Glacier mass balance Vernagtferner, Ötztal Alps, Austria, 1889-2010

In this article, methods and results are presented for the analysis of the behaviour of an alpine glacier, the Vernagtferner, Oetztal Alps, Austria. Since 1601, the advances and retreats of Vernagtferner are documented and analysed with rising temporal and spa- tial precision. Early pictorial documents (from 1601 to 1844), high-resolution maps since 1889, mass balance investigations with the glaciological method since 1964 and meteorological-hydrological records and models since 1974 deliver, with increasing temporal resolution, a consistent pattern of the continual ice loss of this glacier over more than 30 years.

Boston, Massachusetts Region, Digital Elevation Model with Bathymetry

This raster layer represents surface elevation and bathymetry data for the Boston Region, Massachusetts. It was created by merging portions of MassGIS Digital Elevation Model 1:5,000 (2005) data with NOAA Estuarine Bathymetric Digital Elevation Models (30 m.) (1998). DEM data was derived from the digital terrain models that were produced as part of the MassGIS 1:5,000 Black and White Digital Orthophoto imagery project. Cellsize is 5 meters by 5 meters. Each cell has a floating point value, in meters, which represents its elevation above or below sea level.

Boston, Massachusetts Region LIDAR First Return Elevation Data, 2002

LIDAR (LIght Detection And Ranging) first return elevation data of the Boston, Massachusetts region from MassGIS at 1-meter resolution. This LIDAR data was captured in Spring 2002. LIDAR first return data (which shows the highest ground features, e.g. tree canopy, buildings etc.) can be used to produce a digital terrain model of the Earth's surface. This dataset consists of 74 First Return DEM tiles. The tiles are 4km by 4km areas corresponding with the MassGIS orthoimage index. This data set was collected using 3Di's Digital Airborne Topographic Imaging System II (DATIS II). The area of coverage corresponds to the following MassGIS orthophoto quads covering the Boston region (MassGIS orthophoto quad ID: 229890, 229894, 229898, 229902, 233886, 233890, 233894, 233898, 233902, 233906, 233910, 237890, 237894, 237898, 237902, 237906, 237910, 241890, 241894, 241898, 241902, 245898, 245902). The geographic extent of this dataset is the same as that of the MassGIS dataset: Boston, Massachusetts Region 1:5,000 Color Ortho Imagery (1/2-meter Resolution), 2001 and was used to produce the MassGIS dataset: Boston, Massachusetts, 2-Dimensional Building Footprints with Roof Height Data (from LIDAR data), 2002 [see cross references].

Boston, Massachusetts Region, Digital Elevation Model (1:5,000), 2005 - Integer version

This raster layer represents surface elevation for the Boston Region, Massachusetts. This datalayer is a subset (covering only the Boston region) of the Massachusetts statewide digital elevation model. It was created from the digital terrain models that were produced as part of the 1:5,000 Black and White Digital Orthophoto imagery project. Cellsize is 5 meters by 5 meters. Each cell has an integer value, in meters, which represents its elevation above or below sea level.

Boston, Massachusetts Region 1:5,000 Color Ortho Imagery (1/2-meter Resolution), 2001

1/2-meter resolution 1:5,000 orthophoto image of the Boston region from April 2001. This datalayer is a subset (covering only the Boston region) of the Massachusetts statewide orthophoto image series available from MassGIS. It consists of 23 orthophoto quads mosaicked together (MassGIS orthophoto quad ID: 229890, 229894, 229898, 229902, 233886, 233890, 233894, 233898, 233902, 233906, 233910, 237890, 237894, 237898, 237902, 237906, 237910, 241890, 241894, 241898, 241902, 245898, 245902). These medium resolution true color images are considered the new "basemap" for the Commonwealth by MassGIS and the Executive Office of Environmental Affairs (EOEA). MassGIS/EOEA and the Massachusetts Highway Department jointly funded the project. The photography for the mainland was captured in April 2001 when deciduous trees were mostly bare and the ground was generally free of snow. The geographic extent of this dataset is the same as that of the MassGIS dataset: Boston, Massachusetts Region LIDAR First Return Elevation Data, 2002 [see cross references].

