Regulación del movimiento y anticipación en el resto del primer servicio en tenis

Aunque se han logrado importantes avances en estudios de laboratorio con diseños experimentales poco representativos (e.g., Farrow y Reid, 2012; Nieminen, Piirainen, Salmi, y Linnamo, 2013), a día de hoy, todavía se desconoce a cabalidad cómo los jugadores de tenis de diferente nivel de pericia calibran o ajustan sus movimientos a las demandas espacio-temporales presentes en la tarea de resto de un primer servicio. ! Escasos trabajos se han llevado a cabo in situ y a la mayoría se les puede cuestionar algún aspecto de la metodología empleada. Así pues, en varios estudios la frecuencia de grabación ha sido limitada (e.g., a 50 Hz en Jackson y Gudgeon, 2004; Triolet, Benguigui, Le Runigo y Williams, 2013), o la velocidad del saque ha sido visiblemente inferior a la habitual (cf. Carboch, Süss y Kocib, 2014; Williams, Singer y Weigelt, 1998). También, en algunos estudios los participantes experimentados no han sido jugadores de nivel internacional (e.g., Avilés, Ruiz, Sanz y Navia, 2014), y el tamaño muestral ha sido muy pequeño (e.g., Gillet, Leroy, Thouvarecq, Mégrot y Stein, 2010). ! Además, en los diferentes trabajos se han utilizado una diversidad de métodos e instrumentos de medida y los criterios de codificación del inicio de los movimientos y de las respuestas han diferido; como consecuencia el lapso visomotor de respuesta (LVMr) ha sido muy dispar variando considerablemente de 198 a 410 ms. Considerando los inconvenientes señalados anteriormente, el presente estudio tuvo como objetivo determinar un modelo técnico de regulación temporal de los movimientos y de la respuesta del restador, tomando en cuenta el flujo continuo de información proporcionado por el sacador. Para ello, se realizó un análisis cronométrico de los restos de doce jugadores de diferente nivel deportivo (seis internacionales y seis nacionales) que respondieron de forma natural enviando sus devoluciones hacia las dianas. Se grabaron las acciones de los restadores y sacadores con una cámara Casio Exilim Pro Ex-F1 de alta velocidad (300 Hz) y luego se realizó un análisis imagen por imagen cada 3.33 ms. Una vez obtenidos los datos de los vídeos se realizaron análisis con las pruebas de ANOVA de un factor, ANCOVA con la velocidad del saque como covariable, U de Mann-Whitney y Chi-cuadrado de Pearson. En cuanto a la regulación del movimiento hasta el momento del despegue, los jugadores internacionales iniciaron sus acciones antes que los jugadores nacionales lo que podría indicar una mejor preparación al ejecutar los movimientos como reflejo del nivel de pericia. Los jugadores internacionales iniciaron la elevación del pie posterior a -293 ms y los jugadores nacionales a -202 ms. Todas estas acciones se fueron enlazando unas con otras y fue en el momento del impacto del sacador donde los restadores demostraron una remarcable coordinación perceptivo-motriz. Por consiguiente, los jugadores internacionales despegaron e iniciaron el vuelo a tan solo -6.5 ms del impacto y los jugadores nacionales lo hicieron más tarde a +19.5 ms. A lo largo de la secuencia temporal, todo parece indicar que las informaciones que utilizan los restadores interactúan entre sí; información más temprana y menos fiable para anticipar o moverse antes e información más tardía y más fiable para regular la temporalización de las acciones. Los restadores de nivel internacional y nacional anticiparon a nivel espacial en un bajo porcentaje (7.7% vs. 13.6%) y en tiempos similares (-127 vs. -118 ms) sugiriendo que la utilización de variables ópticas tempranas y menos fiables solo se produce en contadas ocasiones. Por otra parte, estos datos se relacionan con una gran precisión en la respuesta ya que tanto los jugadores internacionales como los nacionales demostraron un alto porcentaje de acierto al responder (95.4% vs. 96.7%). Se había señalado que los jugadores internacionales y nacionales se diferenciarían en el tiempo de caída (i.e., aterrizaje) del primer pie del salto preparatorio, sin embargo ese efecto no fue encontrado (128 vs. 135 ms). Tampoco se hallaron diferencias en el porcentaje de caída con el pie contrario a la dirección de la pelota (58% vs. 62%). Donde sí ambos grupos se diferenciaron fue en el tiempo de caída del segundo pie (147 vs. 168 ms). Esta diferencia de 21 ms fue crucial y fue una prueba de la mayor rapidez de los jugadores internacionales; sugiriendo que ésta acción se podría relacionar con el momento del inicio de la respuesta. Aunque los jugadores internacionales hayan demostrado ser más rápidos en relación con sus capacidades funcionales, ambos grupos no se diferenciaron en todas las variables relacionadas con el LVMr. Ellos no utilizaron esos valiosos milisegundos ganados en el instante de la caída del segundo pie para responder más pronto, ya que el LVMr del miembro superior fue el mismo para ambos grupos (179 vs. 174 ms). Es como si hubiesen tenido todo el tiempo del mundo para seguir ajustando sus acciones hasta el propio golpeo. Además, estos tiempos largos sugieren que en la gran mayoría de los restos la información clave que determinó la respuesta fue detectada (extraída) en momentos cercanos al golpeo del sacador y en la primera parte del vuelo de la pelota. Asimismo, se constató que en general el LVMr se ve influenciado por el tipo de información utilizada. De esta manera, cuando se tomaron en cuenta los ensayos en los que hubo anticipación espacial reflejados en el LVMr del cuerpo entero los tiempos disminuyeron (152 vs. 136 ms). Por otra parte, existieron ocasiones (13%) en los que tanto los jugadores internacionales como los nacionales respondieron tarde recibiendo saques directos (208 vs. 195 ms). Es muy posible que en estos casos los jugadores hayan tenido problemas para detectar la información respondiendo fuera de los márgenes temporales de acción lo que mermó su rendimiento. Lo mismo pudo haber ocurrido cuando ambos grupos de jugadores corrigieron el movimiento del miembro superior tras el impacto (17% vs. 10%) lo que aumentó el tiempo en responder al redirigir la respuesta hacia el lado correcto (208 vs. 205 ms). Además, los