Does Trauma Impair Self-Control? Differences in Delaying Gratification Between Former Indentured Child Laborers and Nontraumatized Controls.

Traumatic experiences may affect an individual's ability to exercise self-control, which is an essential characteristic for successfully managing life. As a measure of self-control, we used the delay discounting paradigm, that is, the extent to which a person devalues delayed gratification. The aim of this study was to investigate the relationship between childhood trauma and delay discounting using a control group design with elderly participants with a mean age of 76.2 years. Swiss former indentured child laborers (n=103) who had been exposed to trauma during their childhood were compared with nontraumatized controls (n=50). The trauma exposure group showed a considerably higher preference for immediate smaller rewards than the controls, indicating their lower self-control. A hierarchical regression analysis revealed that a history of abuse, current self-efficacy, and education were significantly associated with delay discounting. Implications for future research are discussed.

Higher self-control capacity predicts lower anxiety-impaired cognition during math examinations

We assumed that self-control capacity, self-efficacy, and self-esteem would enable students to keep attentional control during tests. Therefore, we hypothesized that the three personality traits would be negatively related to anxiety-impaired cognition during math examinations. Secondary school students (N = 158) completed measures of self-control capacity, self-efficacy, and self-esteem at the beginning of the school year. Five months later, anxiety-impaired cognition during math examinations was assessed. Higher self-control capacity, but neither self-efficacy nor self-esteem, predicted lower anxiety-impaired cognition 5 months later, over and above baseline anxiety-impaired cognition. Moreover, self-control capacity was indirectly related to math grades via anxiety-impaired cognition. The findings suggest that improving self-control capacity may enable students to deal with anxiety-related problems during school tests.

The strengh model of self-control in sport and exercise psychology

The strength model of self-control assumes that all acts of self-control (e.g., emotion regulation, persistence) are empowered by a single global metaphorical strength that has limited capacity. This strength can become temporarily depleted after a primary self-control act, which, in turn, can impair performance in subsequent acts of self-control. Recently, the assumptions of the strength model of self-control also have been adopted and tested in the field of sport and exercise psychology. The present review paper aims to give an overview of recent developments in self-control research based on the strength model of self-control. Furthermore, recent research on interventions on how to improve and revitalize self-control strength will be presented. Finally, the strength model of self-control has been criticized lately, as well as expanded in scope, so the present paper will also discuss alternative explanations of why previous acts of self-control can lead to impaired performance in sport and exercise.

Behavioral self-control : issues in treatment assessment /

Mode of access: Internet.

Self-control grows through discipline /

"August 1972"

Self-control: a novel.

Mode of access: Internet.

Digital geometric-sequence control technique for bidirectional dual active bridge DC-DC converters used in future electric vehicles

Bidirectional DC-DC converters are widely used in different applications such as energy storage systems, Electric Vehicles (EVs), UPS, etc. In particular, future EVs require bidirectional power flow in order to integrate energy storage units into smart grids. These bidirectional power converters provide Grid to Vehicle (V2G)/ Vehicle to Grid (G2V) power flow capability for future EVs. Generally, there are two control loops used for bidirectional DC-DC converters: The inner current loop and The outer loop. The control of DAB converters used in EVs are proved to be challenging due to the wide range of operating conditions and non-linear behavior of the converter. In this thesis, the precise mathematical model of the converter is derived and non-linear control schemes are proposed for the control system of bidirectional DC-DC converters based on the derived model. The proposed inner current control technique is developed based on a novel Geometric-Sequence Control (GSC) approach. The proposed control technique offers significantly improved performance as compared to one for conventional control approaches. The proposed technique utilizes a simple control algorithm which saves on the computational resources. Therefore, it has higher reliability, which is essential in this application. Although, the proposed control technique is based on the mathematical model of the converter, its robustness against parameter uncertainties is proven. Three different control modes for charging the traction batteries in EVs are investigated in this thesis: the voltage mode control, the current mode control, and the power mode control. The outer loop control is determined by each of the three control modes. The structure of the outer control loop provides the current reference for the inner current loop. Comprehensive computer simulations have been conducted in order to evaluate the performance of the proposed control methods. In addition, the proposed control have been verified on a 3.3 kW experimental prototype. Simulation and experimental results show the superior performance of the proposed control techniques over the conventional ones.

