854 resultados para Sistema de gerenciamento de resíduos
Resumo:
Não disponível
Resumo:
Health Care Waste (HCW) represents 1%, and it has presently gained a lot of importance. Adequate management is one of the great challenges to be faced by health care centers. It has gained distinction and been widely discussed by members of the sectors involved with sanitation, public health and environmental issues due to waste physical, chemical biological characteristics, which pose potential risk to the environment and public health. The present study aims at evaluating HCW internal management by following all its phases, determining indicators, classifying and quantifying, establishing production rates (kg /patient/day) for the sector and designing materials to disseminate appropriate HCW disposal in the Emergency Room of the UNESP University Hospital in the city of Botucatu according to the guidelines presently in force. : From June to October 2011, the waste flow was observed from its production to final disposal. Four weight measurements were performed on four consecutive days in the month of August by using a properly calibrated (in grams) digital scale at the times scheduled for collection of the produced waste. Hence, the daily and monthly amounts were estimated according to their classification. All the waste packaged in the bags in garbage cans in the Emergency Room for a 24-hour period was considered to be a sample. Separation was not adequately performed in that sector, and waste from Group A was mixed with that from Group D. The amount of infectious waste produced in the sector corresponded to 87.80 %, common waste to 10.93 % and recyclable waste to 1.27%. The mean daily HCW production was of 123.300 kg/day, and the total monthly production was of 3,822 kg/month, which was distributed as follows: Group A 3,355,750 kg/month; Group D 417,570 kg/month and recyclables 48,670 kg/month. The production rate corresponded to 0.47 kg/patient/day, thus showing... (Complete abstract click electronic access below)
Resumo:
Introdução: O adequado gerenciamento dos resíduos sólidos domiciliares (RSD) tem se estabelecido nas últimas décadas como um importante instrumento na diminuição do lixo doméstico destinados aos aterros. A compostagem doméstica e a produção de sabão a partir de óleo usado são alternativas para a reciclagem dos RSD que, ao contrário dos lixos recicláveis, não são explorados comercialmente. Assim, o ensino dessas técnicas para a comunidade pode ser uma ferramenta útil na educação ambiental, disseminando práticas que evitam a destinação final de resíduos sólidos em aterros e desenvolvendo valores para a sustentabilidade. Objetivos: Ensinar formas de reciclagem dos RSD através de técnicas de compostagem e produção de sabão a partir de óleo usado, servindo também como instrumento para promover a educação ambiental, e conscientizar a comunidade sobre a importância de um adequado gerenciamento de resíduos. Métodos: As atividades de ensino consistiram em duas partes, unindo teoria e prática, por meio da apresentação de painéis explicativos sobre compostagem, produção de sabão, e sobre as vantagens decorrentes desses processos seguida da realização das técnicas apresentadas, com a produção de sabão em barra e líquido com óleo usado, e pela montagem de pequenas composteiras em garrafões PET de 5 litros de água mineral reaproveitados. Resultados: As atividades foram realizadas em eventos abertos a sociedade de São José do Rio Preto, tais como a Semana da Tecnologia, em outubro de 2010 e a Semana do Meio Ambiente, em junho de 2011, ambas desenvolvidas no SESC (Serviço Social do Comércio) da cidade. O público foi variado, incluindo desde aposentados e donas de casa até estudantes e profissionais de diversos setores. O interesse em anotar as metodologias explicadas culminou na idéia de produzir um material impresso que contivesse as receitas de sabão (líquido e em barra), os procedimentos e dicas de como realizar a compostagem. A convite de uma escola pública, houve também a apresentação das atividades para pais de alunos e funcionários interessados em aprender as práticas para o adequado gerenciamento dos RSD, levando à discussão das possibilidades de implantação de um projeto de compostagem na própria escola.