jugadores internacionales obtuvieron tiempos de movimiento menores que el de los jugadores nacionales (509 vs. 531 ms) lo que se reflejó en un tiempo total de actuación menor (683 vs. 703 ms). Por último, en cuanto al rendimiento del resto, los jugadores internacionales obtuvieron valores superiores a los jugadores nacionales (1.3 vs. 0.9). ABSTRACT Although there have been significant advances in laboratory studies with unrepresentative experimental designs (e.g., Farrow y Reid, 2012; Nieminen, Piirainen, Salmi, y Linnamo, 2013), today it is still unknown to full extent how tennis players of different levels of expertise calibrate or adjust their movements to the spatial-temporal demands present in the return of a first serve. Few studies have been carried out in situ and some aspects of the methodology most of them used can be questioned. Thus, in several studies the recording frequency has been limited (e.g., a 50 Hz en Jackson y Gudgeon, 2004; Triolet, Benguigui, Le Runigo y Williams, 2013), or serve speed was visibly lower than the usual one (cf. Carboch, Süss y Kocib, 2014; Williams, Singer y Weigelt, 1998). Also, in some studies, experienced participants have not played at international level (e.g., Avilés, Ruiz, Sanz y Navia, 2014), and the sample size has been very small (e.g., Gillet, Leroy, Thouvarecq, Mégrot y Stein, 2010). Furthermore, different works have used a variety of methods and measurement instruments and coding criteria of the onset of movements and responses have differed; due to this, visuomotor response delay (LVMr) has been very uneven, varying considerably from 198-410 ms. Considering the drawbacks mentioned above, this study aimed to determine a technical model of temporal regulation of movements and returner’s response, taking into account the continuous flow of information provided by the server. For this, a chronometric analysis of the returns of twelve players (six international and six national) of different sports level, that naturally responded by hitting their returns towards the targets, was performed. Actions of servers and returners were recorded with a Casio Exilim Pro Ex-F1 high speed camera (300 Hz) and then every 3.33 ms analysis was made frame by frame. Once the data of the videos were obtained, analyses were performed using one factor ANOVA test, ANCOVA with the speed of the serve as a covariate, U of Mann- Whitney and Pearson’s Chi-square test. As for the regulation of movement until the moment of serve, international players began their actions before national players, which could indicate that they were better prepared to execute movements reflecting the level of their expertise. International players began raising the rear foot at -293 ms and national players at -202 ms. All these actions were being linked to each other and it was at the moment of impact of the server when the receivers demonstrated a remarkable perceptual-motor coordination. Therefore, international players took off and started their flight just -6.5 ms before the serve and national players did the same somewhat later: +19.5 ms after the serve. Along the timeline, everything seems to indicate that the information used by returners interact with each other; early information which is less reliable to anticipate or move before, and later information more reliable appears to regulate the timing of actions. Returners of international and national levels anticipated at spatial level in a low percentage (7.7% vs. 13.6%) and in similar times (-127 vs. -118 ms) suggesting that the use of early and less reliable optical variables is only produced on rare occasions. Moreover, these data relate to a precise response as both international and national players showed a high percentage of success in responding (95.4% vs. 96.7%). It had been noted that international and national players would differ in the time the fall (i.e., landing) of the first foot of the split-step, however, this effect was not found (128 vs. 135 ms). No differences in the percentage of fall with the opposite foot to the direction of the ball (58% vs. 62%) were found. Where the two groups differed was in the time of the fall of the second foot (147 vs. 168 ms). This difference of 21 ms was crucial and it was a proof of mayor speed of international players; suggesting that this action could be related to the onset time of response. Although international players have proven to be faster in relation to their functional capabilities, both groups did not differ in all variables related to LVMr. They did not use those precious milliseconds earned at the time of the fall of the second foot to respond as soon, since the LVMr of the upper limb was the same for both groups (179 vs. 174 ms). It is as if they had all the time in the world to continue to adjust their actions until the return itself. Furthermore, these long times suggest that in the vast majority of the returns, key information that determined the response was detected (pick-up) in moments close to the hit of the server and in the first part of the ball flight. It was also found that in general the LVMr is influenced by the type of information used. Thus, when taking into account the trials during which there was spatial anticipation, reflected in LVMr of the whole body, the times decreased (152 vs. 136 ms). On the other hand, there were occasions (13%) where both international and national players responded late, thus receiving aces (208 vs. 195 ms). It is quite possible that in these cases the players have had trouble to pick-up information, responding out of temporary margins of action, which affected their performance. The same could have occurred when both groups of players corrected upper limb movement after impact (17% vs. 10%), which increased the time to respond and to redirect the return towards the right side (208 vs. 205 ms). Moreover, international players scored lower movement times than the national players (509 vs. 531 ms), which was reflected in a shorter total response time (683 vs. 703 ms). Finally, as far as the performance of return is concerned, international players scored above the national players values (1.3 vs. 0.9).

