Influência do resíduo de colheita de cana-de-açúcar sem queima sobre a eficiência dos herbicidas imazapic e imazapic + pendimethalin

Os resíduos deixados sobre o solo por ocasião da colheita mecanizada da cana-de-açúcar podem constituir-se em uma barreira física para a ação dos herbicidas no controle de plantas daninhas, quando aplicados em pré-emergência destas plantas sobre a palha da cana. em virtude disso, o presente trabalho teve por objetivos analisar e quantificar a interferência dessa camada de palha sobre o solo na ação dos herbicidas imazapic e imazapic + pendimethalin no controle de plantas daninhas em áreas onde a cana-de-açúcar foi colhida mecanicamente sem a queima da palhada previamente à colheita. Foram realizados dois ensaios simultâneos: um com a retirada da palha dois dias após a aplicação dos herbicidas e o outro com a manutenção desta, ambos conduzidos em casa de vegetação. O imazapic isolado foi aplicado nas dosagens de 0, 122,5 e 147 g i.a.ha-1 e em mistura com pendimethalin na dosagem de 75 + 1500 g i.a.ha-1, com simulação de chuvas nas intensidades de 30, 60 e 90 mm. Após análise dos resultados de biomassa seca, altura e número de folhas das plantas de Sorghum bicolor e Cyperus rotundus, além de nota visual e biomassa seca de Panicum maximum, Brachiaria plantaginea, Digitaria horizontalis, Amaranthus viridis, Ipomoea grandifolia e Brachiaria decumbens, constatou-se eficiência proporcional dos herbicidas à dosagem utilizada, independentemente da presença da palha, à exceção de Ipomoea grandifolia e Brachiaria decumbens, além de haver menor controle nos tratamentos submetidos à chuva de 90 mm. Esses resultados indicam boas perspectivas quanto à aplicação destes herbicidas em áreas de colheita mecanizada de cana-de-açúcar sem queima, para controle de plantas daninhas em condições de pré-emergência.

Quantificação de macronutrientes no solo e em folhas de cana-de-açúcar em função de doses de resíduo da mineração de bauxita

The experiment was carried out in green house with the objective of evaluating the effect of the bauxite mining residue in the rates of macronutrients in sugarcane and soil. Containers of 10 L were used. They received the following rates of bauxite residue: 0; 28; 56; 84; 112 and 140 t ha(-1). The used culture was the sugarcane (SP92 4221). The incorporation of the bauxite residue in the soil provided an increase in the levels of the soil macronutrients, and only for sulphur levels above 83 t ha(-1), it was possible to provide reductions of this nutrient. For rates of determined macronutrients in the leaf, levels above 70, 5; 125; 101; 56 t ha (-1) diminished the rates of nitrogen, phosphorum, potassium and sulphur, respectively. However, for calcium and magnesium the use of the residue provided the reduction of leaf rates. The level of the bauxite residue which had the largest production of dry mass was 64 t ha(-1).

Avaliação de resíduo do herbicida imazethapyr e da interferência de plantas daninhas na cultura da alfafa

Foram conduzidos dois experimentos de campo em área experimental do Departamento de Nutrição Animal e Pastagens da Faculdade de Ciências Agrárias e Veterinárias (UNESP), Campus de Jaboticabal, com o objetivo de observar resíduos do herbicida imazethapyr na forragem da alfafa e analisar a interferência de plantas daninhas monocotiledôneas e dicotiledôneas. No primeiro experimento, o herbicida foi aplicado nas doses de 0,5 e 1,0 l do p.c./ha, nos estádios de desenvolvimento: início de brotação das gemas basais, estádio vegetativo, ou seja, antes da cobertura total do solo e início do florescimento da alfafa. Foi observado que o herbicida não deixou resíduo nas plantas da alfafa, podendo estas serem consumidas pelos animais, logo após seu tratamento. No segundo experimento, foi estabelecido com base no manejo de cortes da área experimental e na presença de plantas daninhas, quatro tratamentos: 1)corte no verão de 1996, sem a presença de invasoras, 2)corte no inverno de 1996, sem a presença de invasoras, 3)corte no verão de 1997, com predominância de espécies monocotiledôneas, 4)corte no verão de 1997, com predominância de espécies dicotiledôneas. A presença de plantas daninhas reduziu a produção de matéria seca da alfafa. Quanto aos valores de parede celular, observou menores de Hem (5,7) e Lig (5,1) e maior de PB (26,1%) nas plantas colhidas no inverno, devido à maior proporção de folhas.