Resumo:
Pós-graduação em Engenharia Elétrica - FEIS
Resumo:
Pós-graduação em Engenharia Elétrica - FEIS
Resumo:
Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)
Resumo:
With the growth of settlements and the consequent rise in civilian buildings, there was a need to allocate appropriately the waste arising from construction and demolition. Failure to meet the standards set about building waste generate social, economic and environmental impacts of remediation difficult. This study aimed to attend the importance of holding management programs involving the waste of construction and demolition at the University by the resulting environmental, economic and social benefits, and analysis of the main stages of Waste Management of Construction and Demolition, whose based on the National Solid Waste Policy, as well as verification of the importance of implementing these steps in the design of works, assisting in future studies of this type of waste and the problems accompanying the University
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Resumo:
In dentistry, the technic and radiographic processing incur the possibility of cross infection and environmental contamination. The dentist is responsible for the patient and dental team. For this reason he needs to take a protocol to prevent the spread of microorganisms and environmental exposure to risk factors. The protocols are introduced in the dentistry school as an important teaching tool, whose learning and application reinforce the importance of continuity of these actions in the professional activity. The objective of this paper is to present the biosafety and waste management protocol used in the dental radiology clinic of Araçatuba Dental School, including procedures for the prevention of biological and environmental contamination.
Resumo:
Over the last few years, Brazil has some problems related to the management of solid waste, mainly related to the final disposal of materials, resulting in serious environmental risks to the municipalities that suffer from this type of situation. Poorly designed landfills and weak management systems after the termination of their employment, for example, is currently showing as a major problem for urban expansion and the subsoil of these sites, endangering all the environmental quality of the areas where they are located . Because of this scenario, this work produced a diagnosis of the current situation of the management of solid waste in the city of Rio Claro (SP) from its generation, through selective collection and sorting, as well as its final destination, in order to propose a reflection on current form management, in order to present some guidelines based on Federal Law 12.305 / 2010 - National Solid Waste Policy for improvement of this issue in the city. Although the situation found in the city can be considered reasonable for good, there is a need to improve and how to manage, especially in the operational issue of selective collection and also the participation of society in the category Environmental Education, converging in the search for improvements to the common good
Resumo:
As atividades exercidas em uma Instituição acadêmica resultam na formação de diversos tipos de resíduos entre eles um volume considerável daqueles provenientes de celulose, principalmente variedades de papel e papelão, sendo o primeiro utilizado em larga escala para a confecção de objetos para os mais variados fins, de atividades didáticas, usos para fins de limpeza, até documentos. O presente trabalho foi realizado integrado às práticas do projeto PGR (Plano de Gerenciamento de Resíduos) desenvolvido no campus da Unesp de Rio Claro, tendo como objetivo o diagnóstico do gerenciamento dos resíduos de papel e papelão, tais como as práticas de descarte, reciclagem e/ou reutilização vigentes para posterior elaboração de um manual para o gerenciamento ambientalmente correto de tais tipos de resíduos. Para esse levantamento foi elaborado um questionário (Check-list) que foi aplicado nos diferentes setores da UNESP entre Novembro de 2014 e Abril de 2015. A partir desse levantamento preliminar e da quantificação aproximada do montante de resíduos e das porcentagens reutilizadas/recicladas e as descartadas, visou-se propor melhorias no processo de gerenciamento deste tipo de resíduo. O montante de resíduos provenientes de papel gerado nos 50 setores avaliados, sendo 27 do Instituto de Biociências, 21 do Instituto de Geociências e Ciências Exatas e dois de uso comum entre os dois institutos, foi de aproximadamente 190kg de material, embora observado que na maioria das vezes os papéis tenham sido eliminados junto a resíduos de outra natureza, até mesmo orgânicos. Também foram constatadas a proporção de setores que procuram reduzir e reutilizar seus resíduos, sendo que a reutilização de papéis diversos para rascunhos e a utilização de caixas de papelão para o armazenamento de variados objetos foram as práticas mais comumente observadas, sendo apresentadas em maior ou menor grau em 62% dos setores visitados
Resumo:
The construction industry is a large consumer of natural resources and one of the largest generators of residues with significant impacts on the environment. Because of the large production of Construction Industry Residues (RCC), it is essential reliable and updated information about generation, composition and classification sources of these residues, especially for management, recycling and final disposal. RCC represent the most part of solid residues generated in a city. In this way, the management of these residues is an issue that is gaining increasing importance in the Brazilian scenario, since the legal and society requirements to internalize the sustainability in the construction process - since the extraction, use, wastage savings, reutilization until the appropriate discard has been increasing in the last years. The present work objective is updating the quantities produced and collected in Guaratinguetá-SP, based on data collected with the municipal administrative entities that act direct or indirectly in the RCC management, elaborate a detailed bibliographic review, with special attention to the graduate works that were realized in FEG about this theme. With this material, scenarios to a better adequacy of the administrative structure to managements RCC activities, as well as was suggested actions to achieve these scenarios
