Variation of cutting rooting ability in cultivated and wild species of Macadamia

In Australia, macadamia trees are commonly propagated by germinating rootstock seed and grafting when seedlings reach a suitable size. The production of grafted trees is a protracted and complex process, however, propagation of macadamia via cuttings represents a simpler and faster method of multiplication. Macadamias have traditionally proven difficult to propagate from cuttings, and while recent developments in the process have improved success rates, substantial variation in rooting ability between cultivars and species has been reported. The cultivar 'Beaumont' (Macadamia integrifolia × M. tetraphylla) is commonly propagated by cutting for use as a rootstock, and is relatively easy to strike while other cultivars are more difficult. There is speculation that Hawaiian cultivars are more difficult to strike from cuttings than Australian cultivars due to species and genetic composition. In this experiment, cuttings of 32 genotypes were evaluated for rooting ability. Each genotype's species profile was estimated using historical data, and used to determine species effects on survival (percentage) and rooting ability (rating 0-2). M. jansenii (100%), M. tetraphylla (84%) and M. integrifolia/tetraphylla hybrids (79%) had the highest success rates while M. integrifolia (54%) and M. ternifolia (43%) had the lowest survival. Rooting ability of M. jansenii (1.75) was significantly higher than M. ternifolia (0.49) but not significantly higher than M. tetraphylla × M. integrifolia with (1.09), M. tetraphylla (1.03) or M. integrifolia (0.88).

Adventitious rooting of conifers: influence of biological factors

Vegetative propagation of superior conifer trees can be achieved e.g. through rooted cuttings or rooted microshoots, the latter predominantly through in vitro tissue culture. Both techniques are used to achieve rapid multiplication of trees with favorable genetic combinations and to capture a large proportion of the genetic diversity in a single generation cycle. However, adventitious rooting of shoots (cuttings) is often not efficient due to various problems such as scarcity of roots and cessation of their growth, both of which limit the application of vegetative propagation in some conifer species. Many factors are involved in the adventitious rooting of shoots including physical and chemical ones such as plant growth regulators, carbohydrates, light quality, temperature and rooting substrates or media (reviewed by Ragonezi et al. 2010). The focus of this review is on biological factors, such as inoculations with Agrobacterium rhizogenes, plant- growth-promoting rhizobacteria and other endophytes, and mycorrhizal fungi, which were found to stimulate adventitious rooting. These microorganisms could contribute not only to adventitious root development but also help in protecting conifer plants against pathogenic microorganisms, facilitate acclimation and transplanting, and contribute to more sustainable, chemical-free forests.

Quantification of free auxins in semi-hardwood plant cuttings and microshoots by dispersive liquid–liquid microextraction/microwave derivatization and GC/MS analysis

Several studies have suggested that differences in the natural rooting ability of plant cuttings could be attributed to differences in endogenous auxin levels. Hence, during rooting experiments, it is important to be able to routinely monitor the evolution of endogenous levels of plant hormones. This work reports the development of a new method for the quantification of free auxins in auxin-treated Olea europaea (L.) explants, using dispersive liquid–liquid microextraction (DLLME) and microwave assisted derivatization (MAD) followed by gas chromatography/mass spectrometry (GC/MS) analysis. Linear ranges of 0.5–500 ng mL 1 and 1–500 mg mL 1 were used for the quantification of indole-3-acetic acid (IAA) and indole-3-butyric acid (IBA), respectively. Determined by serial dilutions, the limits of detection (LOD) and quantification (LOQ) were 0.05 ng mL 1 and 0.25 ng mL 1, respectively for both compounds. When using the calibration curve for determination, the LOQ corresponded to 0.5 ng mL 1 (IAA) and 0.5 mg mL 1 (IBA). The proposed method proved to be substantially faster than other alternatives, and allowed free auxin quantification in real samples of semi-hardwood cuttings and microshoots of two olive cultivars. The concentrations found in the analyzed samples are in the range of 0.131–0.342 mg g 1 (IAA) and 20–264 mg g 1 (IBA).

Fresh Cuttings: A Celebration of Fiction and Poetry from UQP's Black Writing Series

As the first anthology of UQP's indigenous-authored books, Fresh Cuttings represents the very best of fiction and poetry publishing from UQP's Black Australian Writing series. An introduction by the editors and a biography of each author is included.

