Occupational exposure to particulate matter and fungi in a composting plant: case study in Portugal

The handling of waste can be responsible for occupational exposure to particles and fungi. The aim of this study was to characterize exposure to particles and fungi in a composting plant. Measurements of particulate matter were performed using portable direct-reading equipment. Air samples of 50L were collected through an impaction method with a flow rate of 140L/min onto malt extract agar supplemented with chloramphenicol (0.05%). Surfaces samples were also collected. All the samples were incubated at 27ºC for 5 to 7 days. Particulate matter data showed higher contamination for PM, and PM10 sizes. Aspergillus genus presents the highest air prevalence (90.6%). Aspergillus niger (32.6%), A. fumigatus (26.5%) and A. flavus (16.3%) were the most prevalent fungi in air sampling, and Mucor sp. (39.2%), Aspergillus niger (30.9%) and A. fumigatus (28.7%) were the most found in surfaces. the results obtained claim the attention to the need of further research.

The portuguese public administration reforms potencial impact in the development of civil servants work related stress : SIADAP case

Poster apresentado na 8.ª Conferência da European Academy of Occupational Health Psychology, em Valencia, 12-14 de novembro de 2008.

Defining risk acceptance criteria in occupational settings: A case study in the furniture industrial sector

The use of appropriate acceptance criteria in the risk assessment process for occupational accidents is an important issue but often overlooked in the literature, particularly when new risk assessment methods are proposed and discussed. In most cases, there is no information on how or by whom they were defined, or even how companies can adapt them to their own circumstances. Bearing this in mind, this study analysed the problem of the definition of risk acceptance criteria for occupational settings, defining the quantitative acceptance criteria for the specific case study of the Portuguese furniture industrial sector. The key steps to be considered in formulating acceptance criteria were analysed in the literature review. By applying the identified steps, the acceptance criteria for the furniture industrial sector were then defined. The Cumulative Distribution Function (CDF) for the injury statistics of the industrial sector was identified as the maximum tolerable risk level. The acceptable threshold was defined by adjusting the CDF to the Occupational, Safety & Health (OSH) practitioners’ risk acceptance judgement. Adjustments of acceptance criteria to the companies’ safety cultures were exemplified by adjusting the Burr distribution parameters. An example of a risk matrix was also used to demonstrate the integration of the defined acceptance criteria into a risk metric. This work has provided substantial contributions to the issue of acceptance criteria for occupational accidents, which may be useful in overcoming the practical difficulties faced by authorities, companies and experts.

Toward a Run-Time Verification Framework for Real-Time Safety-Critical Systems

Presented at SEMINAR "ACTION TEMPS RÉEL:INFRASTRUCTURES ET SERVICES SYSTÉMES". 10, Apr, 2015. Brussels, Belgium.

In situ measured cross section geometry of old timber structures and its influence on structural safety

Old timber structures may show significant variation in the cross section geometry along the same element, as a result of both construction methods and deterioration. As consequence, the definition of the geometric parameters in situ may be both time consuming and costly. This work presents the results of inspections carried out in different timber structures. Based on the obtained results, different simplified geometric models are proposed in order to efficiently model the geometry variations found. Probabilistic modelling techniques are also used to define safety parameters of existing timber structures, when subjected to dead and live loads, namely self-weight and wind actions. The parameters of the models have been defined as probabilistic variables, and safety of a selected case study was assessed using the Monte Carlo simulation technique. Assuming a target reliability index, a model was defined for both the residual cross section and the time dependent deterioration evolution. As a consequence, it was possible to compute probabilities of failure and reliability indices, as well as, time evolution deterioration curves for this structure. The results obtained provide a proposal for definition of the cross section geometric parameters of existing timber structures with different levels of decay, using a simplified probabilistic geometry model and considering a remaining capacity factor for the decayed areas. This model can be used for assessing the safety of the structure at present and for predicting future performance.

Safety function analysis in an industrial production process

Dissertação para obtenção do Grau de Mestre em Engenharia e Gestão Industrial

Low Dose Thalidomide for Treatment of Resistant Discoid Lupus Erythematosus. A Case Report

