Comparative study of anchorage strengths of epoxy coated hooked bars

Hooked reinforcing bars (rebar) are used frequently to carry the tension forces developed in beams and transferred to columns. Research into epoxy coated hooked bars has only been minimally performed and no research has been carried out incorporating the coating process found in ASTM A934. This research program compares hooked rebar that are uncoated, coated by ASTM A775, and coated by ASTM A934. In total, forty-two full size beam-column specimens were created, instrumented and tested to failure. The program was carried out in three phases. The first phase was used to refine the test setup and procedures. Phase two explored the spacing of column ties within the joint region. Phase three explored the three coating types found above. Each specimen included two hooked rebar which were loaded and measured independently for relative rebar slip. The load and displacement of the hooked rebar were analyzed, focusing on behavior at the levels of 30 ksi, 42 ksi and 60 ksi of rebar stress. Statistical and general comparisons were made using the coating types, tie spacing, and rebar stress level. Many of the parameters composing the rebar and concrete were also tested to characterize the components and specimens. All rebar tested met ASTM standards for tensile strength, but the newer ASTM A934 method seemed to produce slightly lower yield strengths. The A934 method also produced coating thicknesses that were very inconsistent and were higher than ASTM maximum limits in many locations. Continuity of coating surfaces was found to be less than 100% for both A775 and A934 rebar, but for different reasons. The many comparisons made did not always produce clear conclusions. The data suggests that the ACI Code (318-05) parameter of 1.2 for including epoxy coating on hooked rebar may need to be raised, possibly to 2.5, but more testing needs to be performed before such a large value change is set forth. This is particularly important as variables were identified which may have a larger influence on rebar capacity than the Development Length, of which the current 1.2 factor modifies. Many suggestions for future work are included throughout the thesis to help guide other researchers in carrying out successful and productive programs which will further the highly understudied topic of hooked rebar.

Veridicality of self-concept of strengths in male adolescents

Changes in physical self-concept and veridicality (i.e., the appropriateness of one’s self-perceptions to reality) during childhood and adolescence are related to performance in physical fi tness, exercise, and global self-esteem, particularly in male adolescents. This cross-sectional study examined the relation between the self-concept of strength and actual strength in groups of male adolescents ages 12 to 15 years. For this purpose, 889 male adolescents (M age = 13.2 yr., SD = 1.0) were questioned about their self-concept of strength, after which a test of strength was carried out. The results showed that the correlation between self- concept of strength and actual strength was higher in older (14- and 15-year-old) than younger (12- and 13-year-old) adolescents. There was a statistically signifi cant association between age group and veridicality, indicating that realistic self-concept is underrepresented among younger, but overrepresented among older adolescents. No association was found between the adolescents’ physical activity and veridicality. The consequences for further research on the development of veridicality in the physical domain are discussed.

Immediate shear bond strengths of a composite, a compomer and a glass ionomer to a ceramic substrate.

PURPOSE To determine the best-performing combination of three core buildup materials and three bonding materials based on their bond strength to ceramic blocks in vitro. MATERIALS AND METHODS The materials used for core buildup were a composite (Tetric EvoCeram), a compomer (Compoglass F), and a glass-ionomer cement (Ketac Fil Plus), and for bonding, a three-step etch-and-rinse adhesive (Syntac), a two-step etch-and-rinse adhesive (ExciTE), and a single-step system (RelyX Unicem). Bond strength to ceramic blocks was determined by shear bond strength testing. Fracture behavior was evaluated by scanning electron microscopy. RESULTS The highest adhesive values between buildup and ceramic were obtained using the materials Compoglass F and Syntac, followed by Compoglass F and ExciTE. Among the two other core buildups, Tetric EvoCeram performed better than Ketac Fil Plus, which was independent of the bonding materials. Adhesive fractures were characteristically observed with Syntac and ExciTE, and cohesive fractures were characteristically observed with RelyX Unicem. CONCLUSION These data show that compomers bonded with a multistep adhesive system achieved statistically significantly higher shear bond strength than composites and glass-ionomer cements. Within the limitations inherent to this in vitro study, the use of compomers for core buildup can be recommended.

