Adsorption kinetic investigations of phthalocyanine derivatives self assembled monolayers (SAMs) on gold: Temperature influence on the SAM formation process and quality

The ordered nano-structured surfaces, like self-assembled monolayers (SAMs) are of a great scientific interest, due to the low cost, simplicity, and versatility of this method. SAMs found numerous of applications in molecular electronics, biochemistry and optical devices. Phthalocyanine (Pc) complexes are of particular interest for the SAM preparation. These molecules exhibit fascinating physical properties and are chemically and thermally stable. Moreover their complex structure is advantageous for the fabrication of switchable surfaces. In this work the adsorption process of Pcs derivatives, namely, subphthalocyanines (SubPcB) and terbium (2TbPc) sandwich complexes on gold has been investigated. The influence of the molecular concentration, chain length of peripheral groups, and temperature on the film formation process has been examined using a number of techniques. The SAMs formation process has been followed in situ and in real time by means of second harmonic generation (SHG) and surface plasmon resonance (SPR) spectroscopy. To investigate the quality of the SAMs prepared at different temperatures atomic force microscopy (AFM) and X-Ray photoelectron spectroscopy (XPS)measurements were performed. Valuable information about SubPcB and 2TbPc adsorbtion process has been obtained in the frame of this work. The kinetic data, obtained with SHG and SPR, shows the best conformance with the first order Langmuir kinetic model. Comparing SHG and SPR results, it has been found, that the film formation occurs faster than the formation of chemical bonds. Such, the maximum amount of molecules on the surface is reached after 6 min for SubPcB and 30 min for 2TbPc. However, at this time the amount of formed chemicals bonds is only 10% and 40% for SubPcB and 2TbPc, respectively. The most intriguing result, among others, was obtained at T = 2 °C, where the formation of the less dense SAMs have been detected with SHG.However, analyzing XPS and AFM data, it has been revealed, that there is the same amount of molecules on the surface at both temperature T = 2 °C, and T = 21 °C, but the amount of formed chemicals bond is different. At T = 2 °C molecules form aggregates, therefore many of available anchor groups stay unattached.

Explorations of the Practical Issues of Learning Prediction-Control Tasks Using Temporal Difference Learning Methods

There has been recent interest in using temporal difference learning methods to attack problems of prediction and control. While these algorithms have been brought to bear on many problems, they remain poorly understood. It is the purpose of this thesis to further explore these algorithms, presenting a framework for viewing them and raising a number of practical issues and exploring those issues in the context of several case studies. This includes applying the TD(lambda) algorithm to: 1) learning to play tic-tac-toe from the outcome of self-play and of play against a perfectly-playing opponent and 2) learning simple one-dimensional segmentation tasks.

Defects in Self Assembled Colloidal Crystals

Colloidal self assembly is an efficient method for making 3-D ordered nanostructures suitable for materials such as photonic crystals and macroscopic solids for catalysis and sensor applications. Colloidal crystals grown by convective methods exhibit defects on two different scales. Macro defects such as cracks and void bands originate from the dynamics of meniscus motion during colloidal crystal growth while micro defects like vacancies, dislocation and stacking faults are indigenous to the colloidal crystalline structure. This paper analyses the crystallography and energetics of the microscopic defects from the point of view of classical thermodynamics and discusses the strategy for the control of the macroscopic defects through optimization of the liquid-vapor interface.

Student self-assessment a feedback seeking strategy through competence evaluation

There is a body of literature that suggests that student self-assessment is a main goal in higher education (Boud et al., 1995; Tan, 2008); moreover new forms of work organization require a high level of skills and competences. The efforts to deal with competence gaps could be developed at many levels, such as employers, educational institutions, individuals and public agents. Employers could put into practice competence development programs to moderate these gaps. Educational institutions can restructure the curriculum to support students in attaining the competences that are essential in the labour market. Individuals themselves may deploy their resources (time and money) in general or specific competence training. Further, government agencies could fund competence promotion programs. Such challenges for education drive change in learning curricula and method, to properly include the competences required for developing global workers who can move beyond basic competence, to enhanced flexibility and adaptability. In performance assessment methods, there is a shift from the traditional exam-based assessments to more innovative task assessment, which considers performance in multiple different tasks carry out by students. ICTs make it technologically feasible to carry out a complete and complex selfassessment of competences, which provides immediate results to students or other recipients. In the case of students, the evaluation of competences is relevant as developing competences is part - if not all - of the objectives of education. Therefore, it is an important element of the quality of educational organizations (e.g., universities), and of their organizational success. Further, educational organizations may put special emphasis on some differentiating competences, which can be a means of positioning and differentiation from competitors. Competence assessment is an instrument to make students conscious of their strengths and weaknesses, leading to higher motivation to develop their own learning career

Vignettes and self-reported work disability in the United States: Correction of report heterogeneity

Subjective measures of health tend to suffer from bias given by reporting heterogeneity. however, some methodologies are used to correct the bias in order to compare self-assessed health for respondents with different sociodemographic characteristics. One of the methods to correct this is the hierarchical ordered probit (hopit), which includes rates of vignettes -hypothetical individuals with a fixed health state- and where two assumptions have to be fulfilled, vignette equivalence and response consistency. this methodology is used for the self-reported work disability for a sample of the united states for 2011. The results show that even though sociodemographic variables influence rating scales, adjusting for this does not change their effect on work disability, which is only influenced by income. the inclusion of variables related with ethnicity or place of birth does not influence the true work disability. however, when only one of them is excluded, it becomes significant and affects the true level of work disability as well as income.