Estudo do comportamento no estado fresco e endurecido do concreto com incorporação de resíduo de corte de botão

This works aims at investigating the effects of adding waste from RCBP-polyester button manufacturing to Portland cement concrete, particularly regarding its consistency and mechanic strength. The RCBP used came from a button factory located in Parnamirim, RN, Brazil. The waste was added to the concrete on different ratios: 5 %, 10 %, 15 % and 20 % of the total cement mass. A sample of concrete without the RCBP was used as reference, 1:1,33:2,45:0,50. For the mechanic strength test four samples were tested with different ages (3, 7 and 28 days old) and mixtures. Furthermore, a Slump Test was also conducted in order to verify the concrete s consistency. A tendency to a reduction in the compression resistance was noticed for all samples. For the samples with 5 % and 10 %, there was also an increase in the traction resistance during inflexion, regarding the reference concrete. In the microstructural analysis, the RBCP was observed to show an irregular and porous surface, thus explaining the consistency decrease

Avaliação do concreto de cimento portland com resíduo da produção de scheelita em substituição ao agregado miúdo

From the 70`s, with the publication of the Manifesto for Environment UN Conference, held in Stockholm, in Sweden (1972), defend and improve the environment became part of our daily lives. Thus, several studies have emerged in several segments in order to reuse the waste. Some examples of waste incorporated in portland cement concrete are: rice husk ash, bagasse ash of cane sugar, powder-stone, microsilica, tire rubber, among others. This research used the residue of the mining industry Scheelite, to evaluate the incorporation of the residue composition of Portland cement concrete, replacing the natural sand. The percentage of residue were incorporated from 0% to 100%, with a variation of 10%, 11 being produced concrete mix in the ratio 1:2:3:0.60, by mass. We evaluated the following characteristics of concrete: slump test, compressive strength, tensile strength by diametral compression, water absorption, porosity and density, based on the ABNT, through tests performed in the Laboratory of Civil Construction, UFRN. The trace with the addition of 60% scheelite residue was obtained which better performance. Therefore, the use of the waste from the production of Scheelite is feasible due to the durability parameters (water absorption and porosity), sustainability, and the good results of the resistance of the concrete

Uso fertilizante de resíduo da indústria processadora de goiabas

O resíduo da indústria processadora de goiabas vem sendo aplicado em algumas áreas, entretanto não é conhecido o seu efeito na fertilidade do solo. Foi realizado experimento em casa de vegetação, com o objetivo de avaliar o efeito da aplicação do resíduo da indústria processadora de goiabas na fertilidade do solo, tendo como planta-teste o milho. O delineamento experimental utilizado foi em blocos ao acaso, em esquema fatorial 5x2, com quatro repetições, combinando-se cinco doses do resíduo da indústria processadora de goiabas (0; 20; 40; 60 e 80 t ha-1) na presença e ausência de adubação mineral. A adição de resíduo da indústria processadora de goiabas propiciou aumento nos teores de P e K do solo. O resíduo da indústria processadora de goiabas é uma fonte de liberação lenta de N e P para as plantas.

