IN VITRO INCIDENCE of ROOT CANAL BIFURCATION IN MANDIBULAR INCISORS BY RADIOVISIOGRAPHY

Objective: The aim of this study was to verify, in vivo and in vitro, the prevalence of root canal bifurcation in mandibular incisors by digital radiography. Material and Methods: Four hundred teeth were analyzed for the in vivo study. Digital radiographs were taken in an orthoradial direction from the mandibular incisor and canine regions. The digital radiographs of the canine region allowed visualizing the incisors in a distoradial direction using 20 degrees deviation. All individuals agreed to participate by signing an informed consent form. The in vitro study was conducted on 200 mandibular incisors positioned on a model, simulating the mandibular dental arch. Digital radiographs were taken from the mandibular incisors in both buccolingual and mesiodistal directions. Results: The digital radiography showed presence of bifurcation in 20% of teeth evaluated in vitro in the mesiodistal direction. In the buccolingual direction, 17.5% of teeth evaluated in vivo and 15% evaluated in vitro presented bifurcation or characteristics indicating bifurcation. Conclusions: Digital radiography associated with X-ray beam distally allowed detection of a larger number of cases of bifurcated root canals or characteristics of bifurcation.

Observation and properties of the X(3872) decaying to J/psi pi(+)pi(-) in p(p)over-bar collisions at root s=1.96 TeV

We report the observation of the X(3872) in the J/psipi(+)pi(-) channel, with J/psi decaying to mu(+)mu(-), in p (p) over bar collisions at roots=1.96 TeV. Using approximately 230 pb(-1) of data collected with the Run II D0 detector, we observe 522+/-100 X(3872) candidates. The mass difference between the X(3872) state and the J/psi is measured to be 774.9+/-3.1(stat)+/-3.0(syst) MeV/c(2). We have investigated the production and decay characteristics of the X(3872) and find them to be similar to those of the psi(2S) state.

Production of WZ events in pp(-) collisions at root s=1.96 TeV and limits on anomalous WWZ couplings

We present results from a search for WZ production with subsequent decay to l nu l'(l) over bar'(l and l' = e or mu) using 0.30 fb(-1) of data collected by the D0 experiment between 2002 and 2004 at the Fermilab Tevatron. Three events with WZ decay characteristics are observed. With an estimated background of 0.71 +/- 0.08 events, we measure the WZ production cross section to be 4.5(-2.6)(+3.8) pb, with a 95% C.L. upper limit of 13.3 pb. The 95% C.L. limits for anomalous WWZ couplings are found to be -2.0

Shape, transverse size, and charged-hadron multiplicity of jets in pp collisions at root s=7 TeV

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Planting time, developmental stages and characteristics of roots and starch of Pachyrhizus ahipa

De forma geral, as características do amido variam não somente com a planta de origem, mas também com o estádio de desenvolvimento desta. Neste trabalho objetivou-se avaliar a influência da época de plantio e estádio de desenvolvimento da planta de ahipa sobre as características físico-químicas das raízes, tamanho de grânulos do amido e suas propriedades viscográficas. Constatou-se influência do estádio de desenvolvimento da planta nas características físico-químicas das raízes e do amido, independentemente da época de plantio. A melhor época para o plantio de Pachyrhizus ahipa é outubro e a colheita deve ser feita no máximo com 9 meses, adotando-se o procedimento de retirada das flores a partir dos 3 meses.

THE CASSAVA (MANIHOT-ESCULENTA, C) CV PIONEIRA .3. COOKING CHARACTERISTICS

The edible parts of cassava cultivar Pioneira roots after 12 and 24 months of cultivation were analysed for human consum. The yield was 63% when the roots were harvested at the right time (12 months), and lower (58%) for older roots, with 24 months. Total cyanide contents were 62,0 - 61,8 and 58,0 - 63,4 ppm, respectively. Cooking time was 13,5 min and 19,5 min, respectively, although the cooked mass quality was similar good. The edible part of the roots was processed in french fries or tholes, submited to two treatment: blanching for three minutes and boiling for ten minutes. Treated and in natura tholes were fried in vegetable oil at 190-degrees-C. The effect of freezing (-20-degrees-C for 60 days) on the cooking quality was also evaluated. The frozen storage reduced the total cyanid content in all treatment. The rate of cyanid decrease were 45%, 84% and 88% with frying, blanching and frying, and boiling and frying, respectively. Blanching followed by frying assured a safe cyanid level for human consum as well as a good acceptance in sensorial analysis. The influence of the age of the roots in cooking quality was a decrease in softness. Frozen storage softened the 24 month old roots and worsened the flavor of 12 month old root. For table purposes cassava roots should be processed in french fries and blanching, what would allow frozen storage of edible part.

Theory of electrical characteristics for metal-oxide-insulator Schottky barrier and metal-insulator-metal structures

The metal-insulator or metal-amorphous semiconductor blocking contact is still not well understood. Here, the intimate metal-insulator and metal-oxide-insulator contact are discussed. Further, the steady-state characteristics of metal-oxide-insulator-metal structures are also discussed. Oxide is an insulator with wider energy band gap (about 50 Å thick). A uniform energetic distribution of impurities is considered in addition to impurities at a single energy level inside the surface charge region at the oxide-insulator interface. Analytical expressions are presented for electrical potential, field, thickness of the depletion region, capacitance, and charge accumulated in the surface charge region. The electrical characteristics are compared with reference to relative densities of two types of impurities. ln I is proportional to the square root of applied potential if energetically distributed impurities are relatively important. However, distribution of the electrical potential is quite complicated. In general energetically distributed impurities can considerably change the electrical characteristics of these structures.