Agents and SCT based self* control architecture for production systems

Otto-von-Guericke-Universität Magdeburg, Fakultät für Maschinenbau, Dissertation, 2016

Self-Navigation with Compressed Sensing for 2D Translational Motion Correction in Free-Breathing Coronary MRI: A Feasibility Study.

PURPOSE: Respiratory motion correction remains a challenge in coronary magnetic resonance imaging (MRI) and current techniques, such as navigator gating, suffer from sub-optimal scan efficiency and ease-of-use. To overcome these limitations, an image-based self-navigation technique is proposed that uses "sub-images" and compressed sensing (CS) to obtain translational motion correction in 2D. The method was preliminarily implemented as a 2D technique and tested for feasibility for targeted coronary imaging. METHODS: During a 2D segmented radial k-space data acquisition, heavily undersampled sub-images were reconstructed from the readouts collected during each cardiac cycle. These sub-images may then be used for respiratory self-navigation. Alternatively, a CS reconstruction may be used to create these sub-images, so as to partially compensate for the heavy undersampling. Both approaches were quantitatively assessed using simulations and in vivo studies, and the resulting self-navigation strategies were then compared to conventional navigator gating. RESULTS: Sub-images reconstructed using CS showed a lower artifact level than sub-images reconstructed without CS. As a result, the final image quality was significantly better when using CS-assisted self-navigation as opposed to the non-CS approach. Moreover, while both self-navigation techniques led to a 69% scan time reduction (as compared to navigator gating), there was no significant difference in image quality between the CS-assisted self-navigation technique and conventional navigator gating, despite the significant decrease in scan time. CONCLUSIONS: CS-assisted self-navigation using 2D translational motion correction demonstrated feasibility of producing coronary MRA data with image quality comparable to that obtained with conventional navigator gating, and does so without the use of additional acquisitions or motion modeling, while still allowing for 100% scan efficiency and an improved ease-of-use. In conclusion, compressed sensing may become a critical adjunct for 2D translational motion correction in free-breathing cardiac imaging with high spatial resolution. An expansion to modern 3D approaches is now warranted.

Position sensorless electrically excited synchronous motor drive for industrial use based on direct flux linkage and torque control

Synchronous machines with an AC converter are used mainly in large drives, for example in ship propulsion drives as well as in rolling mill drives in steel industry. These motors are used because of their high efficiency, high overload capacity and good performance in the field weakening area. Present day drives for electrically excited synchronous motors are equipped with position sensors. Most drives for electrically excited synchronous motors will be equipped with position sensors also in future. This kind of drives with good dynamics are mainly used in metal industry. Drives without a position sensor can be used e.g. in ship propulsion and in large pump and blower drives. Nowadays, these drives are equipped with a position sensor, too. The tendency is to avoid a position sensor if possible, since a sensor reduces the reliability of the drive and increases costs (latter is not very significant for large drives). A new control technique for a synchronous motor drive is a combination of the Direct Flux Linkage Control (DFLC) based on a voltage model and a supervising method (e.g. current model). This combination is called Direct Torque Control method (DTC). In the case of the position sensorless drive, the DTC can be implemented by using other supervising methods that keep the stator flux linkage origin centered. In this thesis, a method for the observation of the drift of the real stator flux linkage in the DTC drive is introduced. It is also shown how this method can be used as a supervising method that keeps the stator flux linkage origin centered in the case of the DTC. In the position sensorless case, a synchronous motor can be started up with the DTC control, when a method for the determination of the initial rotor position presented in this thesis is used. The load characteristics of such a drive are not very good at low rotational speeds. Furthermore, continuous operation at a zero speed and at a low rotational speed is not possible, which is partly due to the problems related to the flux linkage estimate. For operation in a low speed area, a stator current control method based on the DFLC modulator (DMCQ is presented. With the DMCC, it is possible to start up and operate a synchronous motor at a zero speed and at low rotational speeds in general. The DMCC is necessary in situations where high torque (e.g. nominal torque) is required at the starting moment, or if the motor runs several seconds at a zero speed or at a low speed range (up to 2 Hz). The behaviour of the described methods is shown with test results. The test results are presented for the direct flux linkage and torque controlled test drive system with a 14.5 kVA, four pole salient pole synchronous motor with a damper winding and electric excitation. The static accuracy of the drive is verified by measuring the torque in a static load operation, and the dynamics of the drive is proven in load transient tests. The performance of the drive concept presented in this work is sufficient e.g. for ship propulsion and for large pump drives. Furthermore, the developed methods are almost independent of the machine parameters.