Aplicações baseadas em geolocalizações para gestão de instalações desportivas: exemplo de utilização da API da GOOGLE Maps no concelho de Guimarães

O contexto tecnológico em que vivemos é uma realidade. E a tendência é para ser assim também no futuro. Cada vez mais. É o caso das representações de locais e entidades em mapas digitais na web. Na visão de Crocker (2014), esta tendência é ainda mais acentuada, no âmbito das aplicações móveis, como mostram as mais diversas location-based applications. No setor do desporto e da respetiva gestão nem sempre foi fácil desenvolver aplicações, recorrendo a este tipo de representações espaciais. A tecnologia não era fácil e o know-how não era adequadamente qualificado. Mas, as empresas fornecedoras de tecnologia geoespacial simplificaram o desenvolvimento de aplicações web nesta área, através da utilização de application programming interfaces (API). Como refere Svennerberg (2010), estas API’s servem de interface entre um serviço proporcionado por uma empresa, caso da Google Maps (2013) e uma aplicação web ou móvel que utiliza esses serviços. Foi com este objetivo que desenvolvemos uma aplicação web, utilizando as metodologias próprias neste domínio, como a framework de Zachman (2009), tal como foi originalmente adaptada por Whitten e Bentley (2005), onde um dos módulos é precisamente a representação de espaços desportivos, recorrendo à utilização dos serviços da Google Maps. Para além disso, toda a aplicação é suportada numa abordagem Model-View-Control (MVC). Para conseguir representar as instalações desportivas num mapa, criámos uma base de dados MySQL, com dados de longitude e latitude, de cada instalação desportiva. Através de JavaScript criou-se o mapa propriamente dito, indicando o tipo (mapa de estradas, satélite ou street view) e as respetivas opções (nível de zoom, alinhamento, controlo de interface e posicionamente, entre muitas outras opções). O passo seguinte consistiu em passar os dados para o frontend da aplicação web. Para isso, recorreu-se à integração do PHP com as livrarias externas de código JavaSrcipt, criadas especificamente para o efeito (caso da MarkerManager). A implementação destas funcionalidades permite georeferenciar todos os tipos e géneros de espaços desportivos de um concelho, região ou País. Obteve-se ainda know-how, background e massa crítica, para o desenvolvimento de novas funcionalidades. A sua utilização em dispositivos móveis é outra das possibilidades atualmente já em desenvolvimento.

Evaporation maps for ternary non-ideal liquid mixtures

This thesis deals with the evaporation of non-ideal liquid mixtures using a multicomponent mass transfer approach. It develops the concept of evaporation maps as a convenient way of representing the dynamic composition changes of ternary mixtures during an evaporation process. Evaporation maps represent the residual composition of evaporating ternary non-ideal mixtures over the full range of composition, and are analogous to the commonly-used residue curve maps of simple distillation processes. The evaporation process initially considered in this work involves gas-phase limited evaporation from a liquid or wetted-solid surface, over which a gas flows at known conditions. Evaporation may occur into a pure inert gas, or into one pre-loaded with a known fraction of one of the ternary components. To explore multicomponent masstransfer effects, a model is developed that uses an exact solution to the Maxwell-Stefan equations for mass transfer in the gas film, with a lumped approach applied to the liquid phase. Solutions to the evaporation model take the form of trajectories in temperaturecomposition space, which are then projected onto a ternary diagram to form the map. Novel algorithms are developed for computation of pseudo-azeotropes in the evaporating mixture, and for calculation of the multicomponent wet-bulb temperature at a given liquid composition. A numerical continuation method is used to track the bifurcations which occur in the evaporation maps, where the composition of one component of the pre-loaded gas is the bifurcation parameter. The bifurcation diagrams can in principle be used to determine the required gas composition to produce a specific terminal composition in the liquid. A simple homotopy method is developed to track the locations of the various possible pseudo-azeotropes in the mixture. The stability of pseudo-azeotropes in the gas-phase limited case is examined using a linearized analysis of the governing equations. Algorithms for the calculation of separation boundaries in the evaporation maps are developed using an optimization-based method, as well as a method employing eigenvectors derived from the linearized analysis. The flexure of the wet-bulb temperature surface is explored, and it is shown how evaporation trajectories cross ridges and valleys, so that ridges and valleys of the surface do not coincide with separation boundaries. Finally, the assumption of gas-phase limited mass transfer is relaxed, by employing a model that includes diffusion in the liquid phase. A finite-volume method is used to solve the system of partial differential equations that results. The evaporation trajectories for the distributed model reduce to those of the lumped (gas-phase limited) model as the diffusivity in the liquid increases; under the same gas-phase conditions the permissible terminal compositions of the distributed and lumped models are the same.