEWL evaluation ( Tewameter®). The results showed t hat the formulation with 3% of EHG001 increased the skin moisturizing against the vehicle and the extractor solvent formulation after five hours. The formulations containing 1 and 3% of EHG001 increased skin barrier effect by reducing transepidermal water loss up to four hours after application.

Formulation and characterization of a 0.1% rapamycin cream for the treatment of Tuberous Sclerosis Complex-related angiofibromas

International audience

Desenvolvimento de um aditivo natural à base de catequina: otimização da extração e estabilização a partir de frutos de Arbutus unedo L.

The common Mediterranean ornamental strawberry-tree (Arbutus unedo L.) produces an edible reddish sweet berry that is found to be bland and tasteless unless it is consumed overripe, otherwise it is discarded or used as basic agricultural sub residue. The bioactive properties of this fruit have been reported and related with phenolic compounds, mainly flavan-3-ols, such as catechin and procyanidins, which has opened the opportunity to exploit their extraction from alternative sources.The common Mediterranean ornamental strawberry-tree (Arbutus unedo L.) produces an edible reddish sweet berry that is found to be bland and tasteless unless it is consumed overripe, otherwise it is discarded or used as basic agricultural sub residue. The bioactive properties of this fruit have been reported and related with phenolic compounds, mainly flavan-3-ols, such as catechin and procyanidins, which has opened the opportunity to exploit their extraction from alternative sources. This study compares and optimizes the maceration, microwave and ultrasound extraction techniques in the recovery of a catechin extract from Arbutus unedo L. fruits and evaluate the stability of flavan-3-ols during storage and application processes. To obtain conditions that maximize the catechin extraction yield, a response surface methodology was used. Maceration and microwave extractions were found to be the most effective methods, capable of yielding 1.38±0.1 and 1.70±0.3 mg of catechin/g dry weight (dw) in the corresponding optimal extraction conditions. The optimal conditions for maceration were 93.2±3.7 min, 79.6±5.2 ºC and 23.1±3.7 % of ethanol, while for the microwave extraction were 42.2±4.1 min, 137.1±8.1 ºC and 12.1±1.1 % of ethanol. The microwave system was a quicker solution, conducting to slightly higher yields of catechin than maceration, but this one needed lower temperatures to reach similar yields. The ultrasound method was the least effective solution in terms of catechin yield extraction (0.71±0.1 mg/g at 42.4±3.6 min, 314.9±21.2 W and 40.3±3.8 %. ethanol). The stability was tested with of the catechin-enriched extract (60% flavan-3-ols and 22% catechin), obtained under the best maceration conditions, was tested. Therefore, catechin-enriched extracts were submitted to physical and chemical stability studies, considering the main affecting variables (time, temperature and pH): i) a stability study of the extracts during storage as powder system; and ii) a stability study of the extracts in simulated food environment (aqueous solution system). The measured responses were the flavan-3-ols and catechin contents, determined by HPLC-DAD, and the antioxidant activity of the extracts evaluated by hydrophilic assays. Mechanistic and phenomenological equations were used to describe the responses, and the optimal conditions for flavan-3-ols (including catechin) stability as powder extract during a month were pH= 5.4 and T= -20ºC; while its stability in aqueous solution remained during the 24 h of application at pH<4 and T<30ºC. This study compares and optimizes the maceration, microwave and ultrasound extraction techniques in the recovery of a catechin extract from Arbutus unedo L. fruits and evaluate the stability of flavan-3-ols during storage and application processes. To obtain conditions that maximize the catechin extraction yield, a response surface methodology was used. Maceration and microwave extractions were found to be the most effective methods, capable of yielding 1.38±0.1 and 1.70±0.3 mg of catechin/g dry weight (dw) in the corresponding optimal extraction conditions. The optimal conditions for maceration were 93.2±3.7 min, 79.6±5.2 ºC and 23.1±3.7 % of ethanol, while for the microwave extraction were 42.2±4.1 min, 137.1±8.1 ºC and 12.1±1.1 % of ethanol. The microwave system was a quicker solution, conducting to slightly higher yields of catechin than maceration, but this one needed lower temperatures to reach similar yields. The ultrasound method was the least effective solution in terms of catechin yield extraction (0.71±0.1 mg/g at 42.4±3.6 min, 314.9±21.2 W and 40.3±3.8 %. ethanol). The stability was tested with of the catechin-enriched extract (60% flavan-3-ols and 22% catechin), obtained under the best maceration conditions, was tested. Therefore, catechin-enriched extracts were submitted to physical and chemical stability studies, considering the main affecting variables (time, temperature and pH): i) a stability study of the extracts during storage as powder system; and ii) a stability study of the extracts in simulated food environment (aqueous solution system). The measured responses were the flavan-3-ols and catechin contents, determined by HPLC-DAD, and the antioxidant activity of the extracts evaluated by hydrophilic assays. Mechanistic and phenomenological equations were used to describe the responses, and the optimal conditions for flavan-3-ols (including catechin) stability as powder extract during a month were pH= 5.4 and T= -20ºC; while its stability in aqueous solution remained during the 24 h of application at pH<4 and T<30ºC.