Accuracy of Impression Techniques for Impants. Part 2-Comparison of Splinting Techniques

Purpose: The aim of this study was to compare splinting techniques for impression copings of osseointegrated implants with different angulations.Materials and Methods: Replicas (N = 24) of a metal matrix (control) containing two implants at 90 degrees and 65 degrees in relation to the horizontal surface were obtained by using four impression techniques: Technique 1 (T1), direct technique with square copings without union in open trays; Technique 2 (T2), square copings splinted with dental floss and autopolymerizing acrylic resin; Technique 3 (T3), square copings splinted with dental floss and autopolymerizing acrylic resin, sectioned and splinted again with autopolymerizing acrylic resin; Technique 4 (T4), square copings splinted with prefabricated acrylic resin bar. The impression material was polyether. The replicas were individually scanned to capture the images, which were assessed in a graphic computation program. The program allowed the angulation between the bases of the replicas and the reading screws to be measured. The images of the replicas were compared with the matrix image (control), and the differences in angulations from the control image were calculated. The analysis of variance and the Tukey test for comparisons (p < 0.05) were used for statistical analysis.Results: All groups showed significant differences in the implant angulations in comparison with the control group (p < 0.05). Group T1 showed the highest difference (1.019 degrees) followed by groups T2 (0.747 degrees), T3 (0.516 degrees), and T4 (0.325 degrees), which showed the lowest angular alteration compared to the control group. There were significant differences between inclined and straight implants in all the groups, except in group T4.Conclusions: Based on the results, the splinting of pick-up impression copings is indicated for osseointegrated implant impressions. The square copings splinted with a prefabricated acrylic resin bar presented the best results among the pick-up impression techniques evaluated in this study.

Early metacognitive abilities: The interplay of monitoring and control processes in 5- to 7-year-old children

The goal of the current investigation was to compare two monitoring processes (judgments of learning [JOLs] and confidence judgments [CJs]) and their corresponding control processes (allocation of study time and selection of answers to maximize accuracy, respectively) in 5- to 7-year-old children (N=101). Children learned the meaning of Japanese characters and provided JOLs after a study phase and CJs after a memory test. They were given the opportunity to control their learning in self-paced study phases, and to control their accuracy by placing correct answers into a treasure chest and incorrect answers into a trash can. All three age groups gave significantly higher CJs for correct compared to incorrect answers, with no age-related differences in the magnitude of this difference, suggesting robust metacognitive monitoring skills in children as young as 5. Furthermore, a link between JOLs and study time was found in the 6- and 7-year-olds, such that children spent more time studying items with low JOLs compared to items with high JOLs. Also, 6- and 7-year-olds but not 5-year-olds spent more time studying difficult items compared to easier items. Moreover, age-related improvements were found in children's use of CJs to guide their selection of answers: although children as young as 5 placed their most confident answers in the treasure chest and least confident answers in the trash can, this pattern was more robust in older children. Overall, results support the view that some metacognitive judgments may be acted upon with greater ease than others among young children.

Ego depletion, attentional control, and decision making in sport

Objectives: Athletes differ at staying focused on performance and avoiding distraction. Drawing on the strength model of self-control we investigated whether athletes do not only differ inter-individually in their disposition of staying focused and avoiding distraction but also intra-individually in their situational availability of focused attention. Design/method: In the present experiment we hypothesized that basketball players (N = 40) who have sufficient self-control resources will perform relatively better on a computer based decision making task under distraction conditions compared to a group who's self-control resources have been depleted in a prior task requiring self-control. Results: The results are in line with the strength model of self-control by demonstrating that an athlete's capability to focus attention relies on the situational availability of self-control strength. Conclusions: The current results indicate that having sufficient self-control strength in interference rich sport settings is likely to be beneficial for decision making.