Mineralização do nitrogênio proveniente da aplicação do resíduo da indústria processadora de goiabas em Argissolo

Informações sobre a mineralização de subprodutos são importantes para o correto manejo desses materiais em áreas agrícolas. Assim, objetivou-se avaliar a mineralização do nitrogênio proveniente do resíduo da indústria processadora de goiabas, aplicado em Argissolo cultivado com goiabeiras. Amostras do solo mais o subproduto foram acondicionados em frascos de polietileno com capacidade de 0,25 dm³. Foram pesados 100 g de solo mais o resíduo referente a cada tratamento (doses do subproduto: 0; 9; 18 e 36 t ha-1), sendo tal procedimento realizado em triplicata. O período máximo de incubação foi de 11 semanas, analisando-se as amostras nos seguintes tempos: 0; 7; 14; 28; 42; 56; 70; 84; 98; 112 e 126 dias. A umidade foi corrigida para 70% da capacidade de retenção de água do solo, sendo monitorada diariamente através de pesagens dos potes. Nos tempos estabelecidos realizou-se a desmontagem de três frascos correspondentes a cada tratamento, determinando-se o nitrogênio inorgânico. Pode-se afirmar que a mineralização do N ou a liberação é lenta, ou seja, não há rápida disponibilização de nitrogênio. No período avaliado, 126 dias, a fração média de mineralização foi de 23% e, a meia vida média de 73 dias.

Desempenho de argamassas produzidas com agregados reciclados oriundos do resíduo de construção e demolição da Grande Natal-RN

The construction industry is responsible for generating a lot of waste because of their activities. Consequently, it is noticeable the occurrence of environmental problems in terms of its disposal in inappropriate places. Faced with this problem, some studies have been conducted with the aim of developing technologies and alternatives for recycling construction and demolition waste (CDW), motivated by the scarcity of natural resources and reduction of environmental problems generated. The research aims to characterize the recycled aggregates derived from construction and demolition waste (CDW) produced in the Greater Natal-RN and analyze the performance of mortar coating produced with recycled aggregates. The study includes the chemical , physical and microstructural characterization of recycled aggregates , as well as conducting microscopic analysis and laboratory tests in the fresh state (consistency index , water retention , bulk density and content of entrained air ) and in the hardened state ( compressive strength , tensile strength in bending , water absorption by immersion and capillary , mass density and void ratio ) for mortars produced from different levels of substitution of aggregates ( 0, 20 %, 40 %, 60 %, 80 % and 100 %). The results were satisfactory, providing mortars produced with recycled aggregates, smaller mass density and dynamic modulus values as well as an increase in the rates of absorption and porosity. The tensile strength in bending and compression for TP1 (1:2:8) trait were lower for mortars produced with recycled aggregates and the best result was 20% for replacement. For the TP2 (1:8) mapping, there was an increase in resistance to traction and compression and the best result was for 100% replacement of natural aggregates by recycled. The experiments led to the conclusion that the technical and economic point of view that the mortars produced with recycled aggregates can be used in construction, only if there is an effective control in production processes of recycled aggregate and at the dosage of mortars

Massa de forragem, composição morfológica e química de capim-tanzânia sob diferentes dias de descanso e altura de resíduo pós-pastejo

The experiment was conducted at UNESP/FCAV, Jaboticabal, SP, with the objective of evaluating the influence of the rest period and height of the residue post-grazing on the dry matter mass, morphologic composition and on the chemical composition of the Tanzania-grass pre-grazing condition, under rotational grazing. The treatments consisted of the combination of two rest periods (25 and 35 days) and two residue height post-grazing (30 and 50 cm), as a complete randomized design in factorial arrangement 2 x 2, with three replications, with the grazing cycles considered as sub plots. The herbage mass of stem, leaves, dead material and the leaf: stem ratio were significantly influenced (P<0.05) by the grazing cycles. The percentage of CP in the leaf and stem and the NDF in the stem, leaf and whole plant were influenced positively (P<0.05) by the grazing cycles. It was observed that the short rest periods associated with the smallest residue height post-grazing presented the best results in terms of herbage mass and chemical characteristics of the herbage.