Contribuição à estabilidade transitória de sistemas elétricos industriais de unidades estacionárias de produção de petróleo

Dissertação (mestrado)—Universidade de Brasília, Faculdade de Tecnologia, Departamento de Engenharia Elétrica, 2015.

Translation Studies on an Annular Field Reversed Configuration Device for Space Propulsion

This research investigated annular field reversed configuration (AFRC)devices for high power electric propulsion by demonstrating the acceleration of these plasmoids using an experimental prototype and measuring the plasmoid's velocity, impulse, and energy efficiency. The AFRC plasmoid translation experiment was design and constructed with the aid of a dynamic circuit model. Two versions of the experiment were built, using underdamped RLC circuits at 10 kHz and 20 kHz. Input energies were varied from 100 J/pulse to 1000 J/pulse for the 10 kHz bank and 100 J/pulse for the 20 kHz bank. The plasmoids were formed in static gas fill of argon, from 1 mTorr to 50 mTorr. The translation of the plasmoid was accomplished by incorporating a small taper into the outer coil, with a half angle of 2°. Magnetic field diagnostics, plasma probes, and single-frame imaging were used to measure the plasmoid's velocity and to diagnose plasmoid behavior. Full details of the device design, construction, and diagnostics are provided in this dissertation. The results from the experiment demonstrated that a repeatable AFRC plasmoid was produced between the coils, yet failed to translate for all tested conditions. The data revealed the plasmoid was limited in lifetime to only a few (4-10) μs, too short for translation at low energy. A global stability study showed that the plasma suffered a radial collapse onto the inner wall early in its lifecycle. The radial collapse was traced to a magnetic pressure imbalance. A correction made to the circuit was successful in restoring an equilibrium pressure balance and prolonging radial stability by an additional 2.5 μs. The equilibrium state was sufficient to confirm that the plasmoid current in an AFRC reaches a steady-state prior to the peak of the coil currents. This implies that the plasmoid will always be driven to the inner wall, unless it translates from the coils prior to peak coil currents. However, ejection of the plasmoid before the peak coil currents results in severe efficiency losses. These results demonstrate the difficulty in designing an AFRC experiment for translation as balancing the different requirements for stability, balance, and efficient translation can have competing consequences.

