A new algorithm for blind separation of cyclostationary source from linear mixtures

This paper addresses the problem of separating a cyclostationary source from linear mixtures. It first shows that if the cyclic frequencies of the source of interest are known and different from those of the interfering sources, perfect source separation can be achieved using the proposed separation criterion. Then an algorithm is derived to perform the blind source separation. Simulation results demonstrate the validity of the proposed algorithm

Microphone array beamforming approach to blind speech separation

In this paper, we present a microphone array beamforming approach to blind speech separation. Unlike previous beamforming approaches, our system does not require a-priori knowledge of the microphone placement and speaker location, making the system directly comparable other blind source separation methods which require no prior knowledge of recording conditions. Microphone location is automatically estimated using an assumed noise field model, and speaker locations are estimated using cross correlation based methods. The system is evaluated on the data provided for the PASCAL Speech Separation Challenge 2 (SSC2), achieving a word error rate of 58% on the evaluation set.

Blind separation of cyclostationary sources based on phase-frequency redundancy

Thin paper presents a new algorithm for blind source separation (BSS) by exploiting phase and frequency redundancy of cyclostationary signals in a complementary way. The separation criterion is to diagonalize a polynomial matrix whose coefficient matrices consist of the correlation and cyclic correlation matrices of multiple measurements. Computer simulation results illustrate, the performance of the new algorithm in comparison with some existing algorithms.

Blind separation of cyclostationary signals from instantaneous mixtures

This paper presents a new approach for blind separation of unknown cyclostationary signals from instantaneous mixtures. The proposed method can perfectly separate the mixed source signals so long as they have either different cyclic frequencies or clock phases. This is a weaker condition than those required by the algorithms. The separation criterion is to diagonalize a polynomial matrix whose coefficient matrices consist of the correlation and cyclic correlation matrices, at time delay τ=0, of multiple measurements.

A new blind signal separation algorithm for instantaneous MIMO system

We address the problem of adaptive blind source separation (BSS) from instantaneous multi-input multi-output (MIMO) channels. In this paper, we propose a new constant modulus (CM)-based algorithm which employ nonlinear function as the de-correlation term. Moreover, it is shown by theoretical analysis that the proposed algorithm has less mean square error (MSE), i.e., better separation performance, in steady state than the cross-correlation and constant modulus algorithm (CC-CMA). Numerical simulations show the effectiveness of the proposed result.

New blind source estimation methods based on constant modulus criterion

This thesis presents two novel algorithms for blind chancel equalization (BCE) and blind source separation (BSS). Beside these, a general framework for global convergent analysis is proposed. Finally, the open problem of equalising a non-irreducible system is answered by the algorithm proposed in this thesis.

Blind separation of mutually correlated sources using precoders

This paper studies the problem of blind source separation (BSS) from instantaneous mixtures with the assumption that the source signals are mutually correlated.We propose a novel approach to BSS by using precoders in transmitters.We show that if the precoders are properly designed, some cross-correlation coefficients of the coded signals can be forced to be zero at certain time lags. Then, the unique correlation properties of the coded signals can be exploited in receiver to achieve source separation. Based on the proposed precoders, a subspace-based algorithm is derived for the blind separation of mutually correlated sources. The effectiveness of the algorithm is illustrated by simulation examples.

Novel Z-Domain precoding method for blind separation of spatially correlated signals

In this paper, we address the problem of blind separation of spatially correlated signals, which is encountered in some emerging applications, e.g., distributed wireless sensor networks and wireless surveillance systems. We preprocess the source signals in transmitters prior to transmission. Specifically, the source signals are first filtered by a set of properly designed precoders and then the coded signals are transmitted. On the receiving side, the Z-domain features of the precoders are exploited to separate the coded signals, from which the source signals are recovered. Based on the proposed precoders, a closed-form algorithm is derived to estimate the coded signals and the source signals. Unlike traditional blind source separation approaches, the proposed method does not require the source signals to be uncorrelated, sparse, or nonnegative. Compared with the existing precoder-based approach, the new method uses precoders with much lower order, which reduces the delay in data transmission and is easier to implement in practice.