Human Trafficking Victims and Their Children: Assessing Needs, Vulnerabilities, Strengths, and Survivorship

Given the increased awareness and attention to human trafficking, including the establishment of federal laws and policies, federally funded task forces that provide law enforcement responses, and specialized victim services, it is important to assess the impact of these procedures and services on survivors/victims of international human trafficking and their immigrant children. By federal definition, certified victims of international human trafficking are eligible for all services provided to refugees in this country, including reunification with their minor children. This research is based on a qualitative study conducted in Austin and Houston, Texas with human trafficking victims/survivors. The project’s goal was to gain an understanding of the needs of human trafficking survivors after their rescue, their overall integration into American life, and the subsequent needs of their immigrant children after reunification. The project objectives examined the factors that either promote or hinder self-sufficiency, the determination of social service needs, and policy and practice recommendations to strengthen survivors, their children and their families living both locally and abroad. For this project, nine (n = 9) in-depth interviews were conducted with adult foreign-born victims of human trafficking. Researchers gathered data using a semi-structured questionnaire that queried about factors that promote or hinder victims’ services and needs. Interviews were conducted in participants’ homes using bilingual research staff and/or trained interpreters, were digitally-recorded, and subsequently transcribed. Participation in this study was completely voluntary. Specific steps were taken to ensure that the participants’ identities were protected. Open coding of data was utilized and the data were subsequently organized or grouped into properties and later developed into contextual themes around the research questions. The findings are grounded with the use of direct quotes from participants. As a result of progressive U.S. policy, many victims of human trafficking are being reunited with their minor children. Immigrant children are one of the largest and fastest growing populations in the U.S. and for a variety of reasons are vulnerable to exploitation. Research also indicates that victims of trafficking are identified by traffickers because of their perceived “vulnerabilities” or lack of opportunities (Clark, 2003). Therefore, it is important that practices and policies are developed to address the unique needs of these families with an eye toward positive outcomes for parent and child safety and well-being. Social service providers are provided a toolkit that may be utilized before and during the reunification period.

Commentary: “Human Trafficking Victims and Their Children: Assessing Needs, Vulnerabilities, Strengths, and Survivorship"

A commentary on Busch-Armendariz, Nsonwu, and Heffron’s article, “Human Trafficking Victims and Their Children: Assessing Needs, Vulnerabilities, Strengths, and Survivorship,” noting key findings and calling for further research.

Practitioners' Views of Family Strengths: A Delphi Study

Reported is a research study to assess the opinions of family practitioners on the status of families in Oklahoma. Researchers employed the Delphi method to achieve consensus among key informants in the family practice field about the strengths and weaknesses of Oklahoma families, threats facing families in the state, and means to strengthening family life in Oklahoma. The study yielded qualitative data from the key informants, which the researchers then condensed into response categories to feed back to informants to rate. Family practitioners identified resilience, spirituality, and access to support systems as the greatest strengths, and listed substance abuse, poverty, and generational cycles of dysfunction as the greatest weaknesses of Oklahoma families. Recommendations by these practitioners are given for improvements in addressing family needs.

Commentary on "Practitioners’ Views of Family Strengths: A Delphi Study"

Commentary on "Practitioners’ Views of Family Strengths: A Delphi Study"

A regional climate palaeosimulation for Europe in the period 1500–1990 – Part 2: Shortcomings and strengths of models and reconstructions