Stability and in vitro penetration study of rutin incorporated in a cosmetic emulsion through an alternative model biomembrane

Rutin is employed as antioxidant and to prevent the capillary fragility and, when incorporated in cosmetic emulsions, it must target the action site. In vitro cutaneous penetration studies through human skin is the ideal situation, however, there are difficulties to obtain and to maintain this tissue viability. Among the membrane models, shed snake skin presents itself as pure stratum corneum, providing barrier function similar to human and it is obtained without the animal sacrifice. The objectives of this research were the development and stability evaluation of a cosmetic emulsion containing rutin and propylene glycol (penetration enhancer) and the evaluation or rutin in vitro cutaneous penetration and retention from the emulsion, employing an alternative model biomembrane. Emulsion was developed with rutin and propylene glycol, both at 5.0% w/w. Active substance presented on the formulation was quantified by a validated spectrophotometric method at 361.0 nm. Rutin Rutin cutaneous penetration and retention was performed in vertical diffusion cells with shed snake skin of Crotalus durissus, as alternative model biomembrane, and distilled water and ethanol 99.5% (1:1), as receptor fluid. The experiment was conducted for six hours, at 37.0 +/- 0.5 degrees C with constant stirring of 300 rpm. Spectrophotometry at 410.0 nm, previously validated, determined the active substance after cutaneous penetration/ retention. Emulsion did not promote rutin cutaneous penetration through C. durissus skin, retaining 0.931 +/- 0.0391 mu g rutin/mg shed snake skin. The referred formulation was chemically stable for 30 days after stored at 25.0 +/- 2.0 degrees C, 5.0 +/- 0.5 degrees C and 45.0 +/- 0.5 degrees C. In conclusion, it has not been verified the active cutaneous penetration through the model biomembrane, but only its retention on the Crotalus durissus stratum corneum, condition considered stable for 30 days.

A study of the stability of subcycling algorithms in structural dynamics

Algorithms for explicit integration of structural dynamics problems with multiple time steps (subcycling) are investigated. Only one such algorithm, due to Smolinski and Sleith has proved to be stable in a classical sense. A simplified version of this algorithm that retains its stability is presented. However, as with the original version, it can be shown to sacrifice accuracy to achieve stability. Another algorithm in use is shown to be only statistically stable, in that a probability of stability can be assigned if appropriate time step limits are observed. This probability improves rapidly with the number of degrees of freedom in a finite element model. The stability problems are shown to be a property of the central difference method itself, which is modified to give the subcycling algorithm. A related problem is shown to arise when a constraint equation in time is introduced into a time-continuous space-time finite element model. (C) 1998 Elsevier Science S.A.

Color stability of silorane-based composites submitted to accelerated artificial ageing-An in situ study

Objectives: To assess the in situ color stability, surface and the tooth/restoration interface degradation of a silorane-based composite (P90, 3M ESPE) after accelerated artificial ageing (AAA), in comparison with other dimethacrylate monomer-based composites (Z250/Z350, 3M ESPE and Esthet-X, Dentsply). Methods: Class V cavities (25 mm(2) x 2 mmdeep) were prepared in 48 bovine incisors, which were randomly allocated into 4 groups of 12 specimens each, according to the type of restorative material used. After polishing, 10 specimens were submitted to initial color readings (Easyshade, Vita) and 2 to analysis by scanning electronic microscopy (SEM). Afterwards, the teeth were submitted to AAA for 384 h, which corresponds to 1 year of clinical use, after which new color readings and microscopic images were obtained. The values obtained for the color analysis were submitted to statistical analysis (1-way ANOVA, Tukey, p < 0.05). Results: With regard to color stability, it was verified that all the composites showed color alteration above the clinically acceptable levels (Delta E >= 3.3), and that the silorane-based composite showed higher Delta E (18.6), with a statistically significant difference in comparison with the other composites (p < 0.05). The SEM images showed small alterations for the dimethacrylate-based composites after AAA and extensive degradation for the silorane-based composite with a rupture at the interface between the matrix/particle. Conclusion: It may be concluded that the silorane-based composite underwent greater alteration with regard to color stability and greater surface and tooth/restoration interface degradation after AAA. (C) 2011 Elsevier Ltd. All rights reserved.