Discoid lupus erythematosus (DLE) is a chronic, indolent, disfiguring disease that is characterized by scaly, erythematous, disk-shaped patches and plaques followed by atrophy, scarring and depigmentation. In a small number of patients, it is refractory to standard therapies. In several studies, thalidomide has been reported to be an effective treatment in those cases. The most fearful side effects are teratogenicity and neuropathy. Adequate counseling and vigilance must be given to the patients. We report a 45-year-old Portuguese woman who presented with a 20-year history of severe facial and scalp DLE confirmed by histopathology. For several years, it failed to respond to several therapies, including topical, intralesional and oral corticosteroids, hydroxychloroquine, methotrexate, azathioprine and topical tacrolimus. Thalidomide was initiated at a dosage of 50mg/day and the skin lesions had improved dramatically after three weeks with complete clinical remission. Two months later, the dose was reduced to 50mg, five days per week without disease rebound. The patient´s concomitant medications during the treatment included sunscreen, hydroxycholoroquine, enoxaparin and aspirin to prevent thromboembolic events. Pregnancy testing, routine laboratory and electrocardiography were performed at regular intervals for safety monitoring and the results were within normal limits. Only minor side effects as nausea, constipation and somnolence were noted, however, they improved with dose reduction. Our data confirm that thalidomide therapy is an alternative or adjunctive treatment for patients with severe, chronic DLE that is refractory to standard therapies. In this patient, low-dose thalidomide was an effective treatment with minimal side effects.

Outbreak of laboratory-acquired Brucella abortus in Brazil: a case report

Human brucellosis is an occupational disease affecting workers in slaughterhouses, butcher shops and the milk and dairy product industry as well as individuals who work in clinical or research laboratories. We report the first outbreak of a Brucella abortus infection in a Brazilian laboratory and compare the data obtained with reports available in the literature. Exposure was a result of damage to a biological safety cabinet and failure of the unidirectional airflow ventilation system. An epidemiological investigation identified 3 seroconverted individuals, 1 of whom had clinical manifestations and laboratory results compatible with infection at the time of exposure (n=11; attack rate=9.1%).

Implementation of a probabilistic based framework for safety assessment of existing timber elements

The assessment of existing timber structures is often limited to information obtained from non or semi destructive testing, as mechanical testing is in many cases not possible due to its destructive nature. Therefore, the available data provides only an indirect measurement of the reference mechanical properties of timber elements, often obtained through empirical based correlations. Moreover, the data must result from the combination of different tests, as to provide a reliable source of information for a structural analysis. Even if general guidelines are available for each typology of testing, there is still a need for a global methodology allowing to combine information from different sources and infer upon that information in a decision process. In this scope, the present work presents the implementation of a probabilistic based framework for safety assessment of existing timber elements. This methodology combines information gathered in different scales and follows a probabilistic framework allowing for the structural assessment of existing timber elements with possibility of inference and updating of its mechanical properties, through Bayesian methods. The probabilistic based framework is based in four main steps: (i) scale of information; (ii) measurement data; (iii) probability assignment; and (iv) structural analysis. In this work, the proposed methodology is implemented in a case study. Data was obtained through a multi-scale experimental campaign made to old chestnut timber beams accounting correlations of non and semi-destructive tests with mechanical properties. Finally, different inference scenarios are discussed aiming at the characterization of the safety level of the elements.

Safety classification using GIS in decision-making process to define priority road interventions

Given the current economic situation of the Portuguese municipalities, it is necessary to identify the priority investments in order to achieve a more efficient financial management. The classification of the road network of the municipality according to the occurrence of traffic accidents is fundamental to set priorities for road interventions. This paper presents a model for road network classification based on traffic accidents integrated in a geographic information system. Its practical application was developed through a case study in the municipality of Barcelos. An equation was defined to obtain a road safety index through the combination of the following indicators: severity, property damage only and accident costs. In addition to the road network classification, the application of the model allows to analyze the spatial coverage of accidents in order to determine the centrality and dispersion of the locations with the highest incidence of road accidents. This analysis can be further refined according to the nature of the accidents namely in collision, runoff and pedestrian crashes.

An investigation of safety design practices of metal machines

BACKGROUND: Machinery safety issues are a challenge facing manufacturers who are supposed to create and provide products in a better and faster way. In spite of their construction and technological advance, they still contribute to many potential hazards for operators and those nearby. OBJECTIVE: The aim of this study is to investigate safety aspects of metal machinery offered for sale on Internet market according to compliance with minimum and fundamental requirements. METHODS: The study was carried out with the application of a checklist prepared on the basis of Directive 2006/42/EC and Directive 2009/104/EC and regulations enforcing them into Polish law. RESULTS: On the basis of the study it was possible to reveal the safety aspects that were not met in practice. It appeared that in the case of minimum requirements the most relevant problems concerned information, signal and control elements, technology and machinery operations, whereas as far as fundamental aspects are concerned it was hard to assure safe work process. CONCLUSIONS: In spite of the fact that more and more legal acts binding in the Member Countries of the European Union are being introduced to alleviate the phenomenon, these regulations are often not fulfilled.