Biotransformações na obtenção de hidróxi-selenetos e hidróxi-teluretos quirais

Neste trabalho foi estudado o comportamento de hidróxi-calcogenetos (Se e Te) frente a biotransformações, empregando enzimas isoladas em meio orgânico ou aquoso e empregando microorganismos (fungos). Estudos comparativos sobre a influência de diversas variáveis, como solvente, temperatura, imobilização enzimática e estrutura do hidróxi-calcogeneto, foram realizados. Inicialmente os compostos foram sintetizados utilizando métodos descritos na literatura, em seguida foi estudada a resolução de hidróxiselenetos em meio orgânico empregando lipases isoladas (Esquema 1), (ver arquivo), incluindo um estudo de imobilização da PSL em diversos suportes, além do estudo da influência da variação do solvente, da temperatura, da lipase, etc. Na resolução em meio aquoso empregando enzimas isoladas, primeiramente os hidróxi-selenetos foram acetilados quimicamente e depois realizado uma triagem (com dez enzimas de diferentes fontes) empregando indicador de pH colori métrico. Posteriormente os acetatos dos hidróxi-selenetos (Esquema 2) (ver arquivo) foram submetidos à resolução enzimática em meio aquoso empregando as enzimas que foram selecionadas na triagem enzimática. As biotransformações utilizando fungos foram realizadas empregando células inteiras de algumas linhagens de Aspergillus terreus. Na seqüência foi realizada a resolução de hidróxi-teluretos em meio orgânico utilizando lipases isoladas (Esquema 3)(ver arquivo). Nessas resoluções também foi estudada a influência da variação do solvente, da lipase, do tempo, etc. De forma a demonstrar a importância dos compostos resolvidos, um hidróxi-seleneto quiral e dois hidróxi-teluretos quirais foram usados para preparar compostos pertencentes a classes de unidades estruturais de vasta ocorrência em produtos naturais: um álcool alílico e duas lactonas (Esquema 4)(ver arquivo).