Digestibilidade in vitro/gás de volumosos exclusivos ou combinados avaliados pelo resíduo remanescente da digestão da matéria seca e produção de gás

Foi avaliada a digestibilidade in vitro/gás da matéria seca (MS) de quatro volumosos, exclusivos e suas combinações, na proporção de 50% na MS. Foram incubados 100 mg de amostra por tratamento, em triplicatas, em 48 h de digestão. As digestibilidades da MS e a produção de gás foram: cana-de-açúcar = 60,6%, 17,3 mL; cana-de-açúcar + silagem de milho = 63,9%, 19,6 mL; cana-de-açúcar + capim-elefante com 60 dias = 60,5%, 16,9 mL; cana-de-açúcar + capim-elefante com 180 dias = 48,6%, 14,1 mL; silagem de milho = 66,3%; silagem de milho + capim-elefante com 60 dias = 62,1%, 16,7 mL; silagem de milho + capim-elefante com 180 dias = 52,7%, 15,8 mL; capim-elefante com 60 dias = 61,5%, 16,9 mL; capim-elefante com 180 dias = 34,6%, 11,7 mL. Constatou-se que a combinação de volumosos, em alguns casos, pode diminuir a digestibilidade da MS dos volumosos de melhor qualidade.

Valor nutritivo do resíduo do processamento do caroço de algodão suplementado com levedura e avaliado em bovinos

O objetivo neste trabalho foi avaliar o consumo, a digestibilidade total e parcial da matéria seca (MS) e dos nutrientes e os parâmetros ruminais de novilhos alimentados com rações à base de resíduo do processamento do caroço de algodão (RPCA) suplementado com levedura seca de cana-de-açúcar. Foram utilizados seis novilhos Nelore canulados no rúmen e duodeno, alimentados com rações compostas de 80% RPCA e 20% concentrado, composto de milho, ureia e levedura nos níveis de 0, 20 ou 40%. O delineamento experimental adotado para análise do consumo e da digestibilidade foi em blocos casualisados e a análise dos parâmetros ruminais foi em parcela subdividida. Os consumos e a digestibilidade de nutrientes não foram influenciados pela suplementação com levedura, fato que pode estar relacionado ao alto valor da fração C do resíduo do processamento do RPCA (44,51% MS) e à baixa fração proteica de lenta degradação da levedura, que impediu a sincronização energia/nitrogênio para maior degradação do resíduo. O pH do líquido ruminal decresceu linearmente nos animais mantidos com as dietas suplementadas com levedura. em todas as dietas, o pH e a concentração de N-NH3 foram adequados para o crescimento microbiano. As concentrações ruminais de acetato, propionato, butirato e ácidos graxos voláteis totais e a relação acetato:propionato não foram influenciadas pela suplementação com levedura. O resíduo do processamento do caroço de algodão é uma opção a ser utilizada no arraçoamento de bovinos.

Aproveitamento de resíduo de caulim em cerâmica branca

The world market of Kaolin has been growing as new investments for better quality of materials have been applied. This market produces amounts of dross that are put in the environment in a wrong way, causing damages to it. Trying to reduce these damages, researches have been done in an attempt to use kaolin dross in ceramic. The disposal of kaolin dross in the environment by the industries of the states of Rio Grande do Norte and Paraiba have great impact in society. Usually this dross is disposed clandestinely in places like roads, river banks and lands of small cities. The present work shows the characteristics of the kaolin produced by the mining company in Junco do Seridó, Paraiba state, western Seridó, 300 km from Natal, in the border of both states. After that, researches were done to study its physical and the chemistry characteristics, trying to see if it can be used in white ceramic. The samples got were bolted in fabric of 325# . The technological characteristics tried to use it as a product in white ceramic. For that, it was made a haracterization of the subject matter through enlargement analyses, ATG and ATD, elaborating three formulations that were burned in four different temperatures, 1175, 1200, 1250 and 1300 degrees centigrade up to 30 minutes. After the burning, the subjects were submitted to water absorbing tests, linear retreating, apparent porosity, apparent specific mass, resistance to flexibility and MEV. For one of the mixtures it was obtained demanded properties for a semi porous material

Estudo do efeito da substituição de caulim por resíduo de caulim na fabricação de cerâmica de revestimento