Congruence in QTL for adventitious rooting in Pinus elliottii x Pinus caribaea hybrids resolves between and within-species effects

Targeting between-species effects for improvement in synthetic hybrid populations derived from outcrossing parental tree species may be one way to increase the efficacy and predictability of hybrid breeding. We present a comparative analysis of the quantitative trait loci (QTL) which resolved between from within-species effects for adventitious rooting in two populations of hybrids between Pinus elliottii and P. caribaea, an outbred F1 (n=287) and an inbred-like F2 family (n=357). Most small to moderate effect QTL (each explaining 2-5% of phenotypic variation, PV) were congruent (3 out of 4 QTL in each family) and therefore considered within-species effects as they segregated in both families. A single large effect QTL (40% PV) was detected uniquely in the F2 family and assumed to be due to a between-species effect, resulting from a genetic locus with contrasting alleles in each parental species. Oligogenic as opposed to polygenic architecture was supported in both families (60% and 20% PV explained by 4 QTL in the F 2 and F1 respectively). The importance of adventitious rooting for adaptation to survive water-logged environments was thought in part to explain oligogenic architecture of what is believed to be a complex trait controlled by many hundreds of genes.

Genetic control of propagation traits in a single Corymbia torelliana x Corymbia variegata family

Genetic control of vegetative propagation traits was described for a second-generation, outbred, intersectional hybrid family (N = 208) derived from two species, Corymbia torelliana (F. Muell.) K.D. Hill & L.A.S. Johnson and Corymbia variegata (F. Muell.) K.D. Hill & L.A.S. Johnson, which contrast for propagation characteristics and in their capacity to develop lignotubers. Large phenotypic variances were evident for rooting and most other propagation traits, with significant proportions attributable to differences between clones (broad-sense heritabilities 0.2-0.5). Bare root assessment of rooting rate and root quality parameters tended to have the highest heritabilities, whereas rooting percentage based on root emergence from pots and shoot production were intermediate. Root biomass and root initiation had the lowest heritabilities. Strong favourable genetic correlations were found between rooting percentage and root quality traits such as root biomass, volume, and length. Lignotuber development on a seedling was associated with low rooting and a tendency to poor root quality in cuttings and was in accord with the persistence of species parent types due to gametic phase disequilibrium. On average, nodal cuttings rooted more frequently and with higher quality root systems, but significant cutting type x genotype interaction indicated that for some clones, higher rooting rates were obtained from tips. Low germination, survival of seedlings, and rooting rates suggested strong hybrid breakdown in this family.

Domestication for Conservation of an Endangered Species: The Case of the Wollemi Pine

A small population of tall slender conifers was discovered in 1994 in a deep rainforest canyon of the Wollemi National Park, New SouthWales, Australia. The living trees closely resembled fossils that were more than 65 million years old, and this ‘living fossil’ was recognised as a third extant genus in the Araucariaceae (Araucaria, Agathis and now Wollemia). The species was named the Wollemi pine (W. nobilis). Extensive searches uncovered very few populations, with the total number of adult trees being less than 100. Ex situ collections were quickly established in Sydney as part of the Wollemi Pine Recovery Plan. The majority of the ex situ population was later transferred to our custom-built facility in Queensland for commercial multiplication. Domestication has relied very heavily on the species’ amenability to vegetative propagation because seed collection from the natural populations is dangerous, expensive, and undesirable for conservation reasons. Early propagation success was poor, with only about 25% of cuttings producing roots. However, small increases in propagation success have a very large impact on a domestication program because plant production can be modelled on an exponential curve where each rooted cutting develops into a mother plant that, in turn, provides more rooted cuttings. An extensive research program elevated rooting percentages to greater than 80% and also provided in vitro methods for plant multiplication. These successes have enabled international release of the Wollemi pine as a new and attractive species for ornamental horticulture.

Ageing delays the cellular stages of adventitious root formation in pine.

Vegetative propagation programs internationally are affected by the significant decline of rooting success as trees mature. This study compared the cellular stages of root formation in stem cuttings from 15-week-old (juvenile) and 9-y-old (mature) stock plants of the slash x Caribbean pine hybrid (Pinus elliottii var. elliottii x P. caribaea van hondurensis). The cellular stages of root formation were the same in both juvenile and mature cuttings, beginning with cell divisions of the vascular cambium forming callus tissue. Within the callus, tracheids differentiated and elongated to form root primordia. Roots in juvenile cuttings developed faster than those in mature cuttings and the juvenile cuttings had a much higher rooting percent at the end of the study (92% and 26% respectively). Cuttings of the two juvenile genotypes had more primary roots (5.5 and 3.3) than the three mature genotypes (0.96, 0.18 and 0.07). The roots of juvenile cuttings were more evenly distributed around the basal circumference when compared with those on cuttings from the mature genotypes. Further work is needed to improve understanding of physiological changes with maturation so that the rooting success and the speed of development in cuttings from mature stock plants can be optimised, hence improving genetic gain.