This study compares gridded European seasonal series of surface air temperature (SAT) and precipitation (PRE) reconstructions with a regional climate simulation over the period 1500–1990. The area is analysed separately for nine subareas that represent the majority of the climate diversity in the European sector. In their spatial structure, an overall good agreement is found between the reconstructed and simulated climate features across Europe, supporting consistency in both products. Systematic biases between both data sets can be explained by a priori known deficiencies in the simulation. Simulations and reconstructions, however, largely differ in the temporal evolution of past climate for European subregions. In particular, the simulated anomalies during the Maunder and Dalton minima show stronger response to changes in the external forcings than recorded in the reconstructions. Although this disagreement is to some extent expected given the prominent role of internal variability in the evolution of regional temperature and precipitation, a certain degree of agreement is a priori expected in variables directly affected by external forcings. In this sense, the inability of the model to reproduce a warm period similar to that recorded for the winters during the first decades of the 18th century in the reconstructions is indicative of fundamental limitations in the simulation that preclude reproducing exceptionally anomalous conditions. Despite these limitations, the simulated climate is a physically consistent data set, which can be used as a benchmark to analyse the consistency and limitations of gridded reconstructions of different variables. A comparison of the leading modes of SAT and PRE variability indicates that reconstructions are too simplistic, especially for precipitation, which is associated with the linear statistical techniques used to generate the reconstructions. The analysis of the co-variability between sea level pressure (SLP) and SAT and PRE in the simulation yields a result which resembles the canonical co-variability recorded in the observations for the 20th century. However, the same analysis for reconstructions exhibits anomalously low correlations, which points towards a lack of dynamical consistency between independent reconstructions.

Strengths, weaknesses, opportunities and threats: A SWOT analysis of the ecosystem services framework

The ecosystem services concept (ES) is becoming a cornerstone of contemporary sustainability thought. Challenges with this concept and its applications are well documented, but have not yet been systematically assessed alongside strengths and external factors that influence uptake. Such an assessment could form the basis for improving ES thinking, further embedding it into environmental decisions and management. The Young Ecosystem Services Specialists (YESS) completed a Strengths–Weaknesses–Opportunities–Threats (SWOT) analysis of ES through YESS member surveys. Strengths include the approach being interdisciplinary, and a useful communication tool. Weaknesses include an incomplete scientific basis, frameworks being inconsistently applied, and accounting for nature's intrinsic value. Opportunities include alignment with existing policies and established methodologies, and increasing environmental awareness. Threats include resistance to change, and difficulty with interdisciplinary collaboration. Consideration of SWOT themes suggested five strategic areas for developing and implementing ES. The ES concept could improve decision-making related to natural resource use, and interpretation of the complexities of human-nature interactions. It is contradictory – valued as a simple means of communicating the importance of conservation, whilst also considered an oversimplification characterised by ambiguous language. Nonetheless, given sufficient funding and political will, the ES framework could facilitate interdisciplinary research, ensuring decision-making that supports sustainable development.

Gravitational slopes, geomorphology, and material strengths of the nucleus of comet 67P/Churyumov-Gerasimenko from OSIRIS observations

Aims. We study the link between gravitational slopes and the surface morphology on the nucleus of comet 67P/Churyumov-Gerasimenko and provide constraints on the mechanical properties of the cometary material (tensile, shear, and compressive strengths). Methods. We computed the gravitational slopes for five regions on the nucleus that are representative of the different morphologies observed on the surface (Imhotep, Ash, Seth, Hathor, and Agilkia), using two shape models computed from OSIRIS images by the stereo-photoclinometry (SPC) and stereo-photogrammetry (SPG) techniques. We estimated the tensile, shear, and compressive strengths using different surface morphologies (overhangs, collapsed structures, boulders, cliffs, and Philae's footprint) and mechanical considerations. Results. The different regions show a similar general pattern in terms of the relation between gravitational slopes and terrain morphology: i) low-slope terrains (0-20 degrees) are covered by a fine material and contain a few large (>10 m) and isolated boulders; ii) intermediate-slope terrains (20-45 degrees) are mainly fallen consolidated materials and debris fields, with numerous intermediate-size boulders from <1m to 10m for the majority of them; and iii) high-slope terrains (45-90 degrees) are cliffs that expose a consolidated material and do not show boulders or fine materials. The best range for the tensile strength of overhangs is 3-15 Pa (upper limit of 150 Pa), 4-30 Pa for the shear strength of fine surface materials and boulders, and 30-150 Pa for the compressive strength of overhangs (upper limit of 1500 Pa). The strength-to-gravity ratio is similar for 67P and weak rocks on Earth. As a result of the low compressive strength, the interior of the nucleus may have been compressed sufficiently to initiate diagenesis, which could have contributed to the formation of layers. Our value for the tensile strength is comparable to that of dust aggregates formed by gravitational instability and tends to favor a formation of comets by the accrection of pebbles at low velocities.