Companies involved in kaolin mining and treatment represent an important area of industrial development in Brazil, significantly contribution to the worldwide production of such mineral. As a result, large volumes of kaolin residue are constantly generated and abandoned in the environment, negatively contributing to its preservation. In this scenario, the objective of the present study was to characterize the residue generated from kaolin mining as well as to assess its potential use as raw material for the production of ceramic tiles. Ceramic mixtures were prepared from raw materials characterized by X-ray fluorescence, X-ray diffraction, particle size analysis and thermal analysis. Three compositions were prepared using kaolin residue contents of 10%, 20% and 30%. Samples were uniaxially pressed, fired at 1200ºC and characterized aiming at establishing their mineralogical composition, water absorption, apparent porosity, specific mass, linear retraction and modulus of rupture. The results showed that the residue basically consisted of kaolinite and successfully replaced raw kaolin in the preparation of ceramic title formulations without significantly affecting the properties of the fired material

Efeito da introdução de resíduo de cinza de forno cerâmico em massa para cerâmica estrutural

The red ceramics and structural ceramics, as they are known, include ceramic materials made by blocks of seals and structures, bricks, tiles, smail flagstones manacles, rustic floors and ornamental materials. Their fabrication uses raw material such as clay and clay sites, with some content of impurity. It has good durability and mechanical strength to compression, low cost, making it one of the mainly used materials in civil engineering. The incorporation of many industrial activities residue to ceramic products is a technological alternative for reducing the environmental impact caused by its carefree disposal. This incorporation can promote chemical change and inertness of metals from residue, by fixation in the glassy phase of ceramic during the burning stage. The main aim of this project is to study the technical feasibility of the addition of ceramic oven ash into formulations of mass for structural ceramics. In this project two kinds of clay (plastic and non-plastic) were used, as well as the ash from firewood used in the process of burning of structural ceramics. A group of experiments was outlined, which permitted the evaluation of the influence of the burning cycle in different temperatures of the ash content in formulations for ceramic blocks through technological properties, mechanical behavior and microstructure. Five samples were processed of each one of the masses of plastic and non-plastic clay without addition of ash and with addition of ash on the percentages of 10 % and 20 %, for temperatures of 850 °C, 950 °C, 1050 °C and 1150 °C, obtained through sinterization process. Among the studied compositions, the one which presented best performance was the mass of clay with 10 % of ash, at temperature of 1150 °C, with the smallest absorption of water, the smallest apparent porosity, specific apparent mass a bit over the others and greatest mechanical resistance to flexion. The composition made confirmed the technical feasibility of the use of ash in the mass for structural ceramics with maintenance of its necessary characteristics for its purposes

Estudo do aproveitamento de resíduo de gesso como carga para compósito com matriz de resina expansiva de mamona

In the execution of civil engineering works, either by wasting during the coating of wall or demolition of gypsum walls, the generation of the gypsum waste involves serious environmental concerns. These concerns are increased by the high demand of this raw material in the sector and by the difficulties of proper disposal byproduct generated. In the search for alternatives to minimize this problem, many research works are being conducted, giving emphasis in using gypsum waste as fillers in composites materials in order to improve the acoustic, thermal and mechanical performances. Through empirical testing, it was observed that the crystallization water contained in the residue (CaSO4.2H2O) could act like primary agent in the expanding of the polyurethane foam. Considering that polyurethane produced from vegetable oils are biodegradable synthetic polymers and that are admittedly to represent an alternative to petrochemical synthetic polyurethane, this research consist an analysis of the thermal behavior of a composite whose matrix obtained from a resin derived from the expansive castor oil seed, with loads of 4%, 8%, 12% and 16% of gypsum waste replacing to the polyol prepolymer blend. Contributors to this analysis: a characterization of the raw material through analysis of spectroscopy by Fourier transform infrared (FTIR), chemical analysis by X-Ray Fluorescence (XRF) and mineralogical analysis by X Ray Diffraction (XRD), complemented by thermo gravimetric analysis (TGA). In order to evaluate the thermo physical properties and thermal behavior of the composites manufactured in die closed with expansion contained, were also carried tests to determine the percentage of open pore volume using a gas pycnometer, scanning electronic microscopy (SEM), in addition to testing of flammability and the resistance to contact with hot surfaces. Through the analysis of the results, it appears that it is possible to produce a new material, which few changes in their thermo physical properties and thermal performance, promotes significant changes and attractive to the environment