Scanning electron microscopic analysis of the effect of Carisolv TM gel on periodontally compromised human root surfaces

The aim of this study was to analyze, under scanning electron microscopy (SEM), the morphologic characteristics of root surfaces after application of CarisolvTM gel in association with scaling and root planing (SRP). Sixty periodontally compromised extracted human teeth were randomly assigned to 6 groups: 1) SRP alone; 2) passive topical application of CarisolvTM + SRP; 3) active topical application of CarisolvTM + SRP; 4) multiple applications of CarisolvTM + SRP; 5) SRP + 24% EDTA; 6) topical application of CarisolvTM + SRP + 24% EDTA. CarisolvTM gel was applied to root surfaces for 30 s, followed by scaling and root planing, consisting of 50 strokes with Gracey curettes in an apical-coronal direction, parallel to the long axis of the tooth. The only exception was group 4, in which the roots were instrumented until a smooth, hard and glass-like surface was achieved. All specimens were further analyzed by SEM. The results showed that the treatment with CarisolvTM caused significant changes in root surface morphology of periodontally compromised teeth only when the chemical agent was actively applied (burnishing technique). CarisolvTM failed to remove the smear layer completely, especially with a single application, independently of the method of application. Multiple applications of CarisolvTM were necessary to achieve a smear layer reduction comparable to that obtained with 24% EDTA conditioning.

Spatial characteristics of borromean, tango, samba and all-bound halo nuclei

We report a renormalized zero-range interaction approach to estimate the size of generic weakly bound three-body systems where two particles are identical. We present results for the neutron-neutron root-mean-square distances of the halo nuclei 6He, 11Li, 14Be and 20C, where the systems are taken as two halo neutrons with an inert point-like core. We also report an approach to obtain the neutron-neutron correlation function in halo nuclei. In this case, our results suggest a review of the corresponding experimental data analysis. © 2007 American Institute of Physics.

Information for the diagnosis and treatment of root resorption due to tooth replantation.

A favorable prognosis after tooth avulsion depends on some variables, such as the extra-alveolar period and storage medium. Vitality of the periodontal ligament cells is considered a critical factor for a successful outcome without root resorption. The dental surgeon is provided with clinical information and radiographic findings to establish a diagnosis and may rely on current available guidelines. Once trauma has occurred, treatment must be quick and effective, and periodic follow-up must be performed. Clinical, radiographic, and histologic characteristics for each type of root resorption due to tooth replantation are presented, with the aim to provide information for the diagnosis and treatment of healing complications.

Etidronate from Medicine to Endodontics: effects of different irrigation regimes on root dentin roughness.

An increase in dentin roughness, associated with surface composition, contributes to bacterial adherence in recontaminations. Surface roughness is also important for micromechanical interlocking of dental materials to dentin, and understanding the characteristics of the surface is essential to obtain the adhesion of root canal sealers that have different physico-chemical characteristics.

Jet and underlying event properties as a function of charged-particle multiplicity in proton-proton collisions at root s=7 TeV

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Interface of dentine to root canal sealers

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

The Influence of Municipal Treated Wastewater on Morpho-Physiological Characteristics of Eucalyptus Plants

The effects of municipal-treated wastewater on growth and gas exchange characteristics were studied in eucalyptus plants cultivated in a greenhouse under continuous sub irrigation with 70 % Long Ashton solution as a control, 100 % treated wastewater, and treated wastewater diluted 50 % with tap water. Irrigation with wastewater resulted in a reduction of total dry matter per plant and the shoot-to-root ratio and increased specific leaf mass, irrespective of the dilution. The gas exchange characteristics were adversely affected by the irrigation with wastewater, with photosynthetic rates been negatively affected. Total chlorophyll and carotenoids content were reduced in plants grown under treated wastewater. The results demonstrated that when the eucalyptus plants were grown under treated wastewater as the only source of mineral nutrients they were able to produce nearly 50 % of the dry matter produced by the plants grown under appropriate mineral nutrient supply, irrespective of the dilution. Therefore, the contribution of mineral nutrients and organic matter from the treated wastewater used as agricultural irrigation will be significant in lower the fertilizer rates without reducing dry matter production per plant.

The effect of the angle of instrumentation of the piezoelectric ultrasonic scaler on root surfaces

To evaluate the influence of variations in the working angle of the piezoelectric ultrasonic scaler (PUS) on root surfaces. Material and methods Fifty-five uniradicular bovine teeth were used, of which 25 teeth were used for the analysis of the roughness and root wear, while the remaining 30 teeth were used for the analysis of morphology (MRS) and the attachment of blood components (ABC). The teeth were randomly divided into five groups according to the type of treatment (G1-G5: piezoelectric ultrasonic scaler; G6: manual curette) and to the PUS working angle applied (G1: 0°; G2: 30°; G3: 45°; G4: 60°; G5: 90°). For statistical analysis, the data describing the MRS and ABC were analysed by the Kruskal–Wallis and Dunn's tests, and the data describing the roughness and tooth wear were analysed by anova and Tukey's tests at the significance level of 5%. Results Manual curette (MC) promoted a smoother root surface than the application of the PUS. The PUS used at the angles of 30° and 45° resulted in a high level of ABC that was comparable to that obtained by MC. Additionally, the group in which the PUS was applied at an angle of 45° exhibited less tooth wear than the other groups. Conclusions Changes in the working angle of the PUS influenced the characteristics of root surfaces after instrumentation.