Dynamical Stability and Predictability of Football Players: The Study of One Match

The game of football demands new computational approaches to measure individual and collective performance. Understanding the phenomena involved in the game may foster the identification of strengths and weaknesses, not only of each player, but also of the whole team. The development of assertive quantitative methodologies constitutes a key element in sports training. In football, the predictability and stability inherent in the motion of a given player may be seen as one of the most important concepts to fully characterise the variability of the whole team. This paper characterises the predictability and stability levels of players during an official football match. A Fractional Calculus (FC) approach to define a player’s trajectory. By applying FC, one can benefit from newly considered modeling perspectives, such as the fractional coefficient, to estimate a player’s predictability and stability. This paper also formulates the concept of attraction domain, related to the tactical region of each player, inspired by stability theory principles. To compare the variability inherent in the player’s process variables (e.g., distance covered) and to assess his predictability and stability, entropy measures are considered. Experimental results suggest that the most predictable player is the goalkeeper while, conversely, the most unpredictable players are the midfielders. We also conclude that, despite his predictability, the goalkeeper is the most unstable player, while lateral defenders are the most stable during the match.

Evolution of methodology for the study of adaptability and stability in cultivated species.

The GxE interaction only became widely discussed from evolutionary studies and evaluations of the causes of behavioral changes of species cultivated in environments. In the last 60 years, several methodologies for the study of adaptability and stability of genotypes in multiple environments trials were developed in order to assist the breeder's choice regarding which genotypes are more stable and which are the most suitable for the crops in the most diverse environments. The methods that use linear regression analysis were the first to be used in a general way by breeders, followed by multivariate analysis methods and mixed models. The need to identify the genetic and environmental causes that are behind the GxE interaction led to the development of new models that include the use of covariates and which can also include both multivariate methods and mixed modeling. However, further studies are needed to identify the causes of GxE interaction as well as for the more accurate measurement of its effects on phenotypic expression of varieties in competition trials carried out in genetic breeding programs.

Do orthopaedic shoes improve local dynamic stability of gait? An observational study in patients with chronic foot and ankle injuries.

BACKGROUND: Complex foot and ankle fractures, such as calcaneum fractures or Lisfranc dislocations, are often associated with a poor outcome, especially in terms of gait capacity. Indeed, degenerative changes often lead to chronic pain and chronic functional limitations. Prescription footwear represents an important therapeutic tool during the rehabilitation process. Local Dynamic Stability (LDS) is the ability of locomotor system to maintain continuous walking by accommodating small perturbations that occur naturally during walking. Because it reflects the degree of control over the gait, LDS has been advocated as a relevant indicator for evaluating different conditions and pathologies. The aim of this study was to analyze changes in LDS induced by orthopaedic shoes in patients with persistent foot and ankle injuries. We hypothesised that footwear adaptation might help patients to improve gait control, which could lead to higher LDS: METHODS: Twenty-five middle-aged inpatients (5 females, 20 males) participated in the study. They were treated for chronic post-traumatic disabilities following ankle and/or foot fractures in a Swiss rehabilitation clinic. During their stay, included inpatients received orthopaedic shoes with custom-made orthoses (insoles). They performed two 30s walking trials with standard shoes and two 30s trials with orthopaedic shoes. A triaxial motion sensor recorded 3D accelerations at the lower back level. LDS was assessed by computing divergence exponents in the acceleration signals (maximal Lyapunov exponents). Pain was evaluated with Visual Analogue Scale (VAS). LDS and pain differences between the trials with standard shoes and the trials with orthopaedic shoes were assessed. RESULTS: Orthopaedic shoes significantly improved LDS in the three axes (medio-lateral: 10% relative change, paired t-test p < 0.001; vertical: 9%, p = 0.03; antero-posterior: 7%, p = 0.04). A significant decrease in pain level (VAS score -29%) was observed. CONCLUSIONS: Footwear adaptation led to pain relief and to improved foot & ankle proprioception. It is likely that that enhancement allows patients to better control foot placement. As a result, higher dynamic stability has been observed. LDS seems therefore a valuable index that could be used in early evaluation of footwear outcome in clinical settings.

Intra-individual stability of neuromotor tasks from 6 to 18 years: a longitudinal study.