Evaluation of strategic knowledge of students through authentic tasks of writingin science classroom

The difficulties at evaluating strategic knowledge have been connected to the use of deconxetualized tests that, at the end, do not involve the use of this knowledge. For this reason, an interest in developing authentic writing tasks that offer advantages for these kinds of evaluation have arisen. Throughout this research, authentic writing tasks were developed in a natural sciences class, with the purpose of evaluating the students' strategic knowledge. Different instruments were used to collect data, e.g. Interviews, questionnaires, a self-inform, as well as three samples of writing by the students, with the objective of analyzing the changes that occurred between one and the others, as well as to determine the decisions that students made in order to complete the assigned tasks successfully. An authentic writing task gives great opportunities to evaluate strategic knowledge. These tasks lead students to arrange their knowledge about the topic in hand, organize and adapt it to fit the objectives and the audience, also, it allows them to control and adjust their decisions on the task. This last stage became the perfect opportunity to take notes on the knowledge and regulation of cognitive processes that the students brought into play, as well as to evaluating their understanding of writing and the demands given on the different discursive genres. As a result, the students showed different degrees of strategic knowledge in the task. The students who showed a better strategic knowledge trust in their structural abilities know about discursive genres and have a good performance in basic linguistic abilities. The students who showed weak strategic knowledge distrust their writing skills, seem extremely worried about organizing the content of their texts, fail when checking their writings, and overlook or are unaware of the basic requirements of the discursive genre they are asked to exemplify. It appears that the previous knowledge and experiences at writing the students have been exposed to may affect the strategic knowledge shown when writing in this subject. 

Metacognitive knowledge and self-regulation: A qualitative lecture of students functioning in writing

This research emerges from the world-wide problematic concerning student's failure. It particularly analyzes the meta-cognitive competences in the writing process of this population. Based on Flavell's (1992) viewpoint about meta-cognition and the socio-cognitive approach of self-regulation, two variables were measured: meta-cognitive knowledge and self-regulation strategies. A qualitative study was conducted on a sample of 12 French students at first year university. This study uses a specific technique of interview known as "explicitation interview". The data analysis included the categorization, codification and quantification of the information obtained with the interviews. In conclusion, even though the students had metacognitive knowledge related to the written tasks, they did not show strategies that could help to go beyond the descriptive modality of written discourses by taking into account the readers' expectations. Their writing processes focused on transcription of ideas with little control on the planning and revision phases.

Self-organisation in the assembly of gels from mixtures of different dendritic peptide building blocks

This paper investigates dendritic peptides capable of assembling into nanostructured gels, and explores the effect on self-assembly of mixing different molecular building blocks. Thermal measurements, small angle Xray scattering (SAXS) and circular dichroism (CD) spectroscopy are used to probe these materials on macroscopic, nanoscopic and molecular length scales. The results from these investigations demonstrate that in this case, systems with different "size" and "chirality" factors can self-organise, whilst systems with different "shape" factors cannot. The "size" and "chirality" factors are directly connected with the molecular information programmed into the dendritic peptides, whilst the shape factor depends on the group linking these peptides together-this is consistent with molecular recognition hydrogen bond pathways between the peptidic building blocks controlling the ability of these systems to self-recognise. These results demonstrate that mixtures of relatively complex peptides, with only subtle differences on the molecular scale, can self-organise into nanoscale structures, an important step in the spontaneous assembly of ordered systems from complex mixtures.

Overlapping double turn conformations adopted by tetrapeptides containing non-coded alpha-Amino Isobutyric Acid (AIB) and formation of tape-like structures through supramolecular helix mediated self-assembly

Single crystal X-ray diffraction studies and solvent dependent H-1 NMR titrations reveal that a set of four tetrapeptides with general formula Boc-Xx(1)-Aib(2)-Yy(3)-Zz(4)-OMe, where Xx, Yy and Zz are coded L- amino acids, adopt equivalent conformations that can be described as overlapping double turn conformations stabilized by two 4 -> 1 intramolecular hydrogen bonds between Yy(3)-NH and Boc C=O and Zz(4)-NH and Xx(1)C=O. In the crystalline state, the double turn structures are packed in head-to-tail fashion through intermolecular hydrogen bonds to create supramolecular helical structures. Field emission scanning electron microscopic (FE-SEM) images of the tetrapeptides in the solid state reveal that they can form flat tape-like structures. The results establish that synthetic Aib containing supramolecular helices can form highly ordered self-aggregated amyloid plaque like human amylin.