Resumo:
As atividades exercidas em uma Instituição acadêmica resultam na formação de diversos tipos de resíduos entre eles um volume considerável daqueles provenientes de celulose, principalmente variedades de papel e papelão, sendo o primeiro utilizado em larga escala para a confecção de objetos para os mais variados fins, de atividades didáticas, usos para fins de limpeza, até documentos. O presente trabalho foi realizado integrado às práticas do projeto PGR (Plano de Gerenciamento de Resíduos) desenvolvido no campus da Unesp de Rio Claro, tendo como objetivo o diagnóstico do gerenciamento dos resíduos de papel e papelão, tais como as práticas de descarte, reciclagem e/ou reutilização vigentes para posterior elaboração de um manual para o gerenciamento ambientalmente correto de tais tipos de resíduos. Para esse levantamento foi elaborado um questionário (Check-list) que foi aplicado nos diferentes setores da UNESP entre Novembro de 2014 e Abril de 2015. A partir desse levantamento preliminar e da quantificação aproximada do montante de resíduos e das porcentagens reutilizadas/recicladas e as descartadas, visou-se propor melhorias no processo de gerenciamento deste tipo de resíduo. O montante de resíduos provenientes de papel gerado nos 50 setores avaliados, sendo 27 do Instituto de Biociências, 21 do Instituto de Geociências e Ciências Exatas e dois de uso comum entre os dois institutos, foi de aproximadamente 190kg de material, embora observado que na maioria das vezes os papéis tenham sido eliminados junto a resíduos de outra natureza, até mesmo orgânicos. Também foram constatadas a proporção de setores que procuram reduzir e reutilizar seus resíduos, sendo que a reutilização de papéis diversos para rascunhos e a utilização de caixas de papelão para o armazenamento de variados objetos foram as práticas mais comumente observadas, sendo apresentadas em maior ou menor grau em 62% dos setores visitados
Resumo:
The construction industry is a large consumer of natural resources and one of the largest generators of residues with significant impacts on the environment. Because of the large production of Construction Industry Residues (RCC), it is essential reliable and updated information about generation, composition and classification sources of these residues, especially for management, recycling and final disposal. RCC represent the most part of solid residues generated in a city. In this way, the management of these residues is an issue that is gaining increasing importance in the Brazilian scenario, since the legal and society requirements to internalize the sustainability in the construction process - since the extraction, use, wastage savings, reutilization until the appropriate discard has been increasing in the last years. The present work objective is updating the quantities produced and collected in Guaratinguetá-SP, based on data collected with the municipal administrative entities that act direct or indirectly in the RCC management, elaborate a detailed bibliographic review, with special attention to the graduate works that were realized in FEG about this theme. With this material, scenarios to a better adequacy of the administrative structure to managements RCC activities, as well as was suggested actions to achieve these scenarios
Resumo:
rates in the Brazilian cities, which time there is an inexistent theoretical reflection about public policy statement adding the way of Urban Solid Waste (USW) and tailing integrated management plans in the majorly Brazilian cities. The unappropriated solid waste disposal and final pollution result in a strong socioenvironmental problems and material extravagancies that should be used to recycling and reusing waste material, besides bringing immense challenges for the thematic Strategy Urban and Environmental Management it considers the Sustainable City Model. Moreover, this labor projects a discussion about USW problematic through legally and environmentally point of view, including the public environmental policy and the social technologies as resolution tactics. At that time, it reports rights, scientific articles, documents and Environmental Law Doctrine on findings thematic studies, also the propose displays an interdisciplinary research methodology which combines bibliographic method - focusing theory aspects of the legally environmentally guiding principle, public policy and social technologies. Those are theorist features very important to create a Municipal Integrated Solid Waste Management Plan (PMGIRS) - modus operandi of the Federal Law n. 12.305/2010 (National Solid Waste Policy - PNRS). That policy is interesting to receive financial resources from federal government (Cities Ministry; idem, Federal Decree n. 7.404/2010 and Federal Law n. 10.257/2001) helping the preservation of the environment, regional development, generation of jobs and income (art. 6º), in addition broadening spreading’s private companies dedicated to waste management. Consequently, the PNRS contains a set of guidelines and general procedures; it should be an operation of this legal policy contextualized by Social Technologies theory (TS) into social issues, legal, economic and environmental aspects. Therefore, this research notes the possibility of public policy statement implementation over and done with the PNRS by the terms of development and sustainability in the urban space.