Radiografia digital para inspeção de soldas de dutos - melhor sensibilidade

The conventional radiographic technique using industrial radiographic films is with the days finishing. The Digital Radiography is taking place in several sectors, e.g., the medical, aerospace, security, automotive, etc. In addition to representing a technological trend, it has been demonstrated that digital radiography offers a series of benefits in terms of productivity, sensitivity, environmental aspects, image treatment tools, cost reduction, etc. If one weld seam to be inspected is from a serried product, as example a pipe, the best option to be implemented is the Flat Panel Detector with this equipment is possible to reduce the obtaining digital radiographic images in place of films and reducing the inspection cycle time due to its high degree of automation. In the experiments described in this paper this new technique was tested and the results were compared with those obtained by the conventional radiography. The welded specimens were prepared using the submerged-arc welding process and small artificial cracks of the most varied dimensions, present in the specimens, were used to establish a comparison of the sensitivities presented by the techniques employed After conducting several experiments, the digital method presented the highest sensitivity to the wire-type Image Quality Indicator (IQI) and in the detection of small defects, leading to the conclusion that the use of digital radiography using the flat-panel detector offers advantages over the conventional technique [1, 2]. This work was carried out based on the API 5L Edition 2004 [3] and ISO 3183 Edition 2007 [4] specifications.

Análise química de produtos de incrustação em dutos de petróleo por espectometria de fluorescência de raios X

The quantitative chemical characterization of the inorganic fraction of scale products is very relevant in studying, monitoring and controlling corrosive processes of oil pipelines. The X-ray fluorescence spectrometry (XRF) is a very versatile analytical technique, which can be used in quantitative analysis in solid samples at low concentrations of the chemical element, in the order of few ppm. A methodology that involves sample preparation diluted in the proportion of 1:7 (one portion of the sample for seven of wax), pressed as pellets was used in the XRF calibration for chemical analysis of scale products from oil pipelines. The calibration involved the preparation of reference samples from mixtures of P.A. reagents, aiming to optimize the time consumed in the steps of sample preparation and analysis of Al, Ba, Ca, Fe, K, Mg, Mn, Na, P, S, Si, Sr and Ti, using the same pressed pellet for trace and major elements analysis

Uso da palha de carnaúba em revestimento de dutos

In this work, the plant species Copernicia prunifera (Miller) H. E. Moore (carnauba), naturally occurring which prevails in the northeast region of Brazil was the subject of studies aiming its use as external coating of pipelines used in petroleum industry. The part of the plant worked were the leaves, also called straw, which were coated with resinous material. For this purpose, it was necessary to evaluate the effectiveness of the use of acrylic resins in the straw carnauba coating. The properties of the untreated carnauba straw and chemically treated with sodium hydroxide, hexane and carbon tetrachloride were investigated by ATRFTIR, SEM and thermal analysis. The first two techniques showed that treatment with solvents has caused major changes in the straw surface, while the thermal analysis indicated that the sodium hydroxide caused variations in thermal stability of straw constituents. Water absorption measurements showed that treatments have accelerated the absorption process and the reduction of contact angle values for treated samples with solvents indicated higher hidrophilicity of straw. The tensile tests showed lower values of elastic modulus and tensile strength for treated samples. Furthermore, coatings using pure commercial resins A and B as well as the formulations with clay were applied in straw and they were examined once again through thermal analysis, water absorption measurements, contact angle and mechanical tests. To analyze the effect of heat ageing, samples were subjected to tensile tests again in order to assess its resistance. The results showed that the resins/clay formulations increased thermal stability of straw, they promoted a good impermeabilization and caused significant decrease in the values of elastic modulus and tensile strength. Evaluating the ageing effect on the mechanical properties, it has been showed good recovery to the coated straw with the formulations A 60 and A 80% in modulus and tensile strength values and elongation at break values have remained very close. It is thus concluded that the carnauba straw can be used as a coating of pipelines with significant cost savings, since there is no need for pretreatment for its use and shows itself as a viable biotechnology alternative, contributing to the quality of coatings material and environment preservation.

Comparação entre pericárdio bovino preservado em glicerina e malha de poliéster no reparo de falhas da parede abdominal em ratos

OBJETIVO: Comparar uma malha comercial de poliéster com o pericárdio bovino preservado em glicerina na reconstituição de defeitos da parede abdominal. MÉTODOS: Foram utilizados 30 ratos, divididos em dois grupos eqüitativos. Efetuou-se uma excisão retangular de 2,5 x 2 cm, incluindo toda a musculatura abdominal e peritônio. No grupo I a parede abdominal foi reparada com malha de poliéster e no grupo II com pericárdio bovino conservado em glicerina. Os animais foram sacrificados aos 15, 60 e 90 dias de pós-operatório, sendo o local cirúrgico avaliado macroscópica e histologicamente. RESULTADOS: Os animais do grupo I apresentaram aderências mais severas e em maior número quando comparados aos do grupo II; porém, sem comprometimento funcional. A análise histológica revelou incorporação dos tecidos aos implantes, com maior resposta fibroblástica nos animais do grupo I. CONCLUSÃO: A malha de poliéster oferece maior resistência estrutural e resposta fibroblástica mais intensa; contudo, promove grande quantidade de aderências às vísceras abdominais, quando comparada ao pericárdio bovino.