Formação de ligação carbono-carbono através de compostos orgânicos de telúrio

Diversas classes de compostos orgânicos de telúrio foram exploradas neste trabalho. Inicialmente foi estudada a transmetalação entre teluretos alílicos e dibutil cianocupratos de lítio de ordem superior, levando aos respectivos cianocupratos alílicos de lítio. Estes, por sua vez, foram acoplados com triflatos vinílicos, importantes intermediários sintéticos preparados previamente a partir de teluretos vinílicos, levando a sistemas altamente insaturados em ótimos rendimentos (Esquema 1). (Ver no arquivo em PDF) Em seguida, foi explorada a reatividade de teluretos aromáticos frente a reagentes organometálicos. Cianocupratos arílicos, gerados a partir da transmetalação entre teluretos aromáticos com cianocupratos de lítio de ordem superior, foram adicionados a cetonas α,β -insaturadas, levando aos produtos de adição 1,4 em bons rendimentos (Esquema 2). (Ver no arquivo em PDF) Teluretos vinílicos funcionalizados de configuração Z também foram alvo de estudo visando a formação de ligação carbono-carbono. Reações de substituição entre estes teluretos e cianocupratos de lítio de ordem inferior levaram a cetonas e ésteres α,β- insaturados com estereoquímica defInida em ótimos rendimentos (Esquema 3). (Ver no arquivo em PDF) De agosto/20OJ a março/2004, a aluna realizou um estágio sanduíche na University of California, Santa Barbara, sob a orientação do Prof. Bruce H. Lipshutz, onde realizou estudos sobre a ciclização de Bergman, visando a síntese do fragmentobiarílico A-B da vancornicina. Diversas condições para a ciclização foram estudadas com um composto modelo (Esquema 4) (Ver no arquivo em PDF) e parte da síntese total do fragmento da vancomlcma, onde a ciclização seria a etapa-chave, foi realizada com sucesso (Esquema 5). (Ver no arquivo em PDF)

Towards a Modeling Environment for Earth Systems Simulations

The developments of models in Earth Sciences, e.g. for earthquake prediction and for the simulation of mantel convection, are fare from being finalized. Therefore there is a need for a modelling environment that allows scientist to implement and test new models in an easy but flexible way. After been verified, the models should be easy to apply within its scope, typically by setting input parameters through a GUI or web services. It should be possible to link certain parameters to external data sources, such as databases and other simulation codes. Moreover, as typically large-scale meshes have to be used to achieve appropriate resolutions, the computational efficiency of the underlying numerical methods is important. Conceptional this leads to a software system with three major layers: the application layer, the mathematical layer, and the numerical algorithm layer. The latter is implemented as a C/C++ library to solve a basic, computational intensive linear problem, such as a linear partial differential equation. The mathematical layer allows the model developer to define his model and to implement high level solution algorithms (e.g. Newton-Raphson scheme, Crank-Nicholson scheme) or choose these algorithms form an algorithm library. The kernels of the model are generic, typically linear, solvers provided through the numerical algorithm layer. Finally, to provide an easy-to-use application environment, a web interface is (semi-automatically) built to edit the XML input file for the modelling code. In the talk, we will discuss the advantages and disadvantages of this concept in more details. We will also present the modelling environment escript which is a prototype implementation toward such a software system in Python (see www.python.org). Key components of escript are the Data class and the PDE class. Objects of the Data class allow generating, holding, accessing, and manipulating data, in such a way that the actual, in the particular context best, representation is transparent to the user. They are also the key to establish connections with external data sources. PDE class objects are describing (linear) partial differential equation objects to be solved by a numerical library. The current implementation of escript has been linked to the finite element code Finley to solve general linear partial differential equations. We will give a few simple examples which will illustrate the usage escript. Moreover, we show the usage of escript together with Finley for the modelling of interacting fault systems and for the simulation of mantel convection.