Stem anatomy and adventitious root formation in cuttings of Angophora, Corymbia and Eucalyptus

Many plantation eucalypts are difficult to propagate from cuttings, and their rooted cuttings often possess very few adventitious roots. We microscopically examined the stem anatomy of cuttings from 12 species of eucalypts and we determined whether adventitious root formation in auxin-treated cuttings of four species was limited to particular positions around the vascular tissue. Most species contained a central pith that was arranged in a four-pointed stellate pattern. The surrounding vascular tissue was also arranged in a stellate pattern near the shoot apex but it developed a more rectangular shape at the outer phloem as the stems enlarged radially. Adventitious roots formed at, or slightly peripheral to, the vascular cambium, and they formed at both the corners and the sides of the rectangular-shaped vascular tissue. The study highlighted that auxin-treated eucalypt cuttings can produce roots at multiple positions around the vascular tissue and so propagation methods can aim to produce more than four adventitious roots per rooted cutting. Higher numbers of adventitious roots could improve the root system symmetry, stability, survival and growth rate of clonal eucalypt trees. © 2015 by the authors; licensee MDPI, Basel, Switzerland.

Interrelations of soil micro-orgamisms and mulberry I.Phytohormone production by soil and rhizosphere bacteria and their effect on plant growth

Bacteria isolated from the rhizosphere of mulberry (Morus indica) as well as from control soil were tested for their effects on the growth of mulberry seedlings and for phytohormone production. About 12.8 per cent of the rhizosphere and 9.7 per cent of the soil isolates produced phytohormones in cultures. Rhizosphere isolates were more active in hormone synthesis than their soil counterparts. Soaking mulberry stem cuttings in culture filtrates of phytohormone synthesisers hastened their rooting. Culture filtrates of many isolates — hormone producers or not — stimulated or inhibited the growth of shoot and/or root of plants. Many cultures could also inhibit the germination of mulberry seeds.

Havupuiden erikoismuotojen lisäysmenetelmät

Havupuiden erikoismuotoja on käytetty koristekasveina jo vuosisatoja ympäri maailmaa. Niitä on lisätty pääsääntöisesti pistokkaista ja varttamalla. Suomessa kotimaisten metsäpuidemme erikois-muotoja on kartoitettu ja kerätty kokoelmiin järjestelmällisemmin 1960-luvulta alkaen. Taimisto-viljelijät, puutarhasuunnittelijat ja kotipuutarhurit ovat olleet enenevässä määrin kiinnostuneita näistä kotimaisista kestävistä havukasveista. Yli 90 prosenttia markkinoillamme olevista havukas-veista tuodaan ulkomailta, joten on selvää, että niiden talvenkestävyydessä on ongelmia. Tämän tutkimuksen tavoitteena oli selvittää kotimaisille erikoismuodoille sopivia lisäysmene-telmiä ja siten edistää kotimaisen havukasvituotannon mahdollisuuksia. Aineistona kokeissa oli kotimaisia erikoismuotoja metsäkuusesta (Picea abies (L.) Karsten) ja kotikatajasta (Juniperus communis L.), tavallisia metsäkuusia sekä kahdeksan ulkomaista havupuutaksonia. Lisäysmene-telmistä tutkittiin varttamista ja pistokaslisäystä ja kokeet suoritettiin Metsäntutkimuslaitoksen toimipaikoissa Lopen Haapastensyrjässä sekä Punkaharjulla. Varttamiskokeessa vertailtiin koti-maisen kuusen erikoismuotokloonien varttamisen onnistumista. Pistokaskokeissa tutkittiin geno-tyypin, emopuun iän, pistokasoksan sijainnin sekä hormonikäsittelyn vaikutusta havukasvien pis-tokkaiden juurtumiseen. Tavalliset metsäkuuset toimivat kontrolleina. Tutkimus osoitti, että varttaminen onnistui erinomaisesti kaikilla erikoismuotoklooneilla. Ovat-ko vartteet esteettisesti katsottuna koristekäyttöön sopivia, jää vielä seurattavaksi. Pistokaskokeis-sa havaittiin, että juveniilisuus vaikutti pistokkaiden juurtumiseen, mutta iäkkäistäkin puista lisää-minen onnistuu, kunhan genotyyppi on sopiva. Keskimäärin alaoksat juurtuivat paremmin kuin latvuksen yläosista otetut pistokasoksat, mutta vain yhdellä kloonilla ero oli tilastollisesti merkit-sevä. Hormonikäsittely heikensi selvästi kotimaisen kuusen ja katajan pistokkaiden juurtumista, mutta ulkomaisiin havupuulajeihin käsittelyllä ei ollut vaikutusta. Kotimaisen havukasvituotannon pohjaksi pitäisi tehdä kloonivalintaa, jossa koristearvon lisäksi otettaisiin huomioon myös kloonin lisättävyys. Taimien tuottaminen pistokkaista on selvästi edul-lisempaa kuin vartteiden tuottaminen, joskin varte kasvaa myyntikuntoon nopeammin kuin pisto-kastaimi. Pistokastaimi on kuitenkin omajuurinen ja stabiilimpi kasvutavaltaan kuin varte. Tämä korostuu etenkin kääpiömuotoja tuotettaessa.