Dois testes de imageamento com GPR em problemas de controle ambiental em regiões tropicais: migração de dunas e localização de dutos de óleo enterrados

Because the penetration depth of Ground Penetrating Radar (GPR) signals is very limited in high conductive soils, the usefullness of this method in tropical regions is not yet completly known. The main objective of this researh is to test the usefullness of the method in Brazil. Two typical problems where GPR has been used in Europe and North American were choosed for this test: the first one is to characterize the internal structures of a sand body and the second problem is the localization of old buried pipes lines. The first test was done near the city of São Bento do Norte, in the northern coast of Rio Grande do Norte state, NE Brazil. In this region, there is a sand dune that is migrating very fast in the direction of adjacent settling areas. To characterize the internal structure of the dune and its relationship to the prevailing wind direction, as a preliminary step to understand the dune migration, GPR profiles using the 400 MHz frequency were performed in E-W, N-S, NE-SW, and SE-NW directions over the sand dune intersecting at the top of the dune. The practical resolution of the GPR data is around 30 cm; this was sufficient to distinguish individual foresets inside the dune. After applying the elevation correction to the data, we identified that dips of bedding structures are smallest for the N-S profile, which is perpendicular to the dominant wind direction, largest for the E-W profile, and intermediate for the SW-NE and SE-NW profiles. Foresets in the E-W profile dip with angles varying from 2 to 6 degrees. In the E-W profile, the water table and a horizontal truncation interface separating two generations of dunes were identified, as well as an abrupt directional change in the foreset patterns associated to a lateral contact between two dune generations, the older one extending to the west. The used high frequency of 400 Mhz does not allow a penetration deep enough to map completely these internal contacts. The second test was done near Estreito, a small town near Carnaúbais city, also in Rio Grande do Norte state. In this locality, there are several old pipe lines buried in area covered by plantations where digging should be minimized. Several GPR profiles using the 400 and 200 MHz frequency were performed trying to intercept perpendicularly the possible pipe lines. Because of the high conductivity of the soil, the raw original data can hardly be use to identify the pipe lines. However, after an adequate processing over the 200 MHz profiles, six pipe lines were identified. As a global result of the tests, GPR can be very usefull if the conductivity of the ground is low or, in the case of medium conductivities of the soils, if adequate processing is performed

O uso de implantes orbitários de polietileno granulado de ultra-alto peso molecular no reparo de cavidades anoftálmicas

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Análise da influência do ultrassom de baixa intensidade na região de reparo ósseo em ratos sob ausência de carga

Há evidências de que o ultrassom (US) de baixa intensidade pode acelerar a regeneração óssea. Este trabalho objetivou verificar a ação do US no defeito ósseo, criado experimentalmente em tíbias de ratos sob ausência de carga. Vinte Rattus novergicus albinus, Wistar adultos, divididos em: G1 (n=10), grupo experimental de 15 dias sem suspensão, e G2 (n=10), grupo experimental de 15 dias suspenso pela cauda, foram submetidos à osteotomia em ambas as tíbias e à aplicação do US, frequência de 1,5 MHz, ciclo de trabalho 1:4, 30 mW/cm², nas tíbias direitas por 12 sessões de 20 minutos. Após o sacrifício, as tíbias foram submetidas à análise da Densidade Mineral Óssea (DMO). Os resultados demonstraram DMO de 0,139±0,018 g/cm² para tíbia tratada; 0,131±0,009 g/cm² para tíbia controle no G1; e no G2 registrou-se 0,120±0,009 g/cm² para tíbia tratada e 0,106±0,017 g/cm² para tíbia controle. Houve diferença significante entre os grupos nos quais o G2 apresentou menor DMO, o que demonstra que a suspensão prejudica a manutenção das propriedades ósseas, e entre as tíbias tratadas e controles do G2, demonstrando que o US acelerou o processo de reparo, concluindo que a impossibilidade do estímulo mecânico causada pela não deambulação em um processo de reparo ósseo pode ser minimizada pela ação do US. No G1, a aplicação do US não teve influência significante no aumento da DMO, talvez pelo fato dos animais já terem estímulo mecânico suficiente à formação óssea.

Processo de reparo em feridas de extração dentária em camundongos tratados com o complexo Symphytum officinale e Calendula officinallis