Exploitation of fibre characteristics in temperature sensing and radio-over-fibre applications

The development of sensing devices is one of the instrumentation fields that has grown rapidly in the last decade. Corresponding to the swift advance in the development of microelectronic sensors, optical fibre sensors are widely investigated because of their advantageous properties over the electronics sensors such as their wavelength multiplexing capability and high sensitivity to temperature, pressure, strain, vibration and acoustic emission. Moreover, optical fibre sensors are more attractive than the electronics sensors as they can perform distributed sensing, in terms of covering a reasonably large area using a single piece of fibre. Apart from being a responsive element in the sensing field, optical fibre possesses good assets in generating, distributing, processing and transmitting signals in the future broadband information network. These assets include wide bandwidth, high capacity and low loss that grant mobility and flexibility for wireless access systems. Among these core technologies, the fibre optic signal processing and transmission of optical and radio frequency signals have been the subjects of study in this thesis. Based on the intrinsic properties of single-mode optical fibre, this thesis aims to exploit the fibre characteristics such as thermal sensitivity, birefringence, dispersion and nonlinearity, in the applications of temperature sensing and radio-over-fibre systems. By exploiting the fibre thermal sensitivity, a fully distributed temperature sensing system consisting of an apodised chirped fibre Bragg grating has been implemented. The proposed system has proven to be efficient in characterising grating and providing the information of temperature variation, location and width of the heat source applied in the area under test.To exploit the fibre birefringence, a fibre delay line filter using a single high-birefringence optical fibre structure has been presented. The proposed filter can be reconfigured and programmed by adjusting the input azimuth of launched light, as well as the strength and direction of the applied coupling, to meet the requirements of signal processing for different purposes in microwave photonic and optical filtering applications. To exploit the fibre dispersion and nonlinearity, experimental investigations have been carried out to study their joint effect in high power double-sideband and single-sideband modulated links with the presence of fibre loss. The experimental results have been theoretically verified based on the in-house implementation of the split-step Fourier method applied to the generalised nonlinear Schrödinger equation. Further simulation study on the inter-modulation distortion in two-tone signal transmission has also been presented so as to show the effect of nonlinearity of one channel on the other. In addition to the experimental work, numerical simulations have also been carried out in all the proposed systems, to ensure that all the aspects concerned are comprehensively investigated.

Kinetic study on thermal decomposition of woods in oxidative environment

The purpose of this work is to gain knowledge on kinetics of biomass decomposition under oxidative atmospheres, mainly examining effect of heating rate on different biomass species. Two sets of experiments are carried out: the first set of experiments is thermal decomposition of four different wood particles, namely aspens, birch, oak and pine under an oxidative atmosphere and analysis with TGA; and the second set is to use large size samples of wood under different heat fluxes in a purpose-built furnace, where the temperature distribution, mass loss and ignition characteristics are recorded and analyzed by a data post-processing system. The experimental data is then used to develop a two-step reactions kinetic scheme with low and high temperature regions while the activation energy for the reactions of the species under different heating rates is calculated. It is found that the activation energy of the second stage reaction for the species with similar constituent fractions tends to converge to a similar value under the high heating rate.

Numerical and statistical analysis of long-haul undersea optical communication systems

Firstly, we numerically model a practical 20 Gb/s undersea configuration employing the Return-to-Zero Differential Phase Shift Keying data format. The modelling is completed using the Split-Step Fourier Method to solve the Generalised Nonlinear Schrdinger Equation. We optimise the dispersion map and per-channel launch power of these channels and investigate how the choice of pre/post compensation can influence the performance. After obtaining these optimal configurations, we investigate the Bit Error Rate estimation of these systems and we see that estimation based on Gaussian electrical current systems is appropriate for systems of this type, indicating quasi-linear behaviour. The introduction of narrower pulses due to the deployment of quasi-linear transmission decreases the tolerance to chromatic dispersion and intra-channel nonlinearity. We used tools from Mathematical Statistics to study the behaviour of these channels in order to develop new methods to estimate Bit Error Rate. In the final section, we consider the estimation of Eye Closure Penalty, a popular measure of signal distortion. Using a numerical example and assuming the symmetry of eye closure, we see that we can simply estimate Eye Closure Penalty using Gaussian statistics. We also see that the statistics of the logical ones dominates the statistics of the logical ones dominates the statistics of signal distortion in the case of Return-to-Zero On-Off Keying configurations.

Pulsed parabolic equation model of acoustic transmission (PPEMAT)

Underwater sound is very important in the field of oceanography where it is used for remote sensing in much the same way that radar is used in atmospheric studies. One way to mathematically model sound propagation in the ocean is by using the parabolic-equation method, a technique that allows range dependent environmental parameters. More importantly, this method can model sound transmission where the source emits either a pure tone or a short pulse of sound. Based on the parabolic approximation method and using the split-step Fourier algorithm, a computer model for underwater sound propagation was designed and implemented. This computer model differs from previous models in its use of the interactive mode, structured programming, modular design, and state-of-the-art graphics displays. In addition, the model maximizes the efficiency of computer time through synchronization of loosely coupled dual processors and the design of a restart capability. Since the model is designed for adaptability and for users with limited computer skills, it is anticipated that it will have many applications in the scientific community.