Projection-pursuit-based method for blind separation of nonnegative sources

This paper presents a projection pursuit (PP) based method for blind separation of nonnegative sources. First, the available observation matrix is mapped to construct a new mixing model, in which the inaccessible source matrix is normalized to be column-sum-to-1. Then, the PP method is proposed to solve this new model, where the mixing matrix is estimated column by column through tracing the projections to the mapped observations in specified directions, which leads to the recovery of the sources. The proposed method is much faster than Chan's method, which has similar assumptions to ours, due to the usage of optimal projection. It is also more advantageous in separating cross-correlated sources than the independence- and uncorrelation-based methods, as it does not employ any statistical information of the sources. Furthermore, the new method does not require the mixing matrix to be nonnegative. Simulation results demonstrate the superior performance of our method.

Separation of Doppler radar-based respiratory signatures

Respiration detection using microwave Doppler radar has attracted significant interest primarily due to its unobtrusive form of measurement. With less preparation in comparison with attaching physical sensors on the body or wearing special clothing, Doppler radar for respiration detection and monitoring is particularly useful for long-term monitoring applications such as sleep studies (i.e. sleep apnoea, SIDS). However, motion artefacts and interference from multiple sources limit the widespread use and the scope of potential applications of this technique. Utilising the recent advances in independent component analysis (ICA) and multiple antenna configuration schemes, this work investigates the feasibility of decomposing respiratory signatures into each subject from the Doppler-based measurements. Experimental results demonstrated that FastICA is capable of separating two distinct respiratory signatures from two subjects adjacent to each other even in the presence of apnoea. In each test scenario, the separated respiratory patterns correlate closely to the reference respiration strap readings. The effectiveness of FastICA in dealing with the mixed Doppler radar respiration signals confirms its applicability in healthcare applications, especially in long-term home-based monitoring as it usually involves at least two people in the same environment (i.e. two people sleeping next to each other). Further, the use of FastICA to separate involuntary movements such as the arm swing from the respiratory signatures of a single subject was explored in a multiple antenna environment. The separated respiratory signal indeed demonstrated a high correlation with the measurements made by a respiratory strap used currently in clinical settings.

Hand somatosensory sub-cortical sources arehypoactive in migraine interictally: a functionalsource separation analysis

Background: Recent morpho-functional evidences pointed out that abnormalities in the thalamus could play a major role in the expression of migraine neurophysiological and clinical correlates. Whether this phenomenon is primary or secondary to its functional disconnection from the brain stem remains to be determined.Aim: We used a Functional Source Separation algorithmof EEG signal to extract the activity of the different neuronal pools recruited at different latencies along the somatosensory pathway in interictal migraine without aura(MO) patients. Method: Twenty MO patients and 20 healthy volunteers(HV) underwent EEG recording. Four ad-hoc functional constraints, two sub-cortical (FS14 at brain stem andFS16 at thalamic level) and two cortical (FS20 radial andFS22 tangential parietal sources), were used to extract the activity of successive stages of somatosensory information processing in response to the separate left and right median nerve electric stimulation. A band-pass digital filter (450–750 Hz) was applied offline in order to extract high-frequency oscillatory (HFO) activity from the broadband EEG signal. Results: In both stimulated sides, significant reduced subcortical brain stem (FS14) and thalamic (FS16) HFO activations characterized MO patients when compared with HV. No difference emerged in the two cortical HFO activations between two groups. Conclusion: Present results are the first neurophysiological evidence supporting the hypothesis that a functional disconnection of the thalamus from the subcortical monoaminergicsystem may underline the interictal cortical abnormal information processing in migraine. Further studiesare needed to investigate the precise directional connectivity across the entire primary subcortical and cortical somatosensory pathway in interictal MO.

Motion artefact separation in single channel doppler radar respiration measurement

Direct conversion Doppler radar has the capability to remotely monitor human respiratory activity in a non-contact form. However, the motion or movement from the subject will degrade the acquired respiration signal. As the respiration pattern is one of the essential parameters in respiratory medicine intrinsically containing more information about the respiratory function, it is particularly important to suppress or to separate these motion artefacts in order to reconstruct the corresponding patterns. Experiment results show that EMD-ICA algorithm is capable of separating the mixed respiration signal by recovering the useful information of the breathing pattern as well as the motion signatures using only a single channel measurement when using the source separation algorithm. This reduces the complexity and the cost of the sensing system while removing the undesirable artefacts. A high correlation was also observed from the recovered respiration pattern in comparison to the standard respiration strap for both experiments setup (a seated and a supine position).