Medicamentos homeopáticos como o Symphytum officinalle e a Calendula officinallis são dotados de propriedades anti-sépticas, antiinflamatória, cicatrizantes e também agem como promotores da consolidação de fraturas ósseas. Neste trabalho, uniram-se esses dois medicamentos similares em um complexo para verificar o seu efeito no reparo em feridas de extração dentária em camundongos. O complexo Symphytum officinalle e Calendula officinallis nas potências de 6CH e 3CH, respectivamente, foi ministrado por via oral ao grupo tratado durante 5 dias antes e após a extração do incisivo superior direito. No grupo controle, administraram-se 5ml de álcool etílico a 70% diluídos em 30 ml de soro fisiológico. Após a proservação, os animais foram sacrificados, a maxila direita separada da esquerda, fixada e processada para inclusão em parafina. Após a microtomia, os cortes obtidos foram corados pela H/E. A análise histológica mostrou que, tanto no grupo controle como no tratado, o alvéolo dentário estava preenchido por tecido de granulação e tecido ósseo neoformado, com graus variáveis de maturação, rico em osteócitos. No entanto, nos animais tratados, o processo de reparo em feridas após extração dentária do incisivo superior direito mostrou um avanço progressivo de neoformação óssea mais acentuado quando comparado ao grupo controle, em tempos equivalentes. Estes resultados enfatizam as propriedades biológicas do complexo Symphytum officinalle e Calendula officinallis e sua possível utilização como recurso terapêutico na Odontologia.

Derivado cinamoílico com atividade no reparo de DNA e outras substâncias de Cinnamomum australe (Lauraceae)

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Eletroacupuntura no reparo do tendão calcanear comum em coelhos após enxertia com peritônio bovino

Avaliou-se o efeito da eletroacupuntura (EA) sobre os aspectos macroscópicos e microscópicos em 36 coelhos que tiveram o tendão calcanear comum seccionado e que, após 30 dias, receberam enxerto de peritônio bovino conservado em solução saturada de sal. Após a cirurgia, os animais foram distribuídos em três grupos de igual número: os do grupo E10 foram estimulados pela EA do segundo ao 11º dia de pós-operatório, os do grupo E20 do 11º ao 31º dia de pós-operatório e os do grupo C não foram estimulados. Posteriormente, os animais foram redistribuídos em três subgrupos de igual número, os quais foram observados no pós-operatório por 11, 31 e 91 dias. Nos coelhos do E10 e E20, ocorreu diminuição de aderência da área enxertada aos tecidos circunvizinhos. Aos 31 dias de pós-operatório, observou-se nos do E10 tecido conjuntivo. Verificou-se intensa neovascularização no local enxertado em todos os animais que receberam estímulo pela EA. Nos coelhos do E10, aos 91 dias, verificou-se intensa quantidade de tecido conjuntivo, com fibras colágenas organizadas e paralelas ao eixo do tendão. O estímulo pela EA na fase precoce do pós-operatório estimulou a maturação cicatricial com mínima reação inflamatória.

Alguns eventos morfológicos do processo de reparo de falha óssea diafisária no rádio esquerdo de ratos tratados com fenobarbital

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Propriedades mecânicas de três fios de sutura no reparo do tendão do músculo flexor profundo do dedo de cães

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Efeitos da estimulação ultra-sônica sobre o processo de reparo em ferida de extração dental: estudo histológico em ratos.

The effects of ultrasound on the wound healing process after teeth extractions were studied histologically. The right upper incisor was extracted in 56 rats. They were divided into 2 groups, one control (I) and one experimental (II). Group II received ultrasound stimulation that was applied with the frequency of repetition of 1,000 Hz and pulse length of 2,000 us continuously, during five minutes daily since the extraction day until 24 hours before the death. The rats were sacrificed at 3, 6, 9, 12, 15, 18, and 21 postoperative days. The results showed a precocious granulation tissue formation, faster remodeling of osseous ridges, and consequently acceleration of the alveolar wound healing process.

Implante de tendão autógeno do músculo flexor superficial dos dedos no reparo de desvio do pênis de bovines

In this experiment, 18 hybrid steers, from the ages between 16 and 20 months, were submitted to the removal of the penis apical ligament to provoke a penis deviation. After passed 30 days, to be tested, the animals were put together to the females that were in heat. It was verified the formation of the ventral and right lateral penis deviation with incapacity of the copula. The bovines were submitted to the autologous implant from the one following superficial portion tendon from the superficial flexor fingers muscle, on the top of albuginea tunic, replacing the apical penis ligament removed. The material implanted was well tolerated, appearance a few inflammatory cells and formation of the fibrous conjunctive tissue, causing resistant adherence and capacity of sustaining the free penis extremity. The bovines, when were among the females that were in heat, did not show a penis deviation nor sexual behavior modification. The method revealed itself satisfactory and it can be indicated to correct ventral and right lateral penis deviation in bovines.

Mapeamento geoambiental como subsídio na determinação de áreas de instabilidades da faixa de dutos Osvat/Osplan - São Sebastião, SP

Works of linear engineering such as roads, pipelines and transmission lines have specific mapping due to their large scale impact on the environment, thus requiring mapping methods that are both efficient and of low cost. This paper presents a proposal of Geoenvironmental mapping for works linear. The work chosen for the implementation of the method was the Osvat/Osplan pipeline located in the cities of São Sebastião and Caraguatatuba. The geoenvironment mapping was elaborate trough photo-interpretation of images of the ETM+/Landsat-7 sensor and analysis of the drainage network, thus resulting in the partitioning of the geoenvironmental units and the fracture area (structural lineaments and lines of strikes), these maps were subsequently integrated into a product called Map of environmental susceptibility to gravitational and erosive processes, which helped define the areas with potential geotechnical problems that could damage both the pipeline and the environment.