This study investigates the intra-individual stability of the speed of several motor tasks and the intensity of associated movements in 256 children (131 girls, 125 boys) from the Zurich generational study using the Zurich neuromotor assessment battery (ZNA) over a 12-year period from the age of 6 to 18 years. The stability was assessed by correlograms of standard deviation scores calculated from age- and gender-adjusted normative values and compared with standing height and full scale intelligence quotient (IQ). While motor tasks of hand, finger and foot (HFT) and contralateral associated movements (CAM) exhibited a moderate stability (summary measure as correlation coefficients between two measurements made 4 years apart: .61 and .60), other tasks (dynamic balance, static balance and pegboard) were only weakly stable (.46, .47 and .49). IQ and height were more stable than neuromotor components (.72 and .86). We conclude that the moderately stable HFT and CAM may reflect "motor traits", while the stability of the pegboard and balance tasks is weaker because these skills are more experience related and state-dependent.

Stability and consistency of coping in adolescence: A longitudinal study

This study analyzed stability and consistency of coping among adolescents. The objectives were twofold: a) to analyze temporal stability and cross-situational consistency of coping responses after a 17- month interval, taking into account gender, age and type of stressor. b) To analyze the relative weight of contextual versus dispositional factors in predicting future coping. A cohort of 341 adolescents (51% girls and 49% boys aged between 12 and 16) were assessed twice by means of the Coping Responses Inventory - Youth. The results indicated that the coping responses were quite stable over time at the group level, but with important within-subject differences. Girls showed slightly more stability than boys. Among the girls, Avoidance coping showed as much stability as consistency and Approach coping showed more stability than consistency. Among the boys, Avoidance coping showed more stability than consistency, and Approach coping showed both low stability and low consistency. Among the boys, the coping used at Time 1 barely predicted that used at Time 2; in contrast, among the girls, the type of coping used in the past, especially Avoidance coping, predicted the coping that would be used in the future.

A study of the polycomb group complexes in the maintenance of heterochromatic genome stability and Alzheimer's disease.

La démence d'Alzheimer est une maladie neurodégénérative caractérisée par une perte progressive et irreversible des fonctions cognitives et des compétences intellectuelles. La maladie d’Alzheimer se présente sous deux formes: la forme familiale ou précoce (EOAD) qui représente 5% des cas et elle est liée à des mutations génétiques affectant le métabolisme des peptides amyloïde; et la forme tardive ou sporadique (LOAD) qui représente 95% des cas mais son étiologie est encore mal définie. Cependant, le vieillissement reste le principal facteur de risque pour développer LOAD. Les changements épigénétiques impliquant des modifications des histones jouent un rôle crucial dans les maladies neurodégénératives et le vieillissement lié à l'âge. Des données récentes ont décrit LOAD comme un désordre de l'épigénome et ont associé ce trouble à l'instabilité génomique. Les protéines Polycomb sont des modificateurs épigénétiques qui induisent le remodelage de la chromatine et la répression des gènes à l'hétérochromatine facultative. Nous rapportons que les souris hétérozygotes pour une protéine Polycomb développent avec l'âge un trouble neurologique ressemblant à LOAD caractérisé par l’altération des fonctions cognitives, la phosphorylation de la protéine tau, l'accumulation des peptides amyloïde, et le dysfonctionnement synaptique. Ce phénotype pathologique est précédé par la décondensation de l’hétérochromatine neuronale et l'activation de la réponse aux dommages à l'ADN. Parallèlement, une réduction d’expression de polycomb, malformations de l'hétérochromatine neuronale, et l'accumulation de dommages à l'ADN étaient également présents dans les cerveaux de patients LOAD. Remarquablement, les dommages de l'ADN ne sont pas distribués de façon aléatoire sur le génome mais sont enrichis au niveau des séquences répétitives. Les conclusions présentées dans cette thèse ont identifié des modifications épigénétiques spécifiques qui conduisent à une instabilité génomique aberrante menant à la formation de LOAD. Ces résultats vont aider au développement de nouveaux traitements qui peuvent potentiellement ralentir la neurodégénérescence.