A method of synthesis of silicious inorganic ordered materials (MCM-41-SBA-1) employing polyacrylic acid-C(n)TAB-TEOS nanoassemblies

In this work we describe the synthesis of a variety of MCM-41 type hexagonal and SBA-1 type cubic mesostructures and mesoporous silicious materials employing a novel synthesis concept based on polyacrylic acid (Pac)-C(n)TAB complexes as backbones of the developing structures. The ordered porosity of the solids was established by XRD and TEM techniques. The synthesis concept makes use of Pac-C(n)TAB nanoassemblies as a preformed scaffold, formed by the gradual increase of pH. On this starting matrix the inorganic precursor species SiO2 precipitate via hydrolysis of TEOS under the influence of increasing pH. The molecular weight (MW) of Pac, as well as the length of carbon chain in C,TAB, determine the physical and structural characteristics of the obtained materials. Longer chain surfactants (C(16)TAB) lead to the formation of hexagonal phase, while shorter chain surfactants (C(14)TAB, C(12)TAB) favor the SBA-1 phase. Lower MW of Pac (approximate to2000) leads to better-organized structures compared to higher MW ( 450,000), which leads to worm-like mesostructures. Cell parameters and pore size increase with increasing polyelectrolyte and/or surfactant chain, while at the same time SEM photography reveals that the particle size decreases. Conductivity experiments provide some insight into the proposed self-assembling pathway. (C) 2003 Elsevier Inc. All rights reserved.

There must be more to development of mindreading and metacognition than passing false belief tasks

We argue that while it is a valuable contribution, Carruthers' Model may be too restrictive to elaborate our understanding of the development of mindreading and metacognition, or to enrich our knowledge of individual differences and psychopathology. To illustrate, we describe pertinent examples where there may be a critical interplay between primitive social-cognitive processes and emerging self-attributions.

Autonomous execution of tasks by swarm carrier agents in swarm-array computing

How can a bridge be built between autonomic computing approaches and parallel computing system? The work reported in this paper is motivated towards bridging this gap by proposing swarm-array computing, a novel technique to achieve autonomy for distributed parallel computing systems. Among three proposed approaches, the second approach, namely 'Intelligent Agents' is of focus in this paper. The task to be executed on parallel computing cores is considered as a swarm of autonomous agents. A task is carried to a computing core by carrier. agents and can be seamlessly transferred between cores in the event of a pre-dicted failure, thereby achieving self-ware objectives of autonomic computing. The feasibility of the proposed approach is validated on a multi-agent simulator.

Swarms of computational resources and swarms of tasks for building reliable systems

Space applications demand the need for building reliable systems. Autonomic computing defines such reliable systems as self-managing systems. The work reported in this paper combines agent based and swarm robotic approaches leading to swarm-array computing, a novel technique to achieve autonomy for distributed parallel computing systems. Two swarm-array computing approaches based on swarms of computational resources and swarms of tasks are explored. FPGA is considered as the computing system. The feasibility of the two proposed approaches that binds the computing system and the task together is simulated on the SeSAm multi-agent simulator.

Relating computer tasks to existing knowledge to improve accessibility for older adults

Routine computer tasks are often difficult for older adult computer users to learn and remember. People tend to learn new tasks by relating new concepts to existing knowledge. However, even for 'basic' computer tasks there is little, if any, existing knowledge on which older adults can base their learning. This paper investigates a custom file management interface that was designed to aid discovery and learnability by providing interface objects that are familiar to the user. A study was conducted which examined the differences between older and younger computer users when undertaking routine file management tasks using the standard Windows desktop as compared with the custom interface. Results showed that older adult computer users requested help more than ten times as often as younger users when using a standard windows/mouse configuration, made more mistakes and also required significantly more confirmations than younger users. The custom interface showed improvements over standard Windows/mouse, with fewer confirmations and less help being required. Hence, there is potential for an interface that closely mimics the real world to improve computer accessibility for older adults, aiding self-discovery and learnability.

Double-gyroid morphology of a polystyrene-block-poly(ferrocenylethylmethylsilane) diblock copolymer: a route to ordered bicontinuous nanoscale architectures

A polystyrene-block-poly(ferrocenylethylmethylsilane) diblock copolymer, displaying a double-gyroid morphology when self-assembled in the solid state, has been prepared with a PFEMS volume fraction phi(PFMS)=0.39 and a total molecular weight of 64 000 Da by sequential living anionic polymerisation. A block copolymer with a metal-containing block with iron and silicon in the main chain was selected due to its plasma etch resistance compared to the organic block. Self-assembly of the diblock copolymer in the bulk showed a stable, double-gyroid morphology as characterised by TEM. SAXS confirmed that the structure belonged to the Ia3d space group.