Economic evaluation of occupational safety preventive measures in a hospital

BACKGROUND: When an organization performs an integrated analysis of risks through its Occupational Health and Safety Management System, several steps are suggested to address the implications of the identified risks. Namely, the organization should make a detailed analysis of the monetary impact for the organization of each of the preventive measures considered. However, it is also important to perform an analysis of the impact of each measure on society (externalities). OBJECTIVE: The aim of this paper is to present a case study related to the application of the proposed economic evaluation methodology. METHODS: An analysis of the work accidents in a hospital has been made. Three of the major types of accidents have been selected: needle stings, falls and excessive strain. Following the risk assessment, some preventive measures have been designed. Subsequently, the Benefit/Cost ratio (B/C) of these measures has been calculated, both in financial terms (from the organization’s perspective) and in economic terms (including the benefits for the worker and for the Society). RESULTS: While the financial ratio is only advantageous in some cases, when the externalities are taken into account, the B/C ratio increases significantly. CONCLUSIONS: It is important to consider external

Defining risk acceptance criteria in occupational settings: A case study in the furniture industrial sector

The use of appropriate acceptance criteria in the risk assessment process for occupational accidents is an important issue but often overlooked in the literature, particularly when new risk assessment methods are proposed and discussed. In most cases, there is no information on how or by whom they were defined, or even how companies can adapt them to their own circumstances. Bearing this in mind, this study analysed the problem of the definition of risk acceptance criteria for occupational settings, defining the quantitative acceptance criteria for the specific case study of the Portuguese furniture industrial sector. The key steps to be considered in formulating acceptance criteria were analysed in the literature review. By applying the identified steps, the acceptance criteria for the furniture industrial sector were then defined. The Cumulative Distribution Function (CDF) for the injury statistics of the industrial sector was identified as the maximum tolerable risk level. The acceptable threshold was defined by adjusting the CDF to the Occupational, Safety & Health (OSH) practitioners’ risk acceptance judgement. Adjustments of acceptance criteria to the companies’ safety cultures were exemplified by adjusting the Burr distribution parameters. An example of a risk matrix was also used to demonstrate the integration of the defined acceptance criteria into a risk metric. This work has provided substantial contributions to the issue of acceptance criteria for occupational accidents, which may be useful in overcoming the practical difficulties faced by authorities, companies and experts.

Electroconvulsive therapy and anticoagulation after pulmonary embolism: a case report

Introduction Electroconvulsive therapy (ECT) is considered the most effective treatment for catatonia regardless its underlying condition. The rigid fixed posture and immobility observed in catatonia may lead to several clinical complications, of which, pulmonary embolism (PE) is one of the most severe. The rapid improvement of the psychiatric condition in catatonia-related PE is essential, since immobility favors the occurrence of new thromboembolic events and further complications. In that scenario, ECT should be considered, based on a risk-benefit analysis, aiming at the faster resolution of the catatonia. Methods Case report and literature review. Results A 66-years-old woman admitted to the psychiatric ward with catatonia due to a depressive episode presented bilateral PE. Clinically stable, but still severely depressed after a trial of antidepressants, she was treated with ECT in the course of full anticoagulation with enoxaparin. After five ECT sessions, her mood was significantly better and she was walking and eating spontaneously. She did not present complications related either to PE or to anticoagulation. After the eighth ECT session, she evolved with hypomania, which was managed with oral medication adjustments. The patient was completely euthymic at discharge. Conclusion The case we presented provides further evidence to the anecdotal case reports on the safety of ECT in the course of concomitant full anticoagulant therapy after PE, and illustrates how, with the proper precautions, the benefits of ECT in such condition might outweigh its risks.

Coronary arterial disease after electroconvulsive therapy: a case report

Objectives Unipolar depression (UPD) is a leading cause of global burden of diseases, particularly among the elderly, whose treatment may be challenging. In such cases, ECT is often recommended due to its safety and efficacy. This report presents a case of a 67-year-old male inpatient that developed a rare cardiac complication during ECT. Methods Clinical case report with patient’s consent and bibliographic review. Results A 67-year-old male inpatient with recurrent severe psychotic depression was hospitalized and ECT was indicated after failure of the pharmacological treatment. A comprehensive clinical pre-evaluation revealed only nonspecific ST-segment changes in electrocardiogram. During the 7th ECT session, it was observed transitory ST-segment depression followed by a discrete increase of plasma troponin I. Severe tri-vessel coronary artery stenosis was found and a percutaneous coronary angioplasty was performed, with satisfactory psychiatric and cardiac outcomes. Conclusions Unipolar depression (UPD) and cardiovascular disease are often coexistent conditions, especially among the elderly. In the current case, myocardial ischemia was detected lately during ECT therapy and its treatment allowed the UPD treatment to be completed adequately.