Testing the universality of free fall with rubidium and ytterbium in a very large baseline atom interferometer

We propose a very long baseline atom interferometer test of Einstein's equivalence principle (EEP) with ytterbium and rubidium extending over 10m of free fall. In view of existing parametrizations of EEP violations, this choice of test masses significantly broadens the scope of atom interferometric EEP tests with respect to other performed or proposed tests by comparing two elements with high atomic numbfers. In the first step, our experimental scheme will allow us to reach an accuracy in the Eotvos ratio of 7 . 10(-13). This achievement will constrain violation scenarios beyond our present knowledge and will represent an important milestone for exploring a variety of schemes for further improvements of the tests as outlined in the paper. We will discuss the technical realisation in the new infrastructure of the Hanover Institute of Technology (HITec) and give a short overview of the requirements needed to reach this accuracy. The experiment will demonstrate a variety of techniques, which will be employed in future tests of EEP, high-accuracy gravimetry and gravity gradiometry. It includes operation of a force-sensitive atom interferometer with an alkaline earth-like element in free fall, beam splitting over macroscopic distances and novel source concepts.

A mixed-split scheme for 2-D DPCM based LSF quantization

In this paper a mixed-split scheme is proposed in the context of 2-D DPCM based LSF quantization scheme employing split vector product VQ mechanism. Experimental evaluation shows that the new scheme is successfully being able to show better distortion performance than existing safety-net scheme for noisy channel even at considerably lower search complexity, by efficiently exploiting LSF trajectory behavior across the consecutive speech frames.

A Harmonic Suppression Scheme for Open-End Winding Split-Phase IM Drive Using Capacitive Filters for the Full Speed Range

Voltage source inverter (VSI)-fed six-phase induction motor (IM) drives have high 6n +/- 1, n = odd-order harmonic currents. This is because these currents, driven by the corresponding harmonic voltages in the inverter output, are limited only by the stator leakage impedance, as these harmonics are absent in the back electromotive force of the motor. To suppress the harmonic currents, either bulky inductive harmonic filters or complex pulsewidth modulation (PWM) techniques have to be used. This paper proposes a harmonic elimination scheme using switched capacitor filters for a VSI-fed split-phase IM drive. Two 3-phase inverters fed from capacitors are used on the open-end side of the motor to suppress 6n +/- 1, n = odd-order harmonics. A PWM scheme that can suppress the harmonics as well as balance the capacitor voltage is also proposed. The capacitor fed inverters are switched so that the fundamental voltage is not affected, and the fundamental power is always drawn from the main inverters. The proposed scheme is verified with a detailed experimental study. The effectiveness of the scheme is demonstrated by comparing the results with those obtained by disabling the capacitor fed inverters.

New finite-difference scheme for simulations of step-index waveguides with tilt interfaces

A new finite-difference scheme is presented for the second derivative of a semivectorial field in a step-index optical waveguide with tilt interfaces. The present scheme provides an accurate description of the tilt interface of the nonrectangular structure. Comparison with previously presented formulas shows the effectiveness of the present scheme.

A two-step backoff scheme for improving the performance of the IEEE 802.11 distributed coordination function

This paper describes the binary exponential backoff mechanism of 802.11 distributed coordination function (DCF), and introduces some methods of modifying the backoff scheme. Then a novel backoff scheme, called Two-step Backoff scheme, is presented and illustrated. The simulation process in OPNET environment has been described also. At last, the analysis and simulation results show that the Two-step backoff scheme can enhance the performance of the IEEE 802.11 DCF.

Image fusion based on median filters and SOFM neural networks: a three-step scheme

This paper presents a new image data fusion scheme by combining median filtering with self-organizing feature map (SOFM) neural networks. The scheme consists of three steps: (1) pre-processing of the images, where weighted median filtering removes part of the noise components corrupting the image, (2) pixel clustering for each image using self-organizing feature map neural networks, and (3) fusion of the images obtained in Step (2), which suppresses the residual noise components and thus further improves the image quality. It proves that such a three-step combination offers an impressive effectiveness and performance improvement, which is confirmed by simulations involving three image sensors (each